Merge branch 'stable-3.2' into pandora-3.2

[pandora-kernel.git] / Documentation / video4linux / ov511.txt

diff --git a/Documentation/video4linux/ov511.txt b/Documentation/video4linux/ov511.txt
index 142741e..b3326b1 100644 (file)
--- a/Documentation/video4linux/ov511.txt
+++ b/Documentation/video4linux/ov511.txt
@@ -81,7 +81,7 @@ MODULE PARAMETERS:
   TYPE: integer (Boolean)
   DEFAULT: 1
   DESC: Brightness is normally under automatic control and can't be set
-        manually by the video app. Set to 0 for manual control.
+       manually by the video app. Set to 0 for manual control.
 
   NAME: autogain
   TYPE: integer (Boolean)
@@ -97,13 +97,13 @@ MODULE PARAMETERS:
   TYPE: integer (0-6)
   DEFAULT: 3
   DESC: Sets the threshold for printing debug messages. The higher the value,
-        the more is printed. The levels are cumulative, and are as follows:
-          0=no debug messages
-          1=init/detection/unload and other significant messages
-          2=some warning messages
-          3=config/control function calls
-          4=most function calls and data parsing messages
-          5=highly repetitive mesgs
+       the more is printed. The levels are cumulative, and are as follows:
+         0=no debug messages
+         1=init/detection/unload and other significant messages
+         2=some warning messages
+         3=config/control function calls
+         4=most function calls and data parsing messages
+         5=highly repetitive mesgs
 
   NAME: snapshot
   TYPE: integer (Boolean)
@@ -116,24 +116,24 @@ MODULE PARAMETERS:
   TYPE: integer (1-4 for OV511, 1-31 for OV511+)
   DEFAULT: 1
   DESC: Number of cameras allowed to stream simultaneously on a single bus.
-        Values higher than 1 reduce the data rate of each camera, allowing two
-        or more to be used at once. If you have a complicated setup involving
-        both OV511 and OV511+ cameras, trial-and-error may be necessary for
-        finding the optimum setting.
+       Values higher than 1 reduce the data rate of each camera, allowing two
+       or more to be used at once. If you have a complicated setup involving
+       both OV511 and OV511+ cameras, trial-and-error may be necessary for
+       finding the optimum setting.
 
   NAME: compress
   TYPE: integer (Boolean)
   DEFAULT: 0
   DESC: Set this to 1 to turn on the camera's compression engine. This can
-        potentially increase the frame rate at the expense of quality, if you
-        have a fast CPU. You must load the proper compression module for your
-        camera before starting your application (ov511_decomp or ov518_decomp).
+       potentially increase the frame rate at the expense of quality, if you
+       have a fast CPU. You must load the proper compression module for your
+       camera before starting your application (ov511_decomp or ov518_decomp).
 
   NAME: testpat
   TYPE: integer (Boolean)
   DEFAULT: 0
   DESC: This configures the camera's sensor to transmit a colored test-pattern
-        instead of an image. This does not work correctly yet.
+       instead of an image. This does not work correctly yet.
 
   NAME: dumppix
   TYPE: integer (0-2)
@@ -195,11 +195,11 @@ MODULE PARAMETERS:
   NAME: bandingfilter
   TYPE: integer (Boolean)
   DEFAULT: 0 (off)
-  DESC: Enables the sensor´s banding filter exposure algorithm. This reduces
+  DESC: Enables the sensor´s banding filter exposure algorithm. This reduces
        or stabilizes the "banding" caused by some artificial light sources
        (especially fluorescent). You might have to set lightfreq correctly for
        this to work right. As an added bonus, this sometimes makes it
-       possible to capture your monitor´s output.
+       possible to capture your monitor´s output.
 
   NAME: fastset
   TYPE: integer (Boolean)