select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
- select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
+ select HAVE_KPROBES if !XIP_KERNEL
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
Europe. There is an ARM Linux project with a web page at
<http://www.arm.linux.org.uk/>.
+config ARM_HAS_SG_CHAIN
+ bool
+
config HAVE_PWM
bool
bool "Atmel AT91"
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
+ select CLKDEV_LOOKUP
+ select ARM_PATCH_PHYS_VIRT if MMU
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
select NO_IOPORT
select SPARSE_IRQ
select MULTI_IRQ_HANDLER
+ select PM_GENERIC_DOMAINS if PM
help
Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
SMDK6450.
-config ARCH_S5P6442
- bool "Samsung S5P6442"
- select CPU_V6
- select GENERIC_GPIO
- select HAVE_CLK
- select ARCH_USES_GETTIMEOFFSET
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
- help
- Samsung S5P6442 CPU based systems
-
config ARCH_S5PC100
bool "Samsung S5PC100"
select GENERIC_GPIO
source "arch/arm/mach-s5p64x0/Kconfig"
-source "arch/arm/mach-s5p6442/Kconfig"
-
source "arch/arm/mach-s5pc100/Kconfig"
source "arch/arm/mach-s5pv210/Kconfig"
config HAVE_ARM_SCU
bool
- depends on SMP
help
This option enables support for the ARM system coherency unit
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
depends on SMP && HOTPLUG && EXPERIMENTAL
- depends on !ARCH_MSM
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
config HZ
int
default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
- ARCH_S5P6442 || ARCH_S5PV210 || ARCH_EXYNOS4
+ ARCH_S5PV210 || ARCH_EXYNOS4
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91
default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
config ARCH_SELECT_MEMORY_MODEL
def_bool ARCH_SPARSEMEM_ENABLE
+config HAVE_ARCH_PFN_VALID
+ def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
+
config HIGHMEM
bool "High Memory Support"
depends on MMU
menu "Boot options"
+config USE_OF
+ bool "Flattened Device Tree support"
+ select OF
+ select OF_EARLY_FLATTREE
+ help
+ Include support for flattened device tree machine descriptions.
+
# Compressed boot loader in ROM. Yes, we really want to ask about
# TEXT and BSS so we preserve their values in the config files.
config ZBOOT_ROM_TEXT
Say Y here if you intend to execute your compressed kernel image
(zImage) directly from ROM or flash. If unsure, say N.
+choice
+ prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)"
+ depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL
+ default ZBOOT_ROM_NONE
+ help
+ Include experimental SD/MMC loading code in the ROM-able zImage.
+ With this enabled it is possible to write the the ROM-able zImage
+ kernel image to an MMC or SD card and boot the kernel straight
+ from the reset vector. At reset the processor Mask ROM will load
+ the first part of the the ROM-able zImage which in turn loads the
+ rest the kernel image to RAM.
+
+config ZBOOT_ROM_NONE
+ bool "No SD/MMC loader in zImage (EXPERIMENTAL)"
+ help
+ Do not load image from SD or MMC
+
config ZBOOT_ROM_MMCIF
bool "Include MMCIF loader in zImage (EXPERIMENTAL)"
- depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL
help
- Say Y here to include experimental MMCIF loading code in the
- ROM-able zImage. With this enabled it is possible to write the
- the ROM-able zImage kernel image to an MMC card and boot the
- kernel straight from the reset vector. At reset the processor
- Mask ROM will load the first part of the the ROM-able zImage
- which in turn loads the rest the kernel image to RAM using the
- MMCIF hardware block.
+ Load image from MMCIF hardware block.
+
+config ZBOOT_ROM_SH_MOBILE_SDHI
+ bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)"
+ help
+ Load image from SDHI hardware block
+
+endchoice
config CMDLINE
string "Default kernel command string"
source "kernel/power/Kconfig"
config ARCH_SUSPEND_POSSIBLE
- depends on !ARCH_S5P64X0 && !ARCH_S5P6442 && !ARCH_S5PC100
+ depends on !ARCH_S5P64X0 && !ARCH_S5PC100
depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
def_bool y