select HAVE_KPROBES if (!XIP_KERNEL)
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
+ select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
+ select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
select HAVE_GENERIC_DMA_COHERENT
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZO
select HAVE_KERNEL_LZMA
+ select HAVE_IRQ_WORK
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
select HAVE_REGS_AND_STACK_ACCESS_API
+ select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V7))
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
and that the relevant menu configurations are displayed for
it.
+config ARCH_HAS_CPU_IDLE_WAIT
+ def_bool y
+
config GENERIC_HWEIGHT
bool
default y
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
select PLAT_PXA
+ select SPARSE_IRQ
help
Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
select PLAT_PXA
+ select SPARSE_IRQ
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
help
Samsung S3C64XX series based systems
-config ARCH_S5P6440
- bool "Samsung S5P6440"
+config ARCH_S5P64X0
+ bool "Samsung S5P6440 S5P6450"
select CPU_V6
select GENERIC_GPIO
select HAVE_CLK
select HAVE_S3C2410_I2C
select HAVE_S3C_RTC
help
- Samsung S5P6440 CPU based systems
+ Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
+ SMDK6450.
config ARCH_S5P6442
bool "Samsung S5P6442"
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
+config ARCH_TCC_926
+ bool "Telechips TCC ARM926-based systems"
+ select CPU_ARM926T
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ select GENERIC_CLOCKEVENTS
+ help
+ Support for Telechips TCC ARM926-based systems.
+
config ARCH_LH7A40X
bool "Sharp LH7A40X"
select CPU_ARM922T
source "arch/arm/plat-spear/Kconfig"
+source "arch/arm/plat-tcc/Kconfig"
+
if ARCH_S3C2410
source "arch/arm/mach-s3c2400/Kconfig"
source "arch/arm/mach-s3c2410/Kconfig"
source "arch/arm/mach-s3c64xx/Kconfig"
endif
-source "arch/arm/mach-s5p6440/Kconfig"
+source "arch/arm/mach-s5p64x0/Kconfig"
source "arch/arm/mach-s5p6442/Kconfig"
config ARM_ERRATA_411920
bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
- depends on CPU_V6 && !SMP
+ depends on CPU_V6
help
Invalidation of the Instruction Cache operation can
fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
- depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
- MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
- ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
+ depends on EXPERIMENTAL
depends on GENERIC_CLOCKEVENTS
+ depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
+ MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
+ ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
select USE_GENERIC_SMP_HELPERS
- select HAVE_ARM_SCU if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 ||\
- ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
+ select HAVE_ARM_SCU
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
If you don't know what to do here, say N.
+config SMP_ON_UP
+ bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ depends on SMP && !XIP && !THUMB2_KERNEL
+ default y
+ help
+ SMP kernels contain instructions which fail on non-SMP processors.
+ Enabling this option allows the kernel to modify itself to make
+ these instructions safe. Disabling it allows about 1K of space
+ savings.
+
+ If you don't know what to do here, say Y.
+
config HAVE_ARM_SCU
bool
depends on SMP
config LOCAL_TIMERS
bool "Use local timer interrupts"
- depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
- REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
- ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
+ depends on SMP
default y
- select HAVE_ARM_TWD if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 || \
- ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS
+ select HAVE_ARM_TWD
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
config HZ
int
- default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || \
+ default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91
However, if the CPU data cache is using a write-allocate mode,
this option is unlikely to provide any performance gain.
+config SECCOMP
+ bool
+ prompt "Enable seccomp to safely compute untrusted bytecode"
+ ---help---
+ This kernel feature is useful for number crunching applications
+ that may need to compute untrusted bytecode during their
+ execution. By using pipes or other transports made available to
+ the process as file descriptors supporting the read/write
+ syscalls, it's possible to isolate those applications in
+ their own address space using seccomp. Once seccomp is
+ enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
+ and the task is only allowed to execute a few safe syscalls
+ defined by each seccomp mode.
+
config CC_STACKPROTECTOR
bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
help
git.openpandora.org / pandora-kernel.git / blobdiff