timesource is not avalible, it defaults to PIT.
Format: { pit | tsc | cyclone | pmtmr }
+ disable_8254_timer
+ enable_8254_timer
+ [IA32/X86_64] Disable/Enable interrupt 0 timer routing
+ over the 8254 in addition to over the IO-APIC. The
+ kernel tries to set a sensible default.
+
hpet= [IA-32,HPET] option to disable HPET and use PIT.
Format: disable
eata= [HW,SCSI]
+ ec_intr= [HW,ACPI] ACPI Embedded Controller interrupt mode
+ Format: <int>
+ 0: polling mode
+ non-0: interrupt mode (default)
+
eda= [HW,PS2]
edb= [HW,PS2]
arch/i386/kernel/cpu/cpufreq/elanfreq.c.
elevator= [IOSCHED]
- Format: {"as" | "cfq" | "deadline" | "noop"}
+ Format: {"anticipatory" | "cfq" | "deadline" | "noop"}
See Documentation/block/as-iosched.txt and
Documentation/block/deadline-iosched.txt for details.
- elfcorehdr= [IA-32]
+ elfcorehdr= [IA-32, X86_64]
Specifies physical address of start of kernel core
- image elf header.
- See Documentation/kdump.txt for details.
+ image elf header. Generally kexec loader will
+ pass this option to capture kernel.
+ See Documentation/kdump/kdump.txt for details.
enforcing [SELINUX] Set initial enforcing status.
Format: {"0" | "1"}
load_ramdisk= [RAM] List of ramdisks to load from floppy
See Documentation/ramdisk.txt.
- lockd.udpport= [NFS]
+ lockd.nlm_grace_period=P [NFS] Assign grace period.
+ Format: <integer>
- lockd.tcpport= [NFS]
+ lockd.nlm_tcpport=N [NFS] Assign TCP port.
+ Format: <integer>
+
+ lockd.nlm_timeout=T [NFS] Assign timeout value.
+ Format: <integer>
+
+ lockd.nlm_udpport=M [NFS] Assign UDP port.
+ Format: <integer>
logibm.irq= [HW,MOUSE] Logitech Bus Mouse Driver
Format: <irq>
mem=nopentium [BUGS=IA-32] Disable usage of 4MB pages for kernel
memory.
- memmap=exactmap [KNL,IA-32] Enable setting of an exact
+ memmap=exactmap [KNL,IA-32,X86_64] Enable setting of an exact
E820 memory map, as specified by the user.
Such memmap=exactmap lines can be constructed based on
BIOS output or other requirements. See the memmap=nn@ss
mga= [HW,DRM]
+ migration_cost=
+ [KNL,SMP] debug: override scheduler migration costs
+ Format: <level-1-usecs>,<level-2-usecs>,...
+ This debugging option can be used to override the
+ default scheduler migration cost matrix. The numbers
+ are indexed by 'CPU domain distance'.
+ E.g. migration_cost=1000,2000,3000 on an SMT NUMA
+ box will set up an intra-core migration cost of
+ 1 msec, an inter-core migration cost of 2 msecs,
+ and an inter-node migration cost of 3 msecs.
+
+ WARNING: using the wrong values here can break
+ scheduler performance, so it's only for scheduler
+ development purposes, not production environments.
+
+ migration_debug=
+ [KNL,SMP] migration cost auto-detect verbosity
+ Format=<0|1|2>
+ If a system's migration matrix reported at bootup
+ seems erroneous then this option can be used to
+ increase verbosity of the detection process.
+ We default to 0 (no extra messages), 1 will print
+ some more information, and 2 will be really
+ verbose (probably only useful if you also have a
+ serial console attached to the system).
+
+ migration_factor=
+ [KNL,SMP] multiply/divide migration costs by a factor
+ Format=<percent>
+ This debug option can be used to proportionally
+ increase or decrease the auto-detected migration
+ costs for all entries of the migration matrix.
+ E.g. migration_factor=150 will increase migration
+ costs by 50%. (and thus the scheduler will be less
+ eager migrating cache-hot tasks)
+ migration_factor=80 will decrease migration costs
+ by 20%. (thus the scheduler will be more eager to
+ migrate tasks)
+
+ WARNING: using the wrong values here can break
+ scheduler performance, so it's only for scheduler
+ development purposes, not production environments.
+
mousedev.tap_time=
[MOUSE] Maximum time between finger touching and
leaving touchpad surface for touch to be considered
nomce [IA-32] Machine Check Exception
+ nomca [IA-64] Disable machine check abort handling
+
noresidual [PPC] Don't use residual data on PReP machines.
noresume [SWSUSP] Disables resume and restores original swap
nowb [ARM]
+ nr_uarts= [SERIAL] maximum number of UARTs to be registered.
+
opl3= [HW,OSS]
Format: <io>
Mechanism 1.
conf2 [IA-32] Force use of PCI Configuration
Mechanism 2.
+ nommconf [IA-32,X86_64] Disable use of MMCONFIG for PCI
+ Configuration
nosort [IA-32] Don't sort PCI devices according to
order given by the PCI BIOS. This sorting is
done to get a device order compatible with
Limit processor to maximum C-state
max_cstate=9 overrides any DMI blacklist limit.
+ processor.nocst [HW,ACPI]
+ Ignore the _CST method to determine C-states,
+ instead using the legacy FADT method
+
prompt_ramdisk= [RAM] List of RAM disks to prompt for floppy disk
before loading.
See Documentation/ramdisk.txt.
New name for the ramdisk parameter.
See Documentation/ramdisk.txt.
+ rcu.blimit= [KNL,BOOT] Set maximum number of finished
+ RCU callbacks to process in one batch.
+
+ rcu.qhimark= [KNL,BOOT] Set threshold of queued
+ RCU callbacks over which batch limiting is disabled.
+
+ rcu.qlowmark= [KNL,BOOT] Set threshold of queued
+ RCU callbacks below which batch limiting is re-enabled.
+
+ rcu.rsinterval= [KNL,BOOT,SMP] Set the number of additional
+ RCU callbacks to queued before forcing reschedule
+ on all cpus.
+
rdinit= [KNL]
Format: <full_path>
Run specified binary instead of /init from the ramdisk,
Format:
<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
+ norandmaps Don't use address space randomization
+ Equivalent to echo 0 > /proc/sys/kernel/randomize_va_space
+
______________________________________________________________________
Changelog:
git.openpandora.org / pandora-kernel.git / blobdiff