Merge branch 'for-2.6.39' of git://linux-nfs.org/~bfields/linux

[pandora-kernel.git] / Documentation / video4linux / zc0301.txt

diff --git a/Documentation/video4linux/zc0301.txt b/Documentation/video4linux/zc0301.txt
index f406f5e..b41c83c 100644 (file)
--- a/Documentation/video4linux/zc0301.txt
+++ b/Documentation/video4linux/zc0301.txt
@@ -23,7 +23,7 @@ Index
 
 1. Copyright
 ============
-Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>
+Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it>
 
 
 2. Disclaimer
@@ -125,8 +125,9 @@ And finally:
 6. Module loading
 =================
 To use the driver, it is necessary to load the "zc0301" module into memory
-after every other module required: "videodev", "usbcore" and, depending on
-the USB host controller you have, "ehci-hcd", "uhci-hcd" or "ohci-hcd".
+after every other module required: "videodev", "v4l2_common", "compat_ioctl32",
+"usbcore" and, depending on the USB host controller you have, "ehci-hcd",
+"uhci-hcd" or "ohci-hcd".
 
 Loading can be done as shown below:
 
@@ -180,10 +181,10 @@ Syntax:         <n>
 Description:    Debugging information level, from 0 to 3:
                0 = none (use carefully)
                1 = critical errors
-               2 = significant informations
+               2 = significant information
                3 = more verbose messages
                Level 3 is useful for testing only, when only one device
-               is used at the same time. It also shows some more informations
+               is used at the same time. It also shows some information
                about the hardware being detected. This module parameter can be
                changed at runtime thanks to the /sys filesystem interface.
 Default:        2
@@ -211,12 +212,11 @@ Vendor ID  Product ID
 0x041e     0x4036
 0x041e     0x403a
 0x0458     0x7007
-0x0458     0x700C
+0x0458     0x700c
 0x0458     0x700f
 0x046d     0x08ae
 0x055f     0xd003
 0x055f     0xd004
-0x046d     0x08ae
 0x0ac8     0x0301
 0x0ac8     0x301b
 0x0ac8     0x303b
@@ -261,7 +261,7 @@ the fingerprint is: '88E8 F32F 7244 68BA 3958  5D40 99DA 5D2A FCE6 35A4'.
 
 11. Credits
 ===========
-- Informations about the chip internals needed to enable the I2C protocol have
+- Information about the chip internals needed to enable the I2C protocol have
   been taken from the documentation of the ZC030x Video4Linux1 driver written
   by Andrew Birkett <andy@nobugs.org>;
 - The initialization values of the ZC0301 controller connected to the PAS202BCB