sound/soc/codecs/wm8996.c

   1 /*
   2  * wm8996.c - WM8996 audio codec interface
   3  *
   4  * Copyright 2011-2 Wolfson Microelectronics PLC.
   5  * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
   6  *
   7  *  This program is free software; you can redistribute  it and/or modify it
   8  *  under  the terms of  the GNU General  Public License as published by the
   9  *  Free Software Foundation;  either version 2 of the  License, or (at your
  10  *  option) any later version.
  11  */
  12
  13 #include <linux/module.h>
  14 #include <linux/moduleparam.h>
  15 #include <linux/init.h>
  16 #include <linux/completion.h>
  17 #include <linux/delay.h>
  18 #include <linux/pm.h>
  19 #include <linux/gcd.h>
  20 #include <linux/gpio.h>
  21 #include <linux/i2c.h>
  22 #include <linux/regmap.h>
  23 #include <linux/regulator/consumer.h>
  24 #include <linux/slab.h>
  25 #include <linux/workqueue.h>
  26 #include <sound/core.h>
  27 #include <sound/jack.h>
  28 #include <sound/pcm.h>
  29 #include <sound/pcm_params.h>
  30 #include <sound/soc.h>
  31 #include <sound/initval.h>
  32 #include <sound/tlv.h>
  33 #include <trace/events/asoc.h>
  34
  35 #include <sound/wm8996.h>
  36 #include "wm8996.h"
  37
  38 #define WM8996_AIFS 2
  39
  40 #define HPOUT1L 1
  41 #define HPOUT1R 2
  42 #define HPOUT2L 4
  43 #define HPOUT2R 8
  44
  45 #define WM8996_NUM_SUPPLIES 3
  46 static const char *wm8996_supply_names[WM8996_NUM_SUPPLIES] = {
  47         "DBVDD",
  48         "AVDD1",
  49         "AVDD2",
  50 };
  51
  52 struct wm8996_priv {
  53         struct device *dev;
  54         struct regmap *regmap;
  55         struct snd_soc_codec *codec;
  56
  57         int ldo1ena;
  58
  59         int sysclk;
  60         int sysclk_src;
  61
  62         int fll_src;
  63         int fll_fref;
  64         int fll_fout;
  65
  66         struct completion fll_lock;
  67
  68         u16 dcs_pending;
  69         struct completion dcs_done;
  70
  71         u16 hpout_ena;
  72         u16 hpout_pending;
  73
  74         struct regulator_bulk_data supplies[WM8996_NUM_SUPPLIES];
  75         struct notifier_block disable_nb[WM8996_NUM_SUPPLIES];
  76         int bg_ena;
  77
  78         struct wm8996_pdata pdata;
  79
  80         int rx_rate[WM8996_AIFS];
  81         int bclk_rate[WM8996_AIFS];
  82
  83         /* Platform dependant ReTune mobile configuration */
  84         int num_retune_mobile_texts;
  85         const char **retune_mobile_texts;
  86         int retune_mobile_cfg[2];
  87         struct soc_enum retune_mobile_enum;
  88
  89         struct snd_soc_jack *jack;
  90         bool detecting;
  91         bool jack_mic;
  92         int jack_flips;
  93         wm8996_polarity_fn polarity_cb;
  94
  95 #ifdef CONFIG_GPIOLIB
  96         struct gpio_chip gpio_chip;
  97 #endif
  98 };
  99
 100 /* We can't use the same notifier block for more than one supply and
 101  * there's no way I can see to get from a callback to the caller
 102  * except container_of().
 103  */
 104 #define WM8996_REGULATOR_EVENT(n) \
 105 static int wm8996_regulator_event_##n(struct notifier_block *nb, \
 106                                     unsigned long event, void *data)    \
 107 { \
 108         struct wm8996_priv *wm8996 = container_of(nb, struct wm8996_priv, \
 109                                                   disable_nb[n]); \
 110         if (event & REGULATOR_EVENT_DISABLE) { \
 111                 regcache_mark_dirty(wm8996->regmap);    \
 112         } \
 113         return 0; \
 114 }
 115
 116 WM8996_REGULATOR_EVENT(0)
 117 WM8996_REGULATOR_EVENT(1)
 118 WM8996_REGULATOR_EVENT(2)
 119
 120 static struct reg_default wm8996_reg[] = {
 121         { WM8996_POWER_MANAGEMENT_1, 0x0 },
 122         { WM8996_POWER_MANAGEMENT_2, 0x0 },
 123         { WM8996_POWER_MANAGEMENT_3, 0x0 },
 124         { WM8996_POWER_MANAGEMENT_4, 0x0 },
 125         { WM8996_POWER_MANAGEMENT_5, 0x0 },
 126         { WM8996_POWER_MANAGEMENT_6, 0x0 },
 127         { WM8996_POWER_MANAGEMENT_7, 0x10 },
 128         { WM8996_POWER_MANAGEMENT_8, 0x0 },
 129         { WM8996_LEFT_LINE_INPUT_VOLUME, 0x0 },
 130         { WM8996_RIGHT_LINE_INPUT_VOLUME, 0x0 },
 131         { WM8996_LINE_INPUT_CONTROL, 0x0 },
 132         { WM8996_DAC1_HPOUT1_VOLUME, 0x88 },
 133         { WM8996_DAC2_HPOUT2_VOLUME, 0x88 },
 134         { WM8996_DAC1_LEFT_VOLUME, 0x2c0 },
 135         { WM8996_DAC1_RIGHT_VOLUME, 0x2c0 },
 136         { WM8996_DAC2_LEFT_VOLUME, 0x2c0 },
 137         { WM8996_DAC2_RIGHT_VOLUME, 0x2c0 },
 138         { WM8996_OUTPUT1_LEFT_VOLUME, 0x80 },
 139         { WM8996_OUTPUT1_RIGHT_VOLUME, 0x80 },
 140         { WM8996_OUTPUT2_LEFT_VOLUME, 0x80 },
 141         { WM8996_OUTPUT2_RIGHT_VOLUME, 0x80 },
 142         { WM8996_MICBIAS_1, 0x39 },
 143         { WM8996_MICBIAS_2, 0x39 },
 144         { WM8996_LDO_1, 0x3 },
 145         { WM8996_LDO_2, 0x13 },
 146         { WM8996_ACCESSORY_DETECT_MODE_1, 0x4 },
 147         { WM8996_ACCESSORY_DETECT_MODE_2, 0x0 },
 148         { WM8996_HEADPHONE_DETECT_1, 0x20 },
 149         { WM8996_HEADPHONE_DETECT_2, 0x0 },
 150         { WM8996_MIC_DETECT_1, 0x7600 },
 151         { WM8996_MIC_DETECT_2, 0xbf },
 152         { WM8996_CHARGE_PUMP_1, 0x1f25 },
 153         { WM8996_CHARGE_PUMP_2, 0xab19 },
 154         { WM8996_DC_SERVO_1, 0x0 },
 155         { WM8996_DC_SERVO_3, 0x0 },
 156         { WM8996_DC_SERVO_5, 0x2a2a },
 157         { WM8996_DC_SERVO_6, 0x0 },
 158         { WM8996_DC_SERVO_7, 0x0 },
 159         { WM8996_ANALOGUE_HP_1, 0x0 },
 160         { WM8996_ANALOGUE_HP_2, 0x0 },
 161         { WM8996_CONTROL_INTERFACE_1, 0x8004 },
 162         { WM8996_WRITE_SEQUENCER_CTRL_1, 0x0 },
 163         { WM8996_WRITE_SEQUENCER_CTRL_2, 0x0 },
 164         { WM8996_AIF_CLOCKING_1, 0x0 },
 165         { WM8996_AIF_CLOCKING_2, 0x0 },
 166         { WM8996_CLOCKING_1, 0x10 },
 167         { WM8996_CLOCKING_2, 0x0 },
 168         { WM8996_AIF_RATE, 0x83 },
 169         { WM8996_FLL_CONTROL_1, 0x0 },
 170         { WM8996_FLL_CONTROL_2, 0x0 },
 171         { WM8996_FLL_CONTROL_3, 0x0 },
 172         { WM8996_FLL_CONTROL_4, 0x5dc0 },
 173         { WM8996_FLL_CONTROL_5, 0xc84 },
 174         { WM8996_FLL_EFS_1, 0x0 },
 175         { WM8996_FLL_EFS_2, 0x2 },
 176         { WM8996_AIF1_CONTROL, 0x0 },
 177         { WM8996_AIF1_BCLK, 0x0 },
 178         { WM8996_AIF1_TX_LRCLK_1, 0x80 },
 179         { WM8996_AIF1_TX_LRCLK_2, 0x8 },
 180         { WM8996_AIF1_RX_LRCLK_1, 0x80 },
 181         { WM8996_AIF1_RX_LRCLK_2, 0x0 },
 182         { WM8996_AIF1TX_DATA_CONFIGURATION_1, 0x1818 },
 183         { WM8996_AIF1TX_DATA_CONFIGURATION_2, 0 },
 184         { WM8996_AIF1RX_DATA_CONFIGURATION, 0x1818 },
 185         { WM8996_AIF1TX_CHANNEL_0_CONFIGURATION, 0x0 },
 186         { WM8996_AIF1TX_CHANNEL_1_CONFIGURATION, 0x0 },
 187         { WM8996_AIF1TX_CHANNEL_2_CONFIGURATION, 0x0 },
 188         { WM8996_AIF1TX_CHANNEL_3_CONFIGURATION, 0x0 },
 189         { WM8996_AIF1TX_CHANNEL_4_CONFIGURATION, 0x0 },
 190         { WM8996_AIF1TX_CHANNEL_5_CONFIGURATION, 0x0 },
 191         { WM8996_AIF1RX_CHANNEL_0_CONFIGURATION, 0x0 },
 192         { WM8996_AIF1RX_CHANNEL_1_CONFIGURATION, 0x0 },
 193         { WM8996_AIF1RX_CHANNEL_2_CONFIGURATION, 0x0 },
 194         { WM8996_AIF1RX_CHANNEL_3_CONFIGURATION, 0x0 },
 195         { WM8996_AIF1RX_CHANNEL_4_CONFIGURATION, 0x0 },
 196         { WM8996_AIF1RX_CHANNEL_5_CONFIGURATION, 0x0 },
 197         { WM8996_AIF1RX_MONO_CONFIGURATION, 0x0 },
 198         { WM8996_AIF1TX_TEST, 0x7 },
 199         { WM8996_AIF2_CONTROL, 0x0 },
 200         { WM8996_AIF2_BCLK, 0x0 },
 201         { WM8996_AIF2_TX_LRCLK_1, 0x80 },
 202         { WM8996_AIF2_TX_LRCLK_2, 0x8 },
 203         { WM8996_AIF2_RX_LRCLK_1, 0x80 },
 204         { WM8996_AIF2_RX_LRCLK_2, 0x0 },
 205         { WM8996_AIF2TX_DATA_CONFIGURATION_1, 0x1818 },
 206         { WM8996_AIF2RX_DATA_CONFIGURATION, 0x1818 },
 207         { WM8996_AIF2RX_DATA_CONFIGURATION, 0x0 },
 208         { WM8996_AIF2TX_CHANNEL_0_CONFIGURATION, 0x0 },
 209         { WM8996_AIF2TX_CHANNEL_1_CONFIGURATION, 0x0 },
 210         { WM8996_AIF2RX_CHANNEL_0_CONFIGURATION, 0x0 },
 211         { WM8996_AIF2RX_CHANNEL_1_CONFIGURATION, 0x0 },
 212         { WM8996_AIF2RX_MONO_CONFIGURATION, 0x0 },
 213         { WM8996_AIF2TX_TEST, 0x1 },
 214         { WM8996_DSP1_TX_LEFT_VOLUME, 0xc0 },
 215         { WM8996_DSP1_TX_RIGHT_VOLUME, 0xc0 },
 216         { WM8996_DSP1_RX_LEFT_VOLUME, 0xc0 },
 217         { WM8996_DSP1_RX_RIGHT_VOLUME, 0xc0 },
 218         { WM8996_DSP1_TX_FILTERS, 0x2000 },
 219         { WM8996_DSP1_RX_FILTERS_1, 0x200 },
 220         { WM8996_DSP1_RX_FILTERS_2, 0x10 },
 221         { WM8996_DSP1_DRC_1, 0x98 },
 222         { WM8996_DSP1_DRC_2, 0x845 },
 223         { WM8996_DSP1_RX_EQ_GAINS_1, 0x6318 },
 224         { WM8996_DSP1_RX_EQ_GAINS_2, 0x6300 },
 225         { WM8996_DSP1_RX_EQ_BAND_1_A, 0xfca },
 226         { WM8996_DSP1_RX_EQ_BAND_1_B, 0x400 },
 227         { WM8996_DSP1_RX_EQ_BAND_1_PG, 0xd8 },
 228         { WM8996_DSP1_RX_EQ_BAND_2_A, 0x1eb5 },
 229         { WM8996_DSP1_RX_EQ_BAND_2_B, 0xf145 },
 230         { WM8996_DSP1_RX_EQ_BAND_2_C, 0xb75 },
 231         { WM8996_DSP1_RX_EQ_BAND_2_PG, 0x1c5 },
 232         { WM8996_DSP1_RX_EQ_BAND_3_A, 0x1c58 },
 233         { WM8996_DSP1_RX_EQ_BAND_3_B, 0xf373 },
 234         { WM8996_DSP1_RX_EQ_BAND_3_C, 0xa54 },
 235         { WM8996_DSP1_RX_EQ_BAND_3_PG, 0x558 },
 236         { WM8996_DSP1_RX_EQ_BAND_4_A, 0x168e },
 237         { WM8996_DSP1_RX_EQ_BAND_4_B, 0xf829 },
 238         { WM8996_DSP1_RX_EQ_BAND_4_C, 0x7ad },
 239         { WM8996_DSP1_RX_EQ_BAND_4_PG, 0x1103 },
 240         { WM8996_DSP1_RX_EQ_BAND_5_A, 0x564 },
 241         { WM8996_DSP1_RX_EQ_BAND_5_B, 0x559 },
 242         { WM8996_DSP1_RX_EQ_BAND_5_PG, 0x4000 },
 243         { WM8996_DSP2_TX_LEFT_VOLUME, 0xc0 },
 244         { WM8996_DSP2_TX_RIGHT_VOLUME, 0xc0 },
 245         { WM8996_DSP2_RX_LEFT_VOLUME, 0xc0 },
 246         { WM8996_DSP2_RX_RIGHT_VOLUME, 0xc0 },
 247         { WM8996_DSP2_TX_FILTERS, 0x2000 },
 248         { WM8996_DSP2_RX_FILTERS_1, 0x200 },
 249         { WM8996_DSP2_RX_FILTERS_2, 0x10 },
 250         { WM8996_DSP2_DRC_1, 0x98 },
 251         { WM8996_DSP2_DRC_2, 0x845 },
 252         { WM8996_DSP2_RX_EQ_GAINS_1, 0x6318 },
 253         { WM8996_DSP2_RX_EQ_GAINS_2, 0x6300 },
 254         { WM8996_DSP2_RX_EQ_BAND_1_A, 0xfca },
 255         { WM8996_DSP2_RX_EQ_BAND_1_B, 0x400 },
 256         { WM8996_DSP2_RX_EQ_BAND_1_PG, 0xd8 },
 257         { WM8996_DSP2_RX_EQ_BAND_2_A, 0x1eb5 },
 258         { WM8996_DSP2_RX_EQ_BAND_2_B, 0xf145 },
 259         { WM8996_DSP2_RX_EQ_BAND_2_C, 0xb75 },
 260         { WM8996_DSP2_RX_EQ_BAND_2_PG, 0x1c5 },
 261         { WM8996_DSP2_RX_EQ_BAND_3_A, 0x1c58 },
 262         { WM8996_DSP2_RX_EQ_BAND_3_B, 0xf373 },
 263         { WM8996_DSP2_RX_EQ_BAND_3_C, 0xa54 },
 264         { WM8996_DSP2_RX_EQ_BAND_3_PG, 0x558 },
 265         { WM8996_DSP2_RX_EQ_BAND_4_A, 0x168e },
 266         { WM8996_DSP2_RX_EQ_BAND_4_B, 0xf829 },
 267         { WM8996_DSP2_RX_EQ_BAND_4_C, 0x7ad },
 268         { WM8996_DSP2_RX_EQ_BAND_4_PG, 0x1103 },
 269         { WM8996_DSP2_RX_EQ_BAND_5_A, 0x564 },
 270         { WM8996_DSP2_RX_EQ_BAND_5_B, 0x559 },
 271         { WM8996_DSP2_RX_EQ_BAND_5_PG, 0x4000 },
 272         { WM8996_DAC1_MIXER_VOLUMES, 0x0 },
 273         { WM8996_DAC1_LEFT_MIXER_ROUTING, 0x0 },
 274         { WM8996_DAC1_RIGHT_MIXER_ROUTING, 0x0 },
 275         { WM8996_DAC2_MIXER_VOLUMES, 0x0 },
 276         { WM8996_DAC2_LEFT_MIXER_ROUTING, 0x0 },
 277         { WM8996_DAC2_RIGHT_MIXER_ROUTING, 0x0 },
 278         { WM8996_DSP1_TX_LEFT_MIXER_ROUTING, 0x0 },
 279         { WM8996_DSP1_TX_RIGHT_MIXER_ROUTING, 0x0 },
 280         { WM8996_DSP2_TX_LEFT_MIXER_ROUTING, 0x0 },
 281         { WM8996_DSP2_TX_RIGHT_MIXER_ROUTING, 0x0 },
 282         { WM8996_DSP_TX_MIXER_SELECT, 0x0 },
 283         { WM8996_DAC_SOFTMUTE, 0x0 },
 284         { WM8996_OVERSAMPLING, 0xd },
 285         { WM8996_SIDETONE, 0x1040 },
 286         { WM8996_GPIO_1, 0xa101 },
 287         { WM8996_GPIO_2, 0xa101 },
 288         { WM8996_GPIO_3, 0xa101 },
 289         { WM8996_GPIO_4, 0xa101 },
 290         { WM8996_GPIO_5, 0xa101 },
 291         { WM8996_PULL_CONTROL_1, 0x0 },
 292         { WM8996_PULL_CONTROL_2, 0x140 },
 293         { WM8996_INTERRUPT_STATUS_1_MASK, 0x1f },
 294         { WM8996_INTERRUPT_STATUS_2_MASK, 0x1ecf },
 295         { WM8996_LEFT_PDM_SPEAKER, 0x0 },
 296         { WM8996_RIGHT_PDM_SPEAKER, 0x1 },
 297         { WM8996_PDM_SPEAKER_MUTE_SEQUENCE, 0x69 },
 298         { WM8996_PDM_SPEAKER_VOLUME, 0x66 },
 299 };
 300
 301 static const DECLARE_TLV_DB_SCALE(inpga_tlv, 0, 100, 0);
 302 static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 150, 0);
 303 static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
 304 static const DECLARE_TLV_DB_SCALE(out_digital_tlv, -1200, 150, 0);
 305 static const DECLARE_TLV_DB_SCALE(out_tlv, -900, 75, 0);
 306 static const DECLARE_TLV_DB_SCALE(spk_tlv, -900, 150, 0);
 307 static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
 308 static const DECLARE_TLV_DB_SCALE(threedstereo_tlv, -1600, 183, 1);
 309
 310 static const char *sidetone_hpf_text[] = {
 311         "2.9kHz", "1.5kHz", "735Hz", "403Hz", "196Hz", "98Hz", "49Hz"
 312 };
 313
 314 static const struct soc_enum sidetone_hpf =
 315         SOC_ENUM_SINGLE(WM8996_SIDETONE, 7, 7, sidetone_hpf_text);
 316
 317 static const char *hpf_mode_text[] = {
 318         "HiFi", "Custom", "Voice"
 319 };
 320
 321 static const struct soc_enum dsp1tx_hpf_mode =
 322         SOC_ENUM_SINGLE(WM8996_DSP1_TX_FILTERS, 3, 3, hpf_mode_text);
 323
 324 static const struct soc_enum dsp2tx_hpf_mode =
 325         SOC_ENUM_SINGLE(WM8996_DSP2_TX_FILTERS, 3, 3, hpf_mode_text);
 326
 327 static const char *hpf_cutoff_text[] = {
 328         "50Hz", "75Hz", "100Hz", "150Hz", "200Hz", "300Hz", "400Hz"
 329 };
 330
 331 static const struct soc_enum dsp1tx_hpf_cutoff =
 332         SOC_ENUM_SINGLE(WM8996_DSP1_TX_FILTERS, 0, 7, hpf_cutoff_text);
 333
 334 static const struct soc_enum dsp2tx_hpf_cutoff =
 335         SOC_ENUM_SINGLE(WM8996_DSP2_TX_FILTERS, 0, 7, hpf_cutoff_text);
 336
 337 static void wm8996_set_retune_mobile(struct snd_soc_codec *codec, int block)
 338 {
 339         struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
 340         struct wm8996_pdata *pdata = &wm8996->pdata;
 341         int base, best, best_val, save, i, cfg, iface;
 342
 343         if (!wm8996->num_retune_mobile_texts)
 344                 return;
 345
 346         switch (block) {
 347         case 0:
 348                 base = WM8996_DSP1_RX_EQ_GAINS_1;
 349                 if (snd_soc_read(codec, WM8996_POWER_MANAGEMENT_8) &
 350                     WM8996_DSP1RX_SRC)
 351                         iface = 1;
 352                 else
 353                         iface = 0;
 354                 break;
 355         case 1:
 356                 base = WM8996_DSP1_RX_EQ_GAINS_2;
 357                 if (snd_soc_read(codec, WM8996_POWER_MANAGEMENT_8) &
 358                     WM8996_DSP2RX_SRC)
 359                         iface = 1;
 360                 else
 361                         iface = 0;
 362                 break;
 363         default:
 364                 return;
 365         }
 366
 367         /* Find the version of the currently selected configuration
 368          * with the nearest sample rate. */
 369         cfg = wm8996->retune_mobile_cfg[block];
 370         best = 0;
 371         best_val = INT_MAX;
 372         for (i = 0; i < pdata->num_retune_mobile_cfgs; i++) {
 373                 if (strcmp(pdata->retune_mobile_cfgs[i].name,
 374                            wm8996->retune_mobile_texts[cfg]) == 0 &&
 375                     abs(pdata->retune_mobile_cfgs[i].rate
 376                         - wm8996->rx_rate[iface]) < best_val) {
 377                         best = i;
 378                         best_val = abs(pdata->retune_mobile_cfgs[i].rate
 379                                        - wm8996->rx_rate[iface]);
 380                 }
 381         }
 382
 383         dev_dbg(codec->dev, "ReTune Mobile %d %s/%dHz for %dHz sample rate\n",
 384                 block,
 385                 pdata->retune_mobile_cfgs[best].name,
 386                 pdata->retune_mobile_cfgs[best].rate,
 387                 wm8996->rx_rate[iface]);
 388
 389         /* The EQ will be disabled while reconfiguring it, remember the
 390          * current configuration.
 391          */
 392         save = snd_soc_read(codec, base);
 393         save &= WM8996_DSP1RX_EQ_ENA;
 394
 395         for (i = 0; i < ARRAY_SIZE(pdata->retune_mobile_cfgs[best].regs); i++)
 396                 snd_soc_update_bits(codec, base + i, 0xffff,
 397                                     pdata->retune_mobile_cfgs[best].regs[i]);
 398
 399         snd_soc_update_bits(codec, base, WM8996_DSP1RX_EQ_ENA, save);
 400 }
 401
 402 /* Icky as hell but saves code duplication */
 403 static int wm8996_get_retune_mobile_block(const char *name)
 404 {
 405         if (strcmp(name, "DSP1 EQ Mode") == 0)
 406                 return 0;
 407         if (strcmp(name, "DSP2 EQ Mode") == 0)
 408                 return 1;
 409         return -EINVAL;
 410 }
 411
 412 static int wm8996_put_retune_mobile_enum(struct snd_kcontrol *kcontrol,
 413                                          struct snd_ctl_elem_value *ucontrol)
 414 {
 415         struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 416         struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
 417         struct wm8996_pdata *pdata = &wm8996->pdata;
 418         int block = wm8996_get_retune_mobile_block(kcontrol->id.name);
 419         int value = ucontrol->value.integer.value[0];
 420
 421         if (block < 0)
 422                 return block;
 423
 424         if (value >= pdata->num_retune_mobile_cfgs)
 425                 return -EINVAL;
 426
 427         wm8996->retune_mobile_cfg[block] = value;
 428
 429         wm8996_set_retune_mobile(codec, block);
 430
 431         return 0;
 432 }
 433
 434 static int wm8996_get_retune_mobile_enum(struct snd_kcontrol *kcontrol,
 435                                          struct snd_ctl_elem_value *ucontrol)
 436 {
 437         struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 438         struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
 439         int block = wm8996_get_retune_mobile_block(kcontrol->id.name);
 440
 441         ucontrol->value.enumerated.item[0] = wm8996->retune_mobile_cfg[block];
 442
 443         return 0;
 444 }
 445
 446 static const struct snd_kcontrol_new wm8996_snd_controls[] = {
 447 SOC_DOUBLE_R_TLV("Capture Volume", WM8996_LEFT_LINE_INPUT_VOLUME,
 448                  WM8996_RIGHT_LINE_INPUT_VOLUME, 0, 31, 0, inpga_tlv),
 449 SOC_DOUBLE_R("Capture ZC Switch", WM8996_LEFT_LINE_INPUT_VOLUME,
 450              WM8996_RIGHT_LINE_INPUT_VOLUME, 5, 1, 0),
 451
 452 SOC_DOUBLE_TLV("DAC1 Sidetone Volume", WM8996_DAC1_MIXER_VOLUMES,
 453                0, 5, 24, 0, sidetone_tlv),
 454 SOC_DOUBLE_TLV("DAC2 Sidetone Volume", WM8996_DAC2_MIXER_VOLUMES,
 455                0, 5, 24, 0, sidetone_tlv),
 456 SOC_SINGLE("Sidetone LPF Switch", WM8996_SIDETONE, 12, 1, 0),
 457 SOC_ENUM("Sidetone HPF Cut-off", sidetone_hpf),
 458 SOC_SINGLE("Sidetone HPF Switch", WM8996_SIDETONE, 6, 1, 0),
 459
 460 SOC_DOUBLE_R_TLV("DSP1 Capture Volume", WM8996_DSP1_TX_LEFT_VOLUME,
 461                  WM8996_DSP1_TX_RIGHT_VOLUME, 1, 96, 0, digital_tlv),
 462 SOC_DOUBLE_R_TLV("DSP2 Capture Volume", WM8996_DSP2_TX_LEFT_VOLUME,
 463                  WM8996_DSP2_TX_RIGHT_VOLUME, 1, 96, 0, digital_tlv),
 464
 465 SOC_SINGLE("DSP1 Capture Notch Filter Switch", WM8996_DSP1_TX_FILTERS,
 466            13, 1, 0),
 467 SOC_DOUBLE("DSP1 Capture HPF Switch", WM8996_DSP1_TX_FILTERS, 12, 11, 1, 0),
 468 SOC_ENUM("DSP1 Capture HPF Mode", dsp1tx_hpf_mode),
 469 SOC_ENUM("DSP1 Capture HPF Cutoff", dsp1tx_hpf_cutoff),
 470
 471 SOC_SINGLE("DSP2 Capture Notch Filter Switch", WM8996_DSP2_TX_FILTERS,
 472            13, 1, 0),
 473 SOC_DOUBLE("DSP2 Capture HPF Switch", WM8996_DSP2_TX_FILTERS, 12, 11, 1, 0),
 474 SOC_ENUM("DSP2 Capture HPF Mode", dsp2tx_hpf_mode),
 475 SOC_ENUM("DSP2 Capture HPF Cutoff", dsp2tx_hpf_cutoff),
 476
 477 SOC_DOUBLE_R_TLV("DSP1 Playback Volume", WM8996_DSP1_RX_LEFT_VOLUME,
 478                  WM8996_DSP1_RX_RIGHT_VOLUME, 1, 112, 0, digital_tlv),
 479 SOC_SINGLE("DSP1 Playback Switch", WM8996_DSP1_RX_FILTERS_1, 9, 1, 1),
 480
 481 SOC_DOUBLE_R_TLV("DSP2 Playback Volume", WM8996_DSP2_RX_LEFT_VOLUME,
 482                  WM8996_DSP2_RX_RIGHT_VOLUME, 1, 112, 0, digital_tlv),
 483 SOC_SINGLE("DSP2 Playback Switch", WM8996_DSP2_RX_FILTERS_1, 9, 1, 1),
 484
 485 SOC_DOUBLE_R_TLV("DAC1 Volume", WM8996_DAC1_LEFT_VOLUME,
 486                  WM8996_DAC1_RIGHT_VOLUME, 1, 112, 0, digital_tlv),
 487 SOC_DOUBLE_R("DAC1 Switch", WM8996_DAC1_LEFT_VOLUME,
 488              WM8996_DAC1_RIGHT_VOLUME, 9, 1, 1),
 489
 490 SOC_DOUBLE_R_TLV("DAC2 Volume", WM8996_DAC2_LEFT_VOLUME,
 491                  WM8996_DAC2_RIGHT_VOLUME, 1, 112, 0, digital_tlv),
 492 SOC_DOUBLE_R("DAC2 Switch", WM8996_DAC2_LEFT_VOLUME,
 493              WM8996_DAC2_RIGHT_VOLUME, 9, 1, 1),
 494
 495 SOC_SINGLE("Speaker High Performance Switch", WM8996_OVERSAMPLING, 3, 1, 0),
 496 SOC_SINGLE("DMIC High Performance Switch", WM8996_OVERSAMPLING, 2, 1, 0),
 497 SOC_SINGLE("ADC High Performance Switch", WM8996_OVERSAMPLING, 1, 1, 0),
 498 SOC_SINGLE("DAC High Performance Switch", WM8996_OVERSAMPLING, 0, 1, 0),
 499
 500 SOC_SINGLE("DAC Soft Mute Switch", WM8996_DAC_SOFTMUTE, 1, 1, 0),
 501 SOC_SINGLE("DAC Slow Soft Mute Switch", WM8996_DAC_SOFTMUTE, 0, 1, 0),
 502
 503 SOC_SINGLE("DSP1 3D Stereo Switch", WM8996_DSP1_RX_FILTERS_2, 8, 1, 0),
 504 SOC_SINGLE("DSP2 3D Stereo Switch", WM8996_DSP2_RX_FILTERS_2, 8, 1, 0),
 505
 506 SOC_SINGLE_TLV("DSP1 3D Stereo Volume", WM8996_DSP1_RX_FILTERS_2, 10, 15,
 507                 0, threedstereo_tlv),
 508 SOC_SINGLE_TLV("DSP2 3D Stereo Volume", WM8996_DSP2_RX_FILTERS_2, 10, 15,
 509                 0, threedstereo_tlv),
 510
 511 SOC_DOUBLE_TLV("Digital Output 1 Volume", WM8996_DAC1_HPOUT1_VOLUME, 0, 4,
 512                8, 0, out_digital_tlv),
 513 SOC_DOUBLE_TLV("Digital Output 2 Volume", WM8996_DAC2_HPOUT2_VOLUME, 0, 4,
 514                8, 0, out_digital_tlv),
 515
 516 SOC_DOUBLE_R_TLV("Output 1 Volume", WM8996_OUTPUT1_LEFT_VOLUME,
 517                  WM8996_OUTPUT1_RIGHT_VOLUME, 0, 12, 0, out_tlv),
 518 SOC_DOUBLE_R("Output 1 ZC Switch",  WM8996_OUTPUT1_LEFT_VOLUME,
 519              WM8996_OUTPUT1_RIGHT_VOLUME, 7, 1, 0),
 520
 521 SOC_DOUBLE_R_TLV("Output 2 Volume", WM8996_OUTPUT2_LEFT_VOLUME,
 522                  WM8996_OUTPUT2_RIGHT_VOLUME, 0, 12, 0, out_tlv),
 523 SOC_DOUBLE_R("Output 2 ZC Switch",  WM8996_OUTPUT2_LEFT_VOLUME,
 524              WM8996_OUTPUT2_RIGHT_VOLUME, 7, 1, 0),
 525
 526 SOC_DOUBLE_TLV("Speaker Volume", WM8996_PDM_SPEAKER_VOLUME, 0, 4, 8, 0,
 527                spk_tlv),
 528 SOC_DOUBLE_R("Speaker Switch", WM8996_LEFT_PDM_SPEAKER,
 529              WM8996_RIGHT_PDM_SPEAKER, 3, 1, 1),
 530 SOC_DOUBLE_R("Speaker ZC Switch", WM8996_LEFT_PDM_SPEAKER,
 531              WM8996_RIGHT_PDM_SPEAKER, 2, 1, 0),
 532
 533 SOC_SINGLE("DSP1 EQ Switch", WM8996_DSP1_RX_EQ_GAINS_1, 0, 1, 0),
 534 SOC_SINGLE("DSP2 EQ Switch", WM8996_DSP2_RX_EQ_GAINS_1, 0, 1, 0),
 535
 536 SOC_SINGLE("DSP1 DRC TXL Switch", WM8996_DSP1_DRC_1, 0, 1, 0),
 537 SOC_SINGLE("DSP1 DRC TXR Switch", WM8996_DSP1_DRC_1, 1, 1, 0),
 538 SOC_SINGLE("DSP1 DRC RX Switch", WM8996_DSP1_DRC_1, 2, 1, 0),
 539 SND_SOC_BYTES_MASK("DSP1 DRC", WM8996_DSP1_DRC_1, 5,
 540                    WM8996_DSP1RX_DRC_ENA | WM8996_DSP1TXL_DRC_ENA |
 541                    WM8996_DSP1TXR_DRC_ENA),
 542
 543 SOC_SINGLE("DSP2 DRC TXL Switch", WM8996_DSP2_DRC_1, 0, 1, 0),
 544 SOC_SINGLE("DSP2 DRC TXR Switch", WM8996_DSP2_DRC_1, 1, 1, 0),
 545 SOC_SINGLE("DSP2 DRC RX Switch", WM8996_DSP2_DRC_1, 2, 1, 0),
 546 SND_SOC_BYTES_MASK("DSP2 DRC", WM8996_DSP2_DRC_1, 5,
 547                    WM8996_DSP2RX_DRC_ENA | WM8996_DSP2TXL_DRC_ENA |
 548                    WM8996_DSP2TXR_DRC_ENA),
 549 };
 550
 551 static const struct snd_kcontrol_new wm8996_eq_controls[] = {
 552 SOC_SINGLE_TLV("DSP1 EQ B1 Volume", WM8996_DSP1_RX_EQ_GAINS_1, 11, 31, 0,
 553                eq_tlv),
 554 SOC_SINGLE_TLV("DSP1 EQ B2 Volume", WM8996_DSP1_RX_EQ_GAINS_1, 6, 31, 0,
 555                eq_tlv),
 556 SOC_SINGLE_TLV("DSP1 EQ B3 Volume", WM8996_DSP1_RX_EQ_GAINS_1, 1, 31, 0,
 557                eq_tlv),
 558 SOC_SINGLE_TLV("DSP1 EQ B4 Volume", WM8996_DSP1_RX_EQ_GAINS_2, 11, 31, 0,
 559                eq_tlv),
 560 SOC_SINGLE_TLV("DSP1 EQ B5 Volume", WM8996_DSP1_RX_EQ_GAINS_2, 6, 31, 0,
 561                eq_tlv),
 562
 563 SOC_SINGLE_TLV("DSP2 EQ B1 Volume", WM8996_DSP2_RX_EQ_GAINS_1, 11, 31, 0,
 564                eq_tlv),
 565 SOC_SINGLE_TLV("DSP2 EQ B2 Volume", WM8996_DSP2_RX_EQ_GAINS_1, 6, 31, 0,
 566                eq_tlv),
 567 SOC_SINGLE_TLV("DSP2 EQ B3 Volume", WM8996_DSP2_RX_EQ_GAINS_1, 1, 31, 0,
 568                eq_tlv),
 569 SOC_SINGLE_TLV("DSP2 EQ B4 Volume", WM8996_DSP2_RX_EQ_GAINS_2, 11, 31, 0,
 570                eq_tlv),
 571 SOC_SINGLE_TLV("DSP2 EQ B5 Volume", WM8996_DSP2_RX_EQ_GAINS_2, 6, 31, 0,
 572                eq_tlv),
 573 };
 574
 575 static void wm8996_bg_enable(struct snd_soc_codec *codec)
 576 {
 577         struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
 578
 579         wm8996->bg_ena++;
 580         if (wm8996->bg_ena == 1) {
 581                 snd_soc_update_bits(codec, WM8996_POWER_MANAGEMENT_1,
 582                                     WM8996_BG_ENA, WM8996_BG_ENA);
 583                 msleep(2);
 584         }
 585 }
 586
 587 static void wm8996_bg_disable(struct snd_soc_codec *codec)
 588 {
 589         struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
 590
 591         wm8996->bg_ena--;
 592         if (!wm8996->bg_ena)
 593                 snd_soc_update_bits(codec, WM8996_POWER_MANAGEMENT_1,
 594                                     WM8996_BG_ENA, 0);
 595 }
 596
 597 static int bg_event(struct snd_soc_dapm_widget *w,
 598                     struct snd_kcontrol *kcontrol, int event)
 599 {
 600         struct snd_soc_codec *codec = w->codec;
 601         int ret = 0;
 602
 603         switch (event) {
 604         case SND_SOC_DAPM_PRE_PMU:
 605                 wm8996_bg_enable(codec);
 606                 break;
 607         case SND_SOC_DAPM_POST_PMD:
 608                 wm8996_bg_disable(codec);
 609                 break;
 610         default:
 611                 WARN(1, "Invalid event %d\n", event);
 612                 ret = -EINVAL;
 613         }
 614
 615         return ret;
 616 }
 617
 618 static int cp_event(struct snd_soc_dapm_widget *w,
 619                     struct snd_kcontrol *kcontrol, int event)
 620 {
 621         int ret = 0;
 622
 623         switch (event) {
 624         case SND_SOC_DAPM_POST_PMU:
 625                 msleep(5);
 626                 break;
 627         default:
 628                 WARN(1, "Invalid event %d\n", event);
 629                 ret = -EINVAL;
 630         }
 631
 632         return 0;
 633 }
 634
 635 static int rmv_short_event(struct snd_soc_dapm_widget *w,
 636                            struct snd_kcontrol *kcontrol, int event)
 637 {
 638         struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(w->codec);
 639
 640         /* Record which outputs we enabled */
 641         switch (event) {
 642         case SND_SOC_DAPM_PRE_PMD:
 643                 wm8996->hpout_pending &= ~w->shift;
 644                 break;
 645         case SND_SOC_DAPM_PRE_PMU:
 646                 wm8996->hpout_pending |= w->shift;
 647                 break;
 648         default:
 649                 WARN(1, "Invalid event %d\n", event);
 650                 return -EINVAL;
 651         }
 652
 653         return 0;
 654 }
 655
 656 static void wait_for_dc_servo(struct snd_soc_codec *codec, u16 mask)
 657 {
 658         struct i2c_client *i2c = to_i2c_client(codec->dev);
 659         struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
 660         int ret;
 661         unsigned long timeout = 200;
 662
 663         snd_soc_write(codec, WM8996_DC_SERVO_2, mask);
 664
 665         /* Use the interrupt if possible */
 666         do {
 667                 if (i2c->irq) {
 668                         timeout = wait_for_completion_timeout(&wm8996->dcs_done,
 669                                                               msecs_to_jiffies(200));
 670                         if (timeout == 0)
 671                                 dev_err(codec->dev, "DC servo timed out\n");
 672
 673                 } else {
 674                         msleep(1);
 675                         timeout--;
 676                 }
 677
 678                 ret = snd_soc_read(codec, WM8996_DC_SERVO_2);
 679                 dev_dbg(codec->dev, "DC servo state: %x\n", ret);
 680         } while (timeout && ret & mask);
 681
 682         if (timeout == 0)
 683                 dev_err(codec->dev, "DC servo timed out for %x\n", mask);
 684         else
 685                 dev_dbg(codec->dev, "DC servo complete for %x\n", mask);
 686 }
 687
 688 static void wm8996_seq_notifier(struct snd_soc_dapm_context *dapm,
 689                                 enum snd_soc_dapm_type event, int subseq)
 690 {
 691         struct snd_soc_codec *codec = container_of(dapm,
 692                                                    struct snd_soc_codec, dapm);
 693         struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
 694         u16 val, mask;
 695
 696         /* Complete any pending DC servo starts */
 697         if (wm8996->dcs_pending) {
 698                 dev_dbg(codec->dev, "Starting DC servo for %x\n",
 699                         wm8996->dcs_pending);
 700
 701                 /* Trigger a startup sequence */
 702                 wait_for_dc_servo(codec, wm8996->dcs_pending
 703                                          << WM8996_DCS_TRIG_STARTUP_0_SHIFT);
 704
 705                 wm8996->dcs_pending = 0;
 706         }
 707
 708         if (wm8996->hpout_pending != wm8996->hpout_ena) {
 709                 dev_dbg(codec->dev, "Applying RMV_SHORTs %x->%x\n",
 710                         wm8996->hpout_ena, wm8996->hpout_pending);
 711
 712                 val = 0;
 713                 mask = 0;
 714                 if (wm8996->hpout_pending & HPOUT1L) {
 715                         val |= WM8996_HPOUT1L_RMV_SHORT | WM8996_HPOUT1L_OUTP;
 716                         mask |= WM8996_HPOUT1L_RMV_SHORT | WM8996_HPOUT1L_OUTP;
 717                 } else {
 718                         mask |= WM8996_HPOUT1L_RMV_SHORT |
 719                                 WM8996_HPOUT1L_OUTP |
 720                                 WM8996_HPOUT1L_DLY;
 721                 }
 722
 723                 if (wm8996->hpout_pending & HPOUT1R) {
 724                         val |= WM8996_HPOUT1R_RMV_SHORT | WM8996_HPOUT1R_OUTP;
 725                         mask |= WM8996_HPOUT1R_RMV_SHORT | WM8996_HPOUT1R_OUTP;
 726                 } else {
 727                         mask |= WM8996_HPOUT1R_RMV_SHORT |
 728                                 WM8996_HPOUT1R_OUTP |
 729                                 WM8996_HPOUT1R_DLY;
 730                 }
 731
 732                 snd_soc_update_bits(codec, WM8996_ANALOGUE_HP_1, mask, val);
 733
 734                 val = 0;
 735                 mask = 0;
 736                 if (wm8996->hpout_pending & HPOUT2L) {
 737                         val |= WM8996_HPOUT2L_RMV_SHORT | WM8996_HPOUT2L_OUTP;
 738                         mask |= WM8996_HPOUT2L_RMV_SHORT | WM8996_HPOUT2L_OUTP;
 739                 } else {
 740                         mask |= WM8996_HPOUT2L_RMV_SHORT |
 741                                 WM8996_HPOUT2L_OUTP |
 742                                 WM8996_HPOUT2L_DLY;
 743                 }
 744
 745                 if (wm8996->hpout_pending & HPOUT2R) {
 746                         val |= WM8996_HPOUT2R_RMV_SHORT | WM8996_HPOUT2R_OUTP;
 747                         mask |= WM8996_HPOUT2R_RMV_SHORT | WM8996_HPOUT2R_OUTP;
 748                 } else {
 749                         mask |= WM8996_HPOUT2R_RMV_SHORT |
 750                                 WM8996_HPOUT2R_OUTP |
 751                                 WM8996_HPOUT2R_DLY;
 752                 }
 753
 754                 snd_soc_update_bits(codec, WM8996_ANALOGUE_HP_2, mask, val);
 755
 756                 wm8996->hpout_ena = wm8996->hpout_pending;
 757         }
 758 }
 759
 760 static int dcs_start(struct snd_soc_dapm_widget *w,
 761                      struct snd_kcontrol *kcontrol, int event)
 762 {
 763         struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(w->codec);
 764
 765         switch (event) {
 766         case SND_SOC_DAPM_POST_PMU:
 767                 wm8996->dcs_pending |= 1 << w->shift;
 768                 break;
 769         default:
 770                 WARN(1, "Invalid event %d\n", event);
 771                 return -EINVAL;
 772         }
 773
 774         return 0;
 775 }
 776
 777 static const char *sidetone_text[] = {
 778         "IN1", "IN2",
 779 };
 780
 781 static const struct soc_enum left_sidetone_enum =
 782         SOC_ENUM_SINGLE(WM8996_SIDETONE, 0, 2, sidetone_text);
 783
 784 static const struct snd_kcontrol_new left_sidetone =
 785         SOC_DAPM_ENUM("Left Sidetone", left_sidetone_enum);
 786
 787 static const struct soc_enum right_sidetone_enum =
 788         SOC_ENUM_SINGLE(WM8996_SIDETONE, 1, 2, sidetone_text);
 789
 790 static const struct snd_kcontrol_new right_sidetone =
 791         SOC_DAPM_ENUM("Right Sidetone", right_sidetone_enum);
 792
 793 static const char *spk_text[] = {
 794         "DAC1L", "DAC1R", "DAC2L", "DAC2R"
 795 };
 796
 797 static const struct soc_enum spkl_enum =
 798         SOC_ENUM_SINGLE(WM8996_LEFT_PDM_SPEAKER, 0, 4, spk_text);
 799
 800 static const struct snd_kcontrol_new spkl_mux =
 801         SOC_DAPM_ENUM("SPKL", spkl_enum);
 802
 803 static const struct soc_enum spkr_enum =
 804         SOC_ENUM_SINGLE(WM8996_RIGHT_PDM_SPEAKER, 0, 4, spk_text);
 805
 806 static const struct snd_kcontrol_new spkr_mux =
 807         SOC_DAPM_ENUM("SPKR", spkr_enum);
 808
 809 static const char *dsp1rx_text[] = {
 810         "AIF1", "AIF2"
 811 };
 812
 813 static const struct soc_enum dsp1rx_enum =
 814         SOC_ENUM_SINGLE(WM8996_POWER_MANAGEMENT_8, 0, 2, dsp1rx_text);
 815
 816 static const struct snd_kcontrol_new dsp1rx =
 817         SOC_DAPM_ENUM("DSP1RX", dsp1rx_enum);
 818
 819 static const char *dsp2rx_text[] = {
 820          "AIF2", "AIF1"
 821 };
 822
 823 static const struct soc_enum dsp2rx_enum =
 824         SOC_ENUM_SINGLE(WM8996_POWER_MANAGEMENT_8, 4, 2, dsp2rx_text);
 825
 826 static const struct snd_kcontrol_new dsp2rx =
 827         SOC_DAPM_ENUM("DSP2RX", dsp2rx_enum);
 828
 829 static const char *aif2tx_text[] = {
 830         "DSP2", "DSP1", "AIF1"
 831 };
 832
 833 static const struct soc_enum aif2tx_enum =
 834         SOC_ENUM_SINGLE(WM8996_POWER_MANAGEMENT_8, 6, 3, aif2tx_text);
 835
 836 static const struct snd_kcontrol_new aif2tx =
 837         SOC_DAPM_ENUM("AIF2TX", aif2tx_enum);
 838
 839 static const char *inmux_text[] = {
 840         "ADC", "DMIC1", "DMIC2"
 841 };
 842
 843 static const struct soc_enum in1_enum =
 844         SOC_ENUM_SINGLE(WM8996_POWER_MANAGEMENT_7, 0, 3, inmux_text);
 845
 846 static const struct snd_kcontrol_new in1_mux =
 847         SOC_DAPM_ENUM("IN1 Mux", in1_enum);
 848
 849 static const struct soc_enum in2_enum =
 850         SOC_ENUM_SINGLE(WM8996_POWER_MANAGEMENT_7, 4, 3, inmux_text);
 851
 852 static const struct snd_kcontrol_new in2_mux =
 853         SOC_DAPM_ENUM("IN2 Mux", in2_enum);
 854
 855 static const struct snd_kcontrol_new dac2r_mix[] = {
 856 SOC_DAPM_SINGLE("Right Sidetone Switch", WM8996_DAC2_RIGHT_MIXER_ROUTING,
 857                 5, 1, 0),
 858 SOC_DAPM_SINGLE("Left Sidetone Switch", WM8996_DAC2_RIGHT_MIXER_ROUTING,
 859                 4, 1, 0),
 860 SOC_DAPM_SINGLE("DSP2 Switch", WM8996_DAC2_RIGHT_MIXER_ROUTING, 1, 1, 0),
 861 SOC_DAPM_SINGLE("DSP1 Switch", WM8996_DAC2_RIGHT_MIXER_ROUTING, 0, 1, 0),
 862 };
 863
 864 static const struct snd_kcontrol_new dac2l_mix[] = {
 865 SOC_DAPM_SINGLE("Right Sidetone Switch", WM8996_DAC2_LEFT_MIXER_ROUTING,
 866                 5, 1, 0),
 867 SOC_DAPM_SINGLE("Left Sidetone Switch", WM8996_DAC2_LEFT_MIXER_ROUTING,
 868                 4, 1, 0),
 869 SOC_DAPM_SINGLE("DSP2 Switch", WM8996_DAC2_LEFT_MIXER_ROUTING, 1, 1, 0),
 870 SOC_DAPM_SINGLE("DSP1 Switch", WM8996_DAC2_LEFT_MIXER_ROUTING, 0, 1, 0),
 871 };
 872
 873 static const struct snd_kcontrol_new dac1r_mix[] = {
 874 SOC_DAPM_SINGLE("Right Sidetone Switch", WM8996_DAC1_RIGHT_MIXER_ROUTING,
 875                 5, 1, 0),
 876 SOC_DAPM_SINGLE("Left Sidetone Switch", WM8996_DAC1_RIGHT_MIXER_ROUTING,
 877                 4, 1, 0),
 878 SOC_DAPM_SINGLE("DSP2 Switch", WM8996_DAC1_RIGHT_MIXER_ROUTING, 1, 1, 0),
 879 SOC_DAPM_SINGLE("DSP1 Switch", WM8996_DAC1_RIGHT_MIXER_ROUTING, 0, 1, 0),
 880 };
 881
 882 static const struct snd_kcontrol_new dac1l_mix[] = {
 883 SOC_DAPM_SINGLE("Right Sidetone Switch", WM8996_DAC1_LEFT_MIXER_ROUTING,
 884                 5, 1, 0),
 885 SOC_DAPM_SINGLE("Left Sidetone Switch", WM8996_DAC1_LEFT_MIXER_ROUTING,
 886                 4, 1, 0),
 887 SOC_DAPM_SINGLE("DSP2 Switch", WM8996_DAC1_LEFT_MIXER_ROUTING, 1, 1, 0),
 888 SOC_DAPM_SINGLE("DSP1 Switch", WM8996_DAC1_LEFT_MIXER_ROUTING, 0, 1, 0),
 889 };
 890
 891 static const struct snd_kcontrol_new dsp1txl[] = {
 892 SOC_DAPM_SINGLE("IN1 Switch", WM8996_DSP1_TX_LEFT_MIXER_ROUTING,
 893                 1, 1, 0),
 894 SOC_DAPM_SINGLE("DAC Switch", WM8996_DSP1_TX_LEFT_MIXER_ROUTING,
 895                 0, 1, 0),
 896 };
 897
 898 static const struct snd_kcontrol_new dsp1txr[] = {
 899 SOC_DAPM_SINGLE("IN1 Switch", WM8996_DSP1_TX_RIGHT_MIXER_ROUTING,
 900                 1, 1, 0),
 901 SOC_DAPM_SINGLE("DAC Switch", WM8996_DSP1_TX_RIGHT_MIXER_ROUTING,
 902                 0, 1, 0),
 903 };
 904
 905 static const struct snd_kcontrol_new dsp2txl[] = {
 906 SOC_DAPM_SINGLE("IN1 Switch", WM8996_DSP2_TX_LEFT_MIXER_ROUTING,
 907                 1, 1, 0),
 908 SOC_DAPM_SINGLE("DAC Switch", WM8996_DSP2_TX_LEFT_MIXER_ROUTING,
 909                 0, 1, 0),
 910 };
 911
 912 static const struct snd_kcontrol_new dsp2txr[] = {
 913 SOC_DAPM_SINGLE("IN1 Switch", WM8996_DSP2_TX_RIGHT_MIXER_ROUTING,
 914                 1, 1, 0),
 915 SOC_DAPM_SINGLE("DAC Switch", WM8996_DSP2_TX_RIGHT_MIXER_ROUTING,
 916                 0, 1, 0),
 917 };
 918
 919
 920 static const struct snd_soc_dapm_widget wm8996_dapm_widgets[] = {
 921 SND_SOC_DAPM_INPUT("IN1LN"),
 922 SND_SOC_DAPM_INPUT("IN1LP"),
 923 SND_SOC_DAPM_INPUT("IN1RN"),
 924 SND_SOC_DAPM_INPUT("IN1RP"),
 925
 926 SND_SOC_DAPM_INPUT("IN2LN"),
 927 SND_SOC_DAPM_INPUT("IN2LP"),
 928 SND_SOC_DAPM_INPUT("IN2RN"),
 929 SND_SOC_DAPM_INPUT("IN2RP"),
 930
 931 SND_SOC_DAPM_INPUT("DMIC1DAT"),
 932 SND_SOC_DAPM_INPUT("DMIC2DAT"),
 933
 934 SND_SOC_DAPM_REGULATOR_SUPPLY("CPVDD", 20, 0),
 935 SND_SOC_DAPM_SUPPLY_S("SYSCLK", 1, WM8996_AIF_CLOCKING_1, 0, 0, NULL, 0),
 936 SND_SOC_DAPM_SUPPLY_S("SYSDSPCLK", 2, WM8996_CLOCKING_1, 1, 0, NULL, 0),
 937 SND_SOC_DAPM_SUPPLY_S("AIFCLK", 2, WM8996_CLOCKING_1, 2, 0, NULL, 0),
 938 SND_SOC_DAPM_SUPPLY_S("Charge Pump", 2, WM8996_CHARGE_PUMP_1, 15, 0, cp_event,
 939                       SND_SOC_DAPM_POST_PMU),
 940 SND_SOC_DAPM_SUPPLY("Bandgap", SND_SOC_NOPM, 0, 0, bg_event,
 941                     SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
 942 SND_SOC_DAPM_SUPPLY("LDO2", WM8996_POWER_MANAGEMENT_2, 1, 0, NULL, 0),
 943 SND_SOC_DAPM_SUPPLY("MICB1 Audio", WM8996_MICBIAS_1, 4, 1, NULL, 0),
 944 SND_SOC_DAPM_SUPPLY("MICB2 Audio", WM8996_MICBIAS_2, 4, 1, NULL, 0),
 945 SND_SOC_DAPM_MICBIAS("MICB2", WM8996_POWER_MANAGEMENT_1, 9, 0),
 946 SND_SOC_DAPM_MICBIAS("MICB1", WM8996_POWER_MANAGEMENT_1, 8, 0),
 947
 948 SND_SOC_DAPM_PGA("IN1L PGA", WM8996_POWER_MANAGEMENT_2, 5, 0, NULL, 0),
 949 SND_SOC_DAPM_PGA("IN1R PGA", WM8996_POWER_MANAGEMENT_2, 4, 0, NULL, 0),
 950
 951 SND_SOC_DAPM_MUX("IN1L Mux", WM8996_POWER_MANAGEMENT_7, 2, 0, &in1_mux),
 952 SND_SOC_DAPM_MUX("IN1R Mux", WM8996_POWER_MANAGEMENT_7, 3, 0, &in1_mux),
 953 SND_SOC_DAPM_MUX("IN2L Mux", WM8996_POWER_MANAGEMENT_7, 6, 0, &in2_mux),
 954 SND_SOC_DAPM_MUX("IN2R Mux", WM8996_POWER_MANAGEMENT_7, 7, 0, &in2_mux),
 955
 956 SND_SOC_DAPM_SUPPLY("DMIC2", WM8996_POWER_MANAGEMENT_7, 9, 0, NULL, 0),
 957 SND_SOC_DAPM_SUPPLY("DMIC1", WM8996_POWER_MANAGEMENT_7, 8, 0, NULL, 0),
 958
 959 SND_SOC_DAPM_ADC("DMIC2L", NULL, WM8996_POWER_MANAGEMENT_3, 5, 0),
 960 SND_SOC_DAPM_ADC("DMIC2R", NULL, WM8996_POWER_MANAGEMENT_3, 4, 0),
 961 SND_SOC_DAPM_ADC("DMIC1L", NULL, WM8996_POWER_MANAGEMENT_3, 3, 0),
 962 SND_SOC_DAPM_ADC("DMIC1R", NULL, WM8996_POWER_MANAGEMENT_3, 2, 0),
 963
 964 SND_SOC_DAPM_ADC("ADCL", NULL, WM8996_POWER_MANAGEMENT_3, 1, 0),
 965 SND_SOC_DAPM_ADC("ADCR", NULL, WM8996_POWER_MANAGEMENT_3, 0, 0),
 966
 967 SND_SOC_DAPM_MUX("Left Sidetone", SND_SOC_NOPM, 0, 0, &left_sidetone),
 968 SND_SOC_DAPM_MUX("Right Sidetone", SND_SOC_NOPM, 0, 0, &right_sidetone),
 969
 970 SND_SOC_DAPM_AIF_IN("DSP2RXL", NULL, 0, WM8996_POWER_MANAGEMENT_3, 11, 0),
 971 SND_SOC_DAPM_AIF_IN("DSP2RXR", NULL, 1, WM8996_POWER_MANAGEMENT_3, 10, 0),
 972 SND_SOC_DAPM_AIF_IN("DSP1RXL", NULL, 0, WM8996_POWER_MANAGEMENT_3, 9, 0),
 973 SND_SOC_DAPM_AIF_IN("DSP1RXR", NULL, 1, WM8996_POWER_MANAGEMENT_3, 8, 0),
 974
 975 SND_SOC_DAPM_MIXER("DSP2TXL", WM8996_POWER_MANAGEMENT_5, 11, 0,
 976                    dsp2txl, ARRAY_SIZE(dsp2txl)),
 977 SND_SOC_DAPM_MIXER("DSP2TXR", WM8996_POWER_MANAGEMENT_5, 10, 0,
 978                    dsp2txr, ARRAY_SIZE(dsp2txr)),
 979 SND_SOC_DAPM_MIXER("DSP1TXL", WM8996_POWER_MANAGEMENT_5, 9, 0,
 980                    dsp1txl, ARRAY_SIZE(dsp1txl)),
 981 SND_SOC_DAPM_MIXER("DSP1TXR", WM8996_POWER_MANAGEMENT_5, 8, 0,
 982                    dsp1txr, ARRAY_SIZE(dsp1txr)),
 983
 984 SND_SOC_DAPM_MIXER("DAC2L Mixer", SND_SOC_NOPM, 0, 0,
 985                    dac2l_mix, ARRAY_SIZE(dac2l_mix)),
 986 SND_SOC_DAPM_MIXER("DAC2R Mixer", SND_SOC_NOPM, 0, 0,
 987                    dac2r_mix, ARRAY_SIZE(dac2r_mix)),
 988 SND_SOC_DAPM_MIXER("DAC1L Mixer", SND_SOC_NOPM, 0, 0,
 989                    dac1l_mix, ARRAY_SIZE(dac1l_mix)),
 990 SND_SOC_DAPM_MIXER("DAC1R Mixer", SND_SOC_NOPM, 0, 0,
 991                    dac1r_mix, ARRAY_SIZE(dac1r_mix)),
 992
 993 SND_SOC_DAPM_DAC("DAC2L", NULL, WM8996_POWER_MANAGEMENT_5, 3, 0),
 994 SND_SOC_DAPM_DAC("DAC2R", NULL, WM8996_POWER_MANAGEMENT_5, 2, 0),
 995 SND_SOC_DAPM_DAC("DAC1L", NULL, WM8996_POWER_MANAGEMENT_5, 1, 0),
 996 SND_SOC_DAPM_DAC("DAC1R", NULL, WM8996_POWER_MANAGEMENT_5, 0, 0),
 997
 998 SND_SOC_DAPM_AIF_IN("AIF2RX1", NULL, 0, WM8996_POWER_MANAGEMENT_4, 9, 0),
 999 SND_SOC_DAPM_AIF_IN("AIF2RX0", NULL, 1, WM8996_POWER_MANAGEMENT_4, 8, 0),
1000
1001 SND_SOC_DAPM_AIF_OUT("AIF2TX1", NULL, 0, WM8996_POWER_MANAGEMENT_6, 9, 0),
1002 SND_SOC_DAPM_AIF_OUT("AIF2TX0", NULL, 1, WM8996_POWER_MANAGEMENT_6, 8, 0),
1003
1004 SND_SOC_DAPM_AIF_IN("AIF1RX5", NULL, 5, WM8996_POWER_MANAGEMENT_4, 5, 0),
1005 SND_SOC_DAPM_AIF_IN("AIF1RX4", NULL, 4, WM8996_POWER_MANAGEMENT_4, 4, 0),
1006 SND_SOC_DAPM_AIF_IN("AIF1RX3", NULL, 3, WM8996_POWER_MANAGEMENT_4, 3, 0),
1007 SND_SOC_DAPM_AIF_IN("AIF1RX2", NULL, 2, WM8996_POWER_MANAGEMENT_4, 2, 0),
1008 SND_SOC_DAPM_AIF_IN("AIF1RX1", NULL, 1, WM8996_POWER_MANAGEMENT_4, 1, 0),
1009 SND_SOC_DAPM_AIF_IN("AIF1RX0", NULL, 0, WM8996_POWER_MANAGEMENT_4, 0, 0),
1010
1011 SND_SOC_DAPM_AIF_OUT("AIF1TX5", NULL, 5, WM8996_POWER_MANAGEMENT_6, 5, 0),
1012 SND_SOC_DAPM_AIF_OUT("AIF1TX4", NULL, 4, WM8996_POWER_MANAGEMENT_6, 4, 0),
1013 SND_SOC_DAPM_AIF_OUT("AIF1TX3", NULL, 3, WM8996_POWER_MANAGEMENT_6, 3, 0),
1014 SND_SOC_DAPM_AIF_OUT("AIF1TX2", NULL, 2, WM8996_POWER_MANAGEMENT_6, 2, 0),
1015 SND_SOC_DAPM_AIF_OUT("AIF1TX1", NULL, 1, WM8996_POWER_MANAGEMENT_6, 1, 0),
1016 SND_SOC_DAPM_AIF_OUT("AIF1TX0", NULL, 0, WM8996_POWER_MANAGEMENT_6, 0, 0),
1017
1018 /* We route as stereo pairs so define some dummy widgets to squash
1019  * things down for now.  RXA = 0,1, RXB = 2,3 and so on */
1020 SND_SOC_DAPM_PGA("AIF1RXA", SND_SOC_NOPM, 0, 0, NULL, 0),
1021 SND_SOC_DAPM_PGA("AIF1RXB", SND_SOC_NOPM, 0, 0, NULL, 0),
1022 SND_SOC_DAPM_PGA("AIF1RXC", SND_SOC_NOPM, 0, 0, NULL, 0),
1023 SND_SOC_DAPM_PGA("AIF2RX", SND_SOC_NOPM, 0, 0, NULL, 0),
1024 SND_SOC_DAPM_PGA("DSP2TX", SND_SOC_NOPM, 0, 0, NULL, 0),
1025
1026 SND_SOC_DAPM_MUX("DSP1RX", SND_SOC_NOPM, 0, 0, &dsp1rx),
1027 SND_SOC_DAPM_MUX("DSP2RX", SND_SOC_NOPM, 0, 0, &dsp2rx),
1028 SND_SOC_DAPM_MUX("AIF2TX", SND_SOC_NOPM, 0, 0, &aif2tx),
1029
1030 SND_SOC_DAPM_MUX("SPKL", SND_SOC_NOPM, 0, 0, &spkl_mux),
1031 SND_SOC_DAPM_MUX("SPKR", SND_SOC_NOPM, 0, 0, &spkr_mux),
1032 SND_SOC_DAPM_PGA("SPKL PGA", WM8996_LEFT_PDM_SPEAKER, 4, 0, NULL, 0),
1033 SND_SOC_DAPM_PGA("SPKR PGA", WM8996_RIGHT_PDM_SPEAKER, 4, 0, NULL, 0),
1034
1035 SND_SOC_DAPM_PGA_S("HPOUT2L PGA", 0, WM8996_POWER_MANAGEMENT_1, 7, 0, NULL, 0),
1036 SND_SOC_DAPM_PGA_S("HPOUT2L_DLY", 1, WM8996_ANALOGUE_HP_2, 5, 0, NULL, 0),
1037 SND_SOC_DAPM_PGA_S("HPOUT2L_DCS", 2, WM8996_DC_SERVO_1, 2, 0, dcs_start,
1038                    SND_SOC_DAPM_POST_PMU),
1039 SND_SOC_DAPM_PGA_S("HPOUT2L_RMV_SHORT", 3, SND_SOC_NOPM, HPOUT2L, 0,
1040                    rmv_short_event,
1041                    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
1042
1043 SND_SOC_DAPM_PGA_S("HPOUT2R PGA", 0, WM8996_POWER_MANAGEMENT_1, 6, 0,NULL, 0),
1044 SND_SOC_DAPM_PGA_S("HPOUT2R_DLY", 1, WM8996_ANALOGUE_HP_2, 1, 0, NULL, 0),
1045 SND_SOC_DAPM_PGA_S("HPOUT2R_DCS", 2, WM8996_DC_SERVO_1, 3, 0, dcs_start,
1046                    SND_SOC_DAPM_POST_PMU),
1047 SND_SOC_DAPM_PGA_S("HPOUT2R_RMV_SHORT", 3, SND_SOC_NOPM, HPOUT2R, 0,
1048                    rmv_short_event,
1049                    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
1050
1051 SND_SOC_DAPM_PGA_S("HPOUT1L PGA", 0, WM8996_POWER_MANAGEMENT_1, 5, 0, NULL, 0),
1052 SND_SOC_DAPM_PGA_S("HPOUT1L_DLY", 1, WM8996_ANALOGUE_HP_1, 5, 0, NULL, 0),
1053 SND_SOC_DAPM_PGA_S("HPOUT1L_DCS", 2, WM8996_DC_SERVO_1, 0, 0, dcs_start,
1054                    SND_SOC_DAPM_POST_PMU),
1055 SND_SOC_DAPM_PGA_S("HPOUT1L_RMV_SHORT", 3, SND_SOC_NOPM, HPOUT1L, 0,
1056                    rmv_short_event,
1057                    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
1058
1059 SND_SOC_DAPM_PGA_S("HPOUT1R PGA", 0, WM8996_POWER_MANAGEMENT_1, 4, 0, NULL, 0),
1060 SND_SOC_DAPM_PGA_S("HPOUT1R_DLY", 1, WM8996_ANALOGUE_HP_1, 1, 0, NULL, 0),
1061 SND_SOC_DAPM_PGA_S("HPOUT1R_DCS", 2, WM8996_DC_SERVO_1, 1, 0, dcs_start,
1062                    SND_SOC_DAPM_POST_PMU),
1063 SND_SOC_DAPM_PGA_S("HPOUT1R_RMV_SHORT", 3, SND_SOC_NOPM, HPOUT1R, 0,
1064                    rmv_short_event,
1065                    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
1066
1067 SND_SOC_DAPM_OUTPUT("HPOUT1L"),
1068 SND_SOC_DAPM_OUTPUT("HPOUT1R"),
1069 SND_SOC_DAPM_OUTPUT("HPOUT2L"),
1070 SND_SOC_DAPM_OUTPUT("HPOUT2R"),
1071 SND_SOC_DAPM_OUTPUT("SPKDAT"),
1072 };
1073
1074 static const struct snd_soc_dapm_route wm8996_dapm_routes[] = {
1075         { "AIFCLK", NULL, "SYSCLK" },
1076         { "SYSDSPCLK", NULL, "SYSCLK" },
1077         { "Charge Pump", NULL, "SYSCLK" },
1078         { "Charge Pump", NULL, "CPVDD" },
1079
1080         { "MICB1", NULL, "LDO2" },
1081         { "MICB1", NULL, "MICB1 Audio" },
1082         { "MICB1", NULL, "Bandgap" },
1083         { "MICB2", NULL, "LDO2" },
1084         { "MICB2", NULL, "MICB2 Audio" },
1085         { "MICB2", NULL, "Bandgap" },
1086
1087         { "AIF1RX0", NULL, "AIF1 Playback" },
1088         { "AIF1RX1", NULL, "AIF1 Playback" },
1089         { "AIF1RX2", NULL, "AIF1 Playback" },
1090         { "AIF1RX3", NULL, "AIF1 Playback" },
1091         { "AIF1RX4", NULL, "AIF1 Playback" },
1092         { "AIF1RX5", NULL, "AIF1 Playback" },
1093
1094         { "AIF2RX0", NULL, "AIF2 Playback" },
1095         { "AIF2RX1", NULL, "AIF2 Playback" },
1096
1097         { "AIF1 Capture", NULL, "AIF1TX0" },
1098         { "AIF1 Capture", NULL, "AIF1TX1" },
1099         { "AIF1 Capture", NULL, "AIF1TX2" },
1100         { "AIF1 Capture", NULL, "AIF1TX3" },
1101         { "AIF1 Capture", NULL, "AIF1TX4" },
1102         { "AIF1 Capture", NULL, "AIF1TX5" },
1103
1104         { "AIF2 Capture", NULL, "AIF2TX0" },
1105         { "AIF2 Capture", NULL, "AIF2TX1" },
1106
1107         { "IN1L PGA", NULL, "IN2LN" },
1108         { "IN1L PGA", NULL, "IN2LP" },
1109         { "IN1L PGA", NULL, "IN1LN" },
1110         { "IN1L PGA", NULL, "IN1LP" },
1111         { "IN1L PGA", NULL, "Bandgap" },
1112
1113         { "IN1R PGA", NULL, "IN2RN" },
1114         { "IN1R PGA", NULL, "IN2RP" },
1115         { "IN1R PGA", NULL, "IN1RN" },
1116         { "IN1R PGA", NULL, "IN1RP" },
1117         { "IN1R PGA", NULL, "Bandgap" },
1118
1119         { "ADCL", NULL, "IN1L PGA" },
1120
1121         { "ADCR", NULL, "IN1R PGA" },
1122
1123         { "DMIC1L", NULL, "DMIC1DAT" },
1124         { "DMIC1R", NULL, "DMIC1DAT" },
1125         { "DMIC2L", NULL, "DMIC2DAT" },
1126         { "DMIC2R", NULL, "DMIC2DAT" },
1127
1128         { "DMIC2L", NULL, "DMIC2" },
1129         { "DMIC2R", NULL, "DMIC2" },
1130         { "DMIC1L", NULL, "DMIC1" },
1131         { "DMIC1R", NULL, "DMIC1" },
1132
1133         { "IN1L Mux", "ADC", "ADCL" },
1134         { "IN1L Mux", "DMIC1", "DMIC1L" },
1135         { "IN1L Mux", "DMIC2", "DMIC2L" },
1136
1137         { "IN1R Mux", "ADC", "ADCR" },
1138         { "IN1R Mux", "DMIC1", "DMIC1R" },
1139         { "IN1R Mux", "DMIC2", "DMIC2R" },
1140
1141         { "IN2L Mux", "ADC", "ADCL" },
1142         { "IN2L Mux", "DMIC1", "DMIC1L" },
1143         { "IN2L Mux", "DMIC2", "DMIC2L" },
1144
1145         { "IN2R Mux", "ADC", "ADCR" },
1146         { "IN2R Mux", "DMIC1", "DMIC1R" },
1147         { "IN2R Mux", "DMIC2", "DMIC2R" },
1148
1149         { "Left Sidetone", "IN1", "IN1L Mux" },
1150         { "Left Sidetone", "IN2", "IN2L Mux" },
1151
1152         { "Right Sidetone", "IN1", "IN1R Mux" },
1153         { "Right Sidetone", "IN2", "IN2R Mux" },
1154
1155         { "DSP1TXL", "IN1 Switch", "IN1L Mux" },
1156         { "DSP1TXR", "IN1 Switch", "IN1R Mux" },
1157
1158         { "DSP2TXL", "IN1 Switch", "IN2L Mux" },
1159         { "DSP2TXR", "IN1 Switch", "IN2R Mux" },
1160
1161         { "AIF1TX0", NULL, "DSP1TXL" },
1162         { "AIF1TX1", NULL, "DSP1TXR" },
1163         { "AIF1TX2", NULL, "DSP2TXL" },
1164         { "AIF1TX3", NULL, "DSP2TXR" },
1165         { "AIF1TX4", NULL, "AIF2RX0" },
1166         { "AIF1TX5", NULL, "AIF2RX1" },
1167
1168         { "AIF1RX0", NULL, "AIFCLK" },
1169         { "AIF1RX1", NULL, "AIFCLK" },
1170         { "AIF1RX2", NULL, "AIFCLK" },
1171         { "AIF1RX3", NULL, "AIFCLK" },
1172         { "AIF1RX4", NULL, "AIFCLK" },
1173         { "AIF1RX5", NULL, "AIFCLK" },
1174
1175         { "AIF2RX0", NULL, "AIFCLK" },
1176         { "AIF2RX1", NULL, "AIFCLK" },
1177
1178         { "AIF1TX0", NULL, "AIFCLK" },
1179         { "AIF1TX1", NULL, "AIFCLK" },
1180         { "AIF1TX2", NULL, "AIFCLK" },
1181         { "AIF1TX3", NULL, "AIFCLK" },
1182         { "AIF1TX4", NULL, "AIFCLK" },
1183         { "AIF1TX5", NULL, "AIFCLK" },
1184
1185         { "AIF2TX0", NULL, "AIFCLK" },
1186         { "AIF2TX1", NULL, "AIFCLK" },
1187
1188         { "DSP1RXL", NULL, "SYSDSPCLK" },
1189         { "DSP1RXR", NULL, "SYSDSPCLK" },
1190         { "DSP2RXL", NULL, "SYSDSPCLK" },
1191         { "DSP2RXR", NULL, "SYSDSPCLK" },
1192         { "DSP1TXL", NULL, "SYSDSPCLK" },
1193         { "DSP1TXR", NULL, "SYSDSPCLK" },
1194         { "DSP2TXL", NULL, "SYSDSPCLK" },
1195         { "DSP2TXR", NULL, "SYSDSPCLK" },
1196
1197         { "AIF1RXA", NULL, "AIF1RX0" },
1198         { "AIF1RXA", NULL, "AIF1RX1" },
1199         { "AIF1RXB", NULL, "AIF1RX2" },
1200         { "AIF1RXB", NULL, "AIF1RX3" },
1201         { "AIF1RXC", NULL, "AIF1RX4" },
1202         { "AIF1RXC", NULL, "AIF1RX5" },
1203
1204         { "AIF2RX", NULL, "AIF2RX0" },
1205         { "AIF2RX", NULL, "AIF2RX1" },
1206
1207         { "AIF2TX", "DSP2", "DSP2TX" },
1208         { "AIF2TX", "DSP1", "DSP1RX" },
1209         { "AIF2TX", "AIF1", "AIF1RXC" },
1210
1211         { "DSP1RXL", NULL, "DSP1RX" },
1212         { "DSP1RXR", NULL, "DSP1RX" },
1213         { "DSP2RXL", NULL, "DSP2RX" },
1214         { "DSP2RXR", NULL, "DSP2RX" },
1215
1216         { "DSP2TX", NULL, "DSP2TXL" },
1217         { "DSP2TX", NULL, "DSP2TXR" },
1218
1219         { "DSP1RX", "AIF1", "AIF1RXA" },
1220         { "DSP1RX", "AIF2", "AIF2RX" },
1221
1222         { "DSP2RX", "AIF1", "AIF1RXB" },
1223         { "DSP2RX", "AIF2", "AIF2RX" },
1224
1225         { "DAC2L Mixer", "DSP2 Switch", "DSP2RXL" },
1226         { "DAC2L Mixer", "DSP1 Switch", "DSP1RXL" },
1227         { "DAC2L Mixer", "Right Sidetone Switch", "Right Sidetone" },
1228         { "DAC2L Mixer", "Left Sidetone Switch", "Left Sidetone" },
1229
1230         { "DAC2R Mixer", "DSP2 Switch", "DSP2RXR" },
1231         { "DAC2R Mixer", "DSP1 Switch", "DSP1RXR" },
1232         { "DAC2R Mixer", "Right Sidetone Switch", "Right Sidetone" },
1233         { "DAC2R Mixer", "Left Sidetone Switch", "Left Sidetone" },
1234
1235         { "DAC1L Mixer", "DSP2 Switch", "DSP2RXL" },
1236         { "DAC1L Mixer", "DSP1 Switch", "DSP1RXL" },
1237         { "DAC1L Mixer", "Right Sidetone Switch", "Right Sidetone" },
1238         { "DAC1L Mixer", "Left Sidetone Switch", "Left Sidetone" },
1239
1240         { "DAC1R Mixer", "DSP2 Switch", "DSP2RXR" },
1241         { "DAC1R Mixer", "DSP1 Switch", "DSP1RXR" },
1242         { "DAC1R Mixer", "Right Sidetone Switch", "Right Sidetone" },
1243         { "DAC1R Mixer", "Left Sidetone Switch", "Left Sidetone" },
1244
1245         { "DAC1L", NULL, "DAC1L Mixer" },
1246         { "DAC1R", NULL, "DAC1R Mixer" },
1247         { "DAC2L", NULL, "DAC2L Mixer" },
1248         { "DAC2R", NULL, "DAC2R Mixer" },
1249
1250         { "HPOUT2L PGA", NULL, "Charge Pump" },
1251         { "HPOUT2L PGA", NULL, "Bandgap" },
1252         { "HPOUT2L PGA", NULL, "DAC2L" },
1253         { "HPOUT2L_DLY", NULL, "HPOUT2L PGA" },
1254         { "HPOUT2L_DCS", NULL, "HPOUT2L_DLY" },
1255         { "HPOUT2L_RMV_SHORT", NULL, "HPOUT2L_DCS" },
1256
1257         { "HPOUT2R PGA", NULL, "Charge Pump" },
1258         { "HPOUT2R PGA", NULL, "Bandgap" },
1259         { "HPOUT2R PGA", NULL, "DAC2R" },
1260         { "HPOUT2R_DLY", NULL, "HPOUT2R PGA" },
1261         { "HPOUT2R_DCS", NULL, "HPOUT2R_DLY" },
1262         { "HPOUT2R_RMV_SHORT", NULL, "HPOUT2R_DCS" },
1263
1264         { "HPOUT1L PGA", NULL, "Charge Pump" },
1265         { "HPOUT1L PGA", NULL, "Bandgap" },
1266         { "HPOUT1L PGA", NULL, "DAC1L" },
1267         { "HPOUT1L_DLY", NULL, "HPOUT1L PGA" },
1268         { "HPOUT1L_DCS", NULL, "HPOUT1L_DLY" },
1269         { "HPOUT1L_RMV_SHORT", NULL, "HPOUT1L_DCS" },
1270
1271         { "HPOUT1R PGA", NULL, "Charge Pump" },
1272         { "HPOUT1R PGA", NULL, "Bandgap" },
1273         { "HPOUT1R PGA", NULL, "DAC1R" },
1274         { "HPOUT1R_DLY", NULL, "HPOUT1R PGA" },
1275         { "HPOUT1R_DCS", NULL, "HPOUT1R_DLY" },
1276         { "HPOUT1R_RMV_SHORT", NULL, "HPOUT1R_DCS" },
1277
1278         { "HPOUT2L", NULL, "HPOUT2L_RMV_SHORT" },
1279         { "HPOUT2R", NULL, "HPOUT2R_RMV_SHORT" },
1280         { "HPOUT1L", NULL, "HPOUT1L_RMV_SHORT" },
1281         { "HPOUT1R", NULL, "HPOUT1R_RMV_SHORT" },
1282
1283         { "SPKL", "DAC1L", "DAC1L" },
1284         { "SPKL", "DAC1R", "DAC1R" },
1285         { "SPKL", "DAC2L", "DAC2L" },
1286         { "SPKL", "DAC2R", "DAC2R" },
1287
1288         { "SPKR", "DAC1L", "DAC1L" },
1289         { "SPKR", "DAC1R", "DAC1R" },
1290         { "SPKR", "DAC2L", "DAC2L" },
1291         { "SPKR", "DAC2R", "DAC2R" },
1292
1293         { "SPKL PGA", NULL, "SPKL" },
1294         { "SPKR PGA", NULL, "SPKR" },
1295
1296         { "SPKDAT", NULL, "SPKL PGA" },
1297         { "SPKDAT", NULL, "SPKR PGA" },
1298 };
1299
1300 static bool wm8996_readable_register(struct device *dev, unsigned int reg)
1301 {
1302         /* Due to the sparseness of the register map the compiler
1303          * output from an explicit switch statement ends up being much
1304          * more efficient than a table.
1305          */
1306         switch (reg) {
1307         case WM8996_SOFTWARE_RESET:
1308         case WM8996_POWER_MANAGEMENT_1:
1309         case WM8996_POWER_MANAGEMENT_2:
1310         case WM8996_POWER_MANAGEMENT_3:
1311         case WM8996_POWER_MANAGEMENT_4:
1312         case WM8996_POWER_MANAGEMENT_5:
1313         case WM8996_POWER_MANAGEMENT_6:
1314         case WM8996_POWER_MANAGEMENT_7:
1315         case WM8996_POWER_MANAGEMENT_8:
1316         case WM8996_LEFT_LINE_INPUT_VOLUME:
1317         case WM8996_RIGHT_LINE_INPUT_VOLUME:
1318         case WM8996_LINE_INPUT_CONTROL:
1319         case WM8996_DAC1_HPOUT1_VOLUME:
1320         case WM8996_DAC2_HPOUT2_VOLUME:
1321         case WM8996_DAC1_LEFT_VOLUME:
1322         case WM8996_DAC1_RIGHT_VOLUME:
1323         case WM8996_DAC2_LEFT_VOLUME:
1324         case WM8996_DAC2_RIGHT_VOLUME:
1325         case WM8996_OUTPUT1_LEFT_VOLUME:
1326         case WM8996_OUTPUT1_RIGHT_VOLUME:
1327         case WM8996_OUTPUT2_LEFT_VOLUME:
1328         case WM8996_OUTPUT2_RIGHT_VOLUME:
1329         case WM8996_MICBIAS_1:
1330         case WM8996_MICBIAS_2:
1331         case WM8996_LDO_1:
1332         case WM8996_LDO_2:
1333         case WM8996_ACCESSORY_DETECT_MODE_1:
1334         case WM8996_ACCESSORY_DETECT_MODE_2:
1335         case WM8996_HEADPHONE_DETECT_1:
1336         case WM8996_HEADPHONE_DETECT_2:
1337         case WM8996_MIC_DETECT_1:
1338         case WM8996_MIC_DETECT_2:
1339         case WM8996_MIC_DETECT_3:
1340         case WM8996_CHARGE_PUMP_1:
1341         case WM8996_CHARGE_PUMP_2:
1342         case WM8996_DC_SERVO_1:
1343         case WM8996_DC_SERVO_2:
1344         case WM8996_DC_SERVO_3:
1345         case WM8996_DC_SERVO_5:
1346         case WM8996_DC_SERVO_6:
1347         case WM8996_DC_SERVO_7:
1348         case WM8996_DC_SERVO_READBACK_0:
1349         case WM8996_ANALOGUE_HP_1:
1350         case WM8996_ANALOGUE_HP_2:
1351         case WM8996_CHIP_REVISION:
1352         case WM8996_CONTROL_INTERFACE_1:
1353         case WM8996_WRITE_SEQUENCER_CTRL_1:
1354         case WM8996_WRITE_SEQUENCER_CTRL_2:
1355         case WM8996_AIF_CLOCKING_1:
1356         case WM8996_AIF_CLOCKING_2:
1357         case WM8996_CLOCKING_1:
1358         case WM8996_CLOCKING_2:
1359         case WM8996_AIF_RATE:
1360         case WM8996_FLL_CONTROL_1:
1361         case WM8996_FLL_CONTROL_2:
1362         case WM8996_FLL_CONTROL_3:
1363         case WM8996_FLL_CONTROL_4:
1364         case WM8996_FLL_CONTROL_5:
1365         case WM8996_FLL_CONTROL_6:
1366         case WM8996_FLL_EFS_1:
1367         case WM8996_FLL_EFS_2:
1368         case WM8996_AIF1_CONTROL:
1369         case WM8996_AIF1_BCLK:
1370         case WM8996_AIF1_TX_LRCLK_1:
1371         case WM8996_AIF1_TX_LRCLK_2:
1372         case WM8996_AIF1_RX_LRCLK_1:
1373         case WM8996_AIF1_RX_LRCLK_2:
1374         case WM8996_AIF1TX_DATA_CONFIGURATION_1:
1375         case WM8996_AIF1TX_DATA_CONFIGURATION_2:
1376         case WM8996_AIF1RX_DATA_CONFIGURATION:
1377         case WM8996_AIF1TX_CHANNEL_0_CONFIGURATION:
1378         case WM8996_AIF1TX_CHANNEL_1_CONFIGURATION:
1379         case WM8996_AIF1TX_CHANNEL_2_CONFIGURATION:
1380         case WM8996_AIF1TX_CHANNEL_3_CONFIGURATION:
1381         case WM8996_AIF1TX_CHANNEL_4_CONFIGURATION:
1382         case WM8996_AIF1TX_CHANNEL_5_CONFIGURATION:
1383         case WM8996_AIF1RX_CHANNEL_0_CONFIGURATION:
1384         case WM8996_AIF1RX_CHANNEL_1_CONFIGURATION:
1385         case WM8996_AIF1RX_CHANNEL_2_CONFIGURATION:
1386         case WM8996_AIF1RX_CHANNEL_3_CONFIGURATION:
1387         case WM8996_AIF1RX_CHANNEL_4_CONFIGURATION:
1388         case WM8996_AIF1RX_CHANNEL_5_CONFIGURATION:
1389         case WM8996_AIF1RX_MONO_CONFIGURATION:
1390         case WM8996_AIF1TX_TEST:
1391         case WM8996_AIF2_CONTROL:
1392         case WM8996_AIF2_BCLK:
1393         case WM8996_AIF2_TX_LRCLK_1:
1394         case WM8996_AIF2_TX_LRCLK_2:
1395         case WM8996_AIF2_RX_LRCLK_1:
1396         case WM8996_AIF2_RX_LRCLK_2:
1397         case WM8996_AIF2TX_DATA_CONFIGURATION_1:
1398         case WM8996_AIF2TX_DATA_CONFIGURATION_2:
1399         case WM8996_AIF2RX_DATA_CONFIGURATION:
1400         case WM8996_AIF2TX_CHANNEL_0_CONFIGURATION:
1401         case WM8996_AIF2TX_CHANNEL_1_CONFIGURATION:
1402         case WM8996_AIF2RX_CHANNEL_0_CONFIGURATION:
1403         case WM8996_AIF2RX_CHANNEL_1_CONFIGURATION:
1404         case WM8996_AIF2RX_MONO_CONFIGURATION:
1405         case WM8996_AIF2TX_TEST:
1406         case WM8996_DSP1_TX_LEFT_VOLUME:
1407         case WM8996_DSP1_TX_RIGHT_VOLUME:
1408         case WM8996_DSP1_RX_LEFT_VOLUME:
1409         case WM8996_DSP1_RX_RIGHT_VOLUME:
1410         case WM8996_DSP1_TX_FILTERS:
1411         case WM8996_DSP1_RX_FILTERS_1:
1412         case WM8996_DSP1_RX_FILTERS_2:
1413         case WM8996_DSP1_DRC_1:
1414         case WM8996_DSP1_DRC_2:
1415         case WM8996_DSP1_DRC_3:
1416         case WM8996_DSP1_DRC_4:
1417         case WM8996_DSP1_DRC_5:
1418         case WM8996_DSP1_RX_EQ_GAINS_1:
1419         case WM8996_DSP1_RX_EQ_GAINS_2:
1420         case WM8996_DSP1_RX_EQ_BAND_1_A:
1421         case WM8996_DSP1_RX_EQ_BAND_1_B:
1422         case WM8996_DSP1_RX_EQ_BAND_1_PG:
1423         case WM8996_DSP1_RX_EQ_BAND_2_A:
1424         case WM8996_DSP1_RX_EQ_BAND_2_B:
1425         case WM8996_DSP1_RX_EQ_BAND_2_C:
1426         case WM8996_DSP1_RX_EQ_BAND_2_PG:
1427         case WM8996_DSP1_RX_EQ_BAND_3_A:
1428         case WM8996_DSP1_RX_EQ_BAND_3_B:
1429         case WM8996_DSP1_RX_EQ_BAND_3_C:
1430         case WM8996_DSP1_RX_EQ_BAND_3_PG:
1431         case WM8996_DSP1_RX_EQ_BAND_4_A:
1432         case WM8996_DSP1_RX_EQ_BAND_4_B:
1433         case WM8996_DSP1_RX_EQ_BAND_4_C:
1434         case WM8996_DSP1_RX_EQ_BAND_4_PG:
1435         case WM8996_DSP1_RX_EQ_BAND_5_A:
1436         case WM8996_DSP1_RX_EQ_BAND_5_B:
1437         case WM8996_DSP1_RX_EQ_BAND_5_PG:
1438         case WM8996_DSP2_TX_LEFT_VOLUME:
1439         case WM8996_DSP2_TX_RIGHT_VOLUME:
1440         case WM8996_DSP2_RX_LEFT_VOLUME:
1441         case WM8996_DSP2_RX_RIGHT_VOLUME:
1442         case WM8996_DSP2_TX_FILTERS:
1443         case WM8996_DSP2_RX_FILTERS_1:
1444         case WM8996_DSP2_RX_FILTERS_2:
1445         case WM8996_DSP2_DRC_1:
1446         case WM8996_DSP2_DRC_2:
1447         case WM8996_DSP2_DRC_3:
1448         case WM8996_DSP2_DRC_4:
1449         case WM8996_DSP2_DRC_5:
1450         case WM8996_DSP2_RX_EQ_GAINS_1:
1451         case WM8996_DSP2_RX_EQ_GAINS_2:
1452         case WM8996_DSP2_RX_EQ_BAND_1_A:
1453         case WM8996_DSP2_RX_EQ_BAND_1_B:
1454         case WM8996_DSP2_RX_EQ_BAND_1_PG:
1455         case WM8996_DSP2_RX_EQ_BAND_2_A:
1456         case WM8996_DSP2_RX_EQ_BAND_2_B:
1457         case WM8996_DSP2_RX_EQ_BAND_2_C:
1458         case WM8996_DSP2_RX_EQ_BAND_2_PG:
1459         case WM8996_DSP2_RX_EQ_BAND_3_A:
1460         case WM8996_DSP2_RX_EQ_BAND_3_B:
1461         case WM8996_DSP2_RX_EQ_BAND_3_C:
1462         case WM8996_DSP2_RX_EQ_BAND_3_PG:
1463         case WM8996_DSP2_RX_EQ_BAND_4_A:
1464         case WM8996_DSP2_RX_EQ_BAND_4_B:
1465         case WM8996_DSP2_RX_EQ_BAND_4_C:
1466         case WM8996_DSP2_RX_EQ_BAND_4_PG:
1467         case WM8996_DSP2_RX_EQ_BAND_5_A:
1468         case WM8996_DSP2_RX_EQ_BAND_5_B:
1469         case WM8996_DSP2_RX_EQ_BAND_5_PG:
1470         case WM8996_DAC1_MIXER_VOLUMES:
1471         case WM8996_DAC1_LEFT_MIXER_ROUTING:
1472         case WM8996_DAC1_RIGHT_MIXER_ROUTING:
1473         case WM8996_DAC2_MIXER_VOLUMES:
1474         case WM8996_DAC2_LEFT_MIXER_ROUTING:
1475         case WM8996_DAC2_RIGHT_MIXER_ROUTING:
1476         case WM8996_DSP1_TX_LEFT_MIXER_ROUTING:
1477         case WM8996_DSP1_TX_RIGHT_MIXER_ROUTING:
1478         case WM8996_DSP2_TX_LEFT_MIXER_ROUTING:
1479         case WM8996_DSP2_TX_RIGHT_MIXER_ROUTING:
1480         case WM8996_DSP_TX_MIXER_SELECT:
1481         case WM8996_DAC_SOFTMUTE:
1482         case WM8996_OVERSAMPLING:
1483         case WM8996_SIDETONE:
1484         case WM8996_GPIO_1:
1485         case WM8996_GPIO_2:
1486         case WM8996_GPIO_3:
1487         case WM8996_GPIO_4:
1488         case WM8996_GPIO_5:
1489         case WM8996_PULL_CONTROL_1:
1490         case WM8996_PULL_CONTROL_2:
1491         case WM8996_INTERRUPT_STATUS_1:
1492         case WM8996_INTERRUPT_STATUS_2:
1493         case WM8996_INTERRUPT_RAW_STATUS_2:
1494         case WM8996_INTERRUPT_STATUS_1_MASK:
1495         case WM8996_INTERRUPT_STATUS_2_MASK:
1496         case WM8996_INTERRUPT_CONTROL:
1497         case WM8996_LEFT_PDM_SPEAKER:
1498         case WM8996_RIGHT_PDM_SPEAKER:
1499         case WM8996_PDM_SPEAKER_MUTE_SEQUENCE:
1500         case WM8996_PDM_SPEAKER_VOLUME:
1501                 return 1;
1502         default:
1503                 return 0;
1504         }
1505 }
1506
1507 static bool wm8996_volatile_register(struct device *dev, unsigned int reg)
1508 {
1509         switch (reg) {
1510         case WM8996_SOFTWARE_RESET:
1511         case WM8996_CHIP_REVISION:
1512         case WM8996_LDO_1:
1513         case WM8996_LDO_2:
1514         case WM8996_INTERRUPT_STATUS_1:
1515         case WM8996_INTERRUPT_STATUS_2:
1516         case WM8996_INTERRUPT_RAW_STATUS_2:
1517         case WM8996_DC_SERVO_READBACK_0:
1518         case WM8996_DC_SERVO_2:
1519         case WM8996_DC_SERVO_6:
1520         case WM8996_DC_SERVO_7:
1521         case WM8996_FLL_CONTROL_6:
1522         case WM8996_MIC_DETECT_3:
1523         case WM8996_HEADPHONE_DETECT_1:
1524         case WM8996_HEADPHONE_DETECT_2:
1525                 return 1;
1526         default:
1527                 return 0;
1528         }
1529 }
1530
1531 static const int bclk_divs[] = {
1532         1, 2, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96
1533 };
1534
1535 static void wm8996_update_bclk(struct snd_soc_codec *codec)
1536 {
1537         struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
1538         int aif, best, cur_val, bclk_rate, bclk_reg, i;
1539
1540         /* Don't bother if we're in a low frequency idle mode that
1541          * can't support audio.
1542          */
1543         if (wm8996->sysclk < 64000)
1544                 return;
1545
1546         for (aif = 0; aif < WM8996_AIFS; aif++) {
1547                 switch (aif) {
1548                 case 0:
1549                         bclk_reg = WM8996_AIF1_BCLK;
1550                         break;
1551                 case 1:
1552                         bclk_reg = WM8996_AIF2_BCLK;
1553                         break;
1554                 }
1555
1556                 bclk_rate = wm8996->bclk_rate[aif];
1557
1558                 /* Pick a divisor for BCLK as close as we can get to ideal */
1559                 best = 0;
1560                 for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
1561                         cur_val = (wm8996->sysclk / bclk_divs[i]) - bclk_rate;
1562                         if (cur_val < 0) /* BCLK table is sorted */
1563                                 break;
1564                         best = i;
1565                 }
1566                 bclk_rate = wm8996->sysclk / bclk_divs[best];
1567                 dev_dbg(codec->dev, "Using BCLK_DIV %d for actual BCLK %dHz\n",
1568                         bclk_divs[best], bclk_rate);
1569
1570                 snd_soc_update_bits(codec, bclk_reg,
1571                                     WM8996_AIF1_BCLK_DIV_MASK, best);
1572         }
1573 }
1574
1575 static int wm8996_set_bias_level(struct snd_soc_codec *codec,
1576                                  enum snd_soc_bias_level level)
1577 {
1578         struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
1579         int ret;
1580
1581         switch (level) {
1582         case SND_SOC_BIAS_ON:
1583                 break;
1584         case SND_SOC_BIAS_PREPARE:
1585                 /* Put the MICBIASes into regulating mode */
1586                 snd_soc_update_bits(codec, WM8996_MICBIAS_1,
1587                                     WM8996_MICB1_MODE, 0);
1588                 snd_soc_update_bits(codec, WM8996_MICBIAS_2,
1589                                     WM8996_MICB2_MODE, 0);
1590                 break;
1591
1592         case SND_SOC_BIAS_STANDBY:
1593                 if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
1594                         ret = regulator_bulk_enable(ARRAY_SIZE(wm8996->supplies),
1595                                                     wm8996->supplies);
1596                         if (ret != 0) {
1597                                 dev_err(codec->dev,
1598                                         "Failed to enable supplies: %d\n",
1599                                         ret);
1600                                 return ret;
1601                         }
1602
1603                         if (wm8996->pdata.ldo_ena >= 0) {
1604                                 gpio_set_value_cansleep(wm8996->pdata.ldo_ena,
1605                                                         1);
1606                                 msleep(5);
1607                         }
1608
1609                         regcache_cache_only(codec->control_data, false);
1610                         regcache_sync(codec->control_data);
1611                 }
1612
1613                 /* Bypass the MICBIASes for lowest power */
1614                 snd_soc_update_bits(codec, WM8996_MICBIAS_1,
1615                                     WM8996_MICB1_MODE, WM8996_MICB1_MODE);
1616                 snd_soc_update_bits(codec, WM8996_MICBIAS_2,
1617                                     WM8996_MICB2_MODE, WM8996_MICB2_MODE);
1618                 break;
1619
1620         case SND_SOC_BIAS_OFF:
1621                 regcache_cache_only(codec->control_data, true);
1622                 if (wm8996->pdata.ldo_ena >= 0) {
1623                         gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 0);
1624                         regcache_cache_only(codec->control_data, true);
1625                 }
1626                 regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies),
1627                                        wm8996->supplies);
1628                 break;
1629         }
1630
1631         codec->dapm.bias_level = level;
1632
1633         return 0;
1634 }
1635
1636 static int wm8996_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
1637 {
1638         struct snd_soc_codec *codec = dai->codec;
1639         int aifctrl = 0;
1640         int bclk = 0;
1641         int lrclk_tx = 0;
1642         int lrclk_rx = 0;
1643         int aifctrl_reg, bclk_reg, lrclk_tx_reg, lrclk_rx_reg;
1644
1645         switch (dai->id) {
1646         case 0:
1647                 aifctrl_reg = WM8996_AIF1_CONTROL;
1648                 bclk_reg = WM8996_AIF1_BCLK;
1649                 lrclk_tx_reg = WM8996_AIF1_TX_LRCLK_2;
1650                 lrclk_rx_reg = WM8996_AIF1_RX_LRCLK_2;
1651                 break;
1652         case 1:
1653                 aifctrl_reg = WM8996_AIF2_CONTROL;
1654                 bclk_reg = WM8996_AIF2_BCLK;
1655                 lrclk_tx_reg = WM8996_AIF2_TX_LRCLK_2;
1656                 lrclk_rx_reg = WM8996_AIF2_RX_LRCLK_2;
1657                 break;
1658         default:
1659                 WARN(1, "Invalid dai id %d\n", dai->id);
1660                 return -EINVAL;
1661         }
1662
1663         switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1664         case SND_SOC_DAIFMT_NB_NF:
1665                 break;
1666         case SND_SOC_DAIFMT_IB_NF:
1667                 bclk |= WM8996_AIF1_BCLK_INV;
1668                 break;
1669         case SND_SOC_DAIFMT_NB_IF:
1670                 lrclk_tx |= WM8996_AIF1TX_LRCLK_INV;
1671                 lrclk_rx |= WM8996_AIF1RX_LRCLK_INV;
1672                 break;
1673         case SND_SOC_DAIFMT_IB_IF:
1674                 bclk |= WM8996_AIF1_BCLK_INV;
1675                 lrclk_tx |= WM8996_AIF1TX_LRCLK_INV;
1676                 lrclk_rx |= WM8996_AIF1RX_LRCLK_INV;
1677                 break;
1678         }
1679
1680         switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
1681         case SND_SOC_DAIFMT_CBS_CFS:
1682                 break;
1683         case SND_SOC_DAIFMT_CBS_CFM:
1684                 lrclk_tx |= WM8996_AIF1TX_LRCLK_MSTR;
1685                 lrclk_rx |= WM8996_AIF1RX_LRCLK_MSTR;
1686                 break;
1687         case SND_SOC_DAIFMT_CBM_CFS:
1688                 bclk |= WM8996_AIF1_BCLK_MSTR;
1689                 break;
1690         case SND_SOC_DAIFMT_CBM_CFM:
1691                 bclk |= WM8996_AIF1_BCLK_MSTR;
1692                 lrclk_tx |= WM8996_AIF1TX_LRCLK_MSTR;
1693                 lrclk_rx |= WM8996_AIF1RX_LRCLK_MSTR;
1694                 break;
1695         default:
1696                 return -EINVAL;
1697         }
1698
1699         switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1700         case SND_SOC_DAIFMT_DSP_A:
1701                 break;
1702         case SND_SOC_DAIFMT_DSP_B:
1703                 aifctrl |= 1;
1704                 break;
1705         case SND_SOC_DAIFMT_I2S:
1706                 aifctrl |= 2;
1707                 break;
1708         case SND_SOC_DAIFMT_LEFT_J:
1709                 aifctrl |= 3;
1710                 break;
1711         default:
1712                 return -EINVAL;
1713         }
1714
1715         snd_soc_update_bits(codec, aifctrl_reg, WM8996_AIF1_FMT_MASK, aifctrl);
1716         snd_soc_update_bits(codec, bclk_reg,
1717                             WM8996_AIF1_BCLK_INV | WM8996_AIF1_BCLK_MSTR,
1718                             bclk);
1719         snd_soc_update_bits(codec, lrclk_tx_reg,
1720                             WM8996_AIF1TX_LRCLK_INV |
1721                             WM8996_AIF1TX_LRCLK_MSTR,
1722                             lrclk_tx);
1723         snd_soc_update_bits(codec, lrclk_rx_reg,
1724                             WM8996_AIF1RX_LRCLK_INV |
1725                             WM8996_AIF1RX_LRCLK_MSTR,
1726                             lrclk_rx);
1727
1728         return 0;
1729 }
1730
1731 static const int dsp_divs[] = {
1732         48000, 32000, 16000, 8000
1733 };
1734
1735 static int wm8996_hw_params(struct snd_pcm_substream *substream,
1736                             struct snd_pcm_hw_params *params,
1737                             struct snd_soc_dai *dai)
1738 {
1739         struct snd_soc_codec *codec = dai->codec;
1740         struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
1741         int bits, i, bclk_rate, best;
1742         int aifdata = 0;
1743         int lrclk = 0;
1744         int dsp = 0;
1745         int aifdata_reg, lrclk_reg, dsp_shift;
1746
1747         switch (dai->id) {
1748         case 0:
1749                 if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK ||
1750                     (snd_soc_read(codec, WM8996_GPIO_1)) & WM8996_GP1_FN_MASK) {
1751                         aifdata_reg = WM8996_AIF1RX_DATA_CONFIGURATION;
1752                         lrclk_reg = WM8996_AIF1_RX_LRCLK_1;
1753                 } else {
1754                         aifdata_reg = WM8996_AIF1TX_DATA_CONFIGURATION_1;
1755                         lrclk_reg = WM8996_AIF1_TX_LRCLK_1;
1756                 }
1757                 dsp_shift = 0;
1758                 break;
1759         case 1:
1760                 if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK ||
1761                     (snd_soc_read(codec, WM8996_GPIO_2)) & WM8996_GP2_FN_MASK) {
1762                         aifdata_reg = WM8996_AIF2RX_DATA_CONFIGURATION;
1763                         lrclk_reg = WM8996_AIF2_RX_LRCLK_1;
1764                 } else {
1765                         aifdata_reg = WM8996_AIF2TX_DATA_CONFIGURATION_1;
1766                         lrclk_reg = WM8996_AIF2_TX_LRCLK_1;
1767                 }
1768                 dsp_shift = WM8996_DSP2_DIV_SHIFT;
1769                 break;
1770         default:
1771                 WARN(1, "Invalid dai id %d\n", dai->id);
1772                 return -EINVAL;
1773         }
1774
1775         bclk_rate = snd_soc_params_to_bclk(params);
1776         if (bclk_rate < 0) {
1777                 dev_err(codec->dev, "Unsupported BCLK rate: %d\n", bclk_rate);
1778                 return bclk_rate;
1779         }
1780
1781         wm8996->bclk_rate[dai->id] = bclk_rate;
1782         wm8996->rx_rate[dai->id] = params_rate(params);
1783
1784         /* Needs looking at for TDM */
1785         bits = snd_pcm_format_width(params_format(params));
1786         if (bits < 0)
1787                 return bits;
1788         aifdata |= (bits << WM8996_AIF1TX_WL_SHIFT) | bits;
1789
1790         best = 0;
1791         for (i = 0; i < ARRAY_SIZE(dsp_divs); i++) {
1792                 if (abs(dsp_divs[i] - params_rate(params)) <
1793                     abs(dsp_divs[best] - params_rate(params)))
1794                         best = i;
1795         }
1796         dsp |= i << dsp_shift;
1797
1798         wm8996_update_bclk(codec);
1799
1800         lrclk = bclk_rate / params_rate(params);
1801         dev_dbg(dai->dev, "Using LRCLK rate %d for actual LRCLK %dHz\n",
1802                 lrclk, bclk_rate / lrclk);
1803
1804         snd_soc_update_bits(codec, aifdata_reg,
1805                             WM8996_AIF1TX_WL_MASK |
1806                             WM8996_AIF1TX_SLOT_LEN_MASK,
1807                             aifdata);
1808         snd_soc_update_bits(codec, lrclk_reg, WM8996_AIF1RX_RATE_MASK,
1809                             lrclk);
1810         snd_soc_update_bits(codec, WM8996_AIF_CLOCKING_2,
1811                             WM8996_DSP1_DIV_MASK << dsp_shift, dsp);
1812
1813         return 0;
1814 }
1815
1816 static int wm8996_set_sysclk(struct snd_soc_dai *dai,
1817                 int clk_id, unsigned int freq, int dir)
1818 {
1819         struct snd_soc_codec *codec = dai->codec;
1820         struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
1821         int lfclk = 0;
1822         int ratediv = 0;
1823         int sync = WM8996_REG_SYNC;
1824         int src;
1825         int old;
1826
1827         if (freq == wm8996->sysclk && clk_id == wm8996->sysclk_src)
1828                 return 0;
1829
1830         /* Disable SYSCLK while we reconfigure */
1831         old = snd_soc_read(codec, WM8996_AIF_CLOCKING_1) & WM8996_SYSCLK_ENA;
1832         snd_soc_update_bits(codec, WM8996_AIF_CLOCKING_1,
1833                             WM8996_SYSCLK_ENA, 0);
1834
1835         switch (clk_id) {
1836         case WM8996_SYSCLK_MCLK1:
1837                 wm8996->sysclk = freq;
1838                 src = 0;
1839                 break;
1840         case WM8996_SYSCLK_MCLK2:
1841                 wm8996->sysclk = freq;
1842                 src = 1;
1843                 break;
1844         case WM8996_SYSCLK_FLL:
1845                 wm8996->sysclk = freq;
1846                 src = 2;
1847                 break;
1848         default:
1849                 dev_err(codec->dev, "Unsupported clock source %d\n", clk_id);
1850                 return -EINVAL;
1851         }
1852
1853         switch (wm8996->sysclk) {
1854         case 5644800:
1855         case 6144000:
1856                 snd_soc_update_bits(codec, WM8996_AIF_RATE,
1857                                     WM8996_SYSCLK_RATE, 0);
1858                 break;
1859         case 22579200:
1860         case 24576000:
1861                 ratediv = WM8996_SYSCLK_DIV;
1862                 wm8996->sysclk /= 2;
1863         case 11289600:
1864         case 12288000:
1865                 snd_soc_update_bits(codec, WM8996_AIF_RATE,
1866                                     WM8996_SYSCLK_RATE, WM8996_SYSCLK_RATE);
1867                 break;
1868         case 32000:
1869         case 32768:
1870                 lfclk = WM8996_LFCLK_ENA;
1871                 sync = 0;
1872                 break;
1873         default:
1874                 dev_warn(codec->dev, "Unsupported clock rate %dHz\n",
1875                          wm8996->sysclk);
1876                 return -EINVAL;
1877         }
1878
1879         wm8996_update_bclk(codec);
1880
1881         snd_soc_update_bits(codec, WM8996_AIF_CLOCKING_1,
1882                             WM8996_SYSCLK_SRC_MASK | WM8996_SYSCLK_DIV_MASK,
1883                             src << WM8996_SYSCLK_SRC_SHIFT | ratediv);
1884         snd_soc_update_bits(codec, WM8996_CLOCKING_1, WM8996_LFCLK_ENA, lfclk);
1885         snd_soc_update_bits(codec, WM8996_CONTROL_INTERFACE_1,
1886                             WM8996_REG_SYNC, sync);
1887         snd_soc_update_bits(codec, WM8996_AIF_CLOCKING_1,
1888                             WM8996_SYSCLK_ENA, old);
1889
1890         wm8996->sysclk_src = clk_id;
1891
1892         return 0;
1893 }
1894
1895 struct _fll_div {
1896         u16 fll_fratio;
1897         u16 fll_outdiv;
1898         u16 fll_refclk_div;
1899         u16 fll_loop_gain;
1900         u16 fll_ref_freq;
1901         u16 n;
1902         u16 theta;
1903         u16 lambda;
1904 };
1905
1906 static struct {
1907         unsigned int min;
1908         unsigned int max;
1909         u16 fll_fratio;
1910         int ratio;
1911 } fll_fratios[] = {
1912         {       0,    64000, 4, 16 },
1913         {   64000,   128000, 3,  8 },
1914         {  128000,   256000, 2,  4 },
1915         {  256000,  1000000, 1,  2 },
1916         { 1000000, 13500000, 0,  1 },
1917 };
1918
1919 static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
1920                        unsigned int Fout)
1921 {
1922         unsigned int target;
1923         unsigned int div;
1924         unsigned int fratio, gcd_fll;
1925         int i;
1926
1927         /* Fref must be <=13.5MHz */
1928         div = 1;
1929         fll_div->fll_refclk_div = 0;
1930         while ((Fref / div) > 13500000) {
1931                 div *= 2;
1932                 fll_div->fll_refclk_div++;
1933
1934                 if (div > 8) {
1935                         pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
1936                                Fref);
1937                         return -EINVAL;
1938                 }
1939         }
1940
1941         pr_debug("FLL Fref=%u Fout=%u\n", Fref, Fout);
1942
1943         /* Apply the division for our remaining calculations */
1944         Fref /= div;
1945
1946         if (Fref >= 3000000)
1947                 fll_div->fll_loop_gain = 5;
1948         else
1949                 fll_div->fll_loop_gain = 0;
1950
1951         if (Fref >= 48000)
1952                 fll_div->fll_ref_freq = 0;
1953         else
1954                 fll_div->fll_ref_freq = 1;
1955
1956         /* Fvco should be 90-100MHz; don't check the upper bound */
1957         div = 2;
1958         while (Fout * div < 90000000) {
1959                 div++;
1960                 if (div > 64) {
1961                         pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
1962                                Fout);
1963                         return -EINVAL;
1964                 }
1965         }
1966         target = Fout * div;
1967         fll_div->fll_outdiv = div - 1;
1968
1969         pr_debug("FLL Fvco=%dHz\n", target);
1970
1971         /* Find an appropraite FLL_FRATIO and factor it out of the target */
1972         for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
1973                 if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
1974                         fll_div->fll_fratio = fll_fratios[i].fll_fratio;
1975                         fratio = fll_fratios[i].ratio;
1976                         break;
1977                 }
1978         }
1979         if (i == ARRAY_SIZE(fll_fratios)) {
1980                 pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
1981                 return -EINVAL;
1982         }
1983
1984         fll_div->n = target / (fratio * Fref);
1985
1986         if (target % Fref == 0) {
1987                 fll_div->theta = 0;
1988                 fll_div->lambda = 0;
1989         } else {
1990                 gcd_fll = gcd(target, fratio * Fref);
1991
1992                 fll_div->theta = (target - (fll_div->n * fratio * Fref))
1993                         / gcd_fll;
1994                 fll_div->lambda = (fratio * Fref) / gcd_fll;
1995         }
1996
1997         pr_debug("FLL N=%x THETA=%x LAMBDA=%x\n",
1998                  fll_div->n, fll_div->theta, fll_div->lambda);
1999         pr_debug("FLL_FRATIO=%x FLL_OUTDIV=%x FLL_REFCLK_DIV=%x\n",
2000                  fll_div->fll_fratio, fll_div->fll_outdiv,
2001                  fll_div->fll_refclk_div);
2002
2003         return 0;
2004 }
2005
2006 static int wm8996_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
2007                           unsigned int Fref, unsigned int Fout)
2008 {
2009         struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
2010         struct i2c_client *i2c = to_i2c_client(codec->dev);
2011         struct _fll_div fll_div;
2012         unsigned long timeout;
2013         int ret, reg, retry;
2014
2015         /* Any change? */
2016         if (source == wm8996->fll_src && Fref == wm8996->fll_fref &&
2017             Fout == wm8996->fll_fout)
2018                 return 0;
2019
2020         if (Fout == 0) {
2021                 dev_dbg(codec->dev, "FLL disabled\n");
2022
2023                 wm8996->fll_fref = 0;
2024                 wm8996->fll_fout = 0;
2025
2026                 snd_soc_update_bits(codec, WM8996_FLL_CONTROL_1,
2027                                     WM8996_FLL_ENA, 0);
2028
2029                 wm8996_bg_disable(codec);
2030
2031                 return 0;
2032         }
2033
2034         ret = fll_factors(&fll_div, Fref, Fout);
2035         if (ret != 0)
2036                 return ret;
2037
2038         switch (source) {
2039         case WM8996_FLL_MCLK1:
2040                 reg = 0;
2041                 break;
2042         case WM8996_FLL_MCLK2:
2043                 reg = 1;
2044                 break;
2045         case WM8996_FLL_DACLRCLK1:
2046                 reg = 2;
2047                 break;
2048         case WM8996_FLL_BCLK1:
2049                 reg = 3;
2050                 break;
2051         default:
2052                 dev_err(codec->dev, "Unknown FLL source %d\n", ret);
2053                 return -EINVAL;
2054         }
2055
2056         reg |= fll_div.fll_refclk_div << WM8996_FLL_REFCLK_DIV_SHIFT;
2057         reg |= fll_div.fll_ref_freq << WM8996_FLL_REF_FREQ_SHIFT;
2058
2059         snd_soc_update_bits(codec, WM8996_FLL_CONTROL_5,
2060                             WM8996_FLL_REFCLK_DIV_MASK | WM8996_FLL_REF_FREQ |
2061                             WM8996_FLL_REFCLK_SRC_MASK, reg);
2062
2063         reg = 0;
2064         if (fll_div.theta || fll_div.lambda)
2065                 reg |= WM8996_FLL_EFS_ENA | (3 << WM8996_FLL_LFSR_SEL_SHIFT);
2066         else
2067                 reg |= 1 << WM8996_FLL_LFSR_SEL_SHIFT;
2068         snd_soc_write(codec, WM8996_FLL_EFS_2, reg);
2069
2070         snd_soc_update_bits(codec, WM8996_FLL_CONTROL_2,
2071                             WM8996_FLL_OUTDIV_MASK |
2072                             WM8996_FLL_FRATIO_MASK,
2073                             (fll_div.fll_outdiv << WM8996_FLL_OUTDIV_SHIFT) |
2074                             (fll_div.fll_fratio));
2075
2076         snd_soc_write(codec, WM8996_FLL_CONTROL_3, fll_div.theta);
2077
2078         snd_soc_update_bits(codec, WM8996_FLL_CONTROL_4,
2079                             WM8996_FLL_N_MASK | WM8996_FLL_LOOP_GAIN_MASK,
2080                             (fll_div.n << WM8996_FLL_N_SHIFT) |
2081                             fll_div.fll_loop_gain);
2082
2083         snd_soc_write(codec, WM8996_FLL_EFS_1, fll_div.lambda);
2084
2085         /* Enable the bandgap if it's not already enabled */
2086         ret = snd_soc_read(codec, WM8996_FLL_CONTROL_1);
2087         if (!(ret & WM8996_FLL_ENA))
2088                 wm8996_bg_enable(codec);
2089
2090         /* Clear any pending completions (eg, from failed startups) */
2091         try_wait_for_completion(&wm8996->fll_lock);
2092
2093         snd_soc_update_bits(codec, WM8996_FLL_CONTROL_1,
2094                             WM8996_FLL_ENA, WM8996_FLL_ENA);
2095
2096         /* The FLL supports live reconfiguration - kick that in case we were
2097          * already enabled.
2098          */
2099         snd_soc_write(codec, WM8996_FLL_CONTROL_6, WM8996_FLL_SWITCH_CLK);
2100
2101         /* Wait for the FLL to lock, using the interrupt if possible */
2102         if (Fref > 1000000)
2103                 timeout = usecs_to_jiffies(300);
2104         else
2105                 timeout = msecs_to_jiffies(2);
2106
2107         /* Allow substantially longer if we've actually got the IRQ, poll
2108          * at a slightly higher rate if we don't.
2109          */
2110         if (i2c->irq)
2111                 timeout *= 10;
2112         else
2113                 timeout /= 2;
2114
2115         for (retry = 0; retry < 10; retry++) {
2116                 ret = wait_for_completion_timeout(&wm8996->fll_lock,
2117                                                   timeout);
2118                 if (ret != 0) {
2119                         WARN_ON(!i2c->irq);
2120                         break;
2121                 }
2122
2123                 ret = snd_soc_read(codec, WM8996_INTERRUPT_RAW_STATUS_2);
2124                 if (ret & WM8996_FLL_LOCK_STS)
2125                         break;
2126         }
2127         if (retry == 10) {
2128                 dev_err(codec->dev, "Timed out waiting for FLL\n");
2129                 ret = -ETIMEDOUT;
2130         }
2131
2132         dev_dbg(codec->dev, "FLL configured for %dHz->%dHz\n", Fref, Fout);
2133
2134         wm8996->fll_fref = Fref;
2135         wm8996->fll_fout = Fout;
2136         wm8996->fll_src = source;
2137
2138         return ret;
2139 }
2140
2141 #ifdef CONFIG_GPIOLIB
2142 static inline struct wm8996_priv *gpio_to_wm8996(struct gpio_chip *chip)
2143 {
2144         return container_of(chip, struct wm8996_priv, gpio_chip);
2145 }
2146
2147 static void wm8996_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
2148 {
2149         struct wm8996_priv *wm8996 = gpio_to_wm8996(chip);
2150
2151         regmap_update_bits(wm8996->regmap, WM8996_GPIO_1 + offset,
2152                            WM8996_GP1_LVL, !!value << WM8996_GP1_LVL_SHIFT);
2153 }
2154
2155 static int wm8996_gpio_direction_out(struct gpio_chip *chip,
2156                                      unsigned offset, int value)
2157 {
2158         struct wm8996_priv *wm8996 = gpio_to_wm8996(chip);
2159         int val;
2160
2161         val = (1 << WM8996_GP1_FN_SHIFT) | (!!value << WM8996_GP1_LVL_SHIFT);
2162
2163         return regmap_update_bits(wm8996->regmap, WM8996_GPIO_1 + offset,
2164                                   WM8996_GP1_FN_MASK | WM8996_GP1_DIR |
2165                                   WM8996_GP1_LVL, val);
2166 }
2167
2168 static int wm8996_gpio_get(struct gpio_chip *chip, unsigned offset)
2169 {
2170         struct wm8996_priv *wm8996 = gpio_to_wm8996(chip);
2171         unsigned int reg;
2172         int ret;
2173
2174         ret = regmap_read(wm8996->regmap, WM8996_GPIO_1 + offset, &reg);
2175         if (ret < 0)
2176                 return ret;
2177
2178         return (reg & WM8996_GP1_LVL) != 0;
2179 }
2180
2181 static int wm8996_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
2182 {
2183         struct wm8996_priv *wm8996 = gpio_to_wm8996(chip);
2184
2185         return regmap_update_bits(wm8996->regmap, WM8996_GPIO_1 + offset,
2186                                   WM8996_GP1_FN_MASK | WM8996_GP1_DIR,
2187                                   (1 << WM8996_GP1_FN_SHIFT) |
2188                                   (1 << WM8996_GP1_DIR_SHIFT));
2189 }
2190
2191 static struct gpio_chip wm8996_template_chip = {
2192         .label                  = "wm8996",
2193         .owner                  = THIS_MODULE,
2194         .direction_output       = wm8996_gpio_direction_out,
2195         .set                    = wm8996_gpio_set,
2196         .direction_input        = wm8996_gpio_direction_in,
2197         .get                    = wm8996_gpio_get,
2198         .can_sleep              = 1,
2199 };
2200
2201 static void wm8996_init_gpio(struct wm8996_priv *wm8996)
2202 {
2203         int ret;
2204
2205         wm8996->gpio_chip = wm8996_template_chip;
2206         wm8996->gpio_chip.ngpio = 5;
2207         wm8996->gpio_chip.dev = wm8996->dev;
2208
2209         if (wm8996->pdata.gpio_base)
2210                 wm8996->gpio_chip.base = wm8996->pdata.gpio_base;
2211         else
2212                 wm8996->gpio_chip.base = -1;
2213
2214         ret = gpiochip_add(&wm8996->gpio_chip);
2215         if (ret != 0)
2216                 dev_err(wm8996->dev, "Failed to add GPIOs: %d\n", ret);
2217 }
2218
2219 static void wm8996_free_gpio(struct wm8996_priv *wm8996)
2220 {
2221         int ret;
2222
2223         ret = gpiochip_remove(&wm8996->gpio_chip);
2224         if (ret != 0)
2225                 dev_err(wm8996->dev, "Failed to remove GPIOs: %d\n", ret);
2226 }
2227 #else
2228 static void wm8996_init_gpio(struct wm8996_priv *wm8996)
2229 {
2230 }
2231
2232 static void wm8996_free_gpio(struct wm8996_priv *wm8996)
2233 {
2234 }
2235 #endif
2236
2237 /**
2238  * wm8996_detect - Enable default WM8996 jack detection
2239  *
2240  * The WM8996 has advanced accessory detection support for headsets.
2241  * This function provides a default implementation which integrates
2242  * the majority of this functionality with minimal user configuration.
2243  *
2244  * This will detect headset, headphone and short circuit button and
2245  * will also detect inverted microphone ground connections and update
2246  * the polarity of the connections.
2247  */
2248 int wm8996_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack,
2249                   wm8996_polarity_fn polarity_cb)
2250 {
2251         struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
2252
2253         wm8996->jack = jack;
2254         wm8996->detecting = true;
2255         wm8996->polarity_cb = polarity_cb;
2256         wm8996->jack_flips = 0;
2257
2258         if (wm8996->polarity_cb)
2259                 wm8996->polarity_cb(codec, 0);
2260
2261         /* Clear discarge to avoid noise during detection */
2262         snd_soc_update_bits(codec, WM8996_MICBIAS_1,
2263                             WM8996_MICB1_DISCH, 0);
2264         snd_soc_update_bits(codec, WM8996_MICBIAS_2,
2265                             WM8996_MICB2_DISCH, 0);
2266
2267         /* LDO2 powers the microphones, SYSCLK clocks detection */
2268         snd_soc_dapm_force_enable_pin(&codec->dapm, "LDO2");
2269         snd_soc_dapm_force_enable_pin(&codec->dapm, "SYSCLK");
2270
2271         /* We start off just enabling microphone detection - even a
2272          * plain headphone will trigger detection.
2273          */
2274         snd_soc_update_bits(codec, WM8996_MIC_DETECT_1,
2275                             WM8996_MICD_ENA, WM8996_MICD_ENA);
2276
2277         /* Slowest detection rate, gives debounce for initial detection */
2278         snd_soc_update_bits(codec, WM8996_MIC_DETECT_1,
2279                             WM8996_MICD_RATE_MASK,
2280                             WM8996_MICD_RATE_MASK);
2281
2282         /* Enable interrupts and we're off */
2283         snd_soc_update_bits(codec, WM8996_INTERRUPT_STATUS_2_MASK,
2284                             WM8996_IM_MICD_EINT | WM8996_HP_DONE_EINT, 0);
2285
2286         return 0;
2287 }
2288 EXPORT_SYMBOL_GPL(wm8996_detect);
2289
2290 static void wm8996_hpdet_irq(struct snd_soc_codec *codec)
2291 {
2292         struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
2293         int val, reg, report;
2294
2295         /* Assume headphone in error conditions; we need to report
2296          * something or we stall our state machine.
2297          */
2298         report = SND_JACK_HEADPHONE;
2299
2300         reg = snd_soc_read(codec, WM8996_HEADPHONE_DETECT_2);
2301         if (reg < 0) {
2302                 dev_err(codec->dev, "Failed to read HPDET status\n");
2303                 goto out;
2304         }
2305
2306         if (!(reg & WM8996_HP_DONE)) {
2307                 dev_err(codec->dev, "Got HPDET IRQ but HPDET is busy\n");
2308                 goto out;
2309         }
2310
2311         val = reg & WM8996_HP_LVL_MASK;
2312
2313         dev_dbg(codec->dev, "HPDET measured %d ohms\n", val);
2314
2315         /* If we've got high enough impedence then report as line,
2316          * otherwise assume headphone.
2317          */
2318         if (val >= 126)
2319                 report = SND_JACK_LINEOUT;
2320         else
2321                 report = SND_JACK_HEADPHONE;
2322
2323 out:
2324         if (wm8996->jack_mic)
2325                 report |= SND_JACK_MICROPHONE;
2326
2327         snd_soc_jack_report(wm8996->jack, report,
2328                             SND_JACK_LINEOUT | SND_JACK_HEADSET);
2329
2330         wm8996->detecting = false;
2331
2332         /* If the output isn't running re-clamp it */
2333         if (!(snd_soc_read(codec, WM8996_POWER_MANAGEMENT_1) &
2334               (WM8996_HPOUT1L_ENA | WM8996_HPOUT1R_RMV_SHORT)))
2335                 snd_soc_update_bits(codec, WM8996_ANALOGUE_HP_1,
2336                                     WM8996_HPOUT1L_RMV_SHORT |
2337                                     WM8996_HPOUT1R_RMV_SHORT, 0);
2338
2339         /* Go back to looking at the microphone */
2340         snd_soc_update_bits(codec, WM8996_ACCESSORY_DETECT_MODE_1,
2341                             WM8996_JD_MODE_MASK, 0);
2342         snd_soc_update_bits(codec, WM8996_MIC_DETECT_1, WM8996_MICD_ENA,
2343                             WM8996_MICD_ENA);
2344
2345         snd_soc_dapm_disable_pin(&codec->dapm, "Bandgap");
2346         snd_soc_dapm_sync(&codec->dapm);
2347 }
2348
2349 static void wm8996_hpdet_start(struct snd_soc_codec *codec)
2350 {
2351         /* Unclamp the output, we can't measure while we're shorting it */
2352         snd_soc_update_bits(codec, WM8996_ANALOGUE_HP_1,
2353                             WM8996_HPOUT1L_RMV_SHORT |
2354                             WM8996_HPOUT1R_RMV_SHORT,
2355                             WM8996_HPOUT1L_RMV_SHORT |
2356                             WM8996_HPOUT1R_RMV_SHORT);
2357
2358         /* We need bandgap for HPDET */
2359         snd_soc_dapm_force_enable_pin(&codec->dapm, "Bandgap");
2360         snd_soc_dapm_sync(&codec->dapm);
2361
2362         /* Go into headphone detect left mode */
2363         snd_soc_update_bits(codec, WM8996_MIC_DETECT_1, WM8996_MICD_ENA, 0);
2364         snd_soc_update_bits(codec, WM8996_ACCESSORY_DETECT_MODE_1,
2365                             WM8996_JD_MODE_MASK, 1);
2366
2367         /* Trigger a measurement */
2368         snd_soc_update_bits(codec, WM8996_HEADPHONE_DETECT_1,
2369                             WM8996_HP_POLL, WM8996_HP_POLL);
2370 }
2371
2372 static void wm8996_report_headphone(struct snd_soc_codec *codec)
2373 {
2374         dev_dbg(codec->dev, "Headphone detected\n");
2375         wm8996_hpdet_start(codec);
2376
2377         /* Increase the detection rate a bit for responsiveness. */
2378         snd_soc_update_bits(codec, WM8996_MIC_DETECT_1,
2379                             WM8996_MICD_RATE_MASK |
2380                             WM8996_MICD_BIAS_STARTTIME_MASK,
2381                             7 << WM8996_MICD_RATE_SHIFT |
2382                             7 << WM8996_MICD_BIAS_STARTTIME_SHIFT);
2383 }
2384
2385 static void wm8996_micd(struct snd_soc_codec *codec)
2386 {
2387         struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
2388         int val, reg;
2389
2390         val = snd_soc_read(codec, WM8996_MIC_DETECT_3);
2391
2392         dev_dbg(codec->dev, "Microphone event: %x\n", val);
2393
2394         if (!(val & WM8996_MICD_VALID)) {
2395                 dev_warn(codec->dev, "Microphone detection state invalid\n");
2396                 return;
2397         }
2398
2399         /* No accessory, reset everything and report removal */
2400         if (!(val & WM8996_MICD_STS)) {
2401                 dev_dbg(codec->dev, "Jack removal detected\n");
2402                 wm8996->jack_mic = false;
2403                 wm8996->detecting = true;
2404                 wm8996->jack_flips = 0;
2405                 snd_soc_jack_report(wm8996->jack, 0,
2406                                     SND_JACK_LINEOUT | SND_JACK_HEADSET |
2407                                     SND_JACK_BTN_0);
2408
2409                 snd_soc_update_bits(codec, WM8996_MIC_DETECT_1,
2410                                     WM8996_MICD_RATE_MASK |
2411                                     WM8996_MICD_BIAS_STARTTIME_MASK,
2412                                     WM8996_MICD_RATE_MASK |
2413                                     9 << WM8996_MICD_BIAS_STARTTIME_SHIFT);
2414                 return;
2415         }
2416
2417         /* If the measurement is very high we've got a microphone,
2418          * either we just detected one or if we already reported then
2419          * we've got a button release event.
2420          */
2421         if (val & 0x400) {
2422                 if (wm8996->detecting) {
2423                         dev_dbg(codec->dev, "Microphone detected\n");
2424                         wm8996->jack_mic = true;
2425                         wm8996_hpdet_start(codec);
2426
2427                         /* Increase poll rate to give better responsiveness
2428                          * for buttons */
2429                         snd_soc_update_bits(codec, WM8996_MIC_DETECT_1,
2430                                             WM8996_MICD_RATE_MASK |
2431                                             WM8996_MICD_BIAS_STARTTIME_MASK,
2432                                             5 << WM8996_MICD_RATE_SHIFT |
2433                                             7 << WM8996_MICD_BIAS_STARTTIME_SHIFT);
2434                 } else {
2435                         dev_dbg(codec->dev, "Mic button up\n");
2436                         snd_soc_jack_report(wm8996->jack, 0, SND_JACK_BTN_0);
2437                 }
2438
2439                 return;
2440         }
2441
2442         /* If we detected a lower impedence during initial startup
2443          * then we probably have the wrong polarity, flip it.  Don't
2444          * do this for the lowest impedences to speed up detection of
2445          * plain headphones.  If both polarities report a low
2446          * impedence then give up and report headphones.
2447          */
2448         if (wm8996->detecting && (val & 0x3f0)) {
2449                 wm8996->jack_flips++;
2450
2451                 if (wm8996->jack_flips > 1) {
2452                         wm8996_report_headphone(codec);
2453                         return;
2454                 }
2455
2456                 reg = snd_soc_read(codec, WM8996_ACCESSORY_DETECT_MODE_2);
2457                 reg ^= WM8996_HPOUT1FB_SRC | WM8996_MICD_SRC |
2458                         WM8996_MICD_BIAS_SRC;
2459                 snd_soc_update_bits(codec, WM8996_ACCESSORY_DETECT_MODE_2,
2460                                     WM8996_HPOUT1FB_SRC | WM8996_MICD_SRC |
2461                                     WM8996_MICD_BIAS_SRC, reg);
2462
2463                 if (wm8996->polarity_cb)
2464                         wm8996->polarity_cb(codec,
2465                                             (reg & WM8996_MICD_SRC) != 0);
2466
2467                 dev_dbg(codec->dev, "Set microphone polarity to %d\n",
2468                         (reg & WM8996_MICD_SRC) != 0);
2469
2470                 return;
2471         }
2472
2473         /* Don't distinguish between buttons, just report any low
2474          * impedence as BTN_0.
2475          */
2476         if (val & 0x3fc) {
2477                 if (wm8996->jack_mic) {
2478                         dev_dbg(codec->dev, "Mic button detected\n");
2479                         snd_soc_jack_report(wm8996->jack, SND_JACK_BTN_0,
2480                                             SND_JACK_BTN_0);
2481                 } else if (wm8996->detecting) {
2482                         wm8996_report_headphone(codec);
2483                 }
2484         }
2485 }
2486
2487 static irqreturn_t wm8996_irq(int irq, void *data)
2488 {
2489         struct snd_soc_codec *codec = data;
2490         struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
2491         int irq_val;
2492
2493         irq_val = snd_soc_read(codec, WM8996_INTERRUPT_STATUS_2);
2494         if (irq_val < 0) {
2495                 dev_err(codec->dev, "Failed to read IRQ status: %d\n",
2496                         irq_val);
2497                 return IRQ_NONE;
2498         }
2499         irq_val &= ~snd_soc_read(codec, WM8996_INTERRUPT_STATUS_2_MASK);
2500
2501         if (!irq_val)
2502                 return IRQ_NONE;
2503
2504         snd_soc_write(codec, WM8996_INTERRUPT_STATUS_2, irq_val);
2505
2506         if (irq_val & (WM8996_DCS_DONE_01_EINT | WM8996_DCS_DONE_23_EINT)) {
2507                 dev_dbg(codec->dev, "DC servo IRQ\n");
2508                 complete(&wm8996->dcs_done);
2509         }
2510
2511         if (irq_val & WM8996_FIFOS_ERR_EINT)
2512                 dev_err(codec->dev, "Digital core FIFO error\n");
2513
2514         if (irq_val & WM8996_FLL_LOCK_EINT) {
2515                 dev_dbg(codec->dev, "FLL locked\n");
2516                 complete(&wm8996->fll_lock);
2517         }
2518
2519         if (irq_val & WM8996_MICD_EINT)
2520                 wm8996_micd(codec);
2521
2522         if (irq_val & WM8996_HP_DONE_EINT)
2523                 wm8996_hpdet_irq(codec);
2524
2525         return IRQ_HANDLED;
2526 }
2527
2528 static irqreturn_t wm8996_edge_irq(int irq, void *data)
2529 {
2530         irqreturn_t ret = IRQ_NONE;
2531         irqreturn_t val;
2532
2533         do {
2534                 val = wm8996_irq(irq, data);
2535                 if (val != IRQ_NONE)
2536                         ret = val;
2537         } while (val != IRQ_NONE);
2538
2539         return ret;
2540 }
2541
2542 static void wm8996_retune_mobile_pdata(struct snd_soc_codec *codec)
2543 {
2544         struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
2545         struct wm8996_pdata *pdata = &wm8996->pdata;
2546
2547         struct snd_kcontrol_new controls[] = {
2548                 SOC_ENUM_EXT("DSP1 EQ Mode",
2549                              wm8996->retune_mobile_enum,
2550                              wm8996_get_retune_mobile_enum,
2551                              wm8996_put_retune_mobile_enum),
2552                 SOC_ENUM_EXT("DSP2 EQ Mode",
2553                              wm8996->retune_mobile_enum,
2554                              wm8996_get_retune_mobile_enum,
2555                              wm8996_put_retune_mobile_enum),
2556         };
2557         int ret, i, j;
2558         const char **t;
2559
2560         /* We need an array of texts for the enum API but the number
2561          * of texts is likely to be less than the number of
2562          * configurations due to the sample rate dependency of the
2563          * configurations. */
2564         wm8996->num_retune_mobile_texts = 0;
2565         wm8996->retune_mobile_texts = NULL;
2566         for (i = 0; i < pdata->num_retune_mobile_cfgs; i++) {
2567                 for (j = 0; j < wm8996->num_retune_mobile_texts; j++) {
2568                         if (strcmp(pdata->retune_mobile_cfgs[i].name,
2569                                    wm8996->retune_mobile_texts[j]) == 0)
2570                                 break;
2571                 }
2572
2573                 if (j != wm8996->num_retune_mobile_texts)
2574                         continue;
2575
2576                 /* Expand the array... */
2577                 t = krealloc(wm8996->retune_mobile_texts,
2578                              sizeof(char *) *
2579                              (wm8996->num_retune_mobile_texts + 1),
2580                              GFP_KERNEL);
2581                 if (t == NULL)
2582                         continue;
2583
2584                 /* ...store the new entry... */
2585                 t[wm8996->num_retune_mobile_texts] =
2586                         pdata->retune_mobile_cfgs[i].name;
2587
2588                 /* ...and remember the new version. */
2589                 wm8996->num_retune_mobile_texts++;
2590                 wm8996->retune_mobile_texts = t;
2591         }
2592
2593         dev_dbg(codec->dev, "Allocated %d unique ReTune Mobile names\n",
2594                 wm8996->num_retune_mobile_texts);
2595
2596         wm8996->retune_mobile_enum.max = wm8996->num_retune_mobile_texts;
2597         wm8996->retune_mobile_enum.texts = wm8996->retune_mobile_texts;
2598
2599         ret = snd_soc_add_codec_controls(codec, controls, ARRAY_SIZE(controls));
2600         if (ret != 0)
2601                 dev_err(codec->dev,
2602                         "Failed to add ReTune Mobile controls: %d\n", ret);
2603 }
2604
2605 static const struct regmap_config wm8996_regmap = {
2606         .reg_bits = 16,
2607         .val_bits = 16,
2608
2609         .max_register = WM8996_MAX_REGISTER,
2610         .reg_defaults = wm8996_reg,
2611         .num_reg_defaults = ARRAY_SIZE(wm8996_reg),
2612         .volatile_reg = wm8996_volatile_register,
2613         .readable_reg = wm8996_readable_register,
2614         .cache_type = REGCACHE_RBTREE,
2615 };
2616
2617 static int wm8996_probe(struct snd_soc_codec *codec)
2618 {
2619         int ret;
2620         struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
2621         struct i2c_client *i2c = to_i2c_client(codec->dev);
2622         int irq_flags;
2623
2624         wm8996->codec = codec;
2625
2626         init_completion(&wm8996->dcs_done);
2627         init_completion(&wm8996->fll_lock);
2628
2629         codec->control_data = wm8996->regmap;
2630
2631         ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_REGMAP);
2632         if (ret != 0) {
2633                 dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
2634                 goto err;
2635         }
2636
2637         if (wm8996->pdata.num_retune_mobile_cfgs)
2638                 wm8996_retune_mobile_pdata(codec);
2639         else
2640                 snd_soc_add_codec_controls(codec, wm8996_eq_controls,
2641                                      ARRAY_SIZE(wm8996_eq_controls));
2642
2643         if (i2c->irq) {
2644                 if (wm8996->pdata.irq_flags)
2645                         irq_flags = wm8996->pdata.irq_flags;
2646                 else
2647                         irq_flags = IRQF_TRIGGER_LOW;
2648
2649                 irq_flags |= IRQF_ONESHOT;
2650
2651                 if (irq_flags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING))
2652                         ret = request_threaded_irq(i2c->irq, NULL,
2653                                                    wm8996_edge_irq,
2654                                                    irq_flags, "wm8996", codec);
2655                 else
2656                         ret = request_threaded_irq(i2c->irq, NULL, wm8996_irq,
2657                                                    irq_flags, "wm8996", codec);
2658
2659                 if (ret == 0) {
2660                         /* Unmask the interrupt */
2661                         snd_soc_update_bits(codec, WM8996_INTERRUPT_CONTROL,
2662                                             WM8996_IM_IRQ, 0);
2663
2664                         /* Enable error reporting and DC servo status */
2665                         snd_soc_update_bits(codec,
2666                                             WM8996_INTERRUPT_STATUS_2_MASK,
2667                                             WM8996_IM_DCS_DONE_23_EINT |
2668                                             WM8996_IM_DCS_DONE_01_EINT |
2669                                             WM8996_IM_FLL_LOCK_EINT |
2670                                             WM8996_IM_FIFOS_ERR_EINT,
2671                                             0);
2672                 } else {
2673                         dev_err(codec->dev, "Failed to request IRQ: %d\n",
2674                                 ret);
2675                 }
2676         }
2677
2678         return 0;
2679
2680 err:
2681         return ret;
2682 }
2683
2684 static int wm8996_remove(struct snd_soc_codec *codec)
2685 {
2686         struct i2c_client *i2c = to_i2c_client(codec->dev);
2687
2688         snd_soc_update_bits(codec, WM8996_INTERRUPT_CONTROL,
2689                             WM8996_IM_IRQ, WM8996_IM_IRQ);
2690
2691         if (i2c->irq)
2692                 free_irq(i2c->irq, codec);
2693
2694         return 0;
2695 }
2696
2697 static struct snd_soc_codec_driver soc_codec_dev_wm8996 = {
2698         .probe =        wm8996_probe,
2699         .remove =       wm8996_remove,
2700         .set_bias_level = wm8996_set_bias_level,
2701         .idle_bias_off  = true,
2702         .seq_notifier = wm8996_seq_notifier,
2703         .controls = wm8996_snd_controls,
2704         .num_controls = ARRAY_SIZE(wm8996_snd_controls),
2705         .dapm_widgets = wm8996_dapm_widgets,
2706         .num_dapm_widgets = ARRAY_SIZE(wm8996_dapm_widgets),
2707         .dapm_routes = wm8996_dapm_routes,
2708         .num_dapm_routes = ARRAY_SIZE(wm8996_dapm_routes),
2709         .set_pll = wm8996_set_fll,
2710 };
2711
2712 #define WM8996_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\
2713                       SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
2714                       SNDRV_PCM_RATE_48000)
2715 #define WM8996_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\
2716                         SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE |\
2717                         SNDRV_PCM_FMTBIT_S32_LE)
2718
2719 static const struct snd_soc_dai_ops wm8996_dai_ops = {
2720         .set_fmt = wm8996_set_fmt,
2721         .hw_params = wm8996_hw_params,
2722         .set_sysclk = wm8996_set_sysclk,
2723 };
2724
2725 static struct snd_soc_dai_driver wm8996_dai[] = {
2726         {
2727                 .name = "wm8996-aif1",
2728                 .playback = {
2729                         .stream_name = "AIF1 Playback",
2730                         .channels_min = 1,
2731                         .channels_max = 6,
2732                         .rates = WM8996_RATES,
2733                         .formats = WM8996_FORMATS,
2734                         .sig_bits = 24,
2735                 },
2736                 .capture = {
2737                          .stream_name = "AIF1 Capture",
2738                          .channels_min = 1,
2739                          .channels_max = 6,
2740                          .rates = WM8996_RATES,
2741                          .formats = WM8996_FORMATS,
2742                          .sig_bits = 24,
2743                  },
2744                 .ops = &wm8996_dai_ops,
2745         },
2746         {
2747                 .name = "wm8996-aif2",
2748                 .playback = {
2749                         .stream_name = "AIF2 Playback",
2750                         .channels_min = 1,
2751                         .channels_max = 2,
2752                         .rates = WM8996_RATES,
2753                         .formats = WM8996_FORMATS,
2754                         .sig_bits = 24,
2755                 },
2756                 .capture = {
2757                          .stream_name = "AIF2 Capture",
2758                          .channels_min = 1,
2759                          .channels_max = 2,
2760                          .rates = WM8996_RATES,
2761                          .formats = WM8996_FORMATS,
2762                         .sig_bits = 24,
2763                  },
2764                 .ops = &wm8996_dai_ops,
2765         },
2766 };
2767
2768 static int wm8996_i2c_probe(struct i2c_client *i2c,
2769                             const struct i2c_device_id *id)
2770 {
2771         struct wm8996_priv *wm8996;
2772         int ret, i;
2773         unsigned int reg;
2774
2775         wm8996 = devm_kzalloc(&i2c->dev, sizeof(struct wm8996_priv),
2776                               GFP_KERNEL);
2777         if (wm8996 == NULL)
2778                 return -ENOMEM;
2779
2780         i2c_set_clientdata(i2c, wm8996);
2781         wm8996->dev = &i2c->dev;
2782
2783         if (dev_get_platdata(&i2c->dev))
2784                 memcpy(&wm8996->pdata, dev_get_platdata(&i2c->dev),
2785                        sizeof(wm8996->pdata));
2786
2787         if (wm8996->pdata.ldo_ena > 0) {
2788                 ret = gpio_request_one(wm8996->pdata.ldo_ena,
2789                                        GPIOF_OUT_INIT_LOW, "WM8996 ENA");
2790                 if (ret < 0) {
2791                         dev_err(&i2c->dev, "Failed to request GPIO %d: %d\n",
2792                                 wm8996->pdata.ldo_ena, ret);
2793                         goto err;
2794                 }
2795         }
2796
2797         for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++)
2798                 wm8996->supplies[i].supply = wm8996_supply_names[i];
2799
2800         ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8996->supplies),
2801                                       wm8996->supplies);
2802         if (ret != 0) {
2803                 dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
2804                 goto err_gpio;
2805         }
2806
2807         wm8996->disable_nb[0].notifier_call = wm8996_regulator_event_0;
2808         wm8996->disable_nb[1].notifier_call = wm8996_regulator_event_1;
2809         wm8996->disable_nb[2].notifier_call = wm8996_regulator_event_2;
2810
2811         /* This should really be moved into the regulator core */
2812         for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++) {
2813                 ret = regulator_register_notifier(wm8996->supplies[i].consumer,
2814                                                   &wm8996->disable_nb[i]);
2815                 if (ret != 0) {
2816                         dev_err(&i2c->dev,
2817                                 "Failed to register regulator notifier: %d\n",
2818                                 ret);
2819                 }
2820         }
2821
2822         ret = regulator_bulk_enable(ARRAY_SIZE(wm8996->supplies),
2823                                     wm8996->supplies);
2824         if (ret != 0) {
2825                 dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
2826                 goto err_gpio;
2827         }
2828
2829         if (wm8996->pdata.ldo_ena > 0) {
2830                 gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 1);
2831                 msleep(5);
2832         }
2833
2834         wm8996->regmap = devm_regmap_init_i2c(i2c, &wm8996_regmap);
2835         if (IS_ERR(wm8996->regmap)) {
2836                 ret = PTR_ERR(wm8996->regmap);
2837                 dev_err(&i2c->dev, "regmap_init() failed: %d\n", ret);
2838                 goto err_enable;
2839         }
2840
2841         ret = regmap_read(wm8996->regmap, WM8996_SOFTWARE_RESET, &reg);
2842         if (ret < 0) {
2843                 dev_err(&i2c->dev, "Failed to read ID register: %d\n", ret);
2844                 goto err_regmap;
2845         }
2846         if (reg != 0x8915) {
2847                 dev_err(&i2c->dev, "Device is not a WM8996, ID %x\n", reg);
2848                 ret = -EINVAL;
2849                 goto err_regmap;
2850         }
2851
2852         ret = regmap_read(wm8996->regmap, WM8996_CHIP_REVISION, &reg);
2853         if (ret < 0) {
2854                 dev_err(&i2c->dev, "Failed to read device revision: %d\n",
2855                         ret);
2856                 goto err_regmap;
2857         }
2858
2859         dev_info(&i2c->dev, "revision %c\n",
2860                  (reg & WM8996_CHIP_REV_MASK) + 'A');
2861
2862         if (wm8996->pdata.ldo_ena > 0) {
2863                 gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 0);
2864                 regcache_cache_only(wm8996->regmap, true);
2865         } else {
2866                 ret = regmap_write(wm8996->regmap, WM8996_SOFTWARE_RESET,
2867                                    0x8915);
2868                 if (ret != 0) {
2869                         dev_err(&i2c->dev, "Failed to issue reset: %d\n", ret);
2870                         goto err_regmap;
2871                 }
2872         }
2873
2874         regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
2875
2876         /* Apply platform data settings */
2877         regmap_update_bits(wm8996->regmap, WM8996_LINE_INPUT_CONTROL,
2878                            WM8996_INL_MODE_MASK | WM8996_INR_MODE_MASK,
2879                            wm8996->pdata.inl_mode << WM8996_INL_MODE_SHIFT |
2880                            wm8996->pdata.inr_mode);
2881
2882         for (i = 0; i < ARRAY_SIZE(wm8996->pdata.gpio_default); i++) {
2883                 if (!wm8996->pdata.gpio_default[i])
2884                         continue;
2885
2886                 regmap_write(wm8996->regmap, WM8996_GPIO_1 + i,
2887                              wm8996->pdata.gpio_default[i] & 0xffff);
2888         }
2889
2890         if (wm8996->pdata.spkmute_seq)
2891                 regmap_update_bits(wm8996->regmap,
2892                                    WM8996_PDM_SPEAKER_MUTE_SEQUENCE,
2893                                    WM8996_SPK_MUTE_ENDIAN |
2894                                    WM8996_SPK_MUTE_SEQ1_MASK,
2895                                    wm8996->pdata.spkmute_seq);
2896
2897         regmap_update_bits(wm8996->regmap, WM8996_ACCESSORY_DETECT_MODE_2,
2898                            WM8996_MICD_BIAS_SRC | WM8996_HPOUT1FB_SRC |
2899                            WM8996_MICD_SRC, wm8996->pdata.micdet_def);
2900
2901         /* Latch volume update bits */
2902         regmap_update_bits(wm8996->regmap, WM8996_LEFT_LINE_INPUT_VOLUME,
2903                            WM8996_IN1_VU, WM8996_IN1_VU);
2904         regmap_update_bits(wm8996->regmap, WM8996_RIGHT_LINE_INPUT_VOLUME,
2905                            WM8996_IN1_VU, WM8996_IN1_VU);
2906
2907         regmap_update_bits(wm8996->regmap, WM8996_DAC1_LEFT_VOLUME,
2908                            WM8996_DAC1_VU, WM8996_DAC1_VU);
2909         regmap_update_bits(wm8996->regmap, WM8996_DAC1_RIGHT_VOLUME,
2910                            WM8996_DAC1_VU, WM8996_DAC1_VU);
2911         regmap_update_bits(wm8996->regmap, WM8996_DAC2_LEFT_VOLUME,
2912                            WM8996_DAC2_VU, WM8996_DAC2_VU);
2913         regmap_update_bits(wm8996->regmap, WM8996_DAC2_RIGHT_VOLUME,
2914                            WM8996_DAC2_VU, WM8996_DAC2_VU);
2915
2916         regmap_update_bits(wm8996->regmap, WM8996_OUTPUT1_LEFT_VOLUME,
2917                            WM8996_DAC1_VU, WM8996_DAC1_VU);
2918         regmap_update_bits(wm8996->regmap, WM8996_OUTPUT1_RIGHT_VOLUME,
2919                            WM8996_DAC1_VU, WM8996_DAC1_VU);
2920         regmap_update_bits(wm8996->regmap, WM8996_OUTPUT2_LEFT_VOLUME,
2921                            WM8996_DAC2_VU, WM8996_DAC2_VU);
2922         regmap_update_bits(wm8996->regmap, WM8996_OUTPUT2_RIGHT_VOLUME,
2923                            WM8996_DAC2_VU, WM8996_DAC2_VU);
2924
2925         regmap_update_bits(wm8996->regmap, WM8996_DSP1_TX_LEFT_VOLUME,
2926                            WM8996_DSP1TX_VU, WM8996_DSP1TX_VU);
2927         regmap_update_bits(wm8996->regmap, WM8996_DSP1_TX_RIGHT_VOLUME,
2928                            WM8996_DSP1TX_VU, WM8996_DSP1TX_VU);
2929         regmap_update_bits(wm8996->regmap, WM8996_DSP2_TX_LEFT_VOLUME,
2930                            WM8996_DSP2TX_VU, WM8996_DSP2TX_VU);
2931         regmap_update_bits(wm8996->regmap, WM8996_DSP2_TX_RIGHT_VOLUME,
2932                            WM8996_DSP2TX_VU, WM8996_DSP2TX_VU);
2933
2934         regmap_update_bits(wm8996->regmap, WM8996_DSP1_RX_LEFT_VOLUME,
2935                            WM8996_DSP1RX_VU, WM8996_DSP1RX_VU);
2936         regmap_update_bits(wm8996->regmap, WM8996_DSP1_RX_RIGHT_VOLUME,
2937                            WM8996_DSP1RX_VU, WM8996_DSP1RX_VU);
2938         regmap_update_bits(wm8996->regmap, WM8996_DSP2_RX_LEFT_VOLUME,
2939                            WM8996_DSP2RX_VU, WM8996_DSP2RX_VU);
2940         regmap_update_bits(wm8996->regmap, WM8996_DSP2_RX_RIGHT_VOLUME,
2941                            WM8996_DSP2RX_VU, WM8996_DSP2RX_VU);
2942
2943         /* No support currently for the underclocked TDM modes and
2944          * pick a default TDM layout with each channel pair working with
2945          * slots 0 and 1. */
2946         regmap_update_bits(wm8996->regmap,
2947                            WM8996_AIF1RX_CHANNEL_0_CONFIGURATION,
2948                            WM8996_AIF1RX_CHAN0_SLOTS_MASK |
2949                            WM8996_AIF1RX_CHAN0_START_SLOT_MASK,
2950                            1 << WM8996_AIF1RX_CHAN0_SLOTS_SHIFT | 0);
2951         regmap_update_bits(wm8996->regmap,
2952                            WM8996_AIF1RX_CHANNEL_1_CONFIGURATION,
2953                            WM8996_AIF1RX_CHAN1_SLOTS_MASK |
2954                            WM8996_AIF1RX_CHAN1_START_SLOT_MASK,
2955                            1 << WM8996_AIF1RX_CHAN1_SLOTS_SHIFT | 1);
2956         regmap_update_bits(wm8996->regmap,
2957                            WM8996_AIF1RX_CHANNEL_2_CONFIGURATION,
2958                            WM8996_AIF1RX_CHAN2_SLOTS_MASK |
2959                            WM8996_AIF1RX_CHAN2_START_SLOT_MASK,
2960                            1 << WM8996_AIF1RX_CHAN2_SLOTS_SHIFT | 0);
2961         regmap_update_bits(wm8996->regmap,
2962                            WM8996_AIF1RX_CHANNEL_3_CONFIGURATION,
2963                            WM8996_AIF1RX_CHAN3_SLOTS_MASK |
2964                            WM8996_AIF1RX_CHAN0_START_SLOT_MASK,
2965                            1 << WM8996_AIF1RX_CHAN3_SLOTS_SHIFT | 1);
2966         regmap_update_bits(wm8996->regmap,
2967                            WM8996_AIF1RX_CHANNEL_4_CONFIGURATION,
2968                            WM8996_AIF1RX_CHAN4_SLOTS_MASK |
2969                            WM8996_AIF1RX_CHAN0_START_SLOT_MASK,
2970                            1 << WM8996_AIF1RX_CHAN4_SLOTS_SHIFT | 0);
2971         regmap_update_bits(wm8996->regmap,
2972                            WM8996_AIF1RX_CHANNEL_5_CONFIGURATION,
2973                            WM8996_AIF1RX_CHAN5_SLOTS_MASK |
2974                            WM8996_AIF1RX_CHAN0_START_SLOT_MASK,
2975                            1 << WM8996_AIF1RX_CHAN5_SLOTS_SHIFT | 1);
2976
2977         regmap_update_bits(wm8996->regmap,
2978                            WM8996_AIF2RX_CHANNEL_0_CONFIGURATION,
2979                            WM8996_AIF2RX_CHAN0_SLOTS_MASK |
2980                            WM8996_AIF2RX_CHAN0_START_SLOT_MASK,
2981                            1 << WM8996_AIF2RX_CHAN0_SLOTS_SHIFT | 0);
2982         regmap_update_bits(wm8996->regmap,
2983                            WM8996_AIF2RX_CHANNEL_1_CONFIGURATION,
2984                            WM8996_AIF2RX_CHAN1_SLOTS_MASK |
2985                            WM8996_AIF2RX_CHAN1_START_SLOT_MASK,
2986                            1 << WM8996_AIF2RX_CHAN1_SLOTS_SHIFT | 1);
2987
2988         regmap_update_bits(wm8996->regmap,
2989                            WM8996_AIF1TX_CHANNEL_0_CONFIGURATION,
2990                            WM8996_AIF1TX_CHAN0_SLOTS_MASK |
2991                            WM8996_AIF1TX_CHAN0_START_SLOT_MASK,
2992                            1 << WM8996_AIF1TX_CHAN0_SLOTS_SHIFT | 0);
2993         regmap_update_bits(wm8996->regmap,
2994                            WM8996_AIF1TX_CHANNEL_1_CONFIGURATION,
2995                            WM8996_AIF1TX_CHAN1_SLOTS_MASK |
2996                            WM8996_AIF1TX_CHAN0_START_SLOT_MASK,
2997                            1 << WM8996_AIF1TX_CHAN1_SLOTS_SHIFT | 1);
2998         regmap_update_bits(wm8996->regmap,
2999                            WM8996_AIF1TX_CHANNEL_2_CONFIGURATION,
3000                            WM8996_AIF1TX_CHAN2_SLOTS_MASK |
3001                            WM8996_AIF1TX_CHAN0_START_SLOT_MASK,
3002                            1 << WM8996_AIF1TX_CHAN2_SLOTS_SHIFT | 0);
3003         regmap_update_bits(wm8996->regmap,
3004                            WM8996_AIF1TX_CHANNEL_3_CONFIGURATION,
3005                            WM8996_AIF1TX_CHAN3_SLOTS_MASK |
3006                            WM8996_AIF1TX_CHAN0_START_SLOT_MASK,
3007                            1 << WM8996_AIF1TX_CHAN3_SLOTS_SHIFT | 1);
3008         regmap_update_bits(wm8996->regmap,
3009                            WM8996_AIF1TX_CHANNEL_4_CONFIGURATION,
3010                            WM8996_AIF1TX_CHAN4_SLOTS_MASK |
3011                            WM8996_AIF1TX_CHAN0_START_SLOT_MASK,
3012                            1 << WM8996_AIF1TX_CHAN4_SLOTS_SHIFT | 0);
3013         regmap_update_bits(wm8996->regmap,
3014                            WM8996_AIF1TX_CHANNEL_5_CONFIGURATION,
3015                            WM8996_AIF1TX_CHAN5_SLOTS_MASK |
3016                            WM8996_AIF1TX_CHAN0_START_SLOT_MASK,
3017                            1 << WM8996_AIF1TX_CHAN5_SLOTS_SHIFT | 1);
3018
3019         regmap_update_bits(wm8996->regmap,
3020                            WM8996_AIF2TX_CHANNEL_0_CONFIGURATION,
3021                            WM8996_AIF2TX_CHAN0_SLOTS_MASK |
3022                            WM8996_AIF2TX_CHAN0_START_SLOT_MASK,
3023                            1 << WM8996_AIF2TX_CHAN0_SLOTS_SHIFT | 0);
3024         regmap_update_bits(wm8996->regmap,
3025                            WM8996_AIF1TX_CHANNEL_1_CONFIGURATION,
3026                            WM8996_AIF2TX_CHAN1_SLOTS_MASK |
3027                            WM8996_AIF2TX_CHAN1_START_SLOT_MASK,
3028                            1 << WM8996_AIF1TX_CHAN1_SLOTS_SHIFT | 1);
3029
3030         /* If the TX LRCLK pins are not in LRCLK mode configure the
3031          * AIFs to source their clocks from the RX LRCLKs.
3032          */
3033         ret = regmap_read(wm8996->regmap, WM8996_GPIO_1, &reg);
3034         if (ret != 0) {
3035                 dev_err(&i2c->dev, "Failed to read GPIO1: %d\n", ret);
3036                 goto err_regmap;
3037         }
3038
3039         if (reg & WM8996_GP1_FN_MASK)
3040                 regmap_update_bits(wm8996->regmap, WM8996_AIF1_TX_LRCLK_2,
3041                                    WM8996_AIF1TX_LRCLK_MODE,
3042                                    WM8996_AIF1TX_LRCLK_MODE);
3043
3044         ret = regmap_read(wm8996->regmap, WM8996_GPIO_2, &reg);
3045         if (ret != 0) {
3046                 dev_err(&i2c->dev, "Failed to read GPIO2: %d\n", ret);
3047                 goto err_regmap;
3048         }
3049
3050         if (reg & WM8996_GP2_FN_MASK)
3051                 regmap_update_bits(wm8996->regmap, WM8996_AIF2_TX_LRCLK_2,
3052                                    WM8996_AIF2TX_LRCLK_MODE,
3053                                    WM8996_AIF2TX_LRCLK_MODE);
3054
3055         wm8996_init_gpio(wm8996);
3056
3057         ret = snd_soc_register_codec(&i2c->dev,
3058                                      &soc_codec_dev_wm8996, wm8996_dai,
3059                                      ARRAY_SIZE(wm8996_dai));
3060         if (ret < 0)
3061                 goto err_gpiolib;
3062
3063         return ret;
3064
3065 err_gpiolib:
3066         wm8996_free_gpio(wm8996);
3067 err_regmap:
3068 err_enable:
3069         if (wm8996->pdata.ldo_ena > 0)
3070                 gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 0);
3071         regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
3072 err_gpio:
3073         if (wm8996->pdata.ldo_ena > 0)
3074                 gpio_free(wm8996->pdata.ldo_ena);
3075 err:
3076
3077         return ret;
3078 }
3079
3080 static int wm8996_i2c_remove(struct i2c_client *client)
3081 {
3082         struct wm8996_priv *wm8996 = i2c_get_clientdata(client);
3083         int i;
3084
3085         snd_soc_unregister_codec(&client->dev);
3086         wm8996_free_gpio(wm8996);
3087         if (wm8996->pdata.ldo_ena > 0) {
3088                 gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 0);
3089                 gpio_free(wm8996->pdata.ldo_ena);
3090         }
3091         for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++)
3092                 regulator_unregister_notifier(wm8996->supplies[i].consumer,
3093                                               &wm8996->disable_nb[i]);
3094
3095         return 0;
3096 }
3097
3098 static const struct i2c_device_id wm8996_i2c_id[] = {
3099         { "wm8996", 0 },
3100         { }
3101 };
3102 MODULE_DEVICE_TABLE(i2c, wm8996_i2c_id);
3103
3104 static struct i2c_driver wm8996_i2c_driver = {
3105         .driver = {
3106                 .name = "wm8996",
3107                 .owner = THIS_MODULE,
3108         },
3109         .probe =    wm8996_i2c_probe,
3110         .remove =   wm8996_i2c_remove,
3111         .id_table = wm8996_i2c_id,
3112 };
3113
3114 module_i2c_driver(wm8996_i2c_driver);
3115
3116 MODULE_DESCRIPTION("ASoC WM8996 driver");
3117 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
3118 MODULE_LICENSE("GPL");