select HAVE_MEMBLOCK
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
- select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
+ select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
select HAVE_REGS_AND_STACK_ACCESS_API
- select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V7))
+ select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
select HAVE_C_RECORDMCOUNT
select HAVE_GENERIC_HARDIRQS
select HAVE_SPARSE_IRQ
help
The base address of exception vectors.
+config ARM_PATCH_PHYS_VIRT
+ bool "Patch physical to virtual translations at runtime (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ depends on !XIP_KERNEL && MMU
+ depends on !ARCH_REALVIEW || !SPARSEMEM
+ help
+ Patch phys-to-virt translation functions at runtime according to
+ the position of the kernel in system memory.
+
+ This can only be used with non-XIP with MMU kernels where
+ the base of physical memory is at a 16MB boundary.
+
+config ARM_PATCH_PHYS_VIRT_16BIT
+ def_bool y
+ depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM
+
source "init/Kconfig"
source "kernel/Kconfig.freezer"
prompt "ARM system type"
default ARCH_VERSATILE
-config ARCH_AAEC2000
- bool "Agilent AAEC-2000 based"
- select CPU_ARM920T
- select ARM_AMBA
- select HAVE_CLK
- select ARCH_USES_GETTIMEOFFSET
- help
- This enables support for systems based on the Agilent AAEC-2000
-
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select ARM_AMBA
config ARCH_DOVE
bool "Marvell Dove"
+ select CPU_V6K
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
+ select CLKDEV_LOOKUP
help
Support for Qualcomm MSM/QSD based systems. This runs on the
apps processor of the MSM/QSD and depends on a shared memory
select GENERIC_GPIO
select HAVE_CLK
select HAVE_S3C2410_WATCHDOG if WATCHDOG
- select ARCH_USES_GETTIMEOFFSET
+ select GENERIC_CLOCKEVENTS
+ select HAVE_SCHED_CLOCK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
help
select HAVE_CLK
select ARM_L1_CACHE_SHIFT_6
select ARCH_HAS_CPUFREQ
- select ARCH_USES_GETTIMEOFFSET
+ select GENERIC_CLOCKEVENTS
+ select HAVE_SCHED_CLOCK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S5PV210/S5PC110 series based systems
-config ARCH_S5PV310
- bool "Samsung S5PV310/S5PC210"
+config ARCH_EXYNOS4
+ bool "Samsung EXYNOS4"
select CPU_V7
select ARCH_SPARSEMEM_ENABLE
select GENERIC_GPIO
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
- Samsung S5PV310 series based systems
+ Samsung EXYNOS4 series based systems
config ARCH_SHARK
bool "Shark"
help
Support for Telechips TCC ARM926-based systems.
-config ARCH_LH7A40X
- bool "Sharp LH7A40X"
- select CPU_ARM922T
- select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
- select ARCH_USES_GETTIMEOFFSET
- help
- Say Y here for systems based on one of the Sharp LH7A40X
- System on a Chip processors. These CPUs include an ARM922T
- core with a wide array of integrated devices for
- hand-held and low-power applications.
-
config ARCH_U300
bool "ST-Ericsson U300 Series"
depends on MMU
# Kconfigs may be included either alphabetically (according to the
# plat- suffix) or along side the corresponding mach-* source.
#
-source "arch/arm/mach-aaec2000/Kconfig"
-
source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-bcmring/Kconfig"
source "arch/arm/mach-ks8695/Kconfig"
-source "arch/arm/mach-lh7a40x/Kconfig"
-
source "arch/arm/mach-loki/Kconfig"
source "arch/arm/mach-lpc32xx/Kconfig"
source "arch/arm/mach-s5pv210/Kconfig"
-source "arch/arm/mach-s5pv310/Kconfig"
+source "arch/arm/mach-exynos4/Kconfig"
source "arch/arm/mach-shmobile/Kconfig"
default y
config CPU_HAS_PMU
- depends on (CPU_V6 || CPU_V7 || XSCALE_PMU) && \
+ depends on (CPU_V6 || CPU_V6K || CPU_V7 || XSCALE_PMU) && \
(!ARCH_OMAP3 || OMAP3_EMU)
default y
bool
config ARM_ERRATA_411920
bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
- depends on CPU_V6
+ depends on CPU_V6 || CPU_V6K
help
Invalidation of the Instruction Cache operation can
fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL
+ depends on CPU_V6K || CPU_V7
depends on GENERIC_CLOCKEVENTS
depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
- ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
+ ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE
select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
bool "Use local timer interrupts"
depends on SMP
default y
- select HAVE_ARM_TWD if !ARCH_MSM_SCORPIONMP
+ select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT)
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
config HZ
int
default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
- ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310
+ ARCH_S5P6442 || ARCH_S5PV210 || ARCH_EXYNOS4
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91
default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
config THUMB2_KERNEL
bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)"
- depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL
+ depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL
select AEABI
select ARM_ASM_UNIFIED
help
config VFP
bool "VFP-format floating point maths"
- depends on CPU_V6 || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
+ depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
help
Say Y to include VFP support code in the kernel. This is needed
if your hardware includes a VFP unit.
git.openpandora.org / pandora-kernel.git / blobdiff