e6a1c6ff44def93eb495f466ff555ec3cc8be5dd
[pandora-kernel.git] / drivers / net / wireless / iwlwifi / iwl-dev.h
1 /******************************************************************************
2  *
3  * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU General Public License as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program; if not, write to the Free Software Foundation, Inc.,
16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17  *
18  * The full GNU General Public License is included in this distribution in the
19  * file called LICENSE.
20  *
21  * Contact Information:
22  *  Intel Linux Wireless <ilw@linux.intel.com>
23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24  *
25  *****************************************************************************/
26 /*
27  * Please use this file (iwl-dev.h) for driver implementation definitions.
28  * Please use iwl-commands.h for uCode API definitions.
29  * Please use iwl-4965-hw.h for hardware-related definitions.
30  */
31
32 #ifndef __iwl_dev_h__
33 #define __iwl_dev_h__
34
35 #include <linux/pci.h> /* for struct pci_device_id */
36 #include <linux/kernel.h>
37 #include <net/ieee80211_radiotap.h>
38
39 #include "iwl-eeprom.h"
40 #include "iwl-csr.h"
41 #include "iwl-prph.h"
42 #include "iwl-fh.h"
43 #include "iwl-debug.h"
44 #include "iwl-4965-hw.h"
45 #include "iwl-3945-hw.h"
46 #include "iwl-3945-led.h"
47 #include "iwl-led.h"
48 #include "iwl-power.h"
49 #include "iwl-agn-rs.h"
50
51 /* configuration for the iwl4965 */
52 extern struct iwl_cfg iwl4965_agn_cfg;
53 extern struct iwl_cfg iwl5300_agn_cfg;
54 extern struct iwl_cfg iwl5100_agn_cfg;
55 extern struct iwl_cfg iwl5350_agn_cfg;
56 extern struct iwl_cfg iwl5100_bg_cfg;
57 extern struct iwl_cfg iwl5100_abg_cfg;
58 extern struct iwl_cfg iwl5150_agn_cfg;
59 extern struct iwl_cfg iwl6000h_2agn_cfg;
60 extern struct iwl_cfg iwl6000i_2agn_cfg;
61 extern struct iwl_cfg iwl6000_3agn_cfg;
62 extern struct iwl_cfg iwl6050_2agn_cfg;
63 extern struct iwl_cfg iwl6050_3agn_cfg;
64 extern struct iwl_cfg iwl1000_bgn_cfg;
65
66 struct iwl_tx_queue;
67
68 /* shared structures from iwl-5000.c */
69 extern struct iwl_mod_params iwl50_mod_params;
70 extern struct iwl_ops iwl5000_ops;
71 extern struct iwl_ucode_ops iwl5000_ucode;
72 extern struct iwl_lib_ops iwl5000_lib;
73 extern struct iwl_hcmd_ops iwl5000_hcmd;
74 extern struct iwl_hcmd_utils_ops iwl5000_hcmd_utils;
75
76 /* shared functions from iwl-5000.c */
77 extern u16 iwl5000_get_hcmd_size(u8 cmd_id, u16 len);
78 extern u16 iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd,
79                                      u8 *data);
80 extern void iwl5000_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
81                                     __le32 *tx_flags);
82 extern int iwl5000_calc_rssi(struct iwl_priv *priv,
83                              struct iwl_rx_phy_res *rx_resp);
84 extern int iwl5000_apm_init(struct iwl_priv *priv);
85 extern void iwl5000_apm_stop(struct iwl_priv *priv);
86 extern int iwl5000_apm_reset(struct iwl_priv *priv);
87 extern void iwl5000_nic_config(struct iwl_priv *priv);
88 extern u16 iwl5000_eeprom_calib_version(struct iwl_priv *priv);
89 extern const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv,
90                                     size_t offset);
91 extern void iwl5000_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
92                                             struct iwl_tx_queue *txq,
93                                             u16 byte_cnt);
94 extern void iwl5000_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
95                                     struct iwl_tx_queue *txq);
96 extern int iwl5000_load_ucode(struct iwl_priv *priv);
97 extern void iwl5000_init_alive_start(struct iwl_priv *priv);
98 extern int iwl5000_alive_notify(struct iwl_priv *priv);
99 extern int iwl5000_hw_set_hw_params(struct iwl_priv *priv);
100 extern int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id,
101                            int tx_fifo, int sta_id, int tid, u16 ssn_idx);
102 extern int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
103                             u16 ssn_idx, u8 tx_fifo);
104 extern void iwl5000_txq_set_sched(struct iwl_priv *priv, u32 mask);
105 extern void iwl5000_setup_deferred_work(struct iwl_priv *priv);
106 extern void iwl5000_rx_handler_setup(struct iwl_priv *priv);
107 extern int iwl5000_hw_valid_rtc_data_addr(u32 addr);
108 extern int iwl5000_send_tx_power(struct iwl_priv *priv);
109 extern void iwl5000_temperature(struct iwl_priv *priv);
110
111 /* CT-KILL constants */
112 #define CT_KILL_THRESHOLD_LEGACY   110 /* in Celsius */
113 #define CT_KILL_THRESHOLD          114 /* in Celsius */
114 #define CT_KILL_EXIT_THRESHOLD     95  /* in Celsius */
115
116 /* Default noise level to report when noise measurement is not available.
117  *   This may be because we're:
118  *   1)  Not associated (4965, no beacon statistics being sent to driver)
119  *   2)  Scanning (noise measurement does not apply to associated channel)
120  *   3)  Receiving CCK (3945 delivers noise info only for OFDM frames)
121  * Use default noise value of -127 ... this is below the range of measurable
122  *   Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
123  *   Also, -127 works better than 0 when averaging frames with/without
124  *   noise info (e.g. averaging might be done in app); measured dBm values are
125  *   always negative ... using a negative value as the default keeps all
126  *   averages within an s8's (used in some apps) range of negative values. */
127 #define IWL_NOISE_MEAS_NOT_AVAILABLE (-127)
128
129 /*
130  * RTS threshold here is total size [2347] minus 4 FCS bytes
131  * Per spec:
132  *   a value of 0 means RTS on all data/management packets
133  *   a value > max MSDU size means no RTS
134  * else RTS for data/management frames where MPDU is larger
135  *   than RTS value.
136  */
137 #define DEFAULT_RTS_THRESHOLD     2347U
138 #define MIN_RTS_THRESHOLD         0U
139 #define MAX_RTS_THRESHOLD         2347U
140 #define MAX_MSDU_SIZE             2304U
141 #define MAX_MPDU_SIZE             2346U
142 #define DEFAULT_BEACON_INTERVAL   100U
143 #define DEFAULT_SHORT_RETRY_LIMIT 7U
144 #define DEFAULT_LONG_RETRY_LIMIT  4U
145
146 struct iwl_rx_mem_buffer {
147         dma_addr_t real_dma_addr;
148         dma_addr_t aligned_dma_addr;
149         struct sk_buff *skb;
150         struct list_head list;
151 };
152
153 /* defined below */
154 struct iwl_device_cmd;
155
156 struct iwl_cmd_meta {
157         /* only for SYNC commands, iff the reply skb is wanted */
158         struct iwl_host_cmd *source;
159         /*
160          * only for ASYNC commands
161          * (which is somewhat stupid -- look at iwl-sta.c for instance
162          * which duplicates a bunch of code because the callback isn't
163          * invoked for SYNC commands, if it were and its result passed
164          * through it would be simpler...)
165          */
166         void (*callback)(struct iwl_priv *priv,
167                          struct iwl_device_cmd *cmd,
168                          struct sk_buff *skb);
169
170         /* The CMD_SIZE_HUGE flag bit indicates that the command
171          * structure is stored at the end of the shared queue memory. */
172         u32 flags;
173
174         DECLARE_PCI_UNMAP_ADDR(mapping)
175         DECLARE_PCI_UNMAP_LEN(len)
176 };
177
178 /*
179  * Generic queue structure
180  *
181  * Contains common data for Rx and Tx queues
182  */
183 struct iwl_queue {
184         int n_bd;              /* number of BDs in this queue */
185         int write_ptr;       /* 1-st empty entry (index) host_w*/
186         int read_ptr;         /* last used entry (index) host_r*/
187         dma_addr_t dma_addr;   /* physical addr for BD's */
188         int n_window;          /* safe queue window */
189         u32 id;
190         int low_mark;          /* low watermark, resume queue if free
191                                 * space more than this */
192         int high_mark;         /* high watermark, stop queue if free
193                                 * space less than this */
194 } __attribute__ ((packed));
195
196 /* One for each TFD */
197 struct iwl_tx_info {
198         struct sk_buff *skb[IWL_NUM_OF_TBS - 1];
199 };
200
201 /**
202  * struct iwl_tx_queue - Tx Queue for DMA
203  * @q: generic Rx/Tx queue descriptor
204  * @bd: base of circular buffer of TFDs
205  * @cmd: array of command/TX buffer pointers
206  * @meta: array of meta data for each command/tx buffer
207  * @dma_addr_cmd: physical address of cmd/tx buffer array
208  * @txb: array of per-TFD driver data
209  * @need_update: indicates need to update read/write index
210  * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled
211  *
212  * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
213  * descriptors) and required locking structures.
214  */
215 #define TFD_TX_CMD_SLOTS 256
216 #define TFD_CMD_SLOTS 32
217
218 struct iwl_tx_queue {
219         struct iwl_queue q;
220         void *tfds;
221         struct iwl_device_cmd **cmd;
222         struct iwl_cmd_meta *meta;
223         struct iwl_tx_info *txb;
224         u8 need_update;
225         u8 sched_retry;
226         u8 active;
227         u8 swq_id;
228 };
229
230 #define IWL_NUM_SCAN_RATES         (2)
231
232 struct iwl4965_channel_tgd_info {
233         u8 type;
234         s8 max_power;
235 };
236
237 struct iwl4965_channel_tgh_info {
238         s64 last_radar_time;
239 };
240
241 #define IWL4965_MAX_RATE (33)
242
243 struct iwl3945_clip_group {
244         /* maximum power level to prevent clipping for each rate, derived by
245          *   us from this band's saturation power in EEPROM */
246         const s8 clip_powers[IWL_MAX_RATES];
247 };
248
249 /* current Tx power values to use, one for each rate for each channel.
250  * requested power is limited by:
251  * -- regulatory EEPROM limits for this channel
252  * -- hardware capabilities (clip-powers)
253  * -- spectrum management
254  * -- user preference (e.g. iwconfig)
255  * when requested power is set, base power index must also be set. */
256 struct iwl3945_channel_power_info {
257         struct iwl3945_tx_power tpc;    /* actual radio and DSP gain settings */
258         s8 power_table_index;   /* actual (compenst'd) index into gain table */
259         s8 base_power_index;    /* gain index for power at factory temp. */
260         s8 requested_power;     /* power (dBm) requested for this chnl/rate */
261 };
262
263 /* current scan Tx power values to use, one for each scan rate for each
264  * channel. */
265 struct iwl3945_scan_power_info {
266         struct iwl3945_tx_power tpc;    /* actual radio and DSP gain settings */
267         s8 power_table_index;   /* actual (compenst'd) index into gain table */
268         s8 requested_power;     /* scan pwr (dBm) requested for chnl/rate */
269 };
270
271 /*
272  * One for each channel, holds all channel setup data
273  * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
274  *     with one another!
275  */
276 struct iwl_channel_info {
277         struct iwl4965_channel_tgd_info tgd;
278         struct iwl4965_channel_tgh_info tgh;
279         struct iwl_eeprom_channel eeprom;       /* EEPROM regulatory limit */
280         struct iwl_eeprom_channel ht40_eeprom;  /* EEPROM regulatory limit for
281                                                  * HT40 channel */
282
283         u8 channel;       /* channel number */
284         u8 flags;         /* flags copied from EEPROM */
285         s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
286         s8 curr_txpow;    /* (dBm) regulatory/spectrum/user (not h/w) limit */
287         s8 min_power;     /* always 0 */
288         s8 scan_power;    /* (dBm) regul. eeprom, direct scans, any rate */
289
290         u8 group_index;   /* 0-4, maps channel to group1/2/3/4/5 */
291         u8 band_index;    /* 0-4, maps channel to band1/2/3/4/5 */
292         enum ieee80211_band band;
293
294         /* HT40 channel info */
295         s8 ht40_max_power_avg;  /* (dBm) regul. eeprom, normal Tx, any rate */
296         s8 ht40_curr_txpow;     /* (dBm) regulatory/spectrum/user (not h/w) */
297         s8 ht40_min_power;      /* always 0 */
298         s8 ht40_scan_power;     /* (dBm) eeprom, direct scans, any rate */
299         u8 ht40_flags;          /* flags copied from EEPROM */
300         u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
301
302         /* Radio/DSP gain settings for each "normal" data Tx rate.
303          * These include, in addition to RF and DSP gain, a few fields for
304          *   remembering/modifying gain settings (indexes). */
305         struct iwl3945_channel_power_info power_info[IWL4965_MAX_RATE];
306
307         /* Radio/DSP gain settings for each scan rate, for directed scans. */
308         struct iwl3945_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES];
309 };
310
311 #define IWL_TX_FIFO_AC0 0
312 #define IWL_TX_FIFO_AC1 1
313 #define IWL_TX_FIFO_AC2 2
314 #define IWL_TX_FIFO_AC3 3
315 #define IWL_TX_FIFO_HCCA_1      5
316 #define IWL_TX_FIFO_HCCA_2      6
317 #define IWL_TX_FIFO_NONE        7
318
319 /* Minimum number of queues. MAX_NUM is defined in hw specific files.
320  * Set the minimum to accommodate the 4 standard TX queues, 1 command
321  * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */
322 #define IWL_MIN_NUM_QUEUES      10
323
324 /* Power management (not Tx power) structures */
325
326 enum iwl_pwr_src {
327         IWL_PWR_SRC_VMAIN,
328         IWL_PWR_SRC_VAUX,
329 };
330
331 #define IEEE80211_DATA_LEN              2304
332 #define IEEE80211_4ADDR_LEN             30
333 #define IEEE80211_HLEN                  (IEEE80211_4ADDR_LEN)
334 #define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
335
336 struct iwl_frame {
337         union {
338                 struct ieee80211_hdr frame;
339                 struct iwl_tx_beacon_cmd beacon;
340                 u8 raw[IEEE80211_FRAME_LEN];
341                 u8 cmd[360];
342         } u;
343         struct list_head list;
344 };
345
346 #define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
347 #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
348 #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
349
350 enum {
351         CMD_SYNC = 0,
352         CMD_SIZE_NORMAL = 0,
353         CMD_NO_SKB = 0,
354         CMD_SIZE_HUGE = (1 << 0),
355         CMD_ASYNC = (1 << 1),
356         CMD_WANT_SKB = (1 << 2),
357 };
358
359 #define IWL_CMD_MAX_PAYLOAD 320
360
361 /**
362  * struct iwl_device_cmd
363  *
364  * For allocation of the command and tx queues, this establishes the overall
365  * size of the largest command we send to uCode, except for a scan command
366  * (which is relatively huge; space is allocated separately).
367  */
368 struct iwl_device_cmd {
369         struct iwl_cmd_header hdr;      /* uCode API */
370         union {
371                 u32 flags;
372                 u8 val8;
373                 u16 val16;
374                 u32 val32;
375                 struct iwl_tx_cmd tx;
376                 u8 payload[IWL_CMD_MAX_PAYLOAD];
377         } __attribute__ ((packed)) cmd;
378 } __attribute__ ((packed));
379
380 #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
381
382
383 struct iwl_host_cmd {
384         const void *data;
385         struct sk_buff *reply_skb;
386         void (*callback)(struct iwl_priv *priv,
387                          struct iwl_device_cmd *cmd,
388                          struct sk_buff *skb);
389         u32 flags;
390         u16 len;
391         u8 id;
392 };
393
394 /*
395  * RX related structures and functions
396  */
397 #define RX_FREE_BUFFERS 64
398 #define RX_LOW_WATERMARK 8
399
400 #define SUP_RATE_11A_MAX_NUM_CHANNELS  8
401 #define SUP_RATE_11B_MAX_NUM_CHANNELS  4
402 #define SUP_RATE_11G_MAX_NUM_CHANNELS  12
403
404 /**
405  * struct iwl_rx_queue - Rx queue
406  * @bd: driver's pointer to buffer of receive buffer descriptors (rbd)
407  * @dma_addr: bus address of buffer of receive buffer descriptors (rbd)
408  * @read: Shared index to newest available Rx buffer
409  * @write: Shared index to oldest written Rx packet
410  * @free_count: Number of pre-allocated buffers in rx_free
411  * @rx_free: list of free SKBs for use
412  * @rx_used: List of Rx buffers with no SKB
413  * @need_update: flag to indicate we need to update read/write index
414  * @rb_stts: driver's pointer to receive buffer status
415  * @rb_stts_dma: bus address of receive buffer status
416  *
417  * NOTE:  rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers
418  */
419 struct iwl_rx_queue {
420         __le32 *bd;
421         dma_addr_t dma_addr;
422         struct iwl_rx_mem_buffer pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS];
423         struct iwl_rx_mem_buffer *queue[RX_QUEUE_SIZE];
424         u32 read;
425         u32 write;
426         u32 free_count;
427         u32 write_actual;
428         struct list_head rx_free;
429         struct list_head rx_used;
430         int need_update;
431         struct iwl_rb_status *rb_stts;
432         dma_addr_t rb_stts_dma;
433         spinlock_t lock;
434 };
435
436 #define IWL_SUPPORTED_RATES_IE_LEN         8
437
438 #define MAX_TID_COUNT        9
439
440 #define IWL_INVALID_RATE     0xFF
441 #define IWL_INVALID_VALUE    -1
442
443 /**
444  * struct iwl_ht_agg -- aggregation status while waiting for block-ack
445  * @txq_id: Tx queue used for Tx attempt
446  * @frame_count: # frames attempted by Tx command
447  * @wait_for_ba: Expect block-ack before next Tx reply
448  * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx window
449  * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx window
450  * @bitmap1: High order, one bit for each frame pending ACK in Tx window
451  * @rate_n_flags: Rate at which Tx was attempted
452  *
453  * If REPLY_TX indicates that aggregation was attempted, driver must wait
454  * for block ack (REPLY_COMPRESSED_BA).  This struct stores tx reply info
455  * until block ack arrives.
456  */
457 struct iwl_ht_agg {
458         u16 txq_id;
459         u16 frame_count;
460         u16 wait_for_ba;
461         u16 start_idx;
462         u64 bitmap;
463         u32 rate_n_flags;
464 #define IWL_AGG_OFF 0
465 #define IWL_AGG_ON 1
466 #define IWL_EMPTYING_HW_QUEUE_ADDBA 2
467 #define IWL_EMPTYING_HW_QUEUE_DELBA 3
468         u8 state;
469 };
470
471
472 struct iwl_tid_data {
473         u16 seq_number;
474         u16 tfds_in_queue;
475         struct iwl_ht_agg agg;
476 };
477
478 struct iwl_hw_key {
479         enum ieee80211_key_alg alg;
480         int keylen;
481         u8 keyidx;
482         u8 key[32];
483 };
484
485 union iwl_ht_rate_supp {
486         u16 rates;
487         struct {
488                 u8 siso_rate;
489                 u8 mimo_rate;
490         };
491 };
492
493 #define CFG_HT_RX_AMPDU_FACTOR_DEF  (0x3)
494
495 /*
496  * Maximal MPDU density for TX aggregation
497  * 4 - 2us density
498  * 5 - 4us density
499  * 6 - 8us density
500  * 7 - 16us density
501  */
502 #define CFG_HT_MPDU_DENSITY_4USEC   (0x5)
503 #define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
504
505 struct iwl_ht_info {
506         /* self configuration data */
507         u8 is_ht;
508         u8 supported_chan_width;
509         u8 sm_ps;
510         u8 is_green_field;
511         struct ieee80211_mcs_info mcs;
512         /* BSS related data */
513         u8 extension_chan_offset;
514         u8 ht_protection;
515         u8 non_GF_STA_present;
516 };
517
518 union iwl_qos_capabity {
519         struct {
520                 u8 edca_count:4;        /* bit 0-3 */
521                 u8 q_ack:1;             /* bit 4 */
522                 u8 queue_request:1;     /* bit 5 */
523                 u8 txop_request:1;      /* bit 6 */
524                 u8 reserved:1;          /* bit 7 */
525         } q_AP;
526         struct {
527                 u8 acvo_APSD:1;         /* bit 0 */
528                 u8 acvi_APSD:1;         /* bit 1 */
529                 u8 ac_bk_APSD:1;        /* bit 2 */
530                 u8 ac_be_APSD:1;        /* bit 3 */
531                 u8 q_ack:1;             /* bit 4 */
532                 u8 max_len:2;           /* bit 5-6 */
533                 u8 more_data_ack:1;     /* bit 7 */
534         } q_STA;
535         u8 val;
536 };
537
538 /* QoS structures */
539 struct iwl_qos_info {
540         int qos_active;
541         union iwl_qos_capabity qos_cap;
542         struct iwl_qosparam_cmd def_qos_parm;
543 };
544
545 #define STA_PS_STATUS_WAKE             0
546 #define STA_PS_STATUS_SLEEP            1
547
548
549 struct iwl3945_station_entry {
550         struct iwl3945_addsta_cmd sta;
551         struct iwl_tid_data tid[MAX_TID_COUNT];
552         u8 used;
553         u8 ps_status;
554         struct iwl_hw_key keyinfo;
555 };
556
557 struct iwl_station_entry {
558         struct iwl_addsta_cmd sta;
559         struct iwl_tid_data tid[MAX_TID_COUNT];
560         u8 used;
561         u8 ps_status;
562         struct iwl_hw_key keyinfo;
563 };
564
565 /* one for each uCode image (inst/data, boot/init/runtime) */
566 struct fw_desc {
567         void *v_addr;           /* access by driver */
568         dma_addr_t p_addr;      /* access by card's busmaster DMA */
569         u32 len;                /* bytes */
570 };
571
572 /* uCode file layout */
573 struct iwl_ucode_header {
574         __le32 ver;     /* major/minor/API/serial */
575         union {
576                 struct {
577                         __le32 inst_size;       /* bytes of runtime code */
578                         __le32 data_size;       /* bytes of runtime data */
579                         __le32 init_size;       /* bytes of init code */
580                         __le32 init_data_size;  /* bytes of init data */
581                         __le32 boot_size;       /* bytes of bootstrap code */
582                         u8 data[0];             /* in same order as sizes */
583                 } v1;
584                 struct {
585                         __le32 build;           /* build number */
586                         __le32 inst_size;       /* bytes of runtime code */
587                         __le32 data_size;       /* bytes of runtime data */
588                         __le32 init_size;       /* bytes of init code */
589                         __le32 init_data_size;  /* bytes of init data */
590                         __le32 boot_size;       /* bytes of bootstrap code */
591                         u8 data[0];             /* in same order as sizes */
592                 } v2;
593         } u;
594 };
595 #define UCODE_HEADER_SIZE(ver) ((ver) == 1 ? 24 : 28)
596
597 struct iwl4965_ibss_seq {
598         u8 mac[ETH_ALEN];
599         u16 seq_num;
600         u16 frag_num;
601         unsigned long packet_time;
602         struct list_head list;
603 };
604
605 struct iwl_sensitivity_ranges {
606         u16 min_nrg_cck;
607         u16 max_nrg_cck;
608
609         u16 nrg_th_cck;
610         u16 nrg_th_ofdm;
611
612         u16 auto_corr_min_ofdm;
613         u16 auto_corr_min_ofdm_mrc;
614         u16 auto_corr_min_ofdm_x1;
615         u16 auto_corr_min_ofdm_mrc_x1;
616
617         u16 auto_corr_max_ofdm;
618         u16 auto_corr_max_ofdm_mrc;
619         u16 auto_corr_max_ofdm_x1;
620         u16 auto_corr_max_ofdm_mrc_x1;
621
622         u16 auto_corr_max_cck;
623         u16 auto_corr_max_cck_mrc;
624         u16 auto_corr_min_cck;
625         u16 auto_corr_min_cck_mrc;
626 };
627
628
629 #define KELVIN_TO_CELSIUS(x) ((x)-273)
630 #define CELSIUS_TO_KELVIN(x) ((x)+273)
631
632
633 /**
634  * struct iwl_hw_params
635  * @max_txq_num: Max # Tx queues supported
636  * @dma_chnl_num: Number of Tx DMA/FIFO channels
637  * @scd_bc_tbls_size: size of scheduler byte count tables
638  * @tfd_size: TFD size
639  * @tx/rx_chains_num: Number of TX/RX chains
640  * @valid_tx/rx_ant: usable antennas
641  * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2)
642  * @max_rxq_log: Log-base-2 of max_rxq_size
643  * @rx_buf_size: Rx buffer size
644  * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR
645  * @max_stations:
646  * @bcast_sta_id:
647  * @ht40_channel: is 40MHz width possible in band 2.4
648  * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ)
649  * @sw_crypto: 0 for hw, 1 for sw
650  * @max_xxx_size: for ucode uses
651  * @ct_kill_threshold: temperature threshold
652  * @calib_init_cfg: setup initial calibrations for the hw
653  * @struct iwl_sensitivity_ranges: range of sensitivity values
654  */
655 struct iwl_hw_params {
656         u8 max_txq_num;
657         u8 dma_chnl_num;
658         u16 scd_bc_tbls_size;
659         u32 tfd_size;
660         u8  tx_chains_num;
661         u8  rx_chains_num;
662         u8  valid_tx_ant;
663         u8  valid_rx_ant;
664         u16 max_rxq_size;
665         u16 max_rxq_log;
666         u32 rx_buf_size;
667         u32 rx_wrt_ptr_reg;
668         u32 max_pkt_size;
669         u8  max_stations;
670         u8  bcast_sta_id;
671         u8  ht40_channel;
672         u8  max_beacon_itrvl;   /* in 1024 ms */
673         u32 max_inst_size;
674         u32 max_data_size;
675         u32 max_bsm_size;
676         u32 ct_kill_threshold; /* value in hw-dependent units */
677         u32 ct_kill_exit_threshold; /* value in hw-dependent units */
678                                     /* for 1000, 6000 series and up */
679         u32 calib_init_cfg;
680         const struct iwl_sensitivity_ranges *sens;
681 };
682
683
684 /******************************************************************************
685  *
686  * Functions implemented in core module which are forward declared here
687  * for use by iwl-[4-5].c
688  *
689  * NOTE:  The implementation of these functions are not hardware specific
690  * which is why they are in the core module files.
691  *
692  * Naming convention --
693  * iwl_         <-- Is part of iwlwifi
694  * iwlXXXX_     <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
695  * iwl4965_bg_      <-- Called from work queue context
696  * iwl4965_mac_     <-- mac80211 callback
697  *
698  ****************************************************************************/
699 extern void iwl_update_chain_flags(struct iwl_priv *priv);
700 extern int iwl_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src);
701 extern const u8 iwl_bcast_addr[ETH_ALEN];
702 extern int iwl_rxq_stop(struct iwl_priv *priv);
703 extern void iwl_txq_ctx_stop(struct iwl_priv *priv);
704 extern int iwl_queue_space(const struct iwl_queue *q);
705 static inline int iwl_queue_used(const struct iwl_queue *q, int i)
706 {
707         return q->write_ptr > q->read_ptr ?
708                 (i >= q->read_ptr && i < q->write_ptr) :
709                 !(i < q->read_ptr && i >= q->write_ptr);
710 }
711
712
713 static inline u8 get_cmd_index(struct iwl_queue *q, u32 index, int is_huge)
714 {
715         /* This is for scan command, the big buffer at end of command array */
716         if (is_huge)
717                 return q->n_window;     /* must be power of 2 */
718
719         /* Otherwise, use normal size buffers */
720         return index & (q->n_window - 1);
721 }
722
723
724 struct iwl_dma_ptr {
725         dma_addr_t dma;
726         void *addr;
727         size_t size;
728 };
729
730 #define IWL_CHANNEL_WIDTH_20MHZ   0
731 #define IWL_CHANNEL_WIDTH_40MHZ   1
732
733 #define IWL_OPERATION_MODE_AUTO     0
734 #define IWL_OPERATION_MODE_HT_ONLY  1
735 #define IWL_OPERATION_MODE_MIXED    2
736 #define IWL_OPERATION_MODE_20MHZ    3
737
738 #define IWL_TX_CRC_SIZE 4
739 #define IWL_TX_DELIMITER_SIZE 4
740
741 #define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000
742
743 /* Sensitivity and chain noise calibration */
744 #define INITIALIZATION_VALUE            0xFFFF
745 #define CAL_NUM_OF_BEACONS              20
746 #define MAXIMUM_ALLOWED_PATHLOSS        15
747
748 #define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
749
750 #define MAX_FA_OFDM  50
751 #define MIN_FA_OFDM  5
752 #define MAX_FA_CCK   50
753 #define MIN_FA_CCK   5
754
755 #define AUTO_CORR_STEP_OFDM       1
756
757 #define AUTO_CORR_STEP_CCK     3
758 #define AUTO_CORR_MAX_TH_CCK   160
759
760 #define NRG_DIFF               2
761 #define NRG_STEP_CCK           2
762 #define NRG_MARGIN             8
763 #define MAX_NUMBER_CCK_NO_FA 100
764
765 #define AUTO_CORR_CCK_MIN_VAL_DEF    (125)
766
767 #define CHAIN_A             0
768 #define CHAIN_B             1
769 #define CHAIN_C             2
770 #define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
771 #define ALL_BAND_FILTER                 0xFF00
772 #define IN_BAND_FILTER                  0xFF
773 #define MIN_AVERAGE_NOISE_MAX_VALUE     0xFFFFFFFF
774
775 #define NRG_NUM_PREV_STAT_L     20
776 #define NUM_RX_CHAINS           3
777
778 enum iwl4965_false_alarm_state {
779         IWL_FA_TOO_MANY = 0,
780         IWL_FA_TOO_FEW = 1,
781         IWL_FA_GOOD_RANGE = 2,
782 };
783
784 enum iwl4965_chain_noise_state {
785         IWL_CHAIN_NOISE_ALIVE = 0,  /* must be 0 */
786         IWL_CHAIN_NOISE_ACCUMULATE,
787         IWL_CHAIN_NOISE_CALIBRATED,
788         IWL_CHAIN_NOISE_DONE,
789 };
790
791 enum iwl4965_calib_enabled_state {
792         IWL_CALIB_DISABLED = 0,  /* must be 0 */
793         IWL_CALIB_ENABLED = 1,
794 };
795
796
797 /*
798  * enum iwl_calib
799  * defines the order in which results of initial calibrations
800  * should be sent to the runtime uCode
801  */
802 enum iwl_calib {
803         IWL_CALIB_XTAL,
804         IWL_CALIB_DC,
805         IWL_CALIB_LO,
806         IWL_CALIB_TX_IQ,
807         IWL_CALIB_TX_IQ_PERD,
808         IWL_CALIB_BASE_BAND,
809         IWL_CALIB_MAX
810 };
811
812 /* Opaque calibration results */
813 struct iwl_calib_result {
814         void *buf;
815         size_t buf_len;
816 };
817
818 enum ucode_type {
819         UCODE_NONE = 0,
820         UCODE_INIT,
821         UCODE_RT
822 };
823
824 /* Sensitivity calib data */
825 struct iwl_sensitivity_data {
826         u32 auto_corr_ofdm;
827         u32 auto_corr_ofdm_mrc;
828         u32 auto_corr_ofdm_x1;
829         u32 auto_corr_ofdm_mrc_x1;
830         u32 auto_corr_cck;
831         u32 auto_corr_cck_mrc;
832
833         u32 last_bad_plcp_cnt_ofdm;
834         u32 last_fa_cnt_ofdm;
835         u32 last_bad_plcp_cnt_cck;
836         u32 last_fa_cnt_cck;
837
838         u32 nrg_curr_state;
839         u32 nrg_prev_state;
840         u32 nrg_value[10];
841         u8  nrg_silence_rssi[NRG_NUM_PREV_STAT_L];
842         u32 nrg_silence_ref;
843         u32 nrg_energy_idx;
844         u32 nrg_silence_idx;
845         u32 nrg_th_cck;
846         s32 nrg_auto_corr_silence_diff;
847         u32 num_in_cck_no_fa;
848         u32 nrg_th_ofdm;
849 };
850
851 /* Chain noise (differential Rx gain) calib data */
852 struct iwl_chain_noise_data {
853         u32 active_chains;
854         u32 chain_noise_a;
855         u32 chain_noise_b;
856         u32 chain_noise_c;
857         u32 chain_signal_a;
858         u32 chain_signal_b;
859         u32 chain_signal_c;
860         u16 beacon_count;
861         u8 disconn_array[NUM_RX_CHAINS];
862         u8 delta_gain_code[NUM_RX_CHAINS];
863         u8 radio_write;
864         u8 state;
865 };
866
867 #define EEPROM_SEM_TIMEOUT 10           /* milliseconds */
868 #define EEPROM_SEM_RETRY_LIMIT 1000     /* number of attempts (not time) */
869
870 #define IWL_TRAFFIC_ENTRIES     (256)
871 #define IWL_TRAFFIC_ENTRY_SIZE  (64)
872
873 enum {
874         MEASUREMENT_READY = (1 << 0),
875         MEASUREMENT_ACTIVE = (1 << 1),
876 };
877
878 enum iwl_nvm_type {
879         NVM_DEVICE_TYPE_EEPROM = 0,
880         NVM_DEVICE_TYPE_OTP,
881 };
882
883 /*
884  * Two types of OTP memory access modes
885  *   IWL_OTP_ACCESS_ABSOLUTE - absolute address mode,
886  *                              based on physical memory addressing
887  *   IWL_OTP_ACCESS_RELATIVE - relative address mode,
888  *                             based on logical memory addressing
889  */
890 enum iwl_access_mode {
891         IWL_OTP_ACCESS_ABSOLUTE,
892         IWL_OTP_ACCESS_RELATIVE,
893 };
894
895 /**
896  * enum iwl_pa_type - Power Amplifier type
897  * @IWL_PA_SYSTEM:  based on uCode configuration
898  * @IWL_PA_HYBRID: use both Internal and external PA
899  * @IWL_PA_INTERNAL: use Internal only
900  */
901 enum iwl_pa_type {
902         IWL_PA_SYSTEM = 0,
903         IWL_PA_HYBRID = 1,
904         IWL_PA_INTERNAL = 2,
905 };
906
907 /* interrupt statistics */
908 struct isr_statistics {
909         u32 hw;
910         u32 sw;
911         u32 sw_err;
912         u32 sch;
913         u32 alive;
914         u32 rfkill;
915         u32 ctkill;
916         u32 wakeup;
917         u32 rx;
918         u32 rx_handlers[REPLY_MAX];
919         u32 tx;
920         u32 unhandled;
921 };
922
923 #ifdef CONFIG_IWLWIFI_DEBUGFS
924 /* management statistics */
925 enum iwl_mgmt_stats {
926         MANAGEMENT_ASSOC_REQ = 0,
927         MANAGEMENT_ASSOC_RESP,
928         MANAGEMENT_REASSOC_REQ,
929         MANAGEMENT_REASSOC_RESP,
930         MANAGEMENT_PROBE_REQ,
931         MANAGEMENT_PROBE_RESP,
932         MANAGEMENT_BEACON,
933         MANAGEMENT_ATIM,
934         MANAGEMENT_DISASSOC,
935         MANAGEMENT_AUTH,
936         MANAGEMENT_DEAUTH,
937         MANAGEMENT_ACTION,
938         MANAGEMENT_MAX,
939 };
940 /* control statistics */
941 enum iwl_ctrl_stats {
942         CONTROL_BACK_REQ =  0,
943         CONTROL_BACK,
944         CONTROL_PSPOLL,
945         CONTROL_RTS,
946         CONTROL_CTS,
947         CONTROL_ACK,
948         CONTROL_CFEND,
949         CONTROL_CFENDACK,
950         CONTROL_MAX,
951 };
952
953 struct traffic_stats {
954         u32 mgmt[MANAGEMENT_MAX];
955         u32 ctrl[CONTROL_MAX];
956         u32 data_cnt;
957         u64 data_bytes;
958 };
959 #else
960 struct traffic_stats {
961         u64 data_bytes;
962 };
963 #endif
964
965 #define IWL_MAX_NUM_QUEUES      20 /* FIXME: do dynamic allocation */
966
967 struct iwl_priv {
968
969         /* ieee device used by generic ieee processing code */
970         struct ieee80211_hw *hw;
971         struct ieee80211_channel *ieee_channels;
972         struct ieee80211_rate *ieee_rates;
973         struct iwl_cfg *cfg;
974
975         /* temporary frame storage list */
976         struct list_head free_frames;
977         int frames_count;
978
979         enum ieee80211_band band;
980         int alloc_rxb_skb;
981
982         void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv,
983                                        struct iwl_rx_mem_buffer *rxb);
984
985         struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
986
987 #if defined(CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT) || defined(CONFIG_IWL3945_SPECTRUM_MEASUREMENT)
988         /* spectrum measurement report caching */
989         struct iwl_spectrum_notification measure_report;
990         u8 measurement_status;
991 #endif
992         /* ucode beacon time */
993         u32 ucode_beacon_time;
994
995         /* we allocate array of iwl4965_channel_info for NIC's valid channels.
996          *    Access via channel # using indirect index array */
997         struct iwl_channel_info *channel_info;  /* channel info array */
998         u8 channel_count;       /* # of channels */
999
1000         /* each calibration channel group in the EEPROM has a derived
1001          * clip setting for each rate. 3945 only.*/
1002         const struct iwl3945_clip_group clip39_groups[5];
1003
1004         /* thermal calibration */
1005         s32 temperature;        /* degrees Kelvin */
1006         s32 last_temperature;
1007
1008         /* init calibration results */
1009         struct iwl_calib_result calib_results[IWL_CALIB_MAX];
1010
1011         /* Scan related variables */
1012         unsigned long last_scan_jiffies;
1013         unsigned long next_scan_jiffies;
1014         unsigned long scan_start;
1015         unsigned long scan_pass_start;
1016         unsigned long scan_start_tsf;
1017         void *scan;
1018         int scan_bands;
1019         struct cfg80211_scan_request *scan_request;
1020         u8 scan_tx_ant[IEEE80211_NUM_BANDS];
1021         u8 mgmt_tx_ant;
1022
1023         /* spinlock */
1024         spinlock_t lock;        /* protect general shared data */
1025         spinlock_t hcmd_lock;   /* protect hcmd */
1026         spinlock_t reg_lock;    /* protect hw register access */
1027         struct mutex mutex;
1028
1029         /* basic pci-network driver stuff */
1030         struct pci_dev *pci_dev;
1031
1032         /* pci hardware address support */
1033         void __iomem *hw_base;
1034         u32  hw_rev;
1035         u32  hw_wa_rev;
1036         u8   rev_id;
1037
1038         /* uCode images, save to reload in case of failure */
1039         u32 ucode_ver;                  /* version of ucode, copy of
1040                                            iwl_ucode.ver */
1041         struct fw_desc ucode_code;      /* runtime inst */
1042         struct fw_desc ucode_data;      /* runtime data original */
1043         struct fw_desc ucode_data_backup;       /* runtime data save/restore */
1044         struct fw_desc ucode_init;      /* initialization inst */
1045         struct fw_desc ucode_init_data; /* initialization data */
1046         struct fw_desc ucode_boot;      /* bootstrap inst */
1047         enum ucode_type ucode_type;
1048         u8 ucode_write_complete;        /* the image write is complete */
1049
1050
1051         struct iwl_rxon_time_cmd rxon_timing;
1052
1053         /* We declare this const so it can only be
1054          * changed via explicit cast within the
1055          * routines that actually update the physical
1056          * hardware */
1057         const struct iwl_rxon_cmd active_rxon;
1058         struct iwl_rxon_cmd staging_rxon;
1059
1060         struct iwl_rxon_cmd recovery_rxon;
1061
1062         /* 1st responses from initialize and runtime uCode images.
1063          * 4965's initialize alive response contains some calibration data. */
1064         struct iwl_init_alive_resp card_alive_init;
1065         struct iwl_alive_resp card_alive;
1066
1067 #ifdef CONFIG_IWLWIFI_LEDS
1068         unsigned long last_blink_time;
1069         u8 last_blink_rate;
1070         u8 allow_blinking;
1071         u64 led_tpt;
1072         struct iwl_led led[IWL_LED_TRG_MAX];
1073         unsigned int rxtxpackets;
1074 #endif
1075         u16 active_rate;
1076         u16 active_rate_basic;
1077
1078         u8 assoc_station_added;
1079         u8 start_calib;
1080         struct iwl_sensitivity_data sensitivity_data;
1081         struct iwl_chain_noise_data chain_noise_data;
1082         __le16 sensitivity_tbl[HD_TABLE_SIZE];
1083
1084         struct iwl_ht_info current_ht_config;
1085         u8 last_phy_res[100];
1086
1087         /* Rate scaling data */
1088         s8 data_retry_limit;
1089         u8 retry_rate;
1090
1091         wait_queue_head_t wait_command_queue;
1092
1093         int activity_timer_active;
1094
1095         /* Rx and Tx DMA processing queues */
1096         struct iwl_rx_queue rxq;
1097         struct iwl_tx_queue txq[IWL_MAX_NUM_QUEUES];
1098         unsigned long txq_ctx_active_msk;
1099         struct iwl_dma_ptr  kw; /* keep warm address */
1100         struct iwl_dma_ptr  scd_bc_tbls;
1101
1102         u32 scd_base_addr;      /* scheduler sram base address */
1103
1104         unsigned long status;
1105
1106         int last_rx_rssi;       /* From Rx packet statistics */
1107         int last_rx_noise;      /* From beacon statistics */
1108
1109         /* counts mgmt, ctl, and data packets */
1110         struct traffic_stats tx_stats;
1111         struct traffic_stats rx_stats;
1112
1113         /* counts interrupts */
1114         struct isr_statistics isr_stats;
1115
1116         struct iwl_power_mgr power_data;
1117         struct iwl_tt_mgmt thermal_throttle;
1118
1119         struct iwl_notif_statistics statistics;
1120         unsigned long last_statistics_time;
1121
1122         /* context information */
1123         u16 rates_mask;
1124
1125         u8 bssid[ETH_ALEN];
1126         u16 rts_threshold;
1127         u8 mac_addr[ETH_ALEN];
1128
1129         /*station table variables */
1130         spinlock_t sta_lock;
1131         int num_stations;
1132         struct iwl_station_entry stations[IWL_STATION_COUNT];
1133         struct iwl_wep_key wep_keys[WEP_KEYS_MAX];
1134         u8 default_wep_key;
1135         u8 key_mapping_key;
1136         unsigned long ucode_key_table;
1137
1138         /* queue refcounts */
1139 #define IWL_MAX_HW_QUEUES       32
1140         unsigned long queue_stopped[BITS_TO_LONGS(IWL_MAX_HW_QUEUES)];
1141         /* for each AC */
1142         atomic_t queue_stop_count[4];
1143
1144         /* Indication if ieee80211_ops->open has been called */
1145         u8 is_open;
1146
1147         u8 mac80211_registered;
1148
1149         /* Rx'd packet timing information */
1150         u32 last_beacon_time;
1151         u64 last_tsf;
1152
1153         /* eeprom */
1154         u8 *eeprom;
1155         int    nvm_device_type;
1156         struct iwl_eeprom_calib_info *calib_info;
1157
1158         enum nl80211_iftype iw_mode;
1159
1160         struct sk_buff *ibss_beacon;
1161
1162         /* Last Rx'd beacon timestamp */
1163         u64 timestamp;
1164         u16 beacon_int;
1165         struct ieee80211_vif *vif;
1166
1167         /*Added for 3945 */
1168         void *shared_virt;
1169         dma_addr_t shared_phys;
1170         /*End*/
1171         struct iwl_hw_params hw_params;
1172
1173         /* INT ICT Table */
1174         u32 *ict_tbl;
1175         dma_addr_t ict_tbl_dma;
1176         dma_addr_t aligned_ict_tbl_dma;
1177         int ict_index;
1178         void *ict_tbl_vir;
1179         u32 inta;
1180         bool use_ict;
1181
1182         u32 inta_mask;
1183         /* Current association information needed to configure the
1184          * hardware */
1185         u16 assoc_id;
1186         u16 assoc_capability;
1187
1188         struct iwl_qos_info qos_data;
1189
1190         struct workqueue_struct *workqueue;
1191
1192         struct work_struct up;
1193         struct work_struct restart;
1194         struct work_struct calibrated_work;
1195         struct work_struct scan_completed;
1196         struct work_struct rx_replenish;
1197         struct work_struct abort_scan;
1198         struct work_struct update_link_led;
1199         struct work_struct auth_work;
1200         struct work_struct report_work;
1201         struct work_struct request_scan;
1202         struct work_struct beacon_update;
1203         struct work_struct tt_work;
1204         struct work_struct ct_enter;
1205         struct work_struct ct_exit;
1206
1207         struct tasklet_struct irq_tasklet;
1208
1209         struct delayed_work init_alive_start;
1210         struct delayed_work alive_start;
1211         struct delayed_work scan_check;
1212
1213         /*For 3945 only*/
1214         struct delayed_work thermal_periodic;
1215         struct delayed_work rfkill_poll;
1216
1217         /* TX Power */
1218         s8 tx_power_user_lmt;
1219         s8 tx_power_channel_lmt;
1220
1221
1222 #ifdef CONFIG_IWLWIFI_DEBUG
1223         /* debugging info */
1224         u32 debug_level; /* per device debugging will override global
1225                             iwl_debug_level if set */
1226         u32 framecnt_to_us;
1227         atomic_t restrict_refcnt;
1228         bool disable_ht40;
1229 #ifdef CONFIG_IWLWIFI_DEBUGFS
1230         /* debugfs */
1231         u16 tx_traffic_idx;
1232         u16 rx_traffic_idx;
1233         u8 *tx_traffic;
1234         u8 *rx_traffic;
1235         struct iwl_debugfs *dbgfs;
1236 #endif /* CONFIG_IWLWIFI_DEBUGFS */
1237 #endif /* CONFIG_IWLWIFI_DEBUG */
1238
1239         struct work_struct txpower_work;
1240         u32 disable_sens_cal;
1241         u32 disable_chain_noise_cal;
1242         u32 disable_tx_power_cal;
1243         struct work_struct run_time_calib_work;
1244         struct timer_list statistics_periodic;
1245         bool hw_ready;
1246         /*For 3945*/
1247 #define IWL_DEFAULT_TX_POWER 0x0F
1248
1249         struct iwl3945_notif_statistics statistics_39;
1250
1251         u32 sta_supp_rates;
1252 }; /*iwl_priv */
1253
1254 static inline void iwl_txq_ctx_activate(struct iwl_priv *priv, int txq_id)
1255 {
1256         set_bit(txq_id, &priv->txq_ctx_active_msk);
1257 }
1258
1259 static inline void iwl_txq_ctx_deactivate(struct iwl_priv *priv, int txq_id)
1260 {
1261         clear_bit(txq_id, &priv->txq_ctx_active_msk);
1262 }
1263
1264 #ifdef CONFIG_IWLWIFI_DEBUG
1265 const char *iwl_get_tx_fail_reason(u32 status);
1266 /*
1267  * iwl_get_debug_level: Return active debug level for device
1268  *
1269  * Using sysfs it is possible to set per device debug level. This debug
1270  * level will be used if set, otherwise the global debug level which can be
1271  * set via module parameter is used.
1272  */
1273 static inline u32 iwl_get_debug_level(struct iwl_priv *priv)
1274 {
1275         if (priv->debug_level)
1276                 return priv->debug_level;
1277         else
1278                 return iwl_debug_level;
1279 }
1280 #else
1281 static inline const char *iwl_get_tx_fail_reason(u32 status) { return ""; }
1282
1283 static inline u32 iwl_get_debug_level(struct iwl_priv *priv)
1284 {
1285         return iwl_debug_level;
1286 }
1287 #endif
1288
1289
1290 static inline struct ieee80211_hdr *iwl_tx_queue_get_hdr(struct iwl_priv *priv,
1291                                                          int txq_id, int idx)
1292 {
1293         if (priv->txq[txq_id].txb[idx].skb[0])
1294                 return (struct ieee80211_hdr *)priv->txq[txq_id].
1295                                 txb[idx].skb[0]->data;
1296         return NULL;
1297 }
1298
1299
1300 static inline int iwl_is_associated(struct iwl_priv *priv)
1301 {
1302         return (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
1303 }
1304
1305 static inline int is_channel_valid(const struct iwl_channel_info *ch_info)
1306 {
1307         if (ch_info == NULL)
1308                 return 0;
1309         return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0;
1310 }
1311
1312 static inline int is_channel_radar(const struct iwl_channel_info *ch_info)
1313 {
1314         return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0;
1315 }
1316
1317 static inline u8 is_channel_a_band(const struct iwl_channel_info *ch_info)
1318 {
1319         return ch_info->band == IEEE80211_BAND_5GHZ;
1320 }
1321
1322 static inline u8 is_channel_bg_band(const struct iwl_channel_info *ch_info)
1323 {
1324         return ch_info->band == IEEE80211_BAND_2GHZ;
1325 }
1326
1327 static inline int is_channel_passive(const struct iwl_channel_info *ch)
1328 {
1329         return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
1330 }
1331
1332 static inline int is_channel_ibss(const struct iwl_channel_info *ch)
1333 {
1334         return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0;
1335 }
1336
1337 #endif                          /* __iwl_dev_h__ */