drivers/net/wireless/rt2x00/rt2x00dev.c

   1 /*
   2         Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
   3         <http://rt2x00.serialmonkey.com>
   4
   5         This program is free software; you can redistribute it and/or modify
   6         it under the terms of the GNU General Public License as published by
   7         the Free Software Foundation; either version 2 of the License, or
   8         (at your option) any later version.
   9
  10         This program is distributed in the hope that it will be useful,
  11         but WITHOUT ANY WARRANTY; without even the implied warranty of
  12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13         GNU General Public License for more details.
  14
  15         You should have received a copy of the GNU General Public License
  16         along with this program; if not, write to the
  17         Free Software Foundation, Inc.,
  18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  19  */
  20
  21 /*
  22         Module: rt2x00lib
  23         Abstract: rt2x00 generic device routines.
  24  */
  25
  26 #include <linux/kernel.h>
  27 #include <linux/module.h>
  28
  29 #include "rt2x00.h"
  30 #include "rt2x00lib.h"
  31
  32 /*
  33  * Radio control handlers.
  34  */
  35 int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
  36 {
  37         int status;
  38
  39         /*
  40          * Don't enable the radio twice.
  41          * And check if the hardware button has been disabled.
  42          */
  43         if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
  44                 return 0;
  45
  46         /*
  47          * Initialize all data queues.
  48          */
  49         rt2x00queue_init_queues(rt2x00dev);
  50
  51         /*
  52          * Enable radio.
  53          */
  54         status =
  55             rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_ON);
  56         if (status)
  57                 return status;
  58
  59         rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_ON);
  60
  61         rt2x00leds_led_radio(rt2x00dev, true);
  62         rt2x00led_led_activity(rt2x00dev, true);
  63
  64         set_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags);
  65
  66         /*
  67          * Enable RX.
  68          */
  69         rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
  70
  71         /*
  72          * Start the TX queues.
  73          */
  74         ieee80211_wake_queues(rt2x00dev->hw);
  75
  76         return 0;
  77 }
  78
  79 void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
  80 {
  81         if (!test_and_clear_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
  82                 return;
  83
  84         /*
  85          * Stop the TX queues in mac80211.
  86          */
  87         ieee80211_stop_queues(rt2x00dev->hw);
  88         rt2x00queue_stop_queues(rt2x00dev);
  89
  90         /*
  91          * Disable RX.
  92          */
  93         rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
  94
  95         /*
  96          * Disable radio.
  97          */
  98         rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF);
  99         rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF);
 100         rt2x00led_led_activity(rt2x00dev, false);
 101         rt2x00leds_led_radio(rt2x00dev, false);
 102 }
 103
 104 void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state)
 105 {
 106         /*
 107          * When we are disabling the RX, we should also stop the link tuner.
 108          */
 109         if (state == STATE_RADIO_RX_OFF)
 110                 rt2x00link_stop_tuner(rt2x00dev);
 111
 112         rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
 113
 114         /*
 115          * When we are enabling the RX, we should also start the link tuner.
 116          */
 117         if (state == STATE_RADIO_RX_ON)
 118                 rt2x00link_start_tuner(rt2x00dev);
 119 }
 120
 121 static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
 122                                           struct ieee80211_vif *vif)
 123 {
 124         struct rt2x00_dev *rt2x00dev = data;
 125         struct rt2x00_intf *intf = vif_to_intf(vif);
 126         int delayed_flags;
 127
 128         /*
 129          * Copy all data we need during this action under the protection
 130          * of a spinlock. Otherwise race conditions might occur which results
 131          * into an invalid configuration.
 132          */
 133         spin_lock(&intf->lock);
 134
 135         delayed_flags = intf->delayed_flags;
 136         intf->delayed_flags = 0;
 137
 138         spin_unlock(&intf->lock);
 139
 140         /*
 141          * It is possible the radio was disabled while the work had been
 142          * scheduled. If that happens we should return here immediately,
 143          * note that in the spinlock protected area above the delayed_flags
 144          * have been cleared correctly.
 145          */
 146         if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 147                 return;
 148
 149         if (delayed_flags & DELAYED_UPDATE_BEACON)
 150                 rt2x00queue_update_beacon(rt2x00dev, vif, true);
 151 }
 152
 153 static void rt2x00lib_intf_scheduled(struct work_struct *work)
 154 {
 155         struct rt2x00_dev *rt2x00dev =
 156             container_of(work, struct rt2x00_dev, intf_work);
 157
 158         /*
 159          * Iterate over each interface and perform the
 160          * requested configurations.
 161          */
 162         ieee80211_iterate_active_interfaces(rt2x00dev->hw,
 163                                             rt2x00lib_intf_scheduled_iter,
 164                                             rt2x00dev);
 165 }
 166
 167 /*
 168  * Interrupt context handlers.
 169  */
 170 static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
 171                                       struct ieee80211_vif *vif)
 172 {
 173         struct rt2x00_intf *intf = vif_to_intf(vif);
 174
 175         if (vif->type != NL80211_IFTYPE_AP &&
 176             vif->type != NL80211_IFTYPE_ADHOC &&
 177             vif->type != NL80211_IFTYPE_MESH_POINT &&
 178             vif->type != NL80211_IFTYPE_WDS)
 179                 return;
 180
 181         spin_lock(&intf->lock);
 182         intf->delayed_flags |= DELAYED_UPDATE_BEACON;
 183         spin_unlock(&intf->lock);
 184 }
 185
 186 void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
 187 {
 188         if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 189                 return;
 190
 191         ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw,
 192                                                    rt2x00lib_beacondone_iter,
 193                                                    rt2x00dev);
 194
 195         ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->intf_work);
 196 }
 197 EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
 198
 199 void rt2x00lib_txdone(struct queue_entry *entry,
 200                       struct txdone_entry_desc *txdesc)
 201 {
 202         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 203         struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
 204         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 205         enum data_queue_qid qid = skb_get_queue_mapping(entry->skb);
 206         unsigned int header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
 207         u8 rate_idx, rate_flags, retry_rates;
 208         unsigned int i;
 209         bool success;
 210
 211         /*
 212          * Unmap the skb.
 213          */
 214         rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
 215
 216         /*
 217          * Remove L2 padding which was added during
 218          */
 219         if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags))
 220                 rt2x00queue_remove_l2pad(entry->skb, header_length);
 221
 222         /*
 223          * If the IV/EIV data was stripped from the frame before it was
 224          * passed to the hardware, we should now reinsert it again because
 225          * mac80211 will expect the the same data to be present it the
 226          * frame as it was passed to us.
 227          */
 228         if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
 229                 rt2x00crypto_tx_insert_iv(entry->skb, header_length);
 230
 231         /*
 232          * Send frame to debugfs immediately, after this call is completed
 233          * we are going to overwrite the skb->cb array.
 234          */
 235         rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry->skb);
 236
 237         /*
 238          * Determine if the frame has been successfully transmitted.
 239          */
 240         success =
 241             test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
 242             test_bit(TXDONE_UNKNOWN, &txdesc->flags) ||
 243             test_bit(TXDONE_FALLBACK, &txdesc->flags);
 244
 245         /*
 246          * Update TX statistics.
 247          */
 248         rt2x00dev->link.qual.tx_success += success;
 249         rt2x00dev->link.qual.tx_failed += !success;
 250
 251         rate_idx = skbdesc->tx_rate_idx;
 252         rate_flags = skbdesc->tx_rate_flags;
 253         retry_rates = test_bit(TXDONE_FALLBACK, &txdesc->flags) ?
 254             (txdesc->retry + 1) : 1;
 255
 256         /*
 257          * Initialize TX status
 258          */
 259         memset(&tx_info->status, 0, sizeof(tx_info->status));
 260         tx_info->status.ack_signal = 0;
 261
 262         /*
 263          * Frame was send with retries, hardware tried
 264          * different rates to send out the frame, at each
 265          * retry it lowered the rate 1 step.
 266          */
 267         for (i = 0; i < retry_rates && i < IEEE80211_TX_MAX_RATES; i++) {
 268                 tx_info->status.rates[i].idx = rate_idx - i;
 269                 tx_info->status.rates[i].flags = rate_flags;
 270                 tx_info->status.rates[i].count = 1;
 271         }
 272         if (i < (IEEE80211_TX_MAX_RATES - 1))
 273                 tx_info->status.rates[i].idx = -1; /* terminate */
 274
 275         if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
 276                 if (success)
 277                         tx_info->flags |= IEEE80211_TX_STAT_ACK;
 278                 else
 279                         rt2x00dev->low_level_stats.dot11ACKFailureCount++;
 280         }
 281
 282         if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
 283                 if (success)
 284                         rt2x00dev->low_level_stats.dot11RTSSuccessCount++;
 285                 else
 286                         rt2x00dev->low_level_stats.dot11RTSFailureCount++;
 287         }
 288
 289         /*
 290          * Only send the status report to mac80211 when TX status was
 291          * requested by it. If this was a extra frame coming through
 292          * a mac80211 library call (RTS/CTS) then we should not send the
 293          * status report back.
 294          */
 295         if (tx_info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS)
 296                 ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb);
 297         else
 298                 dev_kfree_skb_irq(entry->skb);
 299
 300         /*
 301          * Make this entry available for reuse.
 302          */
 303         entry->skb = NULL;
 304         entry->flags = 0;
 305
 306         rt2x00dev->ops->lib->clear_entry(entry);
 307
 308         clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
 309         rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
 310
 311         /*
 312          * If the data queue was below the threshold before the txdone
 313          * handler we must make sure the packet queue in the mac80211 stack
 314          * is reenabled when the txdone handler has finished.
 315          */
 316         if (!rt2x00queue_threshold(entry->queue))
 317                 ieee80211_wake_queue(rt2x00dev->hw, qid);
 318 }
 319 EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
 320
 321 static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
 322                                         struct rxdone_entry_desc *rxdesc)
 323 {
 324         struct ieee80211_supported_band *sband;
 325         const struct rt2x00_rate *rate;
 326         unsigned int i;
 327         int signal;
 328         int type;
 329
 330         /*
 331          * For non-HT rates the MCS value needs to contain the
 332          * actually used rate modulation (CCK or OFDM).
 333          */
 334         if (rxdesc->dev_flags & RXDONE_SIGNAL_MCS)
 335                 signal = RATE_MCS(rxdesc->rate_mode, rxdesc->signal);
 336         else
 337                 signal = rxdesc->signal;
 338
 339         type = (rxdesc->dev_flags & RXDONE_SIGNAL_MASK);
 340
 341         sband = &rt2x00dev->bands[rt2x00dev->curr_band];
 342         for (i = 0; i < sband->n_bitrates; i++) {
 343                 rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
 344
 345                 if (((type == RXDONE_SIGNAL_PLCP) &&
 346                      (rate->plcp == signal)) ||
 347                     ((type == RXDONE_SIGNAL_BITRATE) &&
 348                       (rate->bitrate == signal)) ||
 349                     ((type == RXDONE_SIGNAL_MCS) &&
 350                       (rate->mcs == signal))) {
 351                         return i;
 352                 }
 353         }
 354
 355         WARNING(rt2x00dev, "Frame received with unrecognized signal, "
 356                 "signal=0x%.4x, type=%d.\n", signal, type);
 357         return 0;
 358 }
 359
 360 void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 361                       struct queue_entry *entry)
 362 {
 363         struct rxdone_entry_desc rxdesc;
 364         struct sk_buff *skb;
 365         struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status;
 366         unsigned int header_length;
 367         int rate_idx;
 368         /*
 369          * Allocate a new sk_buffer. If no new buffer available, drop the
 370          * received frame and reuse the existing buffer.
 371          */
 372         skb = rt2x00queue_alloc_rxskb(rt2x00dev, entry);
 373         if (!skb)
 374                 return;
 375
 376         /*
 377          * Unmap the skb.
 378          */
 379         rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
 380
 381         /*
 382          * Extract the RXD details.
 383          */
 384         memset(&rxdesc, 0, sizeof(rxdesc));
 385         rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc);
 386
 387         /* Trim buffer to correct size */
 388         skb_trim(entry->skb, rxdesc.size);
 389
 390         /*
 391          * The data behind the ieee80211 header must be
 392          * aligned on a 4 byte boundary.
 393          */
 394         header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
 395
 396         /*
 397          * Hardware might have stripped the IV/EIV/ICV data,
 398          * in that case it is possible that the data was
 399          * provided seperately (through hardware descriptor)
 400          * in which case we should reinsert the data into the frame.
 401          */
 402         if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) &&
 403             (rxdesc.flags & RX_FLAG_IV_STRIPPED))
 404                 rt2x00crypto_rx_insert_iv(entry->skb, header_length,
 405                                           &rxdesc);
 406         else if (rxdesc.dev_flags & RXDONE_L2PAD)
 407                 rt2x00queue_remove_l2pad(entry->skb, header_length);
 408         else
 409                 rt2x00queue_align_payload(entry->skb, header_length);
 410
 411         /*
 412          * Check if the frame was received using HT. In that case,
 413          * the rate is the MCS index and should be passed to mac80211
 414          * directly. Otherwise we need to translate the signal to
 415          * the correct bitrate index.
 416          */
 417         if (rxdesc.rate_mode == RATE_MODE_CCK ||
 418             rxdesc.rate_mode == RATE_MODE_OFDM) {
 419                 rate_idx = rt2x00lib_rxdone_read_signal(rt2x00dev, &rxdesc);
 420         } else {
 421                 rxdesc.flags |= RX_FLAG_HT;
 422                 rate_idx = rxdesc.signal;
 423         }
 424
 425         /*
 426          * Update extra components
 427          */
 428         rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc);
 429         rt2x00debug_update_crypto(rt2x00dev, &rxdesc);
 430
 431         rx_status->mactime = rxdesc.timestamp;
 432         rx_status->rate_idx = rate_idx;
 433         rx_status->signal = rxdesc.rssi;
 434         rx_status->noise = rxdesc.noise;
 435         rx_status->flag = rxdesc.flags;
 436         rx_status->antenna = rt2x00dev->link.ant.active.rx;
 437
 438         /*
 439          * Send frame to mac80211 & debugfs.
 440          * mac80211 will clean up the skb structure.
 441          */
 442         rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
 443         memcpy(IEEE80211_SKB_RXCB(entry->skb), rx_status, sizeof(*rx_status));
 444         ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb);
 445
 446         /*
 447          * Replace the skb with the freshly allocated one.
 448          */
 449         entry->skb = skb;
 450         entry->flags = 0;
 451
 452         rt2x00dev->ops->lib->clear_entry(entry);
 453
 454         rt2x00queue_index_inc(entry->queue, Q_INDEX);
 455 }
 456 EXPORT_SYMBOL_GPL(rt2x00lib_rxdone);
 457
 458 /*
 459  * Driver initialization handlers.
 460  */
 461 const struct rt2x00_rate rt2x00_supported_rates[12] = {
 462         {
 463                 .flags = DEV_RATE_CCK,
 464                 .bitrate = 10,
 465                 .ratemask = BIT(0),
 466                 .plcp = 0x00,
 467                 .mcs = RATE_MCS(RATE_MODE_CCK, 0),
 468         },
 469         {
 470                 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
 471                 .bitrate = 20,
 472                 .ratemask = BIT(1),
 473                 .plcp = 0x01,
 474                 .mcs = RATE_MCS(RATE_MODE_CCK, 1),
 475         },
 476         {
 477                 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
 478                 .bitrate = 55,
 479                 .ratemask = BIT(2),
 480                 .plcp = 0x02,
 481                 .mcs = RATE_MCS(RATE_MODE_CCK, 2),
 482         },
 483         {
 484                 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
 485                 .bitrate = 110,
 486                 .ratemask = BIT(3),
 487                 .plcp = 0x03,
 488                 .mcs = RATE_MCS(RATE_MODE_CCK, 3),
 489         },
 490         {
 491                 .flags = DEV_RATE_OFDM,
 492                 .bitrate = 60,
 493                 .ratemask = BIT(4),
 494                 .plcp = 0x0b,
 495                 .mcs = RATE_MCS(RATE_MODE_OFDM, 0),
 496         },
 497         {
 498                 .flags = DEV_RATE_OFDM,
 499                 .bitrate = 90,
 500                 .ratemask = BIT(5),
 501                 .plcp = 0x0f,
 502                 .mcs = RATE_MCS(RATE_MODE_OFDM, 1),
 503         },
 504         {
 505                 .flags = DEV_RATE_OFDM,
 506                 .bitrate = 120,
 507                 .ratemask = BIT(6),
 508                 .plcp = 0x0a,
 509                 .mcs = RATE_MCS(RATE_MODE_OFDM, 2),
 510         },
 511         {
 512                 .flags = DEV_RATE_OFDM,
 513                 .bitrate = 180,
 514                 .ratemask = BIT(7),
 515                 .plcp = 0x0e,
 516                 .mcs = RATE_MCS(RATE_MODE_OFDM, 3),
 517         },
 518         {
 519                 .flags = DEV_RATE_OFDM,
 520                 .bitrate = 240,
 521                 .ratemask = BIT(8),
 522                 .plcp = 0x09,
 523                 .mcs = RATE_MCS(RATE_MODE_OFDM, 4),
 524         },
 525         {
 526                 .flags = DEV_RATE_OFDM,
 527                 .bitrate = 360,
 528                 .ratemask = BIT(9),
 529                 .plcp = 0x0d,
 530                 .mcs = RATE_MCS(RATE_MODE_OFDM, 5),
 531         },
 532         {
 533                 .flags = DEV_RATE_OFDM,
 534                 .bitrate = 480,
 535                 .ratemask = BIT(10),
 536                 .plcp = 0x08,
 537                 .mcs = RATE_MCS(RATE_MODE_OFDM, 6),
 538         },
 539         {
 540                 .flags = DEV_RATE_OFDM,
 541                 .bitrate = 540,
 542                 .ratemask = BIT(11),
 543                 .plcp = 0x0c,
 544                 .mcs = RATE_MCS(RATE_MODE_OFDM, 7),
 545         },
 546 };
 547
 548 static void rt2x00lib_channel(struct ieee80211_channel *entry,
 549                               const int channel, const int tx_power,
 550                               const int value)
 551 {
 552         entry->center_freq = ieee80211_channel_to_frequency(channel);
 553         entry->hw_value = value;
 554         entry->max_power = tx_power;
 555         entry->max_antenna_gain = 0xff;
 556 }
 557
 558 static void rt2x00lib_rate(struct ieee80211_rate *entry,
 559                            const u16 index, const struct rt2x00_rate *rate)
 560 {
 561         entry->flags = 0;
 562         entry->bitrate = rate->bitrate;
 563         entry->hw_value =index;
 564         entry->hw_value_short = index;
 565
 566         if (rate->flags & DEV_RATE_SHORT_PREAMBLE)
 567                 entry->flags |= IEEE80211_RATE_SHORT_PREAMBLE;
 568 }
 569
 570 static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
 571                                     struct hw_mode_spec *spec)
 572 {
 573         struct ieee80211_hw *hw = rt2x00dev->hw;
 574         struct ieee80211_channel *channels;
 575         struct ieee80211_rate *rates;
 576         unsigned int num_rates;
 577         unsigned int i;
 578
 579         num_rates = 0;
 580         if (spec->supported_rates & SUPPORT_RATE_CCK)
 581                 num_rates += 4;
 582         if (spec->supported_rates & SUPPORT_RATE_OFDM)
 583                 num_rates += 8;
 584
 585         channels = kzalloc(sizeof(*channels) * spec->num_channels, GFP_KERNEL);
 586         if (!channels)
 587                 return -ENOMEM;
 588
 589         rates = kzalloc(sizeof(*rates) * num_rates, GFP_KERNEL);
 590         if (!rates)
 591                 goto exit_free_channels;
 592
 593         /*
 594          * Initialize Rate list.
 595          */
 596         for (i = 0; i < num_rates; i++)
 597                 rt2x00lib_rate(&rates[i], i, rt2x00_get_rate(i));
 598
 599         /*
 600          * Initialize Channel list.
 601          */
 602         for (i = 0; i < spec->num_channels; i++) {
 603                 rt2x00lib_channel(&channels[i],
 604                                   spec->channels[i].channel,
 605                                   spec->channels_info[i].tx_power1, i);
 606         }
 607
 608         /*
 609          * Intitialize 802.11b, 802.11g
 610          * Rates: CCK, OFDM.
 611          * Channels: 2.4 GHz
 612          */
 613         if (spec->supported_bands & SUPPORT_BAND_2GHZ) {
 614                 rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_channels = 14;
 615                 rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_bitrates = num_rates;
 616                 rt2x00dev->bands[IEEE80211_BAND_2GHZ].channels = channels;
 617                 rt2x00dev->bands[IEEE80211_BAND_2GHZ].bitrates = rates;
 618                 hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
 619                     &rt2x00dev->bands[IEEE80211_BAND_2GHZ];
 620                 memcpy(&rt2x00dev->bands[IEEE80211_BAND_2GHZ].ht_cap,
 621                        &spec->ht, sizeof(spec->ht));
 622         }
 623
 624         /*
 625          * Intitialize 802.11a
 626          * Rates: OFDM.
 627          * Channels: OFDM, UNII, HiperLAN2.
 628          */
 629         if (spec->supported_bands & SUPPORT_BAND_5GHZ) {
 630                 rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_channels =
 631                     spec->num_channels - 14;
 632                 rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_bitrates =
 633                     num_rates - 4;
 634                 rt2x00dev->bands[IEEE80211_BAND_5GHZ].channels = &channels[14];
 635                 rt2x00dev->bands[IEEE80211_BAND_5GHZ].bitrates = &rates[4];
 636                 hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
 637                     &rt2x00dev->bands[IEEE80211_BAND_5GHZ];
 638                 memcpy(&rt2x00dev->bands[IEEE80211_BAND_5GHZ].ht_cap,
 639                        &spec->ht, sizeof(spec->ht));
 640         }
 641
 642         return 0;
 643
 644  exit_free_channels:
 645         kfree(channels);
 646         ERROR(rt2x00dev, "Allocation ieee80211 modes failed.\n");
 647         return -ENOMEM;
 648 }
 649
 650 static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
 651 {
 652         if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
 653                 ieee80211_unregister_hw(rt2x00dev->hw);
 654
 655         if (likely(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ])) {
 656                 kfree(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
 657                 kfree(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->bitrates);
 658                 rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
 659                 rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
 660         }
 661
 662         kfree(rt2x00dev->spec.channels_info);
 663 }
 664
 665 static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
 666 {
 667         struct hw_mode_spec *spec = &rt2x00dev->spec;
 668         int status;
 669
 670         if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
 671                 return 0;
 672
 673         /*
 674          * Initialize HW modes.
 675          */
 676         status = rt2x00lib_probe_hw_modes(rt2x00dev, spec);
 677         if (status)
 678                 return status;
 679
 680         /*
 681          * Initialize HW fields.
 682          */
 683         rt2x00dev->hw->queues = rt2x00dev->ops->tx_queues;
 684
 685         /*
 686          * Register HW.
 687          */
 688         status = ieee80211_register_hw(rt2x00dev->hw);
 689         if (status)
 690                 return status;
 691
 692         set_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags);
 693
 694         return 0;
 695 }
 696
 697 /*
 698  * Initialization/uninitialization handlers.
 699  */
 700 static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev)
 701 {
 702         if (!test_and_clear_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags))
 703                 return;
 704
 705         /*
 706          * Unregister extra components.
 707          */
 708         rt2x00rfkill_unregister(rt2x00dev);
 709
 710         /*
 711          * Allow the HW to uninitialize.
 712          */
 713         rt2x00dev->ops->lib->uninitialize(rt2x00dev);
 714
 715         /*
 716          * Free allocated queue entries.
 717          */
 718         rt2x00queue_uninitialize(rt2x00dev);
 719 }
 720
 721 static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
 722 {
 723         int status;
 724
 725         if (test_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags))
 726                 return 0;
 727
 728         /*
 729          * Allocate all queue entries.
 730          */
 731         status = rt2x00queue_initialize(rt2x00dev);
 732         if (status)
 733                 return status;
 734
 735         /*
 736          * Initialize the device.
 737          */
 738         status = rt2x00dev->ops->lib->initialize(rt2x00dev);
 739         if (status) {
 740                 rt2x00queue_uninitialize(rt2x00dev);
 741                 return status;
 742         }
 743
 744         set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags);
 745
 746         /*
 747          * Register the extra components.
 748          */
 749         rt2x00rfkill_register(rt2x00dev);
 750
 751         return 0;
 752 }
 753
 754 int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
 755 {
 756         int retval;
 757
 758         if (test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
 759                 return 0;
 760
 761         /*
 762          * If this is the first interface which is added,
 763          * we should load the firmware now.
 764          */
 765         retval = rt2x00lib_load_firmware(rt2x00dev);
 766         if (retval)
 767                 return retval;
 768
 769         /*
 770          * Initialize the device.
 771          */
 772         retval = rt2x00lib_initialize(rt2x00dev);
 773         if (retval)
 774                 return retval;
 775
 776         rt2x00dev->intf_ap_count = 0;
 777         rt2x00dev->intf_sta_count = 0;
 778         rt2x00dev->intf_associated = 0;
 779
 780         /* Enable the radio */
 781         retval = rt2x00lib_enable_radio(rt2x00dev);
 782         if (retval) {
 783                 rt2x00queue_uninitialize(rt2x00dev);
 784                 return retval;
 785         }
 786
 787         set_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags);
 788
 789         return 0;
 790 }
 791
 792 void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev)
 793 {
 794         if (!test_and_clear_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
 795                 return;
 796
 797         /*
 798          * Perhaps we can add something smarter here,
 799          * but for now just disabling the radio should do.
 800          */
 801         rt2x00lib_disable_radio(rt2x00dev);
 802
 803         rt2x00dev->intf_ap_count = 0;
 804         rt2x00dev->intf_sta_count = 0;
 805         rt2x00dev->intf_associated = 0;
 806 }
 807
 808 /*
 809  * driver allocation handlers.
 810  */
 811 int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
 812 {
 813         int retval = -ENOMEM;
 814
 815         mutex_init(&rt2x00dev->csr_mutex);
 816
 817         set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
 818
 819         /*
 820          * Make room for rt2x00_intf inside the per-interface
 821          * structure ieee80211_vif.
 822          */
 823         rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf);
 824
 825         /*
 826          * Determine which operating modes are supported, all modes
 827          * which require beaconing, depend on the availability of
 828          * beacon entries.
 829          */
 830         rt2x00dev->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 831         if (rt2x00dev->ops->bcn->entry_num > 0)
 832                 rt2x00dev->hw->wiphy->interface_modes |=
 833                     BIT(NL80211_IFTYPE_ADHOC) |
 834                     BIT(NL80211_IFTYPE_AP) |
 835                     BIT(NL80211_IFTYPE_MESH_POINT) |
 836                     BIT(NL80211_IFTYPE_WDS);
 837
 838         /*
 839          * Let the driver probe the device to detect the capabilities.
 840          */
 841         retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev);
 842         if (retval) {
 843                 ERROR(rt2x00dev, "Failed to allocate device.\n");
 844                 goto exit;
 845         }
 846
 847         /*
 848          * Initialize configuration work.
 849          */
 850         INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
 851
 852         /*
 853          * Allocate queue array.
 854          */
 855         retval = rt2x00queue_allocate(rt2x00dev);
 856         if (retval)
 857                 goto exit;
 858
 859         /*
 860          * Initialize ieee80211 structure.
 861          */
 862         retval = rt2x00lib_probe_hw(rt2x00dev);
 863         if (retval) {
 864                 ERROR(rt2x00dev, "Failed to initialize hw.\n");
 865                 goto exit;
 866         }
 867
 868         /*
 869          * Register extra components.
 870          */
 871         rt2x00link_register(rt2x00dev);
 872         rt2x00leds_register(rt2x00dev);
 873         rt2x00debug_register(rt2x00dev);
 874
 875         return 0;
 876
 877 exit:
 878         rt2x00lib_remove_dev(rt2x00dev);
 879
 880         return retval;
 881 }
 882 EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev);
 883
 884 void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
 885 {
 886         clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
 887
 888         /*
 889          * Disable radio.
 890          */
 891         rt2x00lib_disable_radio(rt2x00dev);
 892
 893         /*
 894          * Stop all work.
 895          */
 896         cancel_work_sync(&rt2x00dev->intf_work);
 897
 898         /*
 899          * Uninitialize device.
 900          */
 901         rt2x00lib_uninitialize(rt2x00dev);
 902
 903         /*
 904          * Free extra components
 905          */
 906         rt2x00debug_deregister(rt2x00dev);
 907         rt2x00leds_unregister(rt2x00dev);
 908
 909         /*
 910          * Free ieee80211_hw memory.
 911          */
 912         rt2x00lib_remove_hw(rt2x00dev);
 913
 914         /*
 915          * Free firmware image.
 916          */
 917         rt2x00lib_free_firmware(rt2x00dev);
 918
 919         /*
 920          * Free queue structures.
 921          */
 922         rt2x00queue_free(rt2x00dev);
 923 }
 924 EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev);
 925
 926 /*
 927  * Device state handlers
 928  */
 929 #ifdef CONFIG_PM
 930 int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state)
 931 {
 932         NOTICE(rt2x00dev, "Going to sleep.\n");
 933
 934         /*
 935          * Prevent mac80211 from accessing driver while suspended.
 936          */
 937         if (!test_and_clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
 938                 return 0;
 939
 940         /*
 941          * Cleanup as much as possible.
 942          */
 943         rt2x00lib_uninitialize(rt2x00dev);
 944
 945         /*
 946          * Suspend/disable extra components.
 947          */
 948         rt2x00leds_suspend(rt2x00dev);
 949         rt2x00debug_deregister(rt2x00dev);
 950
 951         /*
 952          * Set device mode to sleep for power management,
 953          * on some hardware this call seems to consistently fail.
 954          * From the specifications it is hard to tell why it fails,
 955          * and if this is a "bad thing".
 956          * Overall it is safe to just ignore the failure and
 957          * continue suspending. The only downside is that the
 958          * device will not be in optimal power save mode, but with
 959          * the radio and the other components already disabled the
 960          * device is as good as disabled.
 961          */
 962         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP))
 963                 WARNING(rt2x00dev, "Device failed to enter sleep state, "
 964                         "continue suspending.\n");
 965
 966         return 0;
 967 }
 968 EXPORT_SYMBOL_GPL(rt2x00lib_suspend);
 969
 970 int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
 971 {
 972         NOTICE(rt2x00dev, "Waking up.\n");
 973
 974         /*
 975          * Restore/enable extra components.
 976          */
 977         rt2x00debug_register(rt2x00dev);
 978         rt2x00leds_resume(rt2x00dev);
 979
 980         /*
 981          * We are ready again to receive requests from mac80211.
 982          */
 983         set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
 984
 985         return 0;
 986 }
 987 EXPORT_SYMBOL_GPL(rt2x00lib_resume);
 988 #endif /* CONFIG_PM */
 989
 990 /*
 991  * rt2x00lib module information.
 992  */
 993 MODULE_AUTHOR(DRV_PROJECT);
 994 MODULE_VERSION(DRV_VERSION);
 995 MODULE_DESCRIPTION("rt2x00 library");
 996 MODULE_LICENSE("GPL");