select HAVE_MEMBLOCK
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
- select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
+ select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
select HAVE_REGS_AND_STACK_ACCESS_API
- select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V7))
+ select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
select HAVE_C_RECORDMCOUNT
select HAVE_GENERIC_HARDIRQS
select HAVE_SPARSE_IRQ
depends on GENERIC_CLOCKEVENTS
default y if SMP
+config KTIME_SCALAR
+ bool
+ default y
+
config HAVE_TCM
bool
select GENERIC_ALLOCATOR
config ARCH_MTD_XIP
bool
-config ARM_L1_CACHE_SHIFT_6
- bool
- help
- Setting ARM L1 cache line size to 64 Bytes.
-
config VECTORS_BASE
hex
default 0xffff0000 if MMU || CPU_HIGH_VECTOR
help
The base address of exception vectors.
+config ARM_PATCH_PHYS_VIRT
+ bool "Patch physical to virtual translations at runtime (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ depends on !XIP_KERNEL && MMU
+ depends on !ARCH_REALVIEW || !SPARSEMEM
+ help
+ Patch phys-to-virt translation functions at runtime according to
+ the position of the kernel in system memory.
+
+ This can only be used with non-XIP with MMU kernels where
+ the base of physical memory is at a 16MB boundary.
+
+config ARM_PATCH_PHYS_VIRT_16BIT
+ def_bool y
+ depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM
+
source "init/Kconfig"
source "kernel/Kconfig.freezer"
prompt "ARM system type"
default ARCH_VERSATILE
-config ARCH_AAEC2000
- bool "Agilent AAEC-2000 based"
- select CPU_ARM920T
- select ARM_AMBA
- select HAVE_CLK
- select ARCH_USES_GETTIMEOFFSET
- help
- This enables support for systems based on the Agilent AAEC-2000
-
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select ARM_AMBA
select ICST
select GENERIC_CLOCKEVENTS
select PLAT_VERSATILE
+ select PLAT_VERSATILE_FPGA_IRQ
help
Support for ARM's Integrator platform.
bool "ARM Ltd. RealView family"
select ARM_AMBA
select CLKDEV_LOOKUP
- select HAVE_SCHED_CLOCK
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
select PLAT_VERSATILE
+ select PLAT_VERSATILE_CLCD
select ARM_TIMER_SP804
select GPIO_PL061 if GPIOLIB
help
select ARM_AMBA
select ARM_VIC
select CLKDEV_LOOKUP
- select HAVE_SCHED_CLOCK
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
select PLAT_VERSATILE
+ select PLAT_VERSATILE_CLCD
+ select PLAT_VERSATILE_FPGA_IRQ
select ARM_TIMER_SP804
help
This enables support for ARM Ltd Versatile board.
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
select HAVE_CLK
- select HAVE_SCHED_CLOCK
+ select HAVE_PATA_PLATFORM
select ICST
select PLAT_VERSATILE
+ select PLAT_VERSATILE_CLCD
help
This enables support for the ARM Ltd Versatile Express boards.
bool "FootBridge"
select CPU_SA110
select FOOTBRIDGE
- select ARCH_USES_GETTIMEOFFSET
+ select GENERIC_CLOCKEVENTS
help
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
config ARCH_DOVE
bool "Marvell Dove"
+ select CPU_V6K
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
help
Support for Telechips TCC ARM926-based systems.
-config ARCH_LH7A40X
- bool "Sharp LH7A40X"
- select CPU_ARM922T
- select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
- select ARCH_USES_GETTIMEOFFSET
- help
- Say Y here for systems based on one of the Sharp LH7A40X
- System on a Chip processors. These CPUs include an ARM922T
- core with a wide array of integrated devices for
- hand-held and low-power applications.
-
config ARCH_U300
bool "ST-Ericsson U300 Series"
depends on MMU
help
Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
+config ARCH_VT8500
+ bool "VIA/WonderMedia 85xx"
+ select CPU_ARM926T
+ select GENERIC_GPIO
+ select ARCH_HAS_CPUFREQ
+ select GENERIC_CLOCKEVENTS
+ select ARCH_REQUIRE_GPIOLIB
+ select HAVE_PWM
+ help
+ Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
endchoice
#
# Kconfigs may be included either alphabetically (according to the
# plat- suffix) or along side the corresponding mach-* source.
#
-source "arch/arm/mach-aaec2000/Kconfig"
-
source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-bcmring/Kconfig"
source "arch/arm/mach-ks8695/Kconfig"
-source "arch/arm/mach-lh7a40x/Kconfig"
-
source "arch/arm/mach-loki/Kconfig"
source "arch/arm/mach-lpc32xx/Kconfig"
source "arch/arm/mach-versatile/Kconfig"
source "arch/arm/mach-vexpress/Kconfig"
+source "arch/arm/plat-versatile/Kconfig"
+
+source "arch/arm/mach-vt8500/Kconfig"
source "arch/arm/mach-w90x900/Kconfig"
default y
config CPU_HAS_PMU
- depends on (CPU_V6 || CPU_V7 || XSCALE_PMU) && \
+ depends on (CPU_V6 || CPU_V6K || CPU_V7 || XSCALE_PMU) && \
(!ARCH_OMAP3 || OMAP3_EMU)
default y
bool
config ARM_ERRATA_411920
bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
- depends on CPU_V6
+ depends on CPU_V6 || CPU_V6K
help
Invalidation of the Instruction Cache operation can
fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
config PL310_ERRATA_588369
bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
- depends on CACHE_L2X0 && ARCH_OMAP4
+ depends on CACHE_L2X0
help
The PL310 L2 cache controller implements three types of Clean &
Invalidate maintenance operations: by Physical Address
clean operation followed immediately by an invalidate operation,
both performing to the same memory location. This functionality
is not correctly implemented in PL310 as clean lines are not
- invalidated as a result of these operations. Note that this errata
- uses Texas Instrument's secure monitor api.
+ invalidated as a result of these operations.
config ARM_ERRATA_720789
bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
tables. The workaround changes the TLB flushing routines to invalidate
entries regardless of the ASID.
+config PL310_ERRATA_727915
+ bool "Background Clean & Invalidate by Way operation can cause data corruption"
+ depends on CACHE_L2X0
+ help
+ PL310 implements the Clean & Invalidate by Way L2 cache maintenance
+ operation (offset 0x7FC). This operation runs in background so that
+ PL310 can handle normal accesses while it is in progress. Under very
+ rare circumstances, due to this erratum, write data can be lost when
+ PL310 treats a cacheable write transaction during a Clean &
+ Invalidate by Way operation.
+
config ARM_ERRATA_743622
bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
depends on CPU_V7
This has the same effect as the cache sync operation: store buffer
drain and waiting for all buffers empty.
+config ARM_ERRATA_754322
+ bool "ARM errata: possible faulty MMU translations following an ASID switch"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 754322 Cortex-A9 (r2p*,
+ r3p*) erratum. A speculative memory access may cause a page table walk
+ which starts prior to an ASID switch but completes afterwards. This
+ can populate the micro-TLB with a stale entry which may be hit with
+ the new ASID. This workaround places two dsb instructions in the mm
+ switching code so that no page table walks can cross the ASID switch.
+
+config ARM_ERRATA_754327
+ bool "ARM errata: no automatic Store Buffer drain"
+ depends on CPU_V7 && SMP
+ help
+ This option enables the workaround for the 754327 Cortex-A9 (prior to
+ r2p0) erratum. The Store Buffer does not have any automatic draining
+ mechanism and therefore a livelock may occur if an external agent
+ continuously polls a memory location waiting to observe an update.
+ This workaround defines cpu_relax() as smp_mb(), preventing correctly
+ written polling loops from denying visibility of updates to memory.
+
endmenu
source "arch/arm/common/Kconfig"
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL
+ depends on CPU_V6K || CPU_V7
depends on GENERIC_CLOCKEVENTS
depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
config THUMB2_KERNEL
bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)"
- depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL
+ depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL
select AEABI
select ARM_ASM_UNIFIED
help
If unsure, say N.
+config THUMB2_AVOID_R_ARM_THM_JUMP11
+ bool "Work around buggy Thumb-2 short branch relocations in gas"
+ depends on THUMB2_KERNEL && MODULES
+ default y
+ help
+ Various binutils versions can resolve Thumb-2 branches to
+ locally-defined, preemptible global symbols as short-range "b.n"
+ branch instructions.
+
+ This is a problem, because there's no guarantee the final
+ destination of the symbol, or any candidate locations for a
+ trampoline, are within range of the branch. For this reason, the
+ kernel does not support fixing up the R_ARM_THM_JUMP11 (102)
+ relocation in modules at all, and it makes little sense to add
+ support.
+
+ The symptom is that the kernel fails with an "unsupported
+ relocation" error when loading some modules.
+
+ Until fixed tools are available, passing
+ -fno-optimize-sibling-calls to gcc should prevent gcc generating
+ code which hits this problem, at the cost of a bit of extra runtime
+ stack usage in some cases.
+
+ The problem is described in more detail at:
+ https://bugs.launchpad.net/binutils-linaro/+bug/725126
+
+ Only Thumb-2 kernels are affected.
+
+ Unless you are sure your tools don't have this problem, say Y.
+
config ARM_ASM_UNIFIED
bool
Say Y here if you intend to execute your compressed kernel image
(zImage) directly from ROM or flash. If unsure, say N.
+config ZBOOT_ROM_MMCIF
+ bool "Include MMCIF loader in zImage (EXPERIMENTAL)"
+ depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL
+ help
+ Say Y here to include experimental MMCIF loading code in the
+ ROM-able zImage. With this enabled it is possible to write the
+ the ROM-able zImage kernel image to an MMC card and boot the
+ kernel straight from the reset vector. At reset the processor
+ Mask ROM will load the first part of the the ROM-able zImage
+ which in turn loads the rest the kernel image to RAM using the
+ MMCIF hardware block.
+
config CMDLINE
string "Default kernel command string"
default ""
config VFP
bool "VFP-format floating point maths"
- depends on CPU_V6 || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
+ depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
help
Say Y to include VFP support code in the kernel. This is needed
if your hardware includes a VFP unit.
git.openpandora.org / pandora-kernel.git / blobdiff