Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
[pandora-kernel.git] / Documentation / kernel-parameters.txt
index b12bacd..1808f11 100644 (file)
@@ -58,6 +58,7 @@ parameter is applicable:
        ISAPNP  ISA PnP code is enabled.
        ISDN    Appropriate ISDN support is enabled.
        JOY     Appropriate joystick support is enabled.
+       KGDB    Kernel debugger support is enabled.
        KVM     Kernel Virtual Machine support is enabled.
        LIBATA  Libata driver is enabled
        LP      Printer support is enabled.
@@ -144,11 +145,10 @@ and is between 256 and 4096 characters. It is defined in the file
 
        acpi=           [HW,ACPI,X86]
                        Advanced Configuration and Power Interface
-                       Format: { force | off | ht | strict | noirq | rsdt }
+                       Format: { force | off | strict | noirq | rsdt }
                        force -- enable ACPI if default was off
                        off -- disable ACPI if default was on
                        noirq -- do not use ACPI for IRQ routing
-                       ht -- run only enough ACPI to enable Hyper Threading
                        strict -- Be less tolerant of platforms that are not
                                strictly ACPI specification compliant.
                        rsdt -- prefer RSDT over (default) XSDT
@@ -289,9 +289,6 @@ and is between 256 and 4096 characters. It is defined in the file
        advansys=       [HW,SCSI]
                        See header of drivers/scsi/advansys.c.
 
-       advwdt=         [HW,WDT] Advantech WDT
-                       Format: <iostart>,<iostop>
-
        aedsp16=        [HW,OSS] Audio Excel DSP 16
                        Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq>
                        See also header of sound/oss/aedsp16.c.
@@ -712,6 +709,12 @@ and is between 256 and 4096 characters. It is defined in the file
                        The VGA output is eventually overwritten by the real
                        console.
 
+       ekgdboc=        [X86,KGDB] Allow early kernel console debugging
+                       ekgdboc=kbd
+
+                       This is desgined to be used in conjunction with
+                       the boot argument: earlyprintk=vga
+
        eata=           [HW,SCSI]
 
        edd=            [EDD]
@@ -754,13 +757,14 @@ and is between 256 and 4096 characters. It is defined in the file
                        Default value is 0.
                        Value can be changed at runtime via /selinux/enforce.
 
+       erst_disable    [ACPI]
+                       Disable Error Record Serialization Table (ERST)
+                       support.
+
        ether=          [HW,NET] Ethernet cards parameters
                        This option is obsoleted by the "netdev=" option, which
                        has equivalent usage. See its documentation for details.
 
-       eurwdt=         [HW,WDT] Eurotech CPU-1220/1410 onboard watchdog.
-                       Format: <io>[,<irq>]
-
        failslab=
        fail_page_alloc=
        fail_make_request=[KNL]
@@ -851,6 +855,11 @@ and is between 256 and 4096 characters. It is defined in the file
        hd=             [EIDE] (E)IDE hard drive subsystem geometry
                        Format: <cyl>,<head>,<sect>
 
+       hest_disable    [ACPI]
+                       Disable Hardware Error Source Table (HEST) support;
+                       corresponding firmware-first mode error processing
+                       logic will be disabled.
+
        highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact
                        size of <nn>. This works even on boxes that have no
                        highmem otherwise. This also works to reduce highmem
@@ -1120,10 +1129,26 @@ and is between 256 and 4096 characters. It is defined in the file
                        use the HighMem zone if it exists, and the Normal
                        zone if it does not.
 
-       kgdboc=         [HW] kgdb over consoles.
-                       Requires a tty driver that supports console polling.
-                       (only serial supported for now)
-                       Format: <serial_device>[,baud]
+       kgdbdbgp=       [KGDB,HW] kgdb over EHCI usb debug port.
+                       Format: <Controller#>[,poll interval]
+                       The controller # is the number of the ehci usb debug
+                       port as it is probed via PCI.  The poll interval is
+                       optional and is the number seconds in between
+                       each poll cycle to the debug port in case you need
+                       the functionality for interrupting the kernel with
+                       gdb or control-c on the dbgp connection.  When
+                       not using this parameter you use sysrq-g to break into
+                       the kernel debugger.
+
+       kgdboc=         [KGDB,HW] kgdb over consoles.
+                       Requires a tty driver that supports console polling,
+                       or a supported polling keyboard driver (non-usb).
+                       Serial only format: <serial_device>[,baud]
+                       keyboard only format: kbd
+                       keyboard and serial format: kbd,<serial_device>[,baud]
+
+       kgdbwait        [KGDB] Stop kernel execution and enter the
+                       kernel debugger at the earliest opportunity.
 
        kmac=           [MIPS] korina ethernet MAC address.
                        Configure the RouterBoard 532 series on-chip
@@ -1235,6 +1260,8 @@ and is between 256 and 4096 characters. It is defined in the file
                        * nohrst, nosrst, norst: suppress hard, soft
                           and both resets.
 
+                       * dump_id: dump IDENTIFY data.
+
                        If there are multiple matching configurations changing
                        the same attribute, the last one is used.
 
@@ -2244,9 +2271,6 @@ and is between 256 and 4096 characters. It is defined in the file
 
        sched_debug     [KNL] Enables verbose scheduler debug messages.
 
-       sc1200wdt=      [HW,WDT] SC1200 WDT (watchdog) driver
-                       Format: <io>[,<timeout>[,<isapnp>]]
-
        scsi_debug_*=   [SCSI]
                        See drivers/scsi/scsi_debug.c.
 
@@ -2835,8 +2859,10 @@ and is between 256 and 4096 characters. It is defined in the file
        wd7000=         [HW,SCSI]
                        See header of drivers/scsi/wd7000.c.
 
-       wdt=            [WDT] Watchdog
-                       See Documentation/watchdog/wdt.txt.
+       watchdog timers [HW,WDT] For information on watchdog timers,
+                       see Documentation/watchdog/watchdog-parameters.txt
+                       or other driver-specific files in the
+                       Documentation/watchdog/ directory.
 
        x2apic_phys     [X86-64,APIC] Use x2apic physical mode instead of
                        default x2apic cluster mode on platforms