Merge with /home/tmlind/src/kernel/linux-2.6

[pandora-kernel.git] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f81a623..66a4a4c 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -17,6 +17,10 @@ config ARM
          Europe.  There is an ARM Linux project with a web page at
          <http://www.arm.linux.org.uk/>.
 
+config GENERIC_TIME
+       bool
+       default n
+
 config MMU
        bool
        default y
@@ -51,6 +55,10 @@ config GENERIC_HARDIRQS
        bool
        default y
 
+config TRACE_IRQFLAGS_SUPPORT
+       bool
+       default y
+
 config HARDIRQS_SW_RESEND
        bool
        default y
@@ -66,6 +74,14 @@ config RWSEM_GENERIC_SPINLOCK
 config RWSEM_XCHGADD_ALGORITHM
        bool
 
+config ARCH_HAS_ILOG2_U32
+       bool
+       default n
+
+config ARCH_HAS_ILOG2_U64
+       bool
+       default n
+
 config GENERIC_HWEIGHT
        bool
        default y
@@ -91,7 +107,7 @@ config ARCH_MTD_XIP
 
 config VECTORS_BASE
        hex
-       default 0xffff0000 if MMU
+       default 0xffff0000 if MMU || CPU_HIGH_VECTOR
        default DRAM_BASE if REMAP_VECTORS_TO_RAM
        default 0x00000000
        help
@@ -198,16 +214,33 @@ config ARCH_IMX
        help
          Support for Motorola's i.MX family of processors (MX1, MXL).
 
-config ARCH_IOP3XX
-       bool "IOP3xx-based"
+config ARCH_IOP32X
+       bool "IOP32x-based"
+       depends on MMU
+       select PLAT_IOP
+       select PCI
+       help
+         Support for Intel's 80219 and IOP32X (XScale) family of
+         processors.
+
+config ARCH_IOP33X
+       bool "IOP33x-based"
        depends on MMU
+       select PLAT_IOP
+       select PCI
+       help
+         Support for Intel's IOP33X (XScale) family of processors.
+
+config ARCH_IOP13XX
+       bool "IOP13xx-based"
        select PCI
        help
-         Support for Intel's IOP3XX (XScale) family of processors.
+         Support for Intel's IOP13XX (XScale) family of processors.
 
 config ARCH_IXP4XX
        bool "IXP4xx-based"
        depends on MMU
+       select GENERIC_TIME
        help
          Support for Intel's IXP4XX (XScale) family of processors.
 
@@ -308,7 +341,11 @@ source "arch/arm/mach-footbridge/Kconfig"
 
 source "arch/arm/mach-integrator/Kconfig"
 
-source "arch/arm/mach-iop3xx/Kconfig"
+source "arch/arm/mach-iop32x/Kconfig"
+
+source "arch/arm/mach-iop33x/Kconfig"
+
+source "arch/arm/mach-iop13xx/Kconfig"
 
 source "arch/arm/mach-ixp4xx/Kconfig"
 
@@ -348,8 +385,19 @@ source "arch/arm/mach-netx/Kconfig"
 config ARCH_ACORN
        bool
 
+config PLAT_IOP
+       bool
+
 source arch/arm/mm/Kconfig
 
+config IWMMXT
+       bool "Enable iWMMXt support"
+       depends CPU_XSCALE || CPU_XSC3
+       default y if PXA27x
+       help
+         Enable support for iWMMXt context switching at run time if
+         running on a CPU that supports it.
+
 #  bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER
 config XSCALE_PMU
        bool
@@ -559,7 +607,7 @@ config LEDS
                   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
                   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
                   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-                  ARCH_AT91RM9200 || MACH_TRIZEPS4
+                  ARCH_AT91 || MACH_TRIZEPS4
        help
          If you say Y here, the LEDs on your machine will be used
          to provide useful information about your current system status.
@@ -572,8 +620,7 @@ config LEDS
          system, but the driver will do nothing.
 
 config LEDS_TIMER
-       bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
-                           MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
+       bool "Timer LED" if !ARCH_CDB89712
        depends on LEDS
        default y if ARCH_EBSA110
        help
@@ -588,8 +635,7 @@ config LEDS_TIMER
          will overrule the CPU usage LED.
 
 config LEDS_CPU
-       bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
-                       !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
+       bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110)
        depends on LEDS
        help
          If you say Y here, the red LED will be used to give a good real
@@ -602,9 +648,10 @@ config LEDS_CPU
 
 config ALIGNMENT_TRAP
        bool
+       depends on CPU_CP15_MMU
        default y if !ARCH_EBSA110
        help
-         ARM processors can not fetch/store information which is not
+         ARM processors cannot fetch/store information which is not
          naturally aligned on the bus, i.e., a 4 byte fetch must start at an
          address divisible by 4. On 32-bit ARM processors, these non-aligned
          fetch/store instructions will be emulated in software if you say
@@ -633,11 +680,12 @@ config ZBOOT_ROM_BSS
        hex "Compressed ROM boot loader BSS address"
        default "0"
        help
-         The base address of 64KiB of read/write memory in the target
-         for the ROM-able zImage, which must be available while the
-         decompressor is running.  Platforms which normally make use of
-         ROM-able zImage formats normally set this to a suitable
-         value in their defconfig file.
+         The base address of an area of read/write memory in the target
+         for the ROM-able zImage which must be available while the
+         decompressor is running. It must be large enough to hold the
+         entire decompressed kernel plus an additional 128 KiB.
+         Platforms which normally make use of ROM-able zImage formats
+         normally set this to a suitable value in their defconfig file.
 
          If ZBOOT_ROM is not enabled, this has no effect.
 
@@ -690,7 +738,7 @@ config XIP_PHYS_ADDR
 
 endmenu
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX )
 
 menu "CPU Frequency scaling"
 
@@ -717,6 +765,15 @@ config CPU_FREQ_INTEGRATOR
 
          If in doubt, say Y.
 
+config CPU_FREQ_IMX
+       tristate "CPUfreq driver for i.MX CPUs"
+       depends on ARCH_IMX && CPU_FREQ
+       default n
+       help
+         This enables the CPUfreq driver for i.MX CPUs.
+
+         If in doubt, say N.
+
 endmenu
 
 endif
@@ -832,7 +889,7 @@ source "drivers/base/Kconfig"
 
 source "drivers/connector/Kconfig"
 
-if ALIGNMENT_TRAP
+if ALIGNMENT_TRAP || !CPU_CP15_MMU
 source "drivers/mtd/Kconfig"
 endif
 
@@ -844,7 +901,7 @@ source "drivers/block/Kconfig"
 
 source "drivers/acorn/block/Kconfig"
 
-if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
+if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \
        || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
        || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
        || ARCH_IXP23XX
@@ -853,6 +910,8 @@ endif
 
 source "drivers/scsi/Kconfig"
 
+source "drivers/ata/Kconfig"
+
 source "drivers/md/Kconfig"
 
 source "drivers/message/fusion/Kconfig"
@@ -893,12 +952,20 @@ source "drivers/video/Kconfig"
 
 source "sound/Kconfig"
 
+source "drivers/hid/Kconfig"
+
 source "drivers/usb/Kconfig"
 
 source "drivers/mmc/Kconfig"
 
 source "drivers/rtc/Kconfig"
 
+source "drivers/ssi/Kconfig"
+
+if ARCH_OMAP
+source "drivers/cbus/Kconfig"
+endif
+
 endmenu
 
 source "fs/Kconfig"