drivers/net/wireless/rt2x00/rt61pci.c

   1 /*
   2         Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
   3         <http://rt2x00.serialmonkey.com>
   4
   5         This program is free software; you can redistribute it and/or modify
   6         it under the terms of the GNU General Public License as published by
   7         the Free Software Foundation; either version 2 of the License, or
   8         (at your option) any later version.
   9
  10         This program is distributed in the hope that it will be useful,
  11         but WITHOUT ANY WARRANTY; without even the implied warranty of
  12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13         GNU General Public License for more details.
  14
  15         You should have received a copy of the GNU General Public License
  16         along with this program; if not, write to the
  17         Free Software Foundation, Inc.,
  18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  19  */
  20
  21 /*
  22         Module: rt61pci
  23         Abstract: rt61pci device specific routines.
  24         Supported chipsets: RT2561, RT2561s, RT2661.
  25  */
  26
  27 #include <linux/crc-itu-t.h>
  28 #include <linux/delay.h>
  29 #include <linux/etherdevice.h>
  30 #include <linux/init.h>
  31 #include <linux/kernel.h>
  32 #include <linux/module.h>
  33 #include <linux/pci.h>
  34 #include <linux/eeprom_93cx6.h>
  35
  36 #include "rt2x00.h"
  37 #include "rt2x00pci.h"
  38 #include "rt61pci.h"
  39
  40 /*
  41  * Allow hardware encryption to be disabled.
  42  */
  43 static int modparam_nohwcrypt = 0;
  44 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
  45 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
  46
  47 /*
  48  * Register access.
  49  * BBP and RF register require indirect register access,
  50  * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this.
  51  * These indirect registers work with busy bits,
  52  * and we will try maximal REGISTER_BUSY_COUNT times to access
  53  * the register while taking a REGISTER_BUSY_DELAY us delay
  54  * between each attampt. When the busy bit is still set at that time,
  55  * the access attempt is considered to have failed,
  56  * and we will print an error.
  57  */
  58 #define WAIT_FOR_BBP(__dev, __reg) \
  59         rt2x00pci_regbusy_read((__dev), PHY_CSR3, PHY_CSR3_BUSY, (__reg))
  60 #define WAIT_FOR_RF(__dev, __reg) \
  61         rt2x00pci_regbusy_read((__dev), PHY_CSR4, PHY_CSR4_BUSY, (__reg))
  62 #define WAIT_FOR_MCU(__dev, __reg) \
  63         rt2x00pci_regbusy_read((__dev), H2M_MAILBOX_CSR, \
  64                                H2M_MAILBOX_CSR_OWNER, (__reg))
  65
  66 static void rt61pci_bbp_write(struct rt2x00_dev *rt2x00dev,
  67                               const unsigned int word, const u8 value)
  68 {
  69         u32 reg;
  70
  71         mutex_lock(&rt2x00dev->csr_mutex);
  72
  73         /*
  74          * Wait until the BBP becomes available, afterwards we
  75          * can safely write the new data into the register.
  76          */
  77         if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
  78                 reg = 0;
  79                 rt2x00_set_field32(&reg, PHY_CSR3_VALUE, value);
  80                 rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
  81                 rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
  82                 rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 0);
  83
  84                 rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg);
  85         }
  86
  87         mutex_unlock(&rt2x00dev->csr_mutex);
  88 }
  89
  90 static void rt61pci_bbp_read(struct rt2x00_dev *rt2x00dev,
  91                              const unsigned int word, u8 *value)
  92 {
  93         u32 reg;
  94
  95         mutex_lock(&rt2x00dev->csr_mutex);
  96
  97         /*
  98          * Wait until the BBP becomes available, afterwards we
  99          * can safely write the read request into the register.
 100          * After the data has been written, we wait until hardware
 101          * returns the correct value, if at any time the register
 102          * doesn't become available in time, reg will be 0xffffffff
 103          * which means we return 0xff to the caller.
 104          */
 105         if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
 106                 reg = 0;
 107                 rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
 108                 rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
 109                 rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 1);
 110
 111                 rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg);
 112
 113                 WAIT_FOR_BBP(rt2x00dev, &reg);
 114         }
 115
 116         *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
 117
 118         mutex_unlock(&rt2x00dev->csr_mutex);
 119 }
 120
 121 static void rt61pci_rf_write(struct rt2x00_dev *rt2x00dev,
 122                              const unsigned int word, const u32 value)
 123 {
 124         u32 reg;
 125
 126         mutex_lock(&rt2x00dev->csr_mutex);
 127
 128         /*
 129          * Wait until the RF becomes available, afterwards we
 130          * can safely write the new data into the register.
 131          */
 132         if (WAIT_FOR_RF(rt2x00dev, &reg)) {
 133                 reg = 0;
 134                 rt2x00_set_field32(&reg, PHY_CSR4_VALUE, value);
 135                 rt2x00_set_field32(&reg, PHY_CSR4_NUMBER_OF_BITS, 21);
 136                 rt2x00_set_field32(&reg, PHY_CSR4_IF_SELECT, 0);
 137                 rt2x00_set_field32(&reg, PHY_CSR4_BUSY, 1);
 138
 139                 rt2x00pci_register_write(rt2x00dev, PHY_CSR4, reg);
 140                 rt2x00_rf_write(rt2x00dev, word, value);
 141         }
 142
 143         mutex_unlock(&rt2x00dev->csr_mutex);
 144 }
 145
 146 static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev,
 147                                 const u8 command, const u8 token,
 148                                 const u8 arg0, const u8 arg1)
 149 {
 150         u32 reg;
 151
 152         mutex_lock(&rt2x00dev->csr_mutex);
 153
 154         /*
 155          * Wait until the MCU becomes available, afterwards we
 156          * can safely write the new data into the register.
 157          */
 158         if (WAIT_FOR_MCU(rt2x00dev, &reg)) {
 159                 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
 160                 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
 161                 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
 162                 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
 163                 rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg);
 164
 165                 rt2x00pci_register_read(rt2x00dev, HOST_CMD_CSR, &reg);
 166                 rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
 167                 rt2x00_set_field32(&reg, HOST_CMD_CSR_INTERRUPT_MCU, 1);
 168                 rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg);
 169         }
 170
 171         mutex_unlock(&rt2x00dev->csr_mutex);
 172
 173 }
 174
 175 static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
 176 {
 177         struct rt2x00_dev *rt2x00dev = eeprom->data;
 178         u32 reg;
 179
 180         rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, &reg);
 181
 182         eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN);
 183         eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT);
 184         eeprom->reg_data_clock =
 185             !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK);
 186         eeprom->reg_chip_select =
 187             !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT);
 188 }
 189
 190 static void rt61pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
 191 {
 192         struct rt2x00_dev *rt2x00dev = eeprom->data;
 193         u32 reg = 0;
 194
 195         rt2x00_set_field32(&reg, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in);
 196         rt2x00_set_field32(&reg, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out);
 197         rt2x00_set_field32(&reg, E2PROM_CSR_DATA_CLOCK,
 198                            !!eeprom->reg_data_clock);
 199         rt2x00_set_field32(&reg, E2PROM_CSR_CHIP_SELECT,
 200                            !!eeprom->reg_chip_select);
 201
 202         rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg);
 203 }
 204
 205 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 206 static const struct rt2x00debug rt61pci_rt2x00debug = {
 207         .owner  = THIS_MODULE,
 208         .csr    = {
 209                 .read           = rt2x00pci_register_read,
 210                 .write          = rt2x00pci_register_write,
 211                 .flags          = RT2X00DEBUGFS_OFFSET,
 212                 .word_base      = CSR_REG_BASE,
 213                 .word_size      = sizeof(u32),
 214                 .word_count     = CSR_REG_SIZE / sizeof(u32),
 215         },
 216         .eeprom = {
 217                 .read           = rt2x00_eeprom_read,
 218                 .write          = rt2x00_eeprom_write,
 219                 .word_base      = EEPROM_BASE,
 220                 .word_size      = sizeof(u16),
 221                 .word_count     = EEPROM_SIZE / sizeof(u16),
 222         },
 223         .bbp    = {
 224                 .read           = rt61pci_bbp_read,
 225                 .write          = rt61pci_bbp_write,
 226                 .word_base      = BBP_BASE,
 227                 .word_size      = sizeof(u8),
 228                 .word_count     = BBP_SIZE / sizeof(u8),
 229         },
 230         .rf     = {
 231                 .read           = rt2x00_rf_read,
 232                 .write          = rt61pci_rf_write,
 233                 .word_base      = RF_BASE,
 234                 .word_size      = sizeof(u32),
 235                 .word_count     = RF_SIZE / sizeof(u32),
 236         },
 237 };
 238 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 239
 240 static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 241 {
 242         u32 reg;
 243
 244         rt2x00pci_register_read(rt2x00dev, MAC_CSR13, &reg);
 245         return rt2x00_get_field32(reg, MAC_CSR13_BIT5);
 246 }
 247
 248 #ifdef CONFIG_RT2X00_LIB_LEDS
 249 static void rt61pci_brightness_set(struct led_classdev *led_cdev,
 250                                    enum led_brightness brightness)
 251 {
 252         struct rt2x00_led *led =
 253             container_of(led_cdev, struct rt2x00_led, led_dev);
 254         unsigned int enabled = brightness != LED_OFF;
 255         unsigned int a_mode =
 256             (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
 257         unsigned int bg_mode =
 258             (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
 259
 260         if (led->type == LED_TYPE_RADIO) {
 261                 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
 262                                    MCU_LEDCS_RADIO_STATUS, enabled);
 263
 264                 rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff,
 265                                     (led->rt2x00dev->led_mcu_reg & 0xff),
 266                                     ((led->rt2x00dev->led_mcu_reg >> 8)));
 267         } else if (led->type == LED_TYPE_ASSOC) {
 268                 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
 269                                    MCU_LEDCS_LINK_BG_STATUS, bg_mode);
 270                 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
 271                                    MCU_LEDCS_LINK_A_STATUS, a_mode);
 272
 273                 rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff,
 274                                     (led->rt2x00dev->led_mcu_reg & 0xff),
 275                                     ((led->rt2x00dev->led_mcu_reg >> 8)));
 276         } else if (led->type == LED_TYPE_QUALITY) {
 277                 /*
 278                  * The brightness is divided into 6 levels (0 - 5),
 279                  * this means we need to convert the brightness
 280                  * argument into the matching level within that range.
 281                  */
 282                 rt61pci_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
 283                                     brightness / (LED_FULL / 6), 0);
 284         }
 285 }
 286
 287 static int rt61pci_blink_set(struct led_classdev *led_cdev,
 288                              unsigned long *delay_on,
 289                              unsigned long *delay_off)
 290 {
 291         struct rt2x00_led *led =
 292             container_of(led_cdev, struct rt2x00_led, led_dev);
 293         u32 reg;
 294
 295         rt2x00pci_register_read(led->rt2x00dev, MAC_CSR14, &reg);
 296         rt2x00_set_field32(&reg, MAC_CSR14_ON_PERIOD, *delay_on);
 297         rt2x00_set_field32(&reg, MAC_CSR14_OFF_PERIOD, *delay_off);
 298         rt2x00pci_register_write(led->rt2x00dev, MAC_CSR14, reg);
 299
 300         return 0;
 301 }
 302
 303 static void rt61pci_init_led(struct rt2x00_dev *rt2x00dev,
 304                              struct rt2x00_led *led,
 305                              enum led_type type)
 306 {
 307         led->rt2x00dev = rt2x00dev;
 308         led->type = type;
 309         led->led_dev.brightness_set = rt61pci_brightness_set;
 310         led->led_dev.blink_set = rt61pci_blink_set;
 311         led->flags = LED_INITIALIZED;
 312 }
 313 #endif /* CONFIG_RT2X00_LIB_LEDS */
 314
 315 /*
 316  * Configuration handlers.
 317  */
 318 static int rt61pci_config_shared_key(struct rt2x00_dev *rt2x00dev,
 319                                      struct rt2x00lib_crypto *crypto,
 320                                      struct ieee80211_key_conf *key)
 321 {
 322         struct hw_key_entry key_entry;
 323         struct rt2x00_field32 field;
 324         u32 mask;
 325         u32 reg;
 326
 327         if (crypto->cmd == SET_KEY) {
 328                 /*
 329                  * rt2x00lib can't determine the correct free
 330                  * key_idx for shared keys. We have 1 register
 331                  * with key valid bits. The goal is simple, read
 332                  * the register, if that is full we have no slots
 333                  * left.
 334                  * Note that each BSS is allowed to have up to 4
 335                  * shared keys, so put a mask over the allowed
 336                  * entries.
 337                  */
 338                 mask = (0xf << crypto->bssidx);
 339
 340                 rt2x00pci_register_read(rt2x00dev, SEC_CSR0, &reg);
 341                 reg &= mask;
 342
 343                 if (reg && reg == mask)
 344                         return -ENOSPC;
 345
 346                 key->hw_key_idx += reg ? ffz(reg) : 0;
 347
 348                 /*
 349                  * Upload key to hardware
 350                  */
 351                 memcpy(key_entry.key, crypto->key,
 352                        sizeof(key_entry.key));
 353                 memcpy(key_entry.tx_mic, crypto->tx_mic,
 354                        sizeof(key_entry.tx_mic));
 355                 memcpy(key_entry.rx_mic, crypto->rx_mic,
 356                        sizeof(key_entry.rx_mic));
 357
 358                 reg = SHARED_KEY_ENTRY(key->hw_key_idx);
 359                 rt2x00pci_register_multiwrite(rt2x00dev, reg,
 360                                               &key_entry, sizeof(key_entry));
 361
 362                 /*
 363                  * The cipher types are stored over 2 registers.
 364                  * bssidx 0 and 1 keys are stored in SEC_CSR1 and
 365                  * bssidx 1 and 2 keys are stored in SEC_CSR5.
 366                  * Using the correct defines correctly will cause overhead,
 367                  * so just calculate the correct offset.
 368                  */
 369                 if (key->hw_key_idx < 8) {
 370                         field.bit_offset = (3 * key->hw_key_idx);
 371                         field.bit_mask = 0x7 << field.bit_offset;
 372
 373                         rt2x00pci_register_read(rt2x00dev, SEC_CSR1, &reg);
 374                         rt2x00_set_field32(&reg, field, crypto->cipher);
 375                         rt2x00pci_register_write(rt2x00dev, SEC_CSR1, reg);
 376                 } else {
 377                         field.bit_offset = (3 * (key->hw_key_idx - 8));
 378                         field.bit_mask = 0x7 << field.bit_offset;
 379
 380                         rt2x00pci_register_read(rt2x00dev, SEC_CSR5, &reg);
 381                         rt2x00_set_field32(&reg, field, crypto->cipher);
 382                         rt2x00pci_register_write(rt2x00dev, SEC_CSR5, reg);
 383                 }
 384
 385                 /*
 386                  * The driver does not support the IV/EIV generation
 387                  * in hardware. However it doesn't support the IV/EIV
 388                  * inside the ieee80211 frame either, but requires it
 389                  * to be provided seperately for the descriptor.
 390                  * rt2x00lib will cut the IV/EIV data out of all frames
 391                  * given to us by mac80211, but we must tell mac80211
 392                  * to generate the IV/EIV data.
 393                  */
 394                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 395         }
 396
 397         /*
 398          * SEC_CSR0 contains only single-bit fields to indicate
 399          * a particular key is valid. Because using the FIELD32()
 400          * defines directly will cause a lot of overhead we use
 401          * a calculation to determine the correct bit directly.
 402          */
 403         mask = 1 << key->hw_key_idx;
 404
 405         rt2x00pci_register_read(rt2x00dev, SEC_CSR0, &reg);
 406         if (crypto->cmd == SET_KEY)
 407                 reg |= mask;
 408         else if (crypto->cmd == DISABLE_KEY)
 409                 reg &= ~mask;
 410         rt2x00pci_register_write(rt2x00dev, SEC_CSR0, reg);
 411
 412         return 0;
 413 }
 414
 415 static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
 416                                        struct rt2x00lib_crypto *crypto,
 417                                        struct ieee80211_key_conf *key)
 418 {
 419         struct hw_pairwise_ta_entry addr_entry;
 420         struct hw_key_entry key_entry;
 421         u32 mask;
 422         u32 reg;
 423
 424         if (crypto->cmd == SET_KEY) {
 425                 /*
 426                  * rt2x00lib can't determine the correct free
 427                  * key_idx for pairwise keys. We have 2 registers
 428                  * with key valid bits. The goal is simple, read
 429                  * the first register, if that is full move to
 430                  * the next register.
 431                  * When both registers are full, we drop the key,
 432                  * otherwise we use the first invalid entry.
 433                  */
 434                 rt2x00pci_register_read(rt2x00dev, SEC_CSR2, &reg);
 435                 if (reg && reg == ~0) {
 436                         key->hw_key_idx = 32;
 437                         rt2x00pci_register_read(rt2x00dev, SEC_CSR3, &reg);
 438                         if (reg && reg == ~0)
 439                                 return -ENOSPC;
 440                 }
 441
 442                 key->hw_key_idx += reg ? ffz(reg) : 0;
 443
 444                 /*
 445                  * Upload key to hardware
 446                  */
 447                 memcpy(key_entry.key, crypto->key,
 448                        sizeof(key_entry.key));
 449                 memcpy(key_entry.tx_mic, crypto->tx_mic,
 450                        sizeof(key_entry.tx_mic));
 451                 memcpy(key_entry.rx_mic, crypto->rx_mic,
 452                        sizeof(key_entry.rx_mic));
 453
 454                 memset(&addr_entry, 0, sizeof(addr_entry));
 455                 memcpy(&addr_entry, crypto->address, ETH_ALEN);
 456                 addr_entry.cipher = crypto->cipher;
 457
 458                 reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
 459                 rt2x00pci_register_multiwrite(rt2x00dev, reg,
 460                                               &key_entry, sizeof(key_entry));
 461
 462                 reg = PAIRWISE_TA_ENTRY(key->hw_key_idx);
 463                 rt2x00pci_register_multiwrite(rt2x00dev, reg,
 464                                               &addr_entry, sizeof(addr_entry));
 465
 466                 /*
 467                  * Enable pairwise lookup table for given BSS idx,
 468                  * without this received frames will not be decrypted
 469                  * by the hardware.
 470                  */
 471                 rt2x00pci_register_read(rt2x00dev, SEC_CSR4, &reg);
 472                 reg |= (1 << crypto->bssidx);
 473                 rt2x00pci_register_write(rt2x00dev, SEC_CSR4, reg);
 474
 475                 /*
 476                  * The driver does not support the IV/EIV generation
 477                  * in hardware. However it doesn't support the IV/EIV
 478                  * inside the ieee80211 frame either, but requires it
 479                  * to be provided seperately for the descriptor.
 480                  * rt2x00lib will cut the IV/EIV data out of all frames
 481                  * given to us by mac80211, but we must tell mac80211
 482                  * to generate the IV/EIV data.
 483                  */
 484                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 485         }
 486
 487         /*
 488          * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate
 489          * a particular key is valid. Because using the FIELD32()
 490          * defines directly will cause a lot of overhead we use
 491          * a calculation to determine the correct bit directly.
 492          */
 493         if (key->hw_key_idx < 32) {
 494                 mask = 1 << key->hw_key_idx;
 495
 496                 rt2x00pci_register_read(rt2x00dev, SEC_CSR2, &reg);
 497                 if (crypto->cmd == SET_KEY)
 498                         reg |= mask;
 499                 else if (crypto->cmd == DISABLE_KEY)
 500                         reg &= ~mask;
 501                 rt2x00pci_register_write(rt2x00dev, SEC_CSR2, reg);
 502         } else {
 503                 mask = 1 << (key->hw_key_idx - 32);
 504
 505                 rt2x00pci_register_read(rt2x00dev, SEC_CSR3, &reg);
 506                 if (crypto->cmd == SET_KEY)
 507                         reg |= mask;
 508                 else if (crypto->cmd == DISABLE_KEY)
 509                         reg &= ~mask;
 510                 rt2x00pci_register_write(rt2x00dev, SEC_CSR3, reg);
 511         }
 512
 513         return 0;
 514 }
 515
 516 static void rt61pci_config_filter(struct rt2x00_dev *rt2x00dev,
 517                                   const unsigned int filter_flags)
 518 {
 519         u32 reg;
 520
 521         /*
 522          * Start configuration steps.
 523          * Note that the version error will always be dropped
 524          * and broadcast frames will always be accepted since
 525          * there is no filter for it at this time.
 526          */
 527         rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
 528         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CRC,
 529                            !(filter_flags & FIF_FCSFAIL));
 530         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_PHYSICAL,
 531                            !(filter_flags & FIF_PLCPFAIL));
 532         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL,
 533                            !(filter_flags & (FIF_CONTROL | FIF_PSPOLL)));
 534         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME,
 535                            !(filter_flags & FIF_PROMISC_IN_BSS));
 536         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS,
 537                            !(filter_flags & FIF_PROMISC_IN_BSS) &&
 538                            !rt2x00dev->intf_ap_count);
 539         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 1);
 540         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_MULTICAST,
 541                            !(filter_flags & FIF_ALLMULTI));
 542         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_BROADCAST, 0);
 543         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_ACK_CTS,
 544                            !(filter_flags & FIF_CONTROL));
 545         rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
 546 }
 547
 548 static void rt61pci_config_intf(struct rt2x00_dev *rt2x00dev,
 549                                 struct rt2x00_intf *intf,
 550                                 struct rt2x00intf_conf *conf,
 551                                 const unsigned int flags)
 552 {
 553         unsigned int beacon_base;
 554         u32 reg;
 555
 556         if (flags & CONFIG_UPDATE_TYPE) {
 557                 /*
 558                  * Clear current synchronisation setup.
 559                  * For the Beacon base registers we only need to clear
 560                  * the first byte since that byte contains the VALID and OWNER
 561                  * bits which (when set to 0) will invalidate the entire beacon.
 562                  */
 563                 beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
 564                 rt2x00pci_register_write(rt2x00dev, beacon_base, 0);
 565
 566                 /*
 567                  * Enable synchronisation.
 568                  */
 569                 rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
 570                 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
 571                 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, conf->sync);
 572                 rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
 573                 rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
 574         }
 575
 576         if (flags & CONFIG_UPDATE_MAC) {
 577                 reg = le32_to_cpu(conf->mac[1]);
 578                 rt2x00_set_field32(&reg, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff);
 579                 conf->mac[1] = cpu_to_le32(reg);
 580
 581                 rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2,
 582                                               conf->mac, sizeof(conf->mac));
 583         }
 584
 585         if (flags & CONFIG_UPDATE_BSSID) {
 586                 reg = le32_to_cpu(conf->bssid[1]);
 587                 rt2x00_set_field32(&reg, MAC_CSR5_BSS_ID_MASK, 3);
 588                 conf->bssid[1] = cpu_to_le32(reg);
 589
 590                 rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4,
 591                                               conf->bssid, sizeof(conf->bssid));
 592         }
 593 }
 594
 595 static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev,
 596                                struct rt2x00lib_erp *erp)
 597 {
 598         u32 reg;
 599
 600         rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
 601         rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout);
 602         rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
 603         rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
 604
 605         rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
 606         rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
 607         rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE,
 608                            !!erp->short_preamble);
 609         rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
 610
 611         rt2x00pci_register_write(rt2x00dev, TXRX_CSR5, erp->basic_rates);
 612
 613         rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
 614         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL,
 615                            erp->beacon_int * 16);
 616         rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
 617
 618         rt2x00pci_register_read(rt2x00dev, MAC_CSR9, &reg);
 619         rt2x00_set_field32(&reg, MAC_CSR9_SLOT_TIME, erp->slot_time);
 620         rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg);
 621
 622         rt2x00pci_register_read(rt2x00dev, MAC_CSR8, &reg);
 623         rt2x00_set_field32(&reg, MAC_CSR8_SIFS, erp->sifs);
 624         rt2x00_set_field32(&reg, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3);
 625         rt2x00_set_field32(&reg, MAC_CSR8_EIFS, erp->eifs);
 626         rt2x00pci_register_write(rt2x00dev, MAC_CSR8, reg);
 627 }
 628
 629 static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
 630                                       struct antenna_setup *ant)
 631 {
 632         u8 r3;
 633         u8 r4;
 634         u8 r77;
 635
 636         rt61pci_bbp_read(rt2x00dev, 3, &r3);
 637         rt61pci_bbp_read(rt2x00dev, 4, &r4);
 638         rt61pci_bbp_read(rt2x00dev, 77, &r77);
 639
 640         rt2x00_set_field8(&r3, BBP_R3_SMART_MODE,
 641                           rt2x00_rf(&rt2x00dev->chip, RF5325));
 642
 643         /*
 644          * Configure the RX antenna.
 645          */
 646         switch (ant->rx) {
 647         case ANTENNA_HW_DIVERSITY:
 648                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
 649                 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
 650                                   (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ));
 651                 break;
 652         case ANTENNA_A:
 653                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 654                 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
 655                 if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
 656                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 657                 else
 658                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 659                 break;
 660         case ANTENNA_B:
 661         default:
 662                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 663                 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
 664                 if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
 665                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 666                 else
 667                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 668                 break;
 669         }
 670
 671         rt61pci_bbp_write(rt2x00dev, 77, r77);
 672         rt61pci_bbp_write(rt2x00dev, 3, r3);
 673         rt61pci_bbp_write(rt2x00dev, 4, r4);
 674 }
 675
 676 static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
 677                                       struct antenna_setup *ant)
 678 {
 679         u8 r3;
 680         u8 r4;
 681         u8 r77;
 682
 683         rt61pci_bbp_read(rt2x00dev, 3, &r3);
 684         rt61pci_bbp_read(rt2x00dev, 4, &r4);
 685         rt61pci_bbp_read(rt2x00dev, 77, &r77);
 686
 687         rt2x00_set_field8(&r3, BBP_R3_SMART_MODE,
 688                           rt2x00_rf(&rt2x00dev->chip, RF2529));
 689         rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
 690                           !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags));
 691
 692         /*
 693          * Configure the RX antenna.
 694          */
 695         switch (ant->rx) {
 696         case ANTENNA_HW_DIVERSITY:
 697                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
 698                 break;
 699         case ANTENNA_A:
 700                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 701                 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 702                 break;
 703         case ANTENNA_B:
 704         default:
 705                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 706                 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 707                 break;
 708         }
 709
 710         rt61pci_bbp_write(rt2x00dev, 77, r77);
 711         rt61pci_bbp_write(rt2x00dev, 3, r3);
 712         rt61pci_bbp_write(rt2x00dev, 4, r4);
 713 }
 714
 715 static void rt61pci_config_antenna_2529_rx(struct rt2x00_dev *rt2x00dev,
 716                                            const int p1, const int p2)
 717 {
 718         u32 reg;
 719
 720         rt2x00pci_register_read(rt2x00dev, MAC_CSR13, &reg);
 721
 722         rt2x00_set_field32(&reg, MAC_CSR13_BIT4, p1);
 723         rt2x00_set_field32(&reg, MAC_CSR13_BIT12, 0);
 724
 725         rt2x00_set_field32(&reg, MAC_CSR13_BIT3, !p2);
 726         rt2x00_set_field32(&reg, MAC_CSR13_BIT11, 0);
 727
 728         rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg);
 729 }
 730
 731 static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev,
 732                                         struct antenna_setup *ant)
 733 {
 734         u8 r3;
 735         u8 r4;
 736         u8 r77;
 737
 738         rt61pci_bbp_read(rt2x00dev, 3, &r3);
 739         rt61pci_bbp_read(rt2x00dev, 4, &r4);
 740         rt61pci_bbp_read(rt2x00dev, 77, &r77);
 741
 742         /*
 743          * Configure the RX antenna.
 744          */
 745         switch (ant->rx) {
 746         case ANTENNA_A:
 747                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 748                 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 749                 rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0);
 750                 break;
 751         case ANTENNA_HW_DIVERSITY:
 752                 /*
 753                  * FIXME: Antenna selection for the rf 2529 is very confusing
 754                  * in the legacy driver. Just default to antenna B until the
 755                  * legacy code can be properly translated into rt2x00 code.
 756                  */
 757         case ANTENNA_B:
 758         default:
 759                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 760                 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 761                 rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1);
 762                 break;
 763         }
 764
 765         rt61pci_bbp_write(rt2x00dev, 77, r77);
 766         rt61pci_bbp_write(rt2x00dev, 3, r3);
 767         rt61pci_bbp_write(rt2x00dev, 4, r4);
 768 }
 769
 770 struct antenna_sel {
 771         u8 word;
 772         /*
 773          * value[0] -> non-LNA
 774          * value[1] -> LNA
 775          */
 776         u8 value[2];
 777 };
 778
 779 static const struct antenna_sel antenna_sel_a[] = {
 780         { 96,  { 0x58, 0x78 } },
 781         { 104, { 0x38, 0x48 } },
 782         { 75,  { 0xfe, 0x80 } },
 783         { 86,  { 0xfe, 0x80 } },
 784         { 88,  { 0xfe, 0x80 } },
 785         { 35,  { 0x60, 0x60 } },
 786         { 97,  { 0x58, 0x58 } },
 787         { 98,  { 0x58, 0x58 } },
 788 };
 789
 790 static const struct antenna_sel antenna_sel_bg[] = {
 791         { 96,  { 0x48, 0x68 } },
 792         { 104, { 0x2c, 0x3c } },
 793         { 75,  { 0xfe, 0x80 } },
 794         { 86,  { 0xfe, 0x80 } },
 795         { 88,  { 0xfe, 0x80 } },
 796         { 35,  { 0x50, 0x50 } },
 797         { 97,  { 0x48, 0x48 } },
 798         { 98,  { 0x48, 0x48 } },
 799 };
 800
 801 static void rt61pci_config_ant(struct rt2x00_dev *rt2x00dev,
 802                                struct antenna_setup *ant)
 803 {
 804         const struct antenna_sel *sel;
 805         unsigned int lna;
 806         unsigned int i;
 807         u32 reg;
 808
 809         /*
 810          * We should never come here because rt2x00lib is supposed
 811          * to catch this and send us the correct antenna explicitely.
 812          */
 813         BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
 814                ant->tx == ANTENNA_SW_DIVERSITY);
 815
 816         if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
 817                 sel = antenna_sel_a;
 818                 lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
 819         } else {
 820                 sel = antenna_sel_bg;
 821                 lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
 822         }
 823
 824         for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
 825                 rt61pci_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]);
 826
 827         rt2x00pci_register_read(rt2x00dev, PHY_CSR0, &reg);
 828
 829         rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_BG,
 830                            rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
 831         rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_A,
 832                            rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
 833
 834         rt2x00pci_register_write(rt2x00dev, PHY_CSR0, reg);
 835
 836         if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
 837             rt2x00_rf(&rt2x00dev->chip, RF5325))
 838                 rt61pci_config_antenna_5x(rt2x00dev, ant);
 839         else if (rt2x00_rf(&rt2x00dev->chip, RF2527))
 840                 rt61pci_config_antenna_2x(rt2x00dev, ant);
 841         else if (rt2x00_rf(&rt2x00dev->chip, RF2529)) {
 842                 if (test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags))
 843                         rt61pci_config_antenna_2x(rt2x00dev, ant);
 844                 else
 845                         rt61pci_config_antenna_2529(rt2x00dev, ant);
 846         }
 847 }
 848
 849 static void rt61pci_config_lna_gain(struct rt2x00_dev *rt2x00dev,
 850                                     struct rt2x00lib_conf *libconf)
 851 {
 852         u16 eeprom;
 853         short lna_gain = 0;
 854
 855         if (libconf->conf->channel->band == IEEE80211_BAND_2GHZ) {
 856                 if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
 857                         lna_gain += 14;
 858
 859                 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
 860                 lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
 861         } else {
 862                 if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
 863                         lna_gain += 14;
 864
 865                 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
 866                 lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
 867         }
 868
 869         rt2x00dev->lna_gain = lna_gain;
 870 }
 871
 872 static void rt61pci_config_channel(struct rt2x00_dev *rt2x00dev,
 873                                    struct rf_channel *rf, const int txpower)
 874 {
 875         u8 r3;
 876         u8 r94;
 877         u8 smart;
 878
 879         rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 880         rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
 881
 882         smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) ||
 883                   rt2x00_rf(&rt2x00dev->chip, RF2527));
 884
 885         rt61pci_bbp_read(rt2x00dev, 3, &r3);
 886         rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart);
 887         rt61pci_bbp_write(rt2x00dev, 3, r3);
 888
 889         r94 = 6;
 890         if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94))
 891                 r94 += txpower - MAX_TXPOWER;
 892         else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94))
 893                 r94 += txpower;
 894         rt61pci_bbp_write(rt2x00dev, 94, r94);
 895
 896         rt61pci_rf_write(rt2x00dev, 1, rf->rf1);
 897         rt61pci_rf_write(rt2x00dev, 2, rf->rf2);
 898         rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
 899         rt61pci_rf_write(rt2x00dev, 4, rf->rf4);
 900
 901         udelay(200);
 902
 903         rt61pci_rf_write(rt2x00dev, 1, rf->rf1);
 904         rt61pci_rf_write(rt2x00dev, 2, rf->rf2);
 905         rt61pci_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
 906         rt61pci_rf_write(rt2x00dev, 4, rf->rf4);
 907
 908         udelay(200);
 909
 910         rt61pci_rf_write(rt2x00dev, 1, rf->rf1);
 911         rt61pci_rf_write(rt2x00dev, 2, rf->rf2);
 912         rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
 913         rt61pci_rf_write(rt2x00dev, 4, rf->rf4);
 914
 915         msleep(1);
 916 }
 917
 918 static void rt61pci_config_txpower(struct rt2x00_dev *rt2x00dev,
 919                                    const int txpower)
 920 {
 921         struct rf_channel rf;
 922
 923         rt2x00_rf_read(rt2x00dev, 1, &rf.rf1);
 924         rt2x00_rf_read(rt2x00dev, 2, &rf.rf2);
 925         rt2x00_rf_read(rt2x00dev, 3, &rf.rf3);
 926         rt2x00_rf_read(rt2x00dev, 4, &rf.rf4);
 927
 928         rt61pci_config_channel(rt2x00dev, &rf, txpower);
 929 }
 930
 931 static void rt61pci_config_retry_limit(struct rt2x00_dev *rt2x00dev,
 932                                     struct rt2x00lib_conf *libconf)
 933 {
 934         u32 reg;
 935
 936         rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
 937         rt2x00_set_field32(&reg, TXRX_CSR4_LONG_RETRY_LIMIT,
 938                            libconf->conf->long_frame_max_tx_count);
 939         rt2x00_set_field32(&reg, TXRX_CSR4_SHORT_RETRY_LIMIT,
 940                            libconf->conf->short_frame_max_tx_count);
 941         rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
 942 }
 943
 944 static void rt61pci_config_ps(struct rt2x00_dev *rt2x00dev,
 945                                 struct rt2x00lib_conf *libconf)
 946 {
 947         enum dev_state state =
 948             (libconf->conf->flags & IEEE80211_CONF_PS) ?
 949                 STATE_SLEEP : STATE_AWAKE;
 950         u32 reg;
 951
 952         if (state == STATE_SLEEP) {
 953                 rt2x00pci_register_read(rt2x00dev, MAC_CSR11, &reg);
 954                 rt2x00_set_field32(&reg, MAC_CSR11_DELAY_AFTER_TBCN,
 955                                    rt2x00dev->beacon_int - 10);
 956                 rt2x00_set_field32(&reg, MAC_CSR11_TBCN_BEFORE_WAKEUP,
 957                                    libconf->conf->listen_interval - 1);
 958                 rt2x00_set_field32(&reg, MAC_CSR11_WAKEUP_LATENCY, 5);
 959
 960                 /* We must first disable autowake before it can be enabled */
 961                 rt2x00_set_field32(&reg, MAC_CSR11_AUTOWAKE, 0);
 962                 rt2x00pci_register_write(rt2x00dev, MAC_CSR11, reg);
 963
 964                 rt2x00_set_field32(&reg, MAC_CSR11_AUTOWAKE, 1);
 965                 rt2x00pci_register_write(rt2x00dev, MAC_CSR11, reg);
 966
 967                 rt2x00pci_register_write(rt2x00dev, SOFT_RESET_CSR, 0x00000005);
 968                 rt2x00pci_register_write(rt2x00dev, IO_CNTL_CSR, 0x0000001c);
 969                 rt2x00pci_register_write(rt2x00dev, PCI_USEC_CSR, 0x00000060);
 970
 971                 rt61pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 0);
 972         } else {
 973                 rt2x00pci_register_read(rt2x00dev, MAC_CSR11, &reg);
 974                 rt2x00_set_field32(&reg, MAC_CSR11_DELAY_AFTER_TBCN, 0);
 975                 rt2x00_set_field32(&reg, MAC_CSR11_TBCN_BEFORE_WAKEUP, 0);
 976                 rt2x00_set_field32(&reg, MAC_CSR11_AUTOWAKE, 0);
 977                 rt2x00_set_field32(&reg, MAC_CSR11_WAKEUP_LATENCY, 0);
 978                 rt2x00pci_register_write(rt2x00dev, MAC_CSR11, reg);
 979
 980                 rt2x00pci_register_write(rt2x00dev, SOFT_RESET_CSR, 0x00000007);
 981                 rt2x00pci_register_write(rt2x00dev, IO_CNTL_CSR, 0x00000018);
 982                 rt2x00pci_register_write(rt2x00dev, PCI_USEC_CSR, 0x00000020);
 983
 984                 rt61pci_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
 985         }
 986 }
 987
 988 static void rt61pci_config(struct rt2x00_dev *rt2x00dev,
 989                            struct rt2x00lib_conf *libconf,
 990                            const unsigned int flags)
 991 {
 992         /* Always recalculate LNA gain before changing configuration */
 993         rt61pci_config_lna_gain(rt2x00dev, libconf);
 994
 995         if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
 996                 rt61pci_config_channel(rt2x00dev, &libconf->rf,
 997                                        libconf->conf->power_level);
 998         if ((flags & IEEE80211_CONF_CHANGE_POWER) &&
 999             !(flags & IEEE80211_CONF_CHANGE_CHANNEL))
1000                 rt61pci_config_txpower(rt2x00dev, libconf->conf->power_level);
1001         if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
1002                 rt61pci_config_retry_limit(rt2x00dev, libconf);
1003         if (flags & IEEE80211_CONF_CHANGE_PS)
1004                 rt61pci_config_ps(rt2x00dev, libconf);
1005 }
1006
1007 /*
1008  * Link tuning
1009  */
1010 static void rt61pci_link_stats(struct rt2x00_dev *rt2x00dev,
1011                                struct link_qual *qual)
1012 {
1013         u32 reg;
1014
1015         /*
1016          * Update FCS error count from register.
1017          */
1018         rt2x00pci_register_read(rt2x00dev, STA_CSR0, &reg);
1019         qual->rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR);
1020
1021         /*
1022          * Update False CCA count from register.
1023          */
1024         rt2x00pci_register_read(rt2x00dev, STA_CSR1, &reg);
1025         qual->false_cca = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR);
1026 }
1027
1028 static inline void rt61pci_set_vgc(struct rt2x00_dev *rt2x00dev,
1029                                    struct link_qual *qual, u8 vgc_level)
1030 {
1031         if (qual->vgc_level != vgc_level) {
1032                 rt61pci_bbp_write(rt2x00dev, 17, vgc_level);
1033                 qual->vgc_level = vgc_level;
1034                 qual->vgc_level_reg = vgc_level;
1035         }
1036 }
1037
1038 static void rt61pci_reset_tuner(struct rt2x00_dev *rt2x00dev,
1039                                 struct link_qual *qual)
1040 {
1041         rt61pci_set_vgc(rt2x00dev, qual, 0x20);
1042 }
1043
1044 static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev,
1045                                struct link_qual *qual, const u32 count)
1046 {
1047         u8 up_bound;
1048         u8 low_bound;
1049
1050         /*
1051          * Determine r17 bounds.
1052          */
1053         if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
1054                 low_bound = 0x28;
1055                 up_bound = 0x48;
1056                 if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
1057                         low_bound += 0x10;
1058                         up_bound += 0x10;
1059                 }
1060         } else {
1061                 low_bound = 0x20;
1062                 up_bound = 0x40;
1063                 if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
1064                         low_bound += 0x10;
1065                         up_bound += 0x10;
1066                 }
1067         }
1068
1069         /*
1070          * If we are not associated, we should go straight to the
1071          * dynamic CCA tuning.
1072          */
1073         if (!rt2x00dev->intf_associated)
1074                 goto dynamic_cca_tune;
1075
1076         /*
1077          * Special big-R17 for very short distance
1078          */
1079         if (qual->rssi >= -35) {
1080                 rt61pci_set_vgc(rt2x00dev, qual, 0x60);
1081                 return;
1082         }
1083
1084         /*
1085          * Special big-R17 for short distance
1086          */
1087         if (qual->rssi >= -58) {
1088                 rt61pci_set_vgc(rt2x00dev, qual, up_bound);
1089                 return;
1090         }
1091
1092         /*
1093          * Special big-R17 for middle-short distance
1094          */
1095         if (qual->rssi >= -66) {
1096                 rt61pci_set_vgc(rt2x00dev, qual, low_bound + 0x10);
1097                 return;
1098         }
1099
1100         /*
1101          * Special mid-R17 for middle distance
1102          */
1103         if (qual->rssi >= -74) {
1104                 rt61pci_set_vgc(rt2x00dev, qual, low_bound + 0x08);
1105                 return;
1106         }
1107
1108         /*
1109          * Special case: Change up_bound based on the rssi.
1110          * Lower up_bound when rssi is weaker then -74 dBm.
1111          */
1112         up_bound -= 2 * (-74 - qual->rssi);
1113         if (low_bound > up_bound)
1114                 up_bound = low_bound;
1115
1116         if (qual->vgc_level > up_bound) {
1117                 rt61pci_set_vgc(rt2x00dev, qual, up_bound);
1118                 return;
1119         }
1120
1121 dynamic_cca_tune:
1122
1123         /*
1124          * r17 does not yet exceed upper limit, continue and base
1125          * the r17 tuning on the false CCA count.
1126          */
1127         if ((qual->false_cca > 512) && (qual->vgc_level < up_bound))
1128                 rt61pci_set_vgc(rt2x00dev, qual, ++qual->vgc_level);
1129         else if ((qual->false_cca < 100) && (qual->vgc_level > low_bound))
1130                 rt61pci_set_vgc(rt2x00dev, qual, --qual->vgc_level);
1131 }
1132
1133 /*
1134  * Firmware functions
1135  */
1136 static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
1137 {
1138         char *fw_name;
1139
1140         switch (rt2x00dev->chip.rt) {
1141         case RT2561:
1142                 fw_name = FIRMWARE_RT2561;
1143                 break;
1144         case RT2561s:
1145                 fw_name = FIRMWARE_RT2561s;
1146                 break;
1147         case RT2661:
1148                 fw_name = FIRMWARE_RT2661;
1149                 break;
1150         default:
1151                 fw_name = NULL;
1152                 break;
1153         }
1154
1155         return fw_name;
1156 }
1157
1158 static int rt61pci_check_firmware(struct rt2x00_dev *rt2x00dev,
1159                                   const u8 *data, const size_t len)
1160 {
1161         u16 fw_crc;
1162         u16 crc;
1163
1164         /*
1165          * Only support 8kb firmware files.
1166          */
1167         if (len != 8192)
1168                 return FW_BAD_LENGTH;
1169
1170         /*
1171          * The last 2 bytes in the firmware array are the crc checksum itself,
1172          * this means that we should never pass those 2 bytes to the crc
1173          * algorithm.
1174          */
1175         fw_crc = (data[len - 2] << 8 | data[len - 1]);
1176
1177         /*
1178          * Use the crc itu-t algorithm.
1179          */
1180         crc = crc_itu_t(0, data, len - 2);
1181         crc = crc_itu_t_byte(crc, 0);
1182         crc = crc_itu_t_byte(crc, 0);
1183
1184         return (fw_crc == crc) ? FW_OK : FW_BAD_CRC;
1185 }
1186
1187 static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev,
1188                                  const u8 *data, const size_t len)
1189 {
1190         int i;
1191         u32 reg;
1192
1193         /*
1194          * Wait for stable hardware.
1195          */
1196         for (i = 0; i < 100; i++) {
1197                 rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
1198                 if (reg)
1199                         break;
1200                 msleep(1);
1201         }
1202
1203         if (!reg) {
1204                 ERROR(rt2x00dev, "Unstable hardware.\n");
1205                 return -EBUSY;
1206         }
1207
1208         /*
1209          * Prepare MCU and mailbox for firmware loading.
1210          */
1211         reg = 0;
1212         rt2x00_set_field32(&reg, MCU_CNTL_CSR_RESET, 1);
1213         rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
1214         rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff);
1215         rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
1216         rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, 0);
1217
1218         /*
1219          * Write firmware to device.
1220          */
1221         reg = 0;
1222         rt2x00_set_field32(&reg, MCU_CNTL_CSR_RESET, 1);
1223         rt2x00_set_field32(&reg, MCU_CNTL_CSR_SELECT_BANK, 1);
1224         rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
1225
1226         rt2x00pci_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
1227                                       data, len);
1228
1229         rt2x00_set_field32(&reg, MCU_CNTL_CSR_SELECT_BANK, 0);
1230         rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
1231
1232         rt2x00_set_field32(&reg, MCU_CNTL_CSR_RESET, 0);
1233         rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
1234
1235         for (i = 0; i < 100; i++) {
1236                 rt2x00pci_register_read(rt2x00dev, MCU_CNTL_CSR, &reg);
1237                 if (rt2x00_get_field32(reg, MCU_CNTL_CSR_READY))
1238                         break;
1239                 msleep(1);
1240         }
1241
1242         if (i == 100) {
1243                 ERROR(rt2x00dev, "MCU Control register not ready.\n");
1244                 return -EBUSY;
1245         }
1246
1247         /*
1248          * Hardware needs another millisecond before it is ready.
1249          */
1250         msleep(1);
1251
1252         /*
1253          * Reset MAC and BBP registers.
1254          */
1255         reg = 0;
1256         rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 1);
1257         rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 1);
1258         rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1259
1260         rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
1261         rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 0);
1262         rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 0);
1263         rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1264
1265         rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
1266         rt2x00_set_field32(&reg, MAC_CSR1_HOST_READY, 1);
1267         rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1268
1269         return 0;
1270 }
1271
1272 /*
1273  * Initialization functions.
1274  */
1275 static bool rt61pci_get_entry_state(struct queue_entry *entry)
1276 {
1277         struct queue_entry_priv_pci *entry_priv = entry->priv_data;
1278         u32 word;
1279
1280         if (entry->queue->qid == QID_RX) {
1281                 rt2x00_desc_read(entry_priv->desc, 0, &word);
1282
1283                 return rt2x00_get_field32(word, RXD_W0_OWNER_NIC);
1284         } else {
1285                 rt2x00_desc_read(entry_priv->desc, 0, &word);
1286
1287                 return (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
1288                         rt2x00_get_field32(word, TXD_W0_VALID));
1289         }
1290 }
1291
1292 static void rt61pci_clear_entry(struct queue_entry *entry)
1293 {
1294         struct queue_entry_priv_pci *entry_priv = entry->priv_data;
1295         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
1296         u32 word;
1297
1298         if (entry->queue->qid == QID_RX) {
1299                 rt2x00_desc_read(entry_priv->desc, 5, &word);
1300                 rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS,
1301                                    skbdesc->skb_dma);
1302                 rt2x00_desc_write(entry_priv->desc, 5, word);
1303
1304                 rt2x00_desc_read(entry_priv->desc, 0, &word);
1305                 rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
1306                 rt2x00_desc_write(entry_priv->desc, 0, word);
1307         } else {
1308                 rt2x00_desc_read(entry_priv->desc, 0, &word);
1309                 rt2x00_set_field32(&word, TXD_W0_VALID, 0);
1310                 rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
1311                 rt2x00_desc_write(entry_priv->desc, 0, word);
1312         }
1313 }
1314
1315 static int rt61pci_init_queues(struct rt2x00_dev *rt2x00dev)
1316 {
1317         struct queue_entry_priv_pci *entry_priv;
1318         u32 reg;
1319
1320         /*
1321          * Initialize registers.
1322          */
1323         rt2x00pci_register_read(rt2x00dev, TX_RING_CSR0, &reg);
1324         rt2x00_set_field32(&reg, TX_RING_CSR0_AC0_RING_SIZE,
1325                            rt2x00dev->tx[0].limit);
1326         rt2x00_set_field32(&reg, TX_RING_CSR0_AC1_RING_SIZE,
1327                            rt2x00dev->tx[1].limit);
1328         rt2x00_set_field32(&reg, TX_RING_CSR0_AC2_RING_SIZE,
1329                            rt2x00dev->tx[2].limit);
1330         rt2x00_set_field32(&reg, TX_RING_CSR0_AC3_RING_SIZE,
1331                            rt2x00dev->tx[3].limit);
1332         rt2x00pci_register_write(rt2x00dev, TX_RING_CSR0, reg);
1333
1334         rt2x00pci_register_read(rt2x00dev, TX_RING_CSR1, &reg);
1335         rt2x00_set_field32(&reg, TX_RING_CSR1_TXD_SIZE,
1336                            rt2x00dev->tx[0].desc_size / 4);
1337         rt2x00pci_register_write(rt2x00dev, TX_RING_CSR1, reg);
1338
1339         entry_priv = rt2x00dev->tx[0].entries[0].priv_data;
1340         rt2x00pci_register_read(rt2x00dev, AC0_BASE_CSR, &reg);
1341         rt2x00_set_field32(&reg, AC0_BASE_CSR_RING_REGISTER,
1342                            entry_priv->desc_dma);
1343         rt2x00pci_register_write(rt2x00dev, AC0_BASE_CSR, reg);
1344
1345         entry_priv = rt2x00dev->tx[1].entries[0].priv_data;
1346         rt2x00pci_register_read(rt2x00dev, AC1_BASE_CSR, &reg);
1347         rt2x00_set_field32(&reg, AC1_BASE_CSR_RING_REGISTER,
1348                            entry_priv->desc_dma);
1349         rt2x00pci_register_write(rt2x00dev, AC1_BASE_CSR, reg);
1350
1351         entry_priv = rt2x00dev->tx[2].entries[0].priv_data;
1352         rt2x00pci_register_read(rt2x00dev, AC2_BASE_CSR, &reg);
1353         rt2x00_set_field32(&reg, AC2_BASE_CSR_RING_REGISTER,
1354                            entry_priv->desc_dma);
1355         rt2x00pci_register_write(rt2x00dev, AC2_BASE_CSR, reg);
1356
1357         entry_priv = rt2x00dev->tx[3].entries[0].priv_data;
1358         rt2x00pci_register_read(rt2x00dev, AC3_BASE_CSR, &reg);
1359         rt2x00_set_field32(&reg, AC3_BASE_CSR_RING_REGISTER,
1360                            entry_priv->desc_dma);
1361         rt2x00pci_register_write(rt2x00dev, AC3_BASE_CSR, reg);
1362
1363         rt2x00pci_register_read(rt2x00dev, RX_RING_CSR, &reg);
1364         rt2x00_set_field32(&reg, RX_RING_CSR_RING_SIZE, rt2x00dev->rx->limit);
1365         rt2x00_set_field32(&reg, RX_RING_CSR_RXD_SIZE,
1366                            rt2x00dev->rx->desc_size / 4);
1367         rt2x00_set_field32(&reg, RX_RING_CSR_RXD_WRITEBACK_SIZE, 4);
1368         rt2x00pci_register_write(rt2x00dev, RX_RING_CSR, reg);
1369
1370         entry_priv = rt2x00dev->rx->entries[0].priv_data;
1371         rt2x00pci_register_read(rt2x00dev, RX_BASE_CSR, &reg);
1372         rt2x00_set_field32(&reg, RX_BASE_CSR_RING_REGISTER,
1373                            entry_priv->desc_dma);
1374         rt2x00pci_register_write(rt2x00dev, RX_BASE_CSR, reg);
1375
1376         rt2x00pci_register_read(rt2x00dev, TX_DMA_DST_CSR, &reg);
1377         rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC0, 2);
1378         rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC1, 2);
1379         rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC2, 2);
1380         rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC3, 2);
1381         rt2x00pci_register_write(rt2x00dev, TX_DMA_DST_CSR, reg);
1382
1383         rt2x00pci_register_read(rt2x00dev, LOAD_TX_RING_CSR, &reg);
1384         rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC0, 1);
1385         rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC1, 1);
1386         rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC2, 1);
1387         rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC3, 1);
1388         rt2x00pci_register_write(rt2x00dev, LOAD_TX_RING_CSR, reg);
1389
1390         rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, &reg);
1391         rt2x00_set_field32(&reg, RX_CNTL_CSR_LOAD_RXD, 1);
1392         rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg);
1393
1394         return 0;
1395 }
1396
1397 static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev)
1398 {
1399         u32 reg;
1400
1401         rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
1402         rt2x00_set_field32(&reg, TXRX_CSR0_AUTO_TX_SEQ, 1);
1403         rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX, 0);
1404         rt2x00_set_field32(&reg, TXRX_CSR0_TX_WITHOUT_WAITING, 0);
1405         rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
1406
1407         rt2x00pci_register_read(rt2x00dev, TXRX_CSR1, &reg);
1408         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */
1409         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0_VALID, 1);
1410         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1, 30); /* Rssi */
1411         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1_VALID, 1);
1412         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */
1413         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2_VALID, 1);
1414         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3, 30); /* Rssi */
1415         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3_VALID, 1);
1416         rt2x00pci_register_write(rt2x00dev, TXRX_CSR1, reg);
1417
1418         /*
1419          * CCK TXD BBP registers
1420          */
1421         rt2x00pci_register_read(rt2x00dev, TXRX_CSR2, &reg);
1422         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0, 13);
1423         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0_VALID, 1);
1424         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1, 12);
1425         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1_VALID, 1);
1426         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2, 11);
1427         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2_VALID, 1);
1428         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3, 10);
1429         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3_VALID, 1);
1430         rt2x00pci_register_write(rt2x00dev, TXRX_CSR2, reg);
1431
1432         /*
1433          * OFDM TXD BBP registers
1434          */
1435         rt2x00pci_register_read(rt2x00dev, TXRX_CSR3, &reg);
1436         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0, 7);
1437         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0_VALID, 1);
1438         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1, 6);
1439         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1_VALID, 1);
1440         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2, 5);
1441         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2_VALID, 1);
1442         rt2x00pci_register_write(rt2x00dev, TXRX_CSR3, reg);
1443
1444         rt2x00pci_register_read(rt2x00dev, TXRX_CSR7, &reg);
1445         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_6MBS, 59);
1446         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_9MBS, 53);
1447         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_12MBS, 49);
1448         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_18MBS, 46);
1449         rt2x00pci_register_write(rt2x00dev, TXRX_CSR7, reg);
1450
1451         rt2x00pci_register_read(rt2x00dev, TXRX_CSR8, &reg);
1452         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_24MBS, 44);
1453         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_36MBS, 42);
1454         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_48MBS, 42);
1455         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_54MBS, 42);
1456         rt2x00pci_register_write(rt2x00dev, TXRX_CSR8, reg);
1457
1458         rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
1459         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL, 0);
1460         rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
1461         rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, 0);
1462         rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
1463         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
1464         rt2x00_set_field32(&reg, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0);
1465         rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
1466
1467         rt2x00pci_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);
1468
1469         rt2x00pci_register_write(rt2x00dev, MAC_CSR6, 0x00000fff);
1470
1471         rt2x00pci_register_read(rt2x00dev, MAC_CSR9, &reg);
1472         rt2x00_set_field32(&reg, MAC_CSR9_CW_SELECT, 0);
1473         rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg);
1474
1475         rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x0000071c);
1476
1477         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
1478                 return -EBUSY;
1479
1480         rt2x00pci_register_write(rt2x00dev, MAC_CSR13, 0x0000e000);
1481
1482         /*
1483          * Invalidate all Shared Keys (SEC_CSR0),
1484          * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5)
1485          */
1486         rt2x00pci_register_write(rt2x00dev, SEC_CSR0, 0x00000000);
1487         rt2x00pci_register_write(rt2x00dev, SEC_CSR1, 0x00000000);
1488         rt2x00pci_register_write(rt2x00dev, SEC_CSR5, 0x00000000);
1489
1490         rt2x00pci_register_write(rt2x00dev, PHY_CSR1, 0x000023b0);
1491         rt2x00pci_register_write(rt2x00dev, PHY_CSR5, 0x060a100c);
1492         rt2x00pci_register_write(rt2x00dev, PHY_CSR6, 0x00080606);
1493         rt2x00pci_register_write(rt2x00dev, PHY_CSR7, 0x00000a08);
1494
1495         rt2x00pci_register_write(rt2x00dev, PCI_CFG_CSR, 0x28ca4404);
1496
1497         rt2x00pci_register_write(rt2x00dev, TEST_MODE_CSR, 0x00000200);
1498
1499         rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff);
1500
1501         /*
1502          * Clear all beacons
1503          * For the Beacon base registers we only need to clear
1504          * the first byte since that byte contains the VALID and OWNER
1505          * bits which (when set to 0) will invalidate the entire beacon.
1506          */
1507         rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
1508         rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
1509         rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
1510         rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
1511
1512         /*
1513          * We must clear the error counters.
1514          * These registers are cleared on read,
1515          * so we may pass a useless variable to store the value.
1516          */
1517         rt2x00pci_register_read(rt2x00dev, STA_CSR0, &reg);
1518         rt2x00pci_register_read(rt2x00dev, STA_CSR1, &reg);
1519         rt2x00pci_register_read(rt2x00dev, STA_CSR2, &reg);
1520
1521         /*
1522          * Reset MAC and BBP registers.
1523          */
1524         rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
1525         rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 1);
1526         rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 1);
1527         rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1528
1529         rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
1530         rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 0);
1531         rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 0);
1532         rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1533
1534         rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
1535         rt2x00_set_field32(&reg, MAC_CSR1_HOST_READY, 1);
1536         rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1537
1538         return 0;
1539 }
1540
1541 static int rt61pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
1542 {
1543         unsigned int i;
1544         u8 value;
1545
1546         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1547                 rt61pci_bbp_read(rt2x00dev, 0, &value);
1548                 if ((value != 0xff) && (value != 0x00))
1549                         return 0;
1550                 udelay(REGISTER_BUSY_DELAY);
1551         }
1552
1553         ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
1554         return -EACCES;
1555 }
1556
1557 static int rt61pci_init_bbp(struct rt2x00_dev *rt2x00dev)
1558 {
1559         unsigned int i;
1560         u16 eeprom;
1561         u8 reg_id;
1562         u8 value;
1563
1564         if (unlikely(rt61pci_wait_bbp_ready(rt2x00dev)))
1565                 return -EACCES;
1566
1567         rt61pci_bbp_write(rt2x00dev, 3, 0x00);
1568         rt61pci_bbp_write(rt2x00dev, 15, 0x30);
1569         rt61pci_bbp_write(rt2x00dev, 21, 0xc8);
1570         rt61pci_bbp_write(rt2x00dev, 22, 0x38);
1571         rt61pci_bbp_write(rt2x00dev, 23, 0x06);
1572         rt61pci_bbp_write(rt2x00dev, 24, 0xfe);
1573         rt61pci_bbp_write(rt2x00dev, 25, 0x0a);
1574         rt61pci_bbp_write(rt2x00dev, 26, 0x0d);
1575         rt61pci_bbp_write(rt2x00dev, 34, 0x12);
1576         rt61pci_bbp_write(rt2x00dev, 37, 0x07);
1577         rt61pci_bbp_write(rt2x00dev, 39, 0xf8);
1578         rt61pci_bbp_write(rt2x00dev, 41, 0x60);
1579         rt61pci_bbp_write(rt2x00dev, 53, 0x10);
1580         rt61pci_bbp_write(rt2x00dev, 54, 0x18);
1581         rt61pci_bbp_write(rt2x00dev, 60, 0x10);
1582         rt61pci_bbp_write(rt2x00dev, 61, 0x04);
1583         rt61pci_bbp_write(rt2x00dev, 62, 0x04);
1584         rt61pci_bbp_write(rt2x00dev, 75, 0xfe);
1585         rt61pci_bbp_write(rt2x00dev, 86, 0xfe);
1586         rt61pci_bbp_write(rt2x00dev, 88, 0xfe);
1587         rt61pci_bbp_write(rt2x00dev, 90, 0x0f);
1588         rt61pci_bbp_write(rt2x00dev, 99, 0x00);
1589         rt61pci_bbp_write(rt2x00dev, 102, 0x16);
1590         rt61pci_bbp_write(rt2x00dev, 107, 0x04);
1591
1592         for (i = 0; i < EEPROM_BBP_SIZE; i++) {
1593                 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
1594
1595                 if (eeprom != 0xffff && eeprom != 0x0000) {
1596                         reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
1597                         value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
1598                         rt61pci_bbp_write(rt2x00dev, reg_id, value);
1599                 }
1600         }
1601
1602         return 0;
1603 }
1604
1605 /*
1606  * Device state switch handlers.
1607  */
1608 static void rt61pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
1609                               enum dev_state state)
1610 {
1611         u32 reg;
1612
1613         rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
1614         rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX,
1615                            (state == STATE_RADIO_RX_OFF) ||
1616                            (state == STATE_RADIO_RX_OFF_LINK));
1617         rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
1618 }
1619
1620 static void rt61pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
1621                                enum dev_state state)
1622 {
1623         int mask = (state == STATE_RADIO_IRQ_OFF);
1624         u32 reg;
1625
1626         /*
1627          * When interrupts are being enabled, the interrupt registers
1628          * should clear the register to assure a clean state.
1629          */
1630         if (state == STATE_RADIO_IRQ_ON) {
1631                 rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
1632                 rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
1633
1634                 rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, &reg);
1635                 rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg);
1636         }
1637
1638         /*
1639          * Only toggle the interrupts bits we are going to use.
1640          * Non-checked interrupt bits are disabled by default.
1641          */
1642         rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, &reg);
1643         rt2x00_set_field32(&reg, INT_MASK_CSR_TXDONE, mask);
1644         rt2x00_set_field32(&reg, INT_MASK_CSR_RXDONE, mask);
1645         rt2x00_set_field32(&reg, INT_MASK_CSR_ENABLE_MITIGATION, mask);
1646         rt2x00_set_field32(&reg, INT_MASK_CSR_MITIGATION_PERIOD, 0xff);
1647         rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg);
1648
1649         rt2x00pci_register_read(rt2x00dev, MCU_INT_MASK_CSR, &reg);
1650         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_0, mask);
1651         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_1, mask);
1652         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_2, mask);
1653         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_3, mask);
1654         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_4, mask);
1655         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_5, mask);
1656         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_6, mask);
1657         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_7, mask);
1658         rt2x00pci_register_write(rt2x00dev, MCU_INT_MASK_CSR, reg);
1659 }
1660
1661 static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev)
1662 {
1663         u32 reg;
1664
1665         /*
1666          * Initialize all registers.
1667          */
1668         if (unlikely(rt61pci_init_queues(rt2x00dev) ||
1669                      rt61pci_init_registers(rt2x00dev) ||
1670                      rt61pci_init_bbp(rt2x00dev)))
1671                 return -EIO;
1672
1673         /*
1674          * Enable RX.
1675          */
1676         rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, &reg);
1677         rt2x00_set_field32(&reg, RX_CNTL_CSR_ENABLE_RX_DMA, 1);
1678         rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg);
1679
1680         return 0;
1681 }
1682
1683 static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev)
1684 {
1685         /*
1686          * Disable power
1687          */
1688         rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x00001818);
1689 }
1690
1691 static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state)
1692 {
1693         u32 reg;
1694         unsigned int i;
1695         char put_to_sleep;
1696
1697         put_to_sleep = (state != STATE_AWAKE);
1698
1699         rt2x00pci_register_read(rt2x00dev, MAC_CSR12, &reg);
1700         rt2x00_set_field32(&reg, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep);
1701         rt2x00_set_field32(&reg, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep);
1702         rt2x00pci_register_write(rt2x00dev, MAC_CSR12, reg);
1703
1704         /*
1705          * Device is not guaranteed to be in the requested state yet.
1706          * We must wait until the register indicates that the
1707          * device has entered the correct state.
1708          */
1709         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1710                 rt2x00pci_register_read(rt2x00dev, MAC_CSR12, &reg);
1711                 state = rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE);
1712                 if (state == !put_to_sleep)
1713                         return 0;
1714                 msleep(10);
1715         }
1716
1717         return -EBUSY;
1718 }
1719
1720 static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
1721                                     enum dev_state state)
1722 {
1723         int retval = 0;
1724
1725         switch (state) {
1726         case STATE_RADIO_ON:
1727                 retval = rt61pci_enable_radio(rt2x00dev);
1728                 break;
1729         case STATE_RADIO_OFF:
1730                 rt61pci_disable_radio(rt2x00dev);
1731                 break;
1732         case STATE_RADIO_RX_ON:
1733         case STATE_RADIO_RX_ON_LINK:
1734         case STATE_RADIO_RX_OFF:
1735         case STATE_RADIO_RX_OFF_LINK:
1736                 rt61pci_toggle_rx(rt2x00dev, state);
1737                 break;
1738         case STATE_RADIO_IRQ_ON:
1739         case STATE_RADIO_IRQ_OFF:
1740                 rt61pci_toggle_irq(rt2x00dev, state);
1741                 break;
1742         case STATE_DEEP_SLEEP:
1743         case STATE_SLEEP:
1744         case STATE_STANDBY:
1745         case STATE_AWAKE:
1746                 retval = rt61pci_set_state(rt2x00dev, state);
1747                 break;
1748         default:
1749                 retval = -ENOTSUPP;
1750                 break;
1751         }
1752
1753         if (unlikely(retval))
1754                 ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
1755                       state, retval);
1756
1757         return retval;
1758 }
1759
1760 /*
1761  * TX descriptor initialization
1762  */
1763 static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1764                                   struct sk_buff *skb,
1765                                   struct txentry_desc *txdesc)
1766 {
1767         struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
1768         __le32 *txd = skbdesc->desc;
1769         u32 word;
1770
1771         /*
1772          * Start writing the descriptor words.
1773          */
1774         rt2x00_desc_read(txd, 1, &word);
1775         rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->queue);
1776         rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs);
1777         rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
1778         rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
1779         rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
1780         rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
1781                            test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
1782         rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
1783         rt2x00_desc_write(txd, 1, word);
1784
1785         rt2x00_desc_read(txd, 2, &word);
1786         rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->signal);
1787         rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->service);
1788         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, txdesc->length_low);
1789         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
1790         rt2x00_desc_write(txd, 2, word);
1791
1792         if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
1793                 _rt2x00_desc_write(txd, 3, skbdesc->iv[0]);
1794                 _rt2x00_desc_write(txd, 4, skbdesc->iv[1]);
1795         }
1796
1797         rt2x00_desc_read(txd, 5, &word);
1798         rt2x00_set_field32(&word, TXD_W5_PID_TYPE, skbdesc->entry->queue->qid);
1799         rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE,
1800                            skbdesc->entry->entry_idx);
1801         rt2x00_set_field32(&word, TXD_W5_TX_POWER,
1802                            TXPOWER_TO_DEV(rt2x00dev->tx_power));
1803         rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
1804         rt2x00_desc_write(txd, 5, word);
1805
1806         rt2x00_desc_read(txd, 6, &word);
1807         rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS,
1808                            skbdesc->skb_dma);
1809         rt2x00_desc_write(txd, 6, word);
1810
1811         if (skbdesc->desc_len > TXINFO_SIZE) {
1812                 rt2x00_desc_read(txd, 11, &word);
1813                 rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, skb->len);
1814                 rt2x00_desc_write(txd, 11, word);
1815         }
1816
1817         rt2x00_desc_read(txd, 0, &word);
1818         rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
1819         rt2x00_set_field32(&word, TXD_W0_VALID, 1);
1820         rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1821                            test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
1822         rt2x00_set_field32(&word, TXD_W0_ACK,
1823                            test_bit(ENTRY_TXD_ACK, &txdesc->flags));
1824         rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1825                            test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
1826         rt2x00_set_field32(&word, TXD_W0_OFDM,
1827                            (txdesc->rate_mode == RATE_MODE_OFDM));
1828         rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
1829         rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
1830                            test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
1831         rt2x00_set_field32(&word, TXD_W0_TKIP_MIC,
1832                            test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags));
1833         rt2x00_set_field32(&word, TXD_W0_KEY_TABLE,
1834                            test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags));
1835         rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx);
1836         rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
1837         rt2x00_set_field32(&word, TXD_W0_BURST,
1838                            test_bit(ENTRY_TXD_BURST, &txdesc->flags));
1839         rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher);
1840         rt2x00_desc_write(txd, 0, word);
1841 }
1842
1843 /*
1844  * TX data initialization
1845  */
1846 static void rt61pci_write_beacon(struct queue_entry *entry)
1847 {
1848         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
1849         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
1850         unsigned int beacon_base;
1851         u32 reg;
1852
1853         /*
1854          * Disable beaconing while we are reloading the beacon data,
1855          * otherwise we might be sending out invalid data.
1856          */
1857         rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
1858         rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
1859         rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
1860         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
1861         rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
1862
1863         /*
1864          * Write entire beacon with descriptor to register.
1865          */
1866         beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
1867         rt2x00pci_register_multiwrite(rt2x00dev,
1868                                       beacon_base,
1869                                       skbdesc->desc, skbdesc->desc_len);
1870         rt2x00pci_register_multiwrite(rt2x00dev,
1871                                       beacon_base + skbdesc->desc_len,
1872                                       entry->skb->data, entry->skb->len);
1873
1874         /*
1875          * Clean up beacon skb.
1876          */
1877         dev_kfree_skb_any(entry->skb);
1878         entry->skb = NULL;
1879 }
1880
1881 static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1882                                   const enum data_queue_qid queue)
1883 {
1884         u32 reg;
1885
1886         if (queue == QID_BEACON) {
1887                 /*
1888                  * For Wi-Fi faily generated beacons between participating
1889                  * stations. Set TBTT phase adaptive adjustment step to 8us.
1890                  */
1891                 rt2x00pci_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
1892
1893                 rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
1894                 if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) {
1895                         rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
1896                         rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
1897                         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
1898                         rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
1899                 }
1900                 return;
1901         }
1902
1903         rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
1904         rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC0, (queue == QID_AC_BE));
1905         rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC1, (queue == QID_AC_BK));
1906         rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC2, (queue == QID_AC_VI));
1907         rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC3, (queue == QID_AC_VO));
1908         rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
1909 }
1910
1911 static void rt61pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
1912                                   const enum data_queue_qid qid)
1913 {
1914         u32 reg;
1915
1916         if (qid == QID_BEACON) {
1917                 rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0);
1918                 return;
1919         }
1920
1921         rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
1922         rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC0, (qid == QID_AC_BE));
1923         rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC1, (qid == QID_AC_BK));
1924         rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC2, (qid == QID_AC_VI));
1925         rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC3, (qid == QID_AC_VO));
1926         rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
1927 }
1928
1929 /*
1930  * RX control handlers
1931  */
1932 static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
1933 {
1934         u8 offset = rt2x00dev->lna_gain;
1935         u8 lna;
1936
1937         lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
1938         switch (lna) {
1939         case 3:
1940                 offset += 90;
1941                 break;
1942         case 2:
1943                 offset += 74;
1944                 break;
1945         case 1:
1946                 offset += 64;
1947                 break;
1948         default:
1949                 return 0;
1950         }
1951
1952         if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
1953                 if (lna == 3 || lna == 2)
1954                         offset += 10;
1955         }
1956
1957         return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
1958 }
1959
1960 static void rt61pci_fill_rxdone(struct queue_entry *entry,
1961                                 struct rxdone_entry_desc *rxdesc)
1962 {
1963         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
1964         struct queue_entry_priv_pci *entry_priv = entry->priv_data;
1965         u32 word0;
1966         u32 word1;
1967
1968         rt2x00_desc_read(entry_priv->desc, 0, &word0);
1969         rt2x00_desc_read(entry_priv->desc, 1, &word1);
1970
1971         if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
1972                 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
1973
1974         if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
1975                 rxdesc->cipher =
1976                     rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG);
1977                 rxdesc->cipher_status =
1978                     rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR);
1979         }
1980
1981         if (rxdesc->cipher != CIPHER_NONE) {
1982                 _rt2x00_desc_read(entry_priv->desc, 2, &rxdesc->iv[0]);
1983                 _rt2x00_desc_read(entry_priv->desc, 3, &rxdesc->iv[1]);
1984                 rxdesc->dev_flags |= RXDONE_CRYPTO_IV;
1985
1986                 _rt2x00_desc_read(entry_priv->desc, 4, &rxdesc->icv);
1987                 rxdesc->dev_flags |= RXDONE_CRYPTO_ICV;
1988
1989                 /*
1990                  * Hardware has stripped IV/EIV data from 802.11 frame during
1991                  * decryption. It has provided the data seperately but rt2x00lib
1992                  * should decide if it should be reinserted.
1993                  */
1994                 rxdesc->flags |= RX_FLAG_IV_STRIPPED;
1995
1996                 /*
1997                  * FIXME: Legacy driver indicates that the frame does
1998                  * contain the Michael Mic. Unfortunately, in rt2x00
1999                  * the MIC seems to be missing completely...
2000                  */
2001                 rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
2002
2003                 if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
2004                         rxdesc->flags |= RX_FLAG_DECRYPTED;
2005                 else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
2006                         rxdesc->flags |= RX_FLAG_MMIC_ERROR;
2007         }
2008
2009         /*
2010          * Obtain the status about this packet.
2011          * When frame was received with an OFDM bitrate,
2012          * the signal is the PLCP value. If it was received with
2013          * a CCK bitrate the signal is the rate in 100kbit/s.
2014          */
2015         rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
2016         rxdesc->rssi = rt61pci_agc_to_rssi(rt2x00dev, word1);
2017         rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
2018
2019         if (rt2x00_get_field32(word0, RXD_W0_OFDM))
2020                 rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
2021         else
2022                 rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
2023         if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
2024                 rxdesc->dev_flags |= RXDONE_MY_BSS;
2025 }
2026
2027 /*
2028  * Interrupt functions.
2029  */
2030 static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
2031 {
2032         struct data_queue *queue;
2033         struct queue_entry *entry;
2034         struct queue_entry *entry_done;
2035         struct queue_entry_priv_pci *entry_priv;
2036         struct txdone_entry_desc txdesc;
2037         u32 word;
2038         u32 reg;
2039         u32 old_reg;
2040         int type;
2041         int index;
2042
2043         /*
2044          * During each loop we will compare the freshly read
2045          * STA_CSR4 register value with the value read from
2046          * the previous loop. If the 2 values are equal then
2047          * we should stop processing because the chance it
2048          * quite big that the device has been unplugged and
2049          * we risk going into an endless loop.
2050          */
2051         old_reg = 0;
2052
2053         while (1) {
2054                 rt2x00pci_register_read(rt2x00dev, STA_CSR4, &reg);
2055                 if (!rt2x00_get_field32(reg, STA_CSR4_VALID))
2056                         break;
2057
2058                 if (old_reg == reg)
2059                         break;
2060                 old_reg = reg;
2061
2062                 /*
2063                  * Skip this entry when it contains an invalid
2064                  * queue identication number.
2065                  */
2066                 type = rt2x00_get_field32(reg, STA_CSR4_PID_TYPE);
2067                 queue = rt2x00queue_get_queue(rt2x00dev, type);
2068                 if (unlikely(!queue))
2069                         continue;
2070
2071                 /*
2072                  * Skip this entry when it contains an invalid
2073                  * index number.
2074                  */
2075                 index = rt2x00_get_field32(reg, STA_CSR4_PID_SUBTYPE);
2076                 if (unlikely(index >= queue->limit))
2077                         continue;
2078
2079                 entry = &queue->entries[index];
2080                 entry_priv = entry->priv_data;
2081                 rt2x00_desc_read(entry_priv->desc, 0, &word);
2082
2083                 if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
2084                     !rt2x00_get_field32(word, TXD_W0_VALID))
2085                         return;
2086
2087                 entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
2088                 while (entry != entry_done) {
2089                         /* Catch up.
2090                          * Just report any entries we missed as failed.
2091                          */
2092                         WARNING(rt2x00dev,
2093                                 "TX status report missed for entry %d\n",
2094                                 entry_done->entry_idx);
2095
2096                         txdesc.flags = 0;
2097                         __set_bit(TXDONE_UNKNOWN, &txdesc.flags);
2098                         txdesc.retry = 0;
2099
2100                         rt2x00lib_txdone(entry_done, &txdesc);
2101                         entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
2102                 }
2103
2104                 /*
2105                  * Obtain the status about this packet.
2106                  */
2107                 txdesc.flags = 0;
2108                 switch (rt2x00_get_field32(reg, STA_CSR4_TX_RESULT)) {
2109                 case 0: /* Success, maybe with retry */
2110                         __set_bit(TXDONE_SUCCESS, &txdesc.flags);
2111                         break;
2112                 case 6: /* Failure, excessive retries */
2113                         __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
2114                         /* Don't break, this is a failed frame! */
2115                 default: /* Failure */
2116                         __set_bit(TXDONE_FAILURE, &txdesc.flags);
2117                 }
2118                 txdesc.retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT);
2119
2120                 rt2x00lib_txdone(entry, &txdesc);
2121         }
2122 }
2123
2124 static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance)
2125 {
2126         struct rt2x00_dev *rt2x00dev = dev_instance;
2127         u32 reg_mcu;
2128         u32 reg;
2129
2130         /*
2131          * Get the interrupt sources & saved to local variable.
2132          * Write register value back to clear pending interrupts.
2133          */
2134         rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, &reg_mcu);
2135         rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg_mcu);
2136
2137         rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
2138         rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
2139
2140         if (!reg && !reg_mcu)
2141                 return IRQ_NONE;
2142
2143         if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
2144                 return IRQ_HANDLED;
2145
2146         /*
2147          * Handle interrupts, walk through all bits
2148          * and run the tasks, the bits are checked in order of
2149          * priority.
2150          */
2151
2152         /*
2153          * 1 - Rx ring done interrupt.
2154          */
2155         if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RXDONE))
2156                 rt2x00pci_rxdone(rt2x00dev);
2157
2158         /*
2159          * 2 - Tx ring done interrupt.
2160          */
2161         if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TXDONE))
2162                 rt61pci_txdone(rt2x00dev);
2163
2164         /*
2165          * 3 - Handle MCU command done.
2166          */
2167         if (reg_mcu)
2168                 rt2x00pci_register_write(rt2x00dev,
2169                                          M2H_CMD_DONE_CSR, 0xffffffff);
2170
2171         return IRQ_HANDLED;
2172 }
2173
2174 /*
2175  * Device probe functions.
2176  */
2177 static int rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
2178 {
2179         struct eeprom_93cx6 eeprom;
2180         u32 reg;
2181         u16 word;
2182         u8 *mac;
2183         s8 value;
2184
2185         rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, &reg);
2186
2187         eeprom.data = rt2x00dev;
2188         eeprom.register_read = rt61pci_eepromregister_read;
2189         eeprom.register_write = rt61pci_eepromregister_write;
2190         eeprom.width = rt2x00_get_field32(reg, E2PROM_CSR_TYPE_93C46) ?
2191             PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
2192         eeprom.reg_data_in = 0;
2193         eeprom.reg_data_out = 0;
2194         eeprom.reg_data_clock = 0;
2195         eeprom.reg_chip_select = 0;
2196
2197         eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
2198                                EEPROM_SIZE / sizeof(u16));
2199
2200         /*
2201          * Start validation of the data that has been read.
2202          */
2203         mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
2204         if (!is_valid_ether_addr(mac)) {
2205                 random_ether_addr(mac);
2206                 EEPROM(rt2x00dev, "MAC: %pM\n", mac);
2207         }
2208
2209         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
2210         if (word == 0xffff) {
2211                 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
2212                 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
2213                                    ANTENNA_B);
2214                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
2215                                    ANTENNA_B);
2216                 rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0);
2217                 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
2218                 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
2219                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5225);
2220                 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
2221                 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
2222         }
2223
2224         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
2225         if (word == 0xffff) {
2226                 rt2x00_set_field16(&word, EEPROM_NIC_ENABLE_DIVERSITY, 0);
2227                 rt2x00_set_field16(&word, EEPROM_NIC_TX_DIVERSITY, 0);
2228                 rt2x00_set_field16(&word, EEPROM_NIC_RX_FIXED, 0);
2229                 rt2x00_set_field16(&word, EEPROM_NIC_TX_FIXED, 0);
2230                 rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0);
2231                 rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
2232                 rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0);
2233                 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
2234                 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
2235         }
2236
2237         rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word);
2238         if (word == 0xffff) {
2239                 rt2x00_set_field16(&word, EEPROM_LED_LED_MODE,
2240                                    LED_MODE_DEFAULT);
2241                 rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word);
2242                 EEPROM(rt2x00dev, "Led: 0x%04x\n", word);
2243         }
2244
2245         rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
2246         if (word == 0xffff) {
2247                 rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
2248                 rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0);
2249                 rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
2250                 EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
2251         }
2252
2253         rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word);
2254         if (word == 0xffff) {
2255                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
2256                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
2257                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
2258                 EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
2259         } else {
2260                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1);
2261                 if (value < -10 || value > 10)
2262                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
2263                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2);
2264                 if (value < -10 || value > 10)
2265                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
2266                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
2267         }
2268
2269         rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word);
2270         if (word == 0xffff) {
2271                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
2272                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
2273                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
2274                 EEPROM(rt2x00dev, "RSSI OFFSET A: 0x%04x\n", word);
2275         } else {
2276                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1);
2277                 if (value < -10 || value > 10)
2278                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
2279                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2);
2280                 if (value < -10 || value > 10)
2281                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
2282                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
2283         }
2284
2285         return 0;
2286 }
2287
2288 static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
2289 {
2290         u32 reg;
2291         u16 value;
2292         u16 eeprom;
2293
2294         /*
2295          * Read EEPROM word for configuration.
2296          */
2297         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
2298
2299         /*
2300          * Identify RF chipset.
2301          */
2302         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
2303         rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
2304         rt2x00_set_chip_rf(rt2x00dev, value, reg);
2305
2306         if (!rt2x00_rf(&rt2x00dev->chip, RF5225) &&
2307             !rt2x00_rf(&rt2x00dev->chip, RF5325) &&
2308             !rt2x00_rf(&rt2x00dev->chip, RF2527) &&
2309             !rt2x00_rf(&rt2x00dev->chip, RF2529)) {
2310                 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
2311                 return -ENODEV;
2312         }
2313
2314         /*
2315          * Determine number of antennas.
2316          */
2317         if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_NUM) == 2)
2318                 __set_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags);
2319
2320         /*
2321          * Identify default antenna configuration.
2322          */
2323         rt2x00dev->default_ant.tx =
2324             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
2325         rt2x00dev->default_ant.rx =
2326             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
2327
2328         /*
2329          * Read the Frame type.
2330          */
2331         if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE))
2332                 __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags);
2333
2334         /*
2335          * Detect if this device has an hardware controlled radio.
2336          */
2337         if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
2338                 __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
2339
2340         /*
2341          * Read frequency offset and RF programming sequence.
2342          */
2343         rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
2344         if (rt2x00_get_field16(eeprom, EEPROM_FREQ_SEQ))
2345                 __set_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags);
2346
2347         rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
2348
2349         /*
2350          * Read external LNA informations.
2351          */
2352         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
2353
2354         if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A))
2355                 __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
2356         if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG))
2357                 __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
2358
2359         /*
2360          * When working with a RF2529 chip without double antenna
2361          * the antenna settings should be gathered from the NIC
2362          * eeprom word.
2363          */
2364         if (rt2x00_rf(&rt2x00dev->chip, RF2529) &&
2365             !test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags)) {
2366                 rt2x00dev->default_ant.rx =
2367                     ANTENNA_A + rt2x00_get_field16(eeprom, EEPROM_NIC_RX_FIXED);
2368                 rt2x00dev->default_ant.tx =
2369                     ANTENNA_B - rt2x00_get_field16(eeprom, EEPROM_NIC_TX_FIXED);
2370
2371                 if (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY))
2372                         rt2x00dev->default_ant.tx = ANTENNA_SW_DIVERSITY;
2373                 if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY))
2374                         rt2x00dev->default_ant.rx = ANTENNA_SW_DIVERSITY;
2375         }
2376
2377         /*
2378          * Store led settings, for correct led behaviour.
2379          * If the eeprom value is invalid,
2380          * switch to default led mode.
2381          */
2382 #ifdef CONFIG_RT2X00_LIB_LEDS
2383         rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
2384         value = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE);
2385
2386         rt61pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
2387         rt61pci_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
2388         if (value == LED_MODE_SIGNAL_STRENGTH)
2389                 rt61pci_init_led(rt2x00dev, &rt2x00dev->led_qual,
2390                                  LED_TYPE_QUALITY);
2391
2392         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value);
2393         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0,
2394                            rt2x00_get_field16(eeprom,
2395                                               EEPROM_LED_POLARITY_GPIO_0));
2396         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1,
2397                            rt2x00_get_field16(eeprom,
2398                                               EEPROM_LED_POLARITY_GPIO_1));
2399         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2,
2400                            rt2x00_get_field16(eeprom,
2401                                               EEPROM_LED_POLARITY_GPIO_2));
2402         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3,
2403                            rt2x00_get_field16(eeprom,
2404                                               EEPROM_LED_POLARITY_GPIO_3));
2405         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4,
2406                            rt2x00_get_field16(eeprom,
2407                                               EEPROM_LED_POLARITY_GPIO_4));
2408         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT,
2409                            rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT));
2410         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG,
2411                            rt2x00_get_field16(eeprom,
2412                                               EEPROM_LED_POLARITY_RDY_G));
2413         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A,
2414                            rt2x00_get_field16(eeprom,
2415                                               EEPROM_LED_POLARITY_RDY_A));
2416 #endif /* CONFIG_RT2X00_LIB_LEDS */
2417
2418         return 0;
2419 }
2420
2421 /*
2422  * RF value list for RF5225 & RF5325
2423  * Supports: 2.4 GHz & 5.2 GHz, rf_sequence disabled
2424  */
2425 static const struct rf_channel rf_vals_noseq[] = {
2426         { 1,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
2427         { 2,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
2428         { 3,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
2429         { 4,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
2430         { 5,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
2431         { 6,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
2432         { 7,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
2433         { 8,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
2434         { 9,  0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
2435         { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
2436         { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
2437         { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
2438         { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
2439         { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },
2440
2441         /* 802.11 UNI / HyperLan 2 */
2442         { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 },
2443         { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 },
2444         { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b },
2445         { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 },
2446         { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b },
2447         { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 },
2448         { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 },
2449         { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b },
2450
2451         /* 802.11 HyperLan 2 */
2452         { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 },
2453         { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b },
2454         { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 },
2455         { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b },
2456         { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 },
2457         { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 },
2458         { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b },
2459         { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 },
2460         { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b },
2461         { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 },
2462
2463         /* 802.11 UNII */
2464         { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 },
2465         { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f },
2466         { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 },
2467         { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 },
2468         { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f },
2469         { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 },
2470
2471         /* MMAC(Japan)J52 ch 34,38,42,46 */
2472         { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b },
2473         { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 },
2474         { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b },
2475         { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 },
2476 };
2477
2478 /*
2479  * RF value list for RF5225 & RF5325
2480  * Supports: 2.4 GHz & 5.2 GHz, rf_sequence enabled
2481  */
2482 static const struct rf_channel rf_vals_seq[] = {
2483         { 1,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
2484         { 2,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
2485         { 3,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
2486         { 4,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
2487         { 5,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
2488         { 6,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
2489         { 7,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
2490         { 8,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
2491         { 9,  0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
2492         { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
2493         { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
2494         { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
2495         { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
2496         { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },
2497
2498         /* 802.11 UNI / HyperLan 2 */
2499         { 36, 0x00002cd4, 0x0004481a, 0x00098455, 0x000c0a03 },
2500         { 40, 0x00002cd0, 0x00044682, 0x00098455, 0x000c0a03 },
2501         { 44, 0x00002cd0, 0x00044686, 0x00098455, 0x000c0a1b },
2502         { 48, 0x00002cd0, 0x0004468e, 0x00098655, 0x000c0a0b },
2503         { 52, 0x00002cd0, 0x00044692, 0x00098855, 0x000c0a23 },
2504         { 56, 0x00002cd0, 0x0004469a, 0x00098c55, 0x000c0a13 },
2505         { 60, 0x00002cd0, 0x000446a2, 0x00098e55, 0x000c0a03 },
2506         { 64, 0x00002cd0, 0x000446a6, 0x00099255, 0x000c0a1b },
2507
2508         /* 802.11 HyperLan 2 */
2509         { 100, 0x00002cd4, 0x0004489a, 0x000b9855, 0x000c0a03 },
2510         { 104, 0x00002cd4, 0x000448a2, 0x000b9855, 0x000c0a03 },
2511         { 108, 0x00002cd4, 0x000448aa, 0x000b9855, 0x000c0a03 },
2512         { 112, 0x00002cd4, 0x000448b2, 0x000b9a55, 0x000c0a03 },
2513         { 116, 0x00002cd4, 0x000448ba, 0x000b9a55, 0x000c0a03 },
2514         { 120, 0x00002cd0, 0x00044702, 0x000b9a55, 0x000c0a03 },
2515         { 124, 0x00002cd0, 0x00044706, 0x000b9a55, 0x000c0a1b },
2516         { 128, 0x00002cd0, 0x0004470e, 0x000b9c55, 0x000c0a0b },
2517         { 132, 0x00002cd0, 0x00044712, 0x000b9c55, 0x000c0a23 },
2518         { 136, 0x00002cd0, 0x0004471a, 0x000b9e55, 0x000c0a13 },
2519
2520         /* 802.11 UNII */
2521         { 140, 0x00002cd0, 0x00044722, 0x000b9e55, 0x000c0a03 },
2522         { 149, 0x00002cd0, 0x0004472e, 0x000ba255, 0x000c0a1b },
2523         { 153, 0x00002cd0, 0x00044736, 0x000ba255, 0x000c0a0b },
2524         { 157, 0x00002cd4, 0x0004490a, 0x000ba255, 0x000c0a17 },
2525         { 161, 0x00002cd4, 0x00044912, 0x000ba255, 0x000c0a17 },
2526         { 165, 0x00002cd4, 0x0004491a, 0x000ba255, 0x000c0a17 },
2527
2528         /* MMAC(Japan)J52 ch 34,38,42,46 */
2529         { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000c0a0b },
2530         { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000c0a13 },
2531         { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000c0a1b },
2532         { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000c0a23 },
2533 };
2534
2535 static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
2536 {
2537         struct hw_mode_spec *spec = &rt2x00dev->spec;
2538         struct channel_info *info;
2539         char *tx_power;
2540         unsigned int i;
2541
2542         /*
2543          * Initialize all hw fields.
2544          */
2545         rt2x00dev->hw->flags =
2546             IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
2547             IEEE80211_HW_SIGNAL_DBM |
2548             IEEE80211_HW_SUPPORTS_PS |
2549             IEEE80211_HW_PS_NULLFUNC_STACK;
2550         rt2x00dev->hw->extra_tx_headroom = 0;
2551
2552         SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
2553         SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
2554                                 rt2x00_eeprom_addr(rt2x00dev,
2555                                                    EEPROM_MAC_ADDR_0));
2556
2557         /*
2558          * Initialize hw_mode information.
2559          */
2560         spec->supported_bands = SUPPORT_BAND_2GHZ;
2561         spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
2562
2563         if (!test_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags)) {
2564                 spec->num_channels = 14;
2565                 spec->channels = rf_vals_noseq;
2566         } else {
2567                 spec->num_channels = 14;
2568                 spec->channels = rf_vals_seq;
2569         }
2570
2571         if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
2572             rt2x00_rf(&rt2x00dev->chip, RF5325)) {
2573                 spec->supported_bands |= SUPPORT_BAND_5GHZ;
2574                 spec->num_channels = ARRAY_SIZE(rf_vals_seq);
2575         }
2576
2577         /*
2578          * Create channel information array
2579          */
2580         info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
2581         if (!info)
2582                 return -ENOMEM;
2583
2584         spec->channels_info = info;
2585
2586         tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
2587         for (i = 0; i < 14; i++)
2588                 info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
2589
2590         if (spec->num_channels > 14) {
2591                 tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
2592                 for (i = 14; i < spec->num_channels; i++)
2593                         info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
2594         }
2595
2596         return 0;
2597 }
2598
2599 static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
2600 {
2601         int retval;
2602
2603         /*
2604          * Disable power saving.
2605          */
2606         rt2x00pci_register_write(rt2x00dev, SOFT_RESET_CSR, 0x00000007);
2607
2608         /*
2609          * Allocate eeprom data.
2610          */
2611         retval = rt61pci_validate_eeprom(rt2x00dev);
2612         if (retval)
2613                 return retval;
2614
2615         retval = rt61pci_init_eeprom(rt2x00dev);
2616         if (retval)
2617                 return retval;
2618
2619         /*
2620          * Initialize hw specifications.
2621          */
2622         retval = rt61pci_probe_hw_mode(rt2x00dev);
2623         if (retval)
2624                 return retval;
2625
2626         /*
2627          * This device has multiple filters for control frames,
2628          * but has no a separate filter for PS Poll frames.
2629          */
2630         __set_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags);
2631
2632         /*
2633          * This device requires firmware and DMA mapped skbs.
2634          */
2635         __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
2636         __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
2637         if (!modparam_nohwcrypt)
2638                 __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
2639
2640         /*
2641          * Set the rssi offset.
2642          */
2643         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
2644
2645         return 0;
2646 }
2647
2648 /*
2649  * IEEE80211 stack callback functions.
2650  */
2651 static int rt61pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
2652                            const struct ieee80211_tx_queue_params *params)
2653 {
2654         struct rt2x00_dev *rt2x00dev = hw->priv;
2655         struct data_queue *queue;
2656         struct rt2x00_field32 field;
2657         int retval;
2658         u32 reg;
2659         u32 offset;
2660
2661         /*
2662          * First pass the configuration through rt2x00lib, that will
2663          * update the queue settings and validate the input. After that
2664          * we are free to update the registers based on the value
2665          * in the queue parameter.
2666          */
2667         retval = rt2x00mac_conf_tx(hw, queue_idx, params);
2668         if (retval)
2669                 return retval;
2670
2671         /*
2672          * We only need to perform additional register initialization
2673          * for WMM queues/
2674          */
2675         if (queue_idx >= 4)
2676                 return 0;
2677
2678         queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
2679
2680         /* Update WMM TXOP register */
2681         offset = AC_TXOP_CSR0 + (sizeof(u32) * (!!(queue_idx & 2)));
2682         field.bit_offset = (queue_idx & 1) * 16;
2683         field.bit_mask = 0xffff << field.bit_offset;
2684
2685         rt2x00pci_register_read(rt2x00dev, offset, &reg);
2686         rt2x00_set_field32(&reg, field, queue->txop);
2687         rt2x00pci_register_write(rt2x00dev, offset, reg);
2688
2689         /* Update WMM registers */
2690         field.bit_offset = queue_idx * 4;
2691         field.bit_mask = 0xf << field.bit_offset;
2692
2693         rt2x00pci_register_read(rt2x00dev, AIFSN_CSR, &reg);
2694         rt2x00_set_field32(&reg, field, queue->aifs);
2695         rt2x00pci_register_write(rt2x00dev, AIFSN_CSR, reg);
2696
2697         rt2x00pci_register_read(rt2x00dev, CWMIN_CSR, &reg);
2698         rt2x00_set_field32(&reg, field, queue->cw_min);
2699         rt2x00pci_register_write(rt2x00dev, CWMIN_CSR, reg);
2700
2701         rt2x00pci_register_read(rt2x00dev, CWMAX_CSR, &reg);
2702         rt2x00_set_field32(&reg, field, queue->cw_max);
2703         rt2x00pci_register_write(rt2x00dev, CWMAX_CSR, reg);
2704
2705         return 0;
2706 }
2707
2708 static u64 rt61pci_get_tsf(struct ieee80211_hw *hw)
2709 {
2710         struct rt2x00_dev *rt2x00dev = hw->priv;
2711         u64 tsf;
2712         u32 reg;
2713
2714         rt2x00pci_register_read(rt2x00dev, TXRX_CSR13, &reg);
2715         tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32;
2716         rt2x00pci_register_read(rt2x00dev, TXRX_CSR12, &reg);
2717         tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER);
2718
2719         return tsf;
2720 }
2721
2722 static const struct ieee80211_ops rt61pci_mac80211_ops = {
2723         .tx                     = rt2x00mac_tx,
2724         .start                  = rt2x00mac_start,
2725         .stop                   = rt2x00mac_stop,
2726         .add_interface          = rt2x00mac_add_interface,
2727         .remove_interface       = rt2x00mac_remove_interface,
2728         .config                 = rt2x00mac_config,
2729         .configure_filter       = rt2x00mac_configure_filter,
2730         .set_tim                = rt2x00mac_set_tim,
2731         .set_key                = rt2x00mac_set_key,
2732         .get_stats              = rt2x00mac_get_stats,
2733         .bss_info_changed       = rt2x00mac_bss_info_changed,
2734         .conf_tx                = rt61pci_conf_tx,
2735         .get_tx_stats           = rt2x00mac_get_tx_stats,
2736         .get_tsf                = rt61pci_get_tsf,
2737         .rfkill_poll            = rt2x00mac_rfkill_poll,
2738 };
2739
2740 static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
2741         .irq_handler            = rt61pci_interrupt,
2742         .probe_hw               = rt61pci_probe_hw,
2743         .get_firmware_name      = rt61pci_get_firmware_name,
2744         .check_firmware         = rt61pci_check_firmware,
2745         .load_firmware          = rt61pci_load_firmware,
2746         .initialize             = rt2x00pci_initialize,
2747         .uninitialize           = rt2x00pci_uninitialize,
2748         .get_entry_state        = rt61pci_get_entry_state,
2749         .clear_entry            = rt61pci_clear_entry,
2750         .set_device_state       = rt61pci_set_device_state,
2751         .rfkill_poll            = rt61pci_rfkill_poll,
2752         .link_stats             = rt61pci_link_stats,
2753         .reset_tuner            = rt61pci_reset_tuner,
2754         .link_tuner             = rt61pci_link_tuner,
2755         .write_tx_desc          = rt61pci_write_tx_desc,
2756         .write_tx_data          = rt2x00pci_write_tx_data,
2757         .write_beacon           = rt61pci_write_beacon,
2758         .kick_tx_queue          = rt61pci_kick_tx_queue,
2759         .kill_tx_queue          = rt61pci_kill_tx_queue,
2760         .fill_rxdone            = rt61pci_fill_rxdone,
2761         .config_shared_key      = rt61pci_config_shared_key,
2762         .config_pairwise_key    = rt61pci_config_pairwise_key,
2763         .config_filter          = rt61pci_config_filter,
2764         .config_intf            = rt61pci_config_intf,
2765         .config_erp             = rt61pci_config_erp,
2766         .config_ant             = rt61pci_config_ant,
2767         .config                 = rt61pci_config,
2768 };
2769
2770 static const struct data_queue_desc rt61pci_queue_rx = {
2771         .entry_num              = RX_ENTRIES,
2772         .data_size              = DATA_FRAME_SIZE,
2773         .desc_size              = RXD_DESC_SIZE,
2774         .priv_size              = sizeof(struct queue_entry_priv_pci),
2775 };
2776
2777 static const struct data_queue_desc rt61pci_queue_tx = {
2778         .entry_num              = TX_ENTRIES,
2779         .data_size              = DATA_FRAME_SIZE,
2780         .desc_size              = TXD_DESC_SIZE,
2781         .priv_size              = sizeof(struct queue_entry_priv_pci),
2782 };
2783
2784 static const struct data_queue_desc rt61pci_queue_bcn = {
2785         .entry_num              = 4 * BEACON_ENTRIES,
2786         .data_size              = 0, /* No DMA required for beacons */
2787         .desc_size              = TXINFO_SIZE,
2788         .priv_size              = sizeof(struct queue_entry_priv_pci),
2789 };
2790
2791 static const struct rt2x00_ops rt61pci_ops = {
2792         .name           = KBUILD_MODNAME,
2793         .max_sta_intf   = 1,
2794         .max_ap_intf    = 4,
2795         .eeprom_size    = EEPROM_SIZE,
2796         .rf_size        = RF_SIZE,
2797         .tx_queues      = NUM_TX_QUEUES,
2798         .rx             = &rt61pci_queue_rx,
2799         .tx             = &rt61pci_queue_tx,
2800         .bcn            = &rt61pci_queue_bcn,
2801         .lib            = &rt61pci_rt2x00_ops,
2802         .hw             = &rt61pci_mac80211_ops,
2803 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
2804         .debugfs        = &rt61pci_rt2x00debug,
2805 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
2806 };
2807
2808 /*
2809  * RT61pci module information.
2810  */
2811 static struct pci_device_id rt61pci_device_table[] = {
2812         /* RT2561s */
2813         { PCI_DEVICE(0x1814, 0x0301), PCI_DEVICE_DATA(&rt61pci_ops) },
2814         /* RT2561 v2 */
2815         { PCI_DEVICE(0x1814, 0x0302), PCI_DEVICE_DATA(&rt61pci_ops) },
2816         /* RT2661 */
2817         { PCI_DEVICE(0x1814, 0x0401), PCI_DEVICE_DATA(&rt61pci_ops) },
2818         { 0, }
2819 };
2820
2821 MODULE_AUTHOR(DRV_PROJECT);
2822 MODULE_VERSION(DRV_VERSION);
2823 MODULE_DESCRIPTION("Ralink RT61 PCI & PCMCIA Wireless LAN driver.");
2824 MODULE_SUPPORTED_DEVICE("Ralink RT2561, RT2561s & RT2661 "
2825                         "PCI & PCMCIA chipset based cards");
2826 MODULE_DEVICE_TABLE(pci, rt61pci_device_table);
2827 MODULE_FIRMWARE(FIRMWARE_RT2561);
2828 MODULE_FIRMWARE(FIRMWARE_RT2561s);
2829 MODULE_FIRMWARE(FIRMWARE_RT2661);
2830 MODULE_LICENSE("GPL");
2831
2832 static struct pci_driver rt61pci_driver = {
2833         .name           = KBUILD_MODNAME,
2834         .id_table       = rt61pci_device_table,
2835         .probe          = rt2x00pci_probe,
2836         .remove         = __devexit_p(rt2x00pci_remove),
2837         .suspend        = rt2x00pci_suspend,
2838         .resume         = rt2x00pci_resume,
2839 };
2840
2841 static int __init rt61pci_init(void)
2842 {
2843         return pci_register_driver(&rt61pci_driver);
2844 }
2845
2846 static void __exit rt61pci_exit(void)
2847 {
2848         pci_unregister_driver(&rt61pci_driver);
2849 }
2850
2851 module_init(rt61pci_init);
2852 module_exit(rt61pci_exit);