PCI: remove initial bios sort of PCI devices on x86

[pandora-kernel.git] / Documentation / kernel-parameters.txt

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 622f784..e30d8fe 100644 (file)
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -170,11 +170,6 @@ and is between 256 and 4096 characters. It is defined in the file
        acpi_irq_isa=   [HW,ACPI] If irq_balance, mark listed IRQs used by ISA
                        Format: <irq>,<irq>...
 
-       acpi_new_pts_ordering [HW,ACPI]
-                       Enforce the ACPI 2.0 ordering of the _PTS control
-                       method wrt putting devices into low power states
-                       default: pre ACPI 2.0 ordering of _PTS
-
        acpi_no_auto_ssdt       [HW,ACPI] Disable automatic loading of SSDT
 
        acpi_os_name=   [HW,ACPI] Tell ACPI BIOS the name of the OS
@@ -371,6 +366,12 @@ and is between 256 and 4096 characters. It is defined in the file
                        possible to determine what the correct size should be.
                        This option provides an override for these situations.
 
+       security=       [SECURITY] Choose a security module to enable at boot.
+                       If this boot parameter is not specified, only the first
+                       security module asking for security registration will be
+                       loaded. An invalid security module name will be treated
+                       as if no module has been chosen.
+
        capability.disable=
                        [SECURITY] Disable capabilities.  This would normally
                        be used only if an alternative security model is to be
@@ -380,6 +381,10 @@ and is between 256 and 4096 characters. It is defined in the file
        ccw_timeout_log [S390]
                        See Documentation/s390/CommonIO for details.
 
+       cgroup_disable= [KNL] Disable a particular controller
+                       Format: {name of the controller(s) to disable}
+                               {Currently supported controllers - "memory"}
+
        checkreqprot    [SELINUX] Set initial checkreqprot flag value.
                        Format: { "0" | "1" }
                        See security/selinux/Kconfig help text.
@@ -732,6 +737,8 @@ and is between 256 and 4096 characters. It is defined in the file
                             (Don't attempt to blink the leds)
        i8042.noaux     [HW] Don't check for auxiliary (== mouse) port
        i8042.nokbd     [HW] Don't check/create keyboard port
+       i8042.noloop    [HW] Disable the AUX Loopback command while probing
+                            for the AUX port
        i8042.nomux     [HW] Don't check presence of an active multiplexing
                             controller
        i8042.nopnp     [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
@@ -762,11 +769,11 @@ and is between 256 and 4096 characters. It is defined in the file
                        Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
 
        ide=            [HW] (E)IDE subsystem
-                       Format: ide=nodma or ide=doubler or ide=reverse
+                       Format: ide=nodma or ide=doubler
                        See Documentation/ide/ide.txt.
 
        ide?=           [HW] (E)IDE subsystem
-                       Format: ide?=noprobe or chipset specific parameters.
+                       Format: ide?=ata66 or chipset specific parameters.
                        See Documentation/ide/ide.txt.
 
        idebus=         [HW] (E)IDE subsystem - VLB/PCI bus speed
@@ -811,6 +818,19 @@ and is between 256 and 4096 characters. It is defined in the file
 
        inttest=        [IA64]
 
+       iommu=          [x86]
+               off
+               force
+               noforce
+               biomerge
+               panic
+               nopanic
+               merge
+               nomerge
+               forcesac
+               soft
+
+
        intel_iommu=    [DMAR] Intel IOMMU driver (DMAR) option
                off
                        Disable intel iommu driver.
@@ -843,7 +863,7 @@ and is between 256 and 4096 characters. It is defined in the file
                        arch/alpha/kernel/core_marvel.c.
 
        ip=             [IP_PNP]
-                       See Documentation/nfsroot.txt.
+                       See Documentation/filesystems/nfsroot.txt.
 
        ip2=            [HW] Set IO/IRQ pairs for up to 4 IntelliPort boards
                        See comment before ip2_setup() in
@@ -927,6 +947,11 @@ and is between 256 and 4096 characters. It is defined in the file
        kstack=N        [X86-32,X86-64] Print N words from the kernel stack
                        in oops dumps.
 
+       kgdboc=         [HW] kgdb over consoles.
+                       Requires a tty driver that supports console polling.
+                       (only serial suported for now)
+                       Format: <serial_device>[,baud]
+
        l2cr=           [PPC]
 
        lapic           [X86-32,APIC] Enable the local APIC even if BIOS
@@ -1128,6 +1153,15 @@ and is between 256 and 4096 characters. It is defined in the file
        memmap=nn[KMG]$ss[KMG]
                        [KNL,ACPI] Mark specific memory as reserved.
                        Region of memory to be used, from ss to ss+nn.
+                       Example: Exclude memory from 0x18690000-0x1869ffff
+                                memmap=64K$0x18690000
+                                or
+                                memmap=0x10000$0x18690000
+
+       memtest=        [KNL,X86_64] Enable memtest
+                       Format: <integer>
+                       range: 0,4 : pattern number
+                       default : 0 <disable>
 
        meye.*=         [HW] Set MotionEye Camera parameters
                        See Documentation/video4linux/meye.txt.
@@ -1193,10 +1227,10 @@ and is between 256 and 4096 characters. It is defined in the file
                        file if at all.
 
        nfsaddrs=       [NFS]
-                       See Documentation/nfsroot.txt.
+                       See Documentation/filesystems/nfsroot.txt.
 
        nfsroot=        [NFS] nfs root filesystem for disk-less boxes.
-                       See Documentation/nfsroot.txt.
+                       See Documentation/filesystems/nfsroot.txt.
 
        nfs.callback_tcpport=
                        [NFS] set the TCP port on which the NFSv4 callback
@@ -1334,6 +1368,10 @@ and is between 256 and 4096 characters. It is defined in the file
 
        nowb            [ARM]
 
+       nptcg=          [IA64] Override max number of concurrent global TLB
+                       purges which is reported from either PAL_VM_SUMMARY or
+                       SAL PALO.
+
        numa_zonelist_order= [KNL, BOOT] Select zonelist order for NUMA.
                        one of ['zone', 'node', 'default'] can be specified
                        This can be set from sysctl after boot.
@@ -1423,10 +1461,6 @@ and is between 256 and 4096 characters. It is defined in the file
                nomsi           [MSI] If the PCI_MSI kernel config parameter is
                                enabled, this kernel boot option can be used to
                                disable the use of MSI interrupts system-wide.
-               nosort          [X86-32] Don't sort PCI devices according to
-                               order given by the PCI BIOS. This sorting is
-                               done to get a device order compatible with
-                               older kernels.
                biosirq         [X86-32] Use PCI BIOS calls to get the interrupt
                                routing table. These calls are known to be buggy
                                on several machines and they hang the machine