bool "Atmel AT91"
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
- select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
ACTLR register. Note that setting specific bits in the ACTLR register
may not be available in non-secure mode.
+config ARM_ERRATA_742230
+ bool "ARM errata: DMB operation may be faulty"
+ depends on CPU_V7 && SMP
+ help
+ This option enables the workaround for the 742230 Cortex-A9
+ (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
+ between two write operations may not ensure the correct visibility
+ ordering of the two writes. This workaround sets a specific bit in
+ the diagnostic register of the Cortex-A9 which causes the DMB
+ instruction to behave as a DSB, ensuring the correct behaviour of
+ the two writes.
+
+config ARM_ERRATA_742231
+ bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
+ depends on CPU_V7 && SMP
+ help
+ This option enables the workaround for the 742231 Cortex-A9
+ (r2p0..r2p2) erratum. Under certain conditions, specific to the
+ Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
+ accessing some data located in the same cache line, may get corrupted
+ data due to bad handling of the address hazard when the line gets
+ replaced from one of the CPUs at the same time as another CPU is
+ accessing it. This workaround sets specific bits in the diagnostic
+ register of the Cortex-A9 which reduces the linefill issuing
+ capabilities of the processor.
+
config PL310_ERRATA_588369
bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
depends on CACHE_L2X0 && ARCH_OMAP4
invalidated are not, resulting in an incoherency in the system page
tables. The workaround changes the TLB flushing routines to invalidate
entries regardless of the ASID.
+
+config ARM_ERRATA_743622
+ bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 743622 Cortex-A9
+ (r2p0..r2p2) erratum. Under very rare conditions, a faulty
+ optimisation in the Cortex-A9 Store Buffer may lead to data
+ corruption. This workaround sets a specific bit in the diagnostic
+ register of the Cortex-A9 which disables the Store Buffer
+ optimisation, preventing the defect from occurring. This has no
+ visible impact on the overall performance or power consumption of the
+ processor.
+
endmenu
source "arch/arm/common/Kconfig"
0xf8000000. This assumes the zImage being placed in the first 128MB
from start of memory.
-config ZRELADDR
- hex "Physical address of the decompressed kernel image"
- depends on !AUTO_ZRELADDR
- default 0x00008000 if ARCH_BCMRING ||\
- ARCH_CNS3XXX ||\
- ARCH_DOVE ||\
- ARCH_EBSA110 ||\
- ARCH_FOOTBRIDGE ||\
- ARCH_INTEGRATOR ||\
- ARCH_IOP13XX ||\
- ARCH_IOP33X ||\
- ARCH_IXP2000 ||\
- ARCH_IXP23XX ||\
- ARCH_IXP4XX ||\
- ARCH_KIRKWOOD ||\
- ARCH_KS8695 ||\
- ARCH_LOKI ||\
- ARCH_MMP ||\
- ARCH_MV78XX0 ||\
- ARCH_NOMADIK ||\
- ARCH_NUC93X ||\
- ARCH_NS9XXX ||\
- ARCH_ORION5X ||\
- ARCH_SPEAR3XX ||\
- ARCH_SPEAR6XX ||\
- ARCH_U8500 ||\
- ARCH_VERSATILE ||\
- ARCH_W90X900
- default 0x08008000 if ARCH_MX1 ||\
- ARCH_SHARK
- default 0x10008000 if ARCH_MSM ||\
- ARCH_OMAP1 ||\
- ARCH_RPC
- default 0x20008000 if ARCH_S5P6440 ||\
- ARCH_S5P6442 ||\
- ARCH_S5PC100 ||\
- ARCH_S5PV210
- default 0x30008000 if ARCH_S3C2410 ||\
- ARCH_S3C2400 ||\
- ARCH_S3C2412 ||\
- ARCH_S3C2416 ||\
- ARCH_S3C2440 ||\
- ARCH_S3C2443
- default 0x40008000 if ARCH_STMP378X ||\
- ARCH_STMP37XX ||\
- ARCH_SH7372 ||\
- ARCH_SH7377 ||\
- ARCH_S5PV310
- default 0x50008000 if ARCH_S3C64XX ||\
- ARCH_SH7367
- default 0x60008000 if ARCH_VEXPRESS
- default 0x80008000 if ARCH_MX25 ||\
- ARCH_MX3 ||\
- ARCH_NETX ||\
- ARCH_OMAP2PLUS ||\
- ARCH_PNX4008
- default 0x90008000 if ARCH_MX5 ||\
- ARCH_MX91231
- default 0xa0008000 if ARCH_IOP32X ||\
- ARCH_PXA ||\
- MACH_MX27
- default 0xc0008000 if ARCH_LH7A40X ||\
- MACH_MX21
- default 0xf0008000 if ARCH_AAEC2000 ||\
- ARCH_L7200
- default 0xc0028000 if ARCH_CLPS711X
- default 0x70008000 if ARCH_AT91 && (ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
- default 0x20008000 if ARCH_AT91 && !(ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
- default 0xc0008000 if ARCH_DAVINCI && ARCH_DAVINCI_DA8XX
- default 0x80008000 if ARCH_DAVINCI && !ARCH_DAVINCI_DA8XX
- default 0x00008000 if ARCH_EP93XX && EP93XX_SDCE3_SYNC_PHYS_OFFSET
- default 0xc0008000 if ARCH_EP93XX && EP93XX_SDCE0_PHYS_OFFSET
- default 0xd0008000 if ARCH_EP93XX && EP93XX_SDCE1_PHYS_OFFSET
- default 0xe0008000 if ARCH_EP93XX && EP93XX_SDCE2_PHYS_OFFSET
- default 0xf0008000 if ARCH_EP93XX && EP93XX_SDCE3_ASYNC_PHYS_OFFSET
- default 0x00008000 if ARCH_GEMINI && GEMINI_MEM_SWAP
- default 0x10008000 if ARCH_GEMINI && !GEMINI_MEM_SWAP
- default 0x70008000 if ARCH_REALVIEW && REALVIEW_HIGH_PHYS_OFFSET
- default 0x00008000 if ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET
- default 0xc0208000 if ARCH_SA1100 && SA1111
- default 0xc0008000 if ARCH_SA1100 && !SA1111
- default 0x30108000 if ARCH_S3C2410 && PM_H1940
- default 0x28E08000 if ARCH_U300 && MACH_U300_SINGLE_RAM
- default 0x48008000 if ARCH_U300 && !MACH_U300_SINGLE_RAM
- help
- ZRELADDR is the physical address where the decompressed kernel
- image will be placed. ZRELADDR has to be specified when the
- assumption of AUTO_ZRELADDR is not valid, or when ZBOOT_ROM is
- selected.
-
endmenu
menu "CPU Power Management"
git.openpandora.org / pandora-kernel.git / blobdiff