You can do a very simple testing of running two dd threads in two different
cgroups. Here is what you can do.
+- Enable Block IO controller
+ CONFIG_BLK_CGROUP=y
+
- Enable group scheduling in CFQ
CONFIG_CFQ_GROUP_IOSCHED=y
Various user visible config options
===================================
-CONFIG_CFQ_GROUP_IOSCHED
- - Enables group scheduling in CFQ. Currently only 1 level of group
- creation is allowed.
-
-CONFIG_DEBUG_CFQ_IOSCHED
- - Enables some debugging messages in blktrace. Also creates extra
- cgroup file blkio.dequeue.
-
-Config options selected automatically
-=====================================
-These config options are not user visible and are selected/deselected
-automatically based on IO scheduler configuration.
-
CONFIG_BLK_CGROUP
- - Block IO controller. Selected by CONFIG_CFQ_GROUP_IOSCHED.
+ - Block IO controller.
CONFIG_DEBUG_BLK_CGROUP
- - Debug help. Selected by CONFIG_DEBUG_CFQ_IOSCHED.
+ - Debug help. Right now some additional stats file show up in cgroup
+ if this option is enabled.
+
+CONFIG_CFQ_GROUP_IOSCHED
+ - Enables group scheduling in CFQ. Currently only 1 level of group
+ creation is allowed.
Details of cgroup files
=======================
- blkio.weight
- - Specifies per cgroup weight.
-
+ - Specifies per cgroup weight. This is default weight of the group
+ on all the devices until and unless overridden by per device rule.
+ (See blkio.weight_device).
Currently allowed range of weights is from 100 to 1000.
+- blkio.weight_device
+ - One can specify per cgroup per device rules using this interface.
+ These rules override the default value of group weight as specified
+ by blkio.weight.
+
+ Following is the format.
+
+ #echo dev_maj:dev_minor weight > /path/to/cgroup/blkio.weight_device
+ Configure weight=300 on /dev/sdb (8:16) in this cgroup
+ # echo 8:16 300 > blkio.weight_device
+ # cat blkio.weight_device
+ dev weight
+ 8:16 300
+
+ Configure weight=500 on /dev/sda (8:0) in this cgroup
+ # echo 8:0 500 > blkio.weight_device
+ # cat blkio.weight_device
+ dev weight
+ 8:0 500
+ 8:16 300
+
+ Remove specific weight for /dev/sda in this cgroup
+ # echo 8:0 0 > blkio.weight_device
+ # cat blkio.weight_device
+ dev weight
+ 8:16 300
+
- blkio.time
- disk time allocated to cgroup per device in milliseconds. First
two fields specify the major and minor number of the device and
third field specifies the number of sectors transferred by the
group to/from the device.
+- blkio.io_service_bytes
+ - Number of bytes transferred to/from the disk by the group. These
+ are further divided by the type of operation - read or write, sync
+ or async. First two fields specify the major and minor number of the
+ device, third field specifies the operation type and the fourth field
+ specifies the number of bytes.
+
+- blkio.io_serviced
+ - Number of IOs completed to/from the disk by the group. These
+ are further divided by the type of operation - read or write, sync
+ or async. First two fields specify the major and minor number of the
+ device, third field specifies the operation type and the fourth field
+ specifies the number of IOs.
+
+- blkio.io_service_time
+ - Total amount of time between request dispatch and request completion
+ for the IOs done by this cgroup. This is in nanoseconds to make it
+ meaningful for flash devices too. For devices with queue depth of 1,
+ this time represents the actual service time. When queue_depth > 1,
+ that is no longer true as requests may be served out of order. This
+ may cause the service time for a given IO to include the service time
+ of multiple IOs when served out of order which may result in total
+ io_service_time > actual time elapsed. This time is further divided by
+ the type of operation - read or write, sync or async. First two fields
+ specify the major and minor number of the device, third field
+ specifies the operation type and the fourth field specifies the
+ io_service_time in ns.
+
+- blkio.io_wait_time
+ - Total amount of time the IOs for this cgroup spent waiting in the
+ scheduler queues for service. This can be greater than the total time
+ elapsed since it is cumulative io_wait_time for all IOs. It is not a
+ measure of total time the cgroup spent waiting but rather a measure of
+ the wait_time for its individual IOs. For devices with queue_depth > 1
+ this metric does not include the time spent waiting for service once
+ the IO is dispatched to the device but till it actually gets serviced
+ (there might be a time lag here due to re-ordering of requests by the
+ device). This is in nanoseconds to make it meaningful for flash
+ devices too. This time is further divided by the type of operation -
+ read or write, sync or async. First two fields specify the major and
+ minor number of the device, third field specifies the operation type
+ and the fourth field specifies the io_wait_time in ns.
+
+- blkio.io_merged
+ - Total number of bios/requests merged into requests belonging to this
+ cgroup. This is further divided by the type of operation - read or
+ write, sync or async.
+
+- blkio.io_queued
+ - Total number of requests queued up at any given instant for this
+ cgroup. This is further divided by the type of operation - read or
+ write, sync or async.
+
+- blkio.avg_queue_size
+ - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y.
+ The average queue size for this cgroup over the entire time of this
+ cgroup's existence. Queue size samples are taken each time one of the
+ queues of this cgroup gets a timeslice.
+
+- blkio.group_wait_time
+ - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y.
+ This is the amount of time the cgroup had to wait since it became busy
+ (i.e., went from 0 to 1 request queued) to get a timeslice for one of
+ its queues. This is different from the io_wait_time which is the
+ cumulative total of the amount of time spent by each IO in that cgroup
+ waiting in the scheduler queue. This is in nanoseconds. If this is
+ read when the cgroup is in a waiting (for timeslice) state, the stat
+ will only report the group_wait_time accumulated till the last time it
+ got a timeslice and will not include the current delta.
+
+- blkio.empty_time
+ - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y.
+ This is the amount of time a cgroup spends without any pending
+ requests when not being served, i.e., it does not include any time
+ spent idling for one of the queues of the cgroup. This is in
+ nanoseconds. If this is read when the cgroup is in an empty state,
+ the stat will only report the empty_time accumulated till the last
+ time it had a pending request and will not include the current delta.
+
+- blkio.idle_time
+ - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y.
+ This is the amount of time spent by the IO scheduler idling for a
+ given cgroup in anticipation of a better request than the exising ones
+ from other queues/cgroups. This is in nanoseconds. If this is read
+ when the cgroup is in an idling state, the stat will only report the
+ idle_time accumulated till the last idle period and will not include
+ the current delta.
+
- blkio.dequeue
- - Debugging aid only enabled if CONFIG_DEBUG_CFQ_IOSCHED=y. This
+ - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y. This
gives the statistics about how many a times a group was dequeued
from service tree of the device. First two fields specify the major
and minor number of the device and third field specifies the number
of times a group was dequeued from a particular device.
+- blkio.reset_stats
+ - Writing an int to this file will result in resetting all the stats
+ for that cgroup.
+
CFQ sysfs tunable
=================
/sys/block/<disk>/queue/iosched/group_isolation