Merge branch 'drm-forlinus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...

[pandora-kernel.git] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3bfef09..50b9afa 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -46,10 +46,6 @@ config MCA
          <file:Documentation/mca.txt> (and especially the web page given
          there) before attempting to build an MCA bus kernel.
 
-config UID16
-       bool
-       default y
-
 config RWSEM_GENERIC_SPINLOCK
        bool
        default y
@@ -103,13 +99,6 @@ config ARCH_EBSA110
          Ethernet interface, two PCMCIA sockets, two serial ports and a
          parallel port.
 
-config ARCH_CAMELOT
-       bool "Epxa10db"
-       help
-         This enables support for Altera's Excalibur XA10 development board.
-         If you would like to build your kernel to run on one of these boards
-         then you must say 'Y' here. Otherwise say 'N'
-
 config ARCH_FOOTBRIDGE
        bool "FootBridge"
        select FOOTBRIDGE
@@ -154,6 +143,7 @@ config ARCH_RPC
        select FIQ
        select TIMER_ACORN
        select ARCH_MAY_HAVE_PC_FDC
+       select ISA_DMA_API
        help
          On the Acorn Risc-PC, Linux can support the internal IDE disk and
          CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -206,6 +196,7 @@ config ARCH_IMX
 
 config ARCH_H720X
        bool "Hynix-HMS720x-based"
+       select ISA_DMA_API
        help
          This enables support for systems based on the Hynix HMS720x
 
@@ -215,12 +206,16 @@ config ARCH_AAEC2000
        help
          This enables support for systems based on the Agilent AAEC-2000
 
+config ARCH_AT91RM9200
+       bool "AT91RM9200"
+       help
+         Say Y here if you intend to run this kernel on an AT91RM9200-based
+         board.
+
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
 
-source "arch/arm/mach-epxa10db/Kconfig"
-
 source "arch/arm/mach-footbridge/Kconfig"
 
 source "arch/arm/mach-integrator/Kconfig"
@@ -239,6 +234,8 @@ source "arch/arm/plat-omap/Kconfig"
 
 source "arch/arm/mach-omap1/Kconfig"
 
+source "arch/arm/mach-omap2/Kconfig"
+
 source "arch/arm/mach-s3c2410/Kconfig"
 
 source "arch/arm/mach-lh7a40x/Kconfig"
@@ -253,6 +250,8 @@ source "arch/arm/mach-aaec2000/Kconfig"
 
 source "arch/arm/mach-realview/Kconfig"
 
+source "arch/arm/mach-at91rm9200/Kconfig"
+
 # Definitions to make life easier
 config ARCH_ACORN
        bool
@@ -288,12 +287,14 @@ config ISA
          (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
          newer boards don't support it.  If you have ISA, say Y, otherwise N.
 
+# Select ISA DMA controller support
 config ISA_DMA
        bool
+       select ISA_DMA_API
 
+# Select ISA DMA interface
 config ISA_DMA_API
        bool
-       default y
 
 config PCI
        bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB
@@ -358,7 +359,7 @@ config HOTPLUG_CPU
 
 config LOCAL_TIMERS
        bool "Use local timer interrupts"
-       depends on SMP && n
+       depends on SMP && REALVIEW_MPCORE
        default y
        help
          Enable support for local timers on SMP platforms, rather then the
@@ -416,7 +417,8 @@ config LEDS
                   ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
                   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
                   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
-                  ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE
+                  ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
+                  ARCH_AT91RM9200
        help
          If you say Y here, the LEDs on your machine will be used
          to provide useful information about your current system status.
@@ -650,25 +652,10 @@ endmenu
 
 menu "Power management options"
 
-config PM
-       bool "Power Management support"
-       ---help---
-         "Power Management" means that parts of your computer are shut
-         off or put into a power conserving "sleep" mode if they are not
-         being used.  There are two competing standards for doing this: APM
-         and ACPI.  If you want to use either one, say Y here and then also
-         to the requisite support below.
-
-         Power Management is most important for battery powered laptop
-         computers; if you have a laptop, check out the Linux Laptop home
-         page on the WWW at <http://www.linux-on-laptops.com/> or
-         Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>
-         and the Battery Powered Linux mini-HOWTO, available from
-         <http://www.tldp.org/docs.html#howto>.
+source "kernel/power/Kconfig"
 
 config APM
        tristate "Advanced Power Management Emulation"
-       depends on PM
        ---help---
          APM is a BIOS specification for saving power using several different
          techniques. This is mostly useful for battery powered laptops with
@@ -700,6 +687,8 @@ menu "Device Drivers"
 
 source "drivers/base/Kconfig"
 
+source "drivers/connector/Kconfig"
+
 if ALIGNMENT_TRAP
 source "drivers/mtd/Kconfig"
 endif