drivers/net/myri10ge/myri10ge.c

   1 /*************************************************************************
   2  * myri10ge.c: Myricom Myri-10G Ethernet driver.
   3  *
   4  * Copyright (C) 2005 - 2007 Myricom, Inc.
   5  * All rights reserved.
   6  *
   7  * Redistribution and use in source and binary forms, with or without
   8  * modification, are permitted provided that the following conditions
   9  * are met:
  10  * 1. Redistributions of source code must retain the above copyright
  11  *    notice, this list of conditions and the following disclaimer.
  12  * 2. Redistributions in binary form must reproduce the above copyright
  13  *    notice, this list of conditions and the following disclaimer in the
  14  *    documentation and/or other materials provided with the distribution.
  15  * 3. Neither the name of Myricom, Inc. nor the names of its contributors
  16  *    may be used to endorse or promote products derived from this software
  17  *    without specific prior written permission.
  18  *
  19  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  20  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  22  * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
  23  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  24  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  27  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  29  * POSSIBILITY OF SUCH DAMAGE.
  30  *
  31  *
  32  * If the eeprom on your board is not recent enough, you will need to get a
  33  * newer firmware image at:
  34  *   http://www.myri.com/scs/download-Myri10GE.html
  35  *
  36  * Contact Information:
  37  *   <help@myri.com>
  38  *   Myricom, Inc., 325N Santa Anita Avenue, Arcadia, CA 91006
  39  *************************************************************************/
  40
  41 #include <linux/tcp.h>
  42 #include <linux/netdevice.h>
  43 #include <linux/skbuff.h>
  44 #include <linux/string.h>
  45 #include <linux/module.h>
  46 #include <linux/pci.h>
  47 #include <linux/dma-mapping.h>
  48 #include <linux/etherdevice.h>
  49 #include <linux/if_ether.h>
  50 #include <linux/if_vlan.h>
  51 #include <linux/inet_lro.h>
  52 #include <linux/dca.h>
  53 #include <linux/ip.h>
  54 #include <linux/inet.h>
  55 #include <linux/in.h>
  56 #include <linux/ethtool.h>
  57 #include <linux/firmware.h>
  58 #include <linux/delay.h>
  59 #include <linux/timer.h>
  60 #include <linux/vmalloc.h>
  61 #include <linux/crc32.h>
  62 #include <linux/moduleparam.h>
  63 #include <linux/io.h>
  64 #include <linux/log2.h>
  65 #include <net/checksum.h>
  66 #include <net/ip.h>
  67 #include <net/tcp.h>
  68 #include <asm/byteorder.h>
  69 #include <asm/io.h>
  70 #include <asm/processor.h>
  71 #ifdef CONFIG_MTRR
  72 #include <asm/mtrr.h>
  73 #endif
  74
  75 #include "myri10ge_mcp.h"
  76 #include "myri10ge_mcp_gen_header.h"
  77
  78 #define MYRI10GE_VERSION_STR "1.4.3-1.378"
  79
  80 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
  81 MODULE_AUTHOR("Maintainer: help@myri.com");
  82 MODULE_VERSION(MYRI10GE_VERSION_STR);
  83 MODULE_LICENSE("Dual BSD/GPL");
  84
  85 #define MYRI10GE_MAX_ETHER_MTU 9014
  86
  87 #define MYRI10GE_ETH_STOPPED 0
  88 #define MYRI10GE_ETH_STOPPING 1
  89 #define MYRI10GE_ETH_STARTING 2
  90 #define MYRI10GE_ETH_RUNNING 3
  91 #define MYRI10GE_ETH_OPEN_FAILED 4
  92
  93 #define MYRI10GE_EEPROM_STRINGS_SIZE 256
  94 #define MYRI10GE_MAX_SEND_DESC_TSO ((65536 / 2048) * 2)
  95 #define MYRI10GE_MAX_LRO_DESCRIPTORS 8
  96 #define MYRI10GE_LRO_MAX_PKTS 64
  97
  98 #define MYRI10GE_NO_CONFIRM_DATA htonl(0xffffffff)
  99 #define MYRI10GE_NO_RESPONSE_RESULT 0xffffffff
 100
 101 #define MYRI10GE_ALLOC_ORDER 0
 102 #define MYRI10GE_ALLOC_SIZE ((1 << MYRI10GE_ALLOC_ORDER) * PAGE_SIZE)
 103 #define MYRI10GE_MAX_FRAGS_PER_FRAME (MYRI10GE_MAX_ETHER_MTU/MYRI10GE_ALLOC_SIZE + 1)
 104
 105 #define MYRI10GE_MAX_SLICES 32
 106
 107 struct myri10ge_rx_buffer_state {
 108         struct page *page;
 109         int page_offset;
 110          DECLARE_PCI_UNMAP_ADDR(bus)
 111          DECLARE_PCI_UNMAP_LEN(len)
 112 };
 113
 114 struct myri10ge_tx_buffer_state {
 115         struct sk_buff *skb;
 116         int last;
 117          DECLARE_PCI_UNMAP_ADDR(bus)
 118          DECLARE_PCI_UNMAP_LEN(len)
 119 };
 120
 121 struct myri10ge_cmd {
 122         u32 data0;
 123         u32 data1;
 124         u32 data2;
 125 };
 126
 127 struct myri10ge_rx_buf {
 128         struct mcp_kreq_ether_recv __iomem *lanai;      /* lanai ptr for recv ring */
 129         struct mcp_kreq_ether_recv *shadow;     /* host shadow of recv ring */
 130         struct myri10ge_rx_buffer_state *info;
 131         struct page *page;
 132         dma_addr_t bus;
 133         int page_offset;
 134         int cnt;
 135         int fill_cnt;
 136         int alloc_fail;
 137         int mask;               /* number of rx slots -1 */
 138         int watchdog_needed;
 139 };
 140
 141 struct myri10ge_tx_buf {
 142         struct mcp_kreq_ether_send __iomem *lanai;      /* lanai ptr for sendq */
 143         __be32 __iomem *send_go;        /* "go" doorbell ptr */
 144         __be32 __iomem *send_stop;      /* "stop" doorbell ptr */
 145         struct mcp_kreq_ether_send *req_list;   /* host shadow of sendq */
 146         char *req_bytes;
 147         struct myri10ge_tx_buffer_state *info;
 148         int mask;               /* number of transmit slots -1  */
 149         int req ____cacheline_aligned;  /* transmit slots submitted     */
 150         int pkt_start;          /* packets started */
 151         int stop_queue;
 152         int linearized;
 153         int done ____cacheline_aligned; /* transmit slots completed     */
 154         int pkt_done;           /* packets completed */
 155         int wake_queue;
 156         int queue_active;
 157 };
 158
 159 struct myri10ge_rx_done {
 160         struct mcp_slot *entry;
 161         dma_addr_t bus;
 162         int cnt;
 163         int idx;
 164         struct net_lro_mgr lro_mgr;
 165         struct net_lro_desc lro_desc[MYRI10GE_MAX_LRO_DESCRIPTORS];
 166 };
 167
 168 struct myri10ge_slice_netstats {
 169         unsigned long rx_packets;
 170         unsigned long tx_packets;
 171         unsigned long rx_bytes;
 172         unsigned long tx_bytes;
 173         unsigned long rx_dropped;
 174         unsigned long tx_dropped;
 175 };
 176
 177 struct myri10ge_slice_state {
 178         struct myri10ge_tx_buf tx;      /* transmit ring        */
 179         struct myri10ge_rx_buf rx_small;
 180         struct myri10ge_rx_buf rx_big;
 181         struct myri10ge_rx_done rx_done;
 182         struct net_device *dev;
 183         struct napi_struct napi;
 184         struct myri10ge_priv *mgp;
 185         struct myri10ge_slice_netstats stats;
 186         __be32 __iomem *irq_claim;
 187         struct mcp_irq_data *fw_stats;
 188         dma_addr_t fw_stats_bus;
 189         int watchdog_tx_done;
 190         int watchdog_tx_req;
 191 #ifdef CONFIG_MYRI10GE_DCA
 192         int cached_dca_tag;
 193         int cpu;
 194         __be32 __iomem *dca_tag;
 195 #endif
 196         char irq_desc[32];
 197 };
 198
 199 struct myri10ge_priv {
 200         struct myri10ge_slice_state *ss;
 201         int tx_boundary;        /* boundary transmits cannot cross */
 202         int num_slices;
 203         int running;            /* running?             */
 204         int csum_flag;          /* rx_csums?            */
 205         int small_bytes;
 206         int big_bytes;
 207         int max_intr_slots;
 208         struct net_device *dev;
 209         struct net_device_stats stats;
 210         spinlock_t stats_lock;
 211         u8 __iomem *sram;
 212         int sram_size;
 213         unsigned long board_span;
 214         unsigned long iomem_base;
 215         __be32 __iomem *irq_deassert;
 216         char *mac_addr_string;
 217         struct mcp_cmd_response *cmd;
 218         dma_addr_t cmd_bus;
 219         struct pci_dev *pdev;
 220         int msi_enabled;
 221         int msix_enabled;
 222         struct msix_entry *msix_vectors;
 223 #ifdef CONFIG_MYRI10GE_DCA
 224         int dca_enabled;
 225 #endif
 226         u32 link_state;
 227         unsigned int rdma_tags_available;
 228         int intr_coal_delay;
 229         __be32 __iomem *intr_coal_delay_ptr;
 230         int mtrr;
 231         int wc_enabled;
 232         int down_cnt;
 233         wait_queue_head_t down_wq;
 234         struct work_struct watchdog_work;
 235         struct timer_list watchdog_timer;
 236         int watchdog_resets;
 237         int watchdog_pause;
 238         int pause;
 239         char *fw_name;
 240         char eeprom_strings[MYRI10GE_EEPROM_STRINGS_SIZE];
 241         char *product_code_string;
 242         char fw_version[128];
 243         int fw_ver_major;
 244         int fw_ver_minor;
 245         int fw_ver_tiny;
 246         int adopted_rx_filter_bug;
 247         u8 mac_addr[6];         /* eeprom mac address */
 248         unsigned long serial_number;
 249         int vendor_specific_offset;
 250         int fw_multicast_support;
 251         unsigned long features;
 252         u32 max_tso6;
 253         u32 read_dma;
 254         u32 write_dma;
 255         u32 read_write_dma;
 256         u32 link_changes;
 257         u32 msg_enable;
 258 };
 259
 260 static char *myri10ge_fw_unaligned = "myri10ge_ethp_z8e.dat";
 261 static char *myri10ge_fw_aligned = "myri10ge_eth_z8e.dat";
 262 static char *myri10ge_fw_rss_unaligned = "myri10ge_rss_ethp_z8e.dat";
 263 static char *myri10ge_fw_rss_aligned = "myri10ge_rss_eth_z8e.dat";
 264
 265 static char *myri10ge_fw_name = NULL;
 266 module_param(myri10ge_fw_name, charp, S_IRUGO | S_IWUSR);
 267 MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image name");
 268
 269 static int myri10ge_ecrc_enable = 1;
 270 module_param(myri10ge_ecrc_enable, int, S_IRUGO);
 271 MODULE_PARM_DESC(myri10ge_ecrc_enable, "Enable Extended CRC on PCI-E");
 272
 273 static int myri10ge_small_bytes = -1;   /* -1 == auto */
 274 module_param(myri10ge_small_bytes, int, S_IRUGO | S_IWUSR);
 275 MODULE_PARM_DESC(myri10ge_small_bytes, "Threshold of small packets");
 276
 277 static int myri10ge_msi = 1;    /* enable msi by default */
 278 module_param(myri10ge_msi, int, S_IRUGO | S_IWUSR);
 279 MODULE_PARM_DESC(myri10ge_msi, "Enable Message Signalled Interrupts");
 280
 281 static int myri10ge_intr_coal_delay = 75;
 282 module_param(myri10ge_intr_coal_delay, int, S_IRUGO);
 283 MODULE_PARM_DESC(myri10ge_intr_coal_delay, "Interrupt coalescing delay");
 284
 285 static int myri10ge_flow_control = 1;
 286 module_param(myri10ge_flow_control, int, S_IRUGO);
 287 MODULE_PARM_DESC(myri10ge_flow_control, "Pause parameter");
 288
 289 static int myri10ge_deassert_wait = 1;
 290 module_param(myri10ge_deassert_wait, int, S_IRUGO | S_IWUSR);
 291 MODULE_PARM_DESC(myri10ge_deassert_wait,
 292                  "Wait when deasserting legacy interrupts");
 293
 294 static int myri10ge_force_firmware = 0;
 295 module_param(myri10ge_force_firmware, int, S_IRUGO);
 296 MODULE_PARM_DESC(myri10ge_force_firmware,
 297                  "Force firmware to assume aligned completions");
 298
 299 static int myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
 300 module_param(myri10ge_initial_mtu, int, S_IRUGO);
 301 MODULE_PARM_DESC(myri10ge_initial_mtu, "Initial MTU");
 302
 303 static int myri10ge_napi_weight = 64;
 304 module_param(myri10ge_napi_weight, int, S_IRUGO);
 305 MODULE_PARM_DESC(myri10ge_napi_weight, "Set NAPI weight");
 306
 307 static int myri10ge_watchdog_timeout = 1;
 308 module_param(myri10ge_watchdog_timeout, int, S_IRUGO);
 309 MODULE_PARM_DESC(myri10ge_watchdog_timeout, "Set watchdog timeout");
 310
 311 static int myri10ge_max_irq_loops = 1048576;
 312 module_param(myri10ge_max_irq_loops, int, S_IRUGO);
 313 MODULE_PARM_DESC(myri10ge_max_irq_loops,
 314                  "Set stuck legacy IRQ detection threshold");
 315
 316 #define MYRI10GE_MSG_DEFAULT NETIF_MSG_LINK
 317
 318 static int myri10ge_debug = -1; /* defaults above */
 319 module_param(myri10ge_debug, int, 0);
 320 MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)");
 321
 322 static int myri10ge_lro = 1;
 323 module_param(myri10ge_lro, int, S_IRUGO);
 324 MODULE_PARM_DESC(myri10ge_lro, "Enable large receive offload");
 325
 326 static int myri10ge_lro_max_pkts = MYRI10GE_LRO_MAX_PKTS;
 327 module_param(myri10ge_lro_max_pkts, int, S_IRUGO);
 328 MODULE_PARM_DESC(myri10ge_lro_max_pkts,
 329                  "Number of LRO packets to be aggregated");
 330
 331 static int myri10ge_fill_thresh = 256;
 332 module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR);
 333 MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed");
 334
 335 static int myri10ge_reset_recover = 1;
 336
 337 static int myri10ge_max_slices = 1;
 338 module_param(myri10ge_max_slices, int, S_IRUGO);
 339 MODULE_PARM_DESC(myri10ge_max_slices, "Max tx/rx queues");
 340
 341 static int myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
 342 module_param(myri10ge_rss_hash, int, S_IRUGO);
 343 MODULE_PARM_DESC(myri10ge_rss_hash, "Type of RSS hashing to do");
 344
 345 static int myri10ge_dca = 1;
 346 module_param(myri10ge_dca, int, S_IRUGO);
 347 MODULE_PARM_DESC(myri10ge_dca, "Enable DCA if possible");
 348
 349 #define MYRI10GE_FW_OFFSET 1024*1024
 350 #define MYRI10GE_HIGHPART_TO_U32(X) \
 351 (sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
 352 #define MYRI10GE_LOWPART_TO_U32(X) ((u32)(X))
 353
 354 #define myri10ge_pio_copy(to,from,size) __iowrite64_copy(to,from,size/8)
 355
 356 static void myri10ge_set_multicast_list(struct net_device *dev);
 357 static int myri10ge_sw_tso(struct sk_buff *skb, struct net_device *dev);
 358
 359 static inline void put_be32(__be32 val, __be32 __iomem * p)
 360 {
 361         __raw_writel((__force __u32) val, (__force void __iomem *)p);
 362 }
 363
 364 static int
 365 myri10ge_send_cmd(struct myri10ge_priv *mgp, u32 cmd,
 366                   struct myri10ge_cmd *data, int atomic)
 367 {
 368         struct mcp_cmd *buf;
 369         char buf_bytes[sizeof(*buf) + 8];
 370         struct mcp_cmd_response *response = mgp->cmd;
 371         char __iomem *cmd_addr = mgp->sram + MXGEFW_ETH_CMD;
 372         u32 dma_low, dma_high, result, value;
 373         int sleep_total = 0;
 374
 375         /* ensure buf is aligned to 8 bytes */
 376         buf = (struct mcp_cmd *)ALIGN((unsigned long)buf_bytes, 8);
 377
 378         buf->data0 = htonl(data->data0);
 379         buf->data1 = htonl(data->data1);
 380         buf->data2 = htonl(data->data2);
 381         buf->cmd = htonl(cmd);
 382         dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
 383         dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
 384
 385         buf->response_addr.low = htonl(dma_low);
 386         buf->response_addr.high = htonl(dma_high);
 387         response->result = htonl(MYRI10GE_NO_RESPONSE_RESULT);
 388         mb();
 389         myri10ge_pio_copy(cmd_addr, buf, sizeof(*buf));
 390
 391         /* wait up to 15ms. Longest command is the DMA benchmark,
 392          * which is capped at 5ms, but runs from a timeout handler
 393          * that runs every 7.8ms. So a 15ms timeout leaves us with
 394          * a 2.2ms margin
 395          */
 396         if (atomic) {
 397                 /* if atomic is set, do not sleep,
 398                  * and try to get the completion quickly
 399                  * (1ms will be enough for those commands) */
 400                 for (sleep_total = 0;
 401                      sleep_total < 1000
 402                      && response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
 403                      sleep_total += 10) {
 404                         udelay(10);
 405                         mb();
 406                 }
 407         } else {
 408                 /* use msleep for most command */
 409                 for (sleep_total = 0;
 410                      sleep_total < 15
 411                      && response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
 412                      sleep_total++)
 413                         msleep(1);
 414         }
 415
 416         result = ntohl(response->result);
 417         value = ntohl(response->data);
 418         if (result != MYRI10GE_NO_RESPONSE_RESULT) {
 419                 if (result == 0) {
 420                         data->data0 = value;
 421                         return 0;
 422                 } else if (result == MXGEFW_CMD_UNKNOWN) {
 423                         return -ENOSYS;
 424                 } else if (result == MXGEFW_CMD_ERROR_UNALIGNED) {
 425                         return -E2BIG;
 426                 } else if (result == MXGEFW_CMD_ERROR_RANGE &&
 427                            cmd == MXGEFW_CMD_ENABLE_RSS_QUEUES &&
 428                            (data->
 429                             data1 & MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES) !=
 430                            0) {
 431                         return -ERANGE;
 432                 } else {
 433                         dev_err(&mgp->pdev->dev,
 434                                 "command %d failed, result = %d\n",
 435                                 cmd, result);
 436                         return -ENXIO;
 437                 }
 438         }
 439
 440         dev_err(&mgp->pdev->dev, "command %d timed out, result = %d\n",
 441                 cmd, result);
 442         return -EAGAIN;
 443 }
 444
 445 /*
 446  * The eeprom strings on the lanaiX have the format
 447  * SN=x\0
 448  * MAC=x:x:x:x:x:x\0
 449  * PT:ddd mmm xx xx:xx:xx xx\0
 450  * PV:ddd mmm xx xx:xx:xx xx\0
 451  */
 452 static int myri10ge_read_mac_addr(struct myri10ge_priv *mgp)
 453 {
 454         char *ptr, *limit;
 455         int i;
 456
 457         ptr = mgp->eeprom_strings;
 458         limit = mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE;
 459
 460         while (*ptr != '\0' && ptr < limit) {
 461                 if (memcmp(ptr, "MAC=", 4) == 0) {
 462                         ptr += 4;
 463                         mgp->mac_addr_string = ptr;
 464                         for (i = 0; i < 6; i++) {
 465                                 if ((ptr + 2) > limit)
 466                                         goto abort;
 467                                 mgp->mac_addr[i] =
 468                                     simple_strtoul(ptr, &ptr, 16);
 469                                 ptr += 1;
 470                         }
 471                 }
 472                 if (memcmp(ptr, "PC=", 3) == 0) {
 473                         ptr += 3;
 474                         mgp->product_code_string = ptr;
 475                 }
 476                 if (memcmp((const void *)ptr, "SN=", 3) == 0) {
 477                         ptr += 3;
 478                         mgp->serial_number = simple_strtoul(ptr, &ptr, 10);
 479                 }
 480                 while (ptr < limit && *ptr++) ;
 481         }
 482
 483         return 0;
 484
 485 abort:
 486         dev_err(&mgp->pdev->dev, "failed to parse eeprom_strings\n");
 487         return -ENXIO;
 488 }
 489
 490 /*
 491  * Enable or disable periodic RDMAs from the host to make certain
 492  * chipsets resend dropped PCIe messages
 493  */
 494
 495 static void myri10ge_dummy_rdma(struct myri10ge_priv *mgp, int enable)
 496 {
 497         char __iomem *submit;
 498         __be32 buf[16] __attribute__ ((__aligned__(8)));
 499         u32 dma_low, dma_high;
 500         int i;
 501
 502         /* clear confirmation addr */
 503         mgp->cmd->data = 0;
 504         mb();
 505
 506         /* send a rdma command to the PCIe engine, and wait for the
 507          * response in the confirmation address.  The firmware should
 508          * write a -1 there to indicate it is alive and well
 509          */
 510         dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
 511         dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
 512
 513         buf[0] = htonl(dma_high);       /* confirm addr MSW */
 514         buf[1] = htonl(dma_low);        /* confirm addr LSW */
 515         buf[2] = MYRI10GE_NO_CONFIRM_DATA;      /* confirm data */
 516         buf[3] = htonl(dma_high);       /* dummy addr MSW */
 517         buf[4] = htonl(dma_low);        /* dummy addr LSW */
 518         buf[5] = htonl(enable); /* enable? */
 519
 520         submit = mgp->sram + MXGEFW_BOOT_DUMMY_RDMA;
 521
 522         myri10ge_pio_copy(submit, &buf, sizeof(buf));
 523         for (i = 0; mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 20; i++)
 524                 msleep(1);
 525         if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA)
 526                 dev_err(&mgp->pdev->dev, "dummy rdma %s failed\n",
 527                         (enable ? "enable" : "disable"));
 528 }
 529
 530 static int
 531 myri10ge_validate_firmware(struct myri10ge_priv *mgp,
 532                            struct mcp_gen_header *hdr)
 533 {
 534         struct device *dev = &mgp->pdev->dev;
 535
 536         /* check firmware type */
 537         if (ntohl(hdr->mcp_type) != MCP_TYPE_ETH) {
 538                 dev_err(dev, "Bad firmware type: 0x%x\n", ntohl(hdr->mcp_type));
 539                 return -EINVAL;
 540         }
 541
 542         /* save firmware version for ethtool */
 543         strncpy(mgp->fw_version, hdr->version, sizeof(mgp->fw_version));
 544
 545         sscanf(mgp->fw_version, "%d.%d.%d", &mgp->fw_ver_major,
 546                &mgp->fw_ver_minor, &mgp->fw_ver_tiny);
 547
 548         if (!(mgp->fw_ver_major == MXGEFW_VERSION_MAJOR
 549               && mgp->fw_ver_minor == MXGEFW_VERSION_MINOR)) {
 550                 dev_err(dev, "Found firmware version %s\n", mgp->fw_version);
 551                 dev_err(dev, "Driver needs %d.%d\n", MXGEFW_VERSION_MAJOR,
 552                         MXGEFW_VERSION_MINOR);
 553                 return -EINVAL;
 554         }
 555         return 0;
 556 }
 557
 558 static int myri10ge_load_hotplug_firmware(struct myri10ge_priv *mgp, u32 * size)
 559 {
 560         unsigned crc, reread_crc;
 561         const struct firmware *fw;
 562         struct device *dev = &mgp->pdev->dev;
 563         unsigned char *fw_readback;
 564         struct mcp_gen_header *hdr;
 565         size_t hdr_offset;
 566         int status;
 567         unsigned i;
 568
 569         if ((status = request_firmware(&fw, mgp->fw_name, dev)) < 0) {
 570                 dev_err(dev, "Unable to load %s firmware image via hotplug\n",
 571                         mgp->fw_name);
 572                 status = -EINVAL;
 573                 goto abort_with_nothing;
 574         }
 575
 576         /* check size */
 577
 578         if (fw->size >= mgp->sram_size - MYRI10GE_FW_OFFSET ||
 579             fw->size < MCP_HEADER_PTR_OFFSET + 4) {
 580                 dev_err(dev, "Firmware size invalid:%d\n", (int)fw->size);
 581                 status = -EINVAL;
 582                 goto abort_with_fw;
 583         }
 584
 585         /* check id */
 586         hdr_offset = ntohl(*(__be32 *) (fw->data + MCP_HEADER_PTR_OFFSET));
 587         if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > fw->size) {
 588                 dev_err(dev, "Bad firmware file\n");
 589                 status = -EINVAL;
 590                 goto abort_with_fw;
 591         }
 592         hdr = (void *)(fw->data + hdr_offset);
 593
 594         status = myri10ge_validate_firmware(mgp, hdr);
 595         if (status != 0)
 596                 goto abort_with_fw;
 597
 598         crc = crc32(~0, fw->data, fw->size);
 599         for (i = 0; i < fw->size; i += 256) {
 600                 myri10ge_pio_copy(mgp->sram + MYRI10GE_FW_OFFSET + i,
 601                                   fw->data + i,
 602                                   min(256U, (unsigned)(fw->size - i)));
 603                 mb();
 604                 readb(mgp->sram);
 605         }
 606         fw_readback = vmalloc(fw->size);
 607         if (!fw_readback) {
 608                 status = -ENOMEM;
 609                 goto abort_with_fw;
 610         }
 611         /* corruption checking is good for parity recovery and buggy chipset */
 612         memcpy_fromio(fw_readback, mgp->sram + MYRI10GE_FW_OFFSET, fw->size);
 613         reread_crc = crc32(~0, fw_readback, fw->size);
 614         vfree(fw_readback);
 615         if (crc != reread_crc) {
 616                 dev_err(dev, "CRC failed(fw-len=%u), got 0x%x (expect 0x%x)\n",
 617                         (unsigned)fw->size, reread_crc, crc);
 618                 status = -EIO;
 619                 goto abort_with_fw;
 620         }
 621         *size = (u32) fw->size;
 622
 623 abort_with_fw:
 624         release_firmware(fw);
 625
 626 abort_with_nothing:
 627         return status;
 628 }
 629
 630 static int myri10ge_adopt_running_firmware(struct myri10ge_priv *mgp)
 631 {
 632         struct mcp_gen_header *hdr;
 633         struct device *dev = &mgp->pdev->dev;
 634         const size_t bytes = sizeof(struct mcp_gen_header);
 635         size_t hdr_offset;
 636         int status;
 637
 638         /* find running firmware header */
 639         hdr_offset = swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET));
 640
 641         if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > mgp->sram_size) {
 642                 dev_err(dev, "Running firmware has bad header offset (%d)\n",
 643                         (int)hdr_offset);
 644                 return -EIO;
 645         }
 646
 647         /* copy header of running firmware from SRAM to host memory to
 648          * validate firmware */
 649         hdr = kmalloc(bytes, GFP_KERNEL);
 650         if (hdr == NULL) {
 651                 dev_err(dev, "could not malloc firmware hdr\n");
 652                 return -ENOMEM;
 653         }
 654         memcpy_fromio(hdr, mgp->sram + hdr_offset, bytes);
 655         status = myri10ge_validate_firmware(mgp, hdr);
 656         kfree(hdr);
 657
 658         /* check to see if adopted firmware has bug where adopting
 659          * it will cause broadcasts to be filtered unless the NIC
 660          * is kept in ALLMULTI mode */
 661         if (mgp->fw_ver_major == 1 && mgp->fw_ver_minor == 4 &&
 662             mgp->fw_ver_tiny >= 4 && mgp->fw_ver_tiny <= 11) {
 663                 mgp->adopted_rx_filter_bug = 1;
 664                 dev_warn(dev, "Adopting fw %d.%d.%d: "
 665                          "working around rx filter bug\n",
 666                          mgp->fw_ver_major, mgp->fw_ver_minor,
 667                          mgp->fw_ver_tiny);
 668         }
 669         return status;
 670 }
 671
 672 static int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp)
 673 {
 674         struct myri10ge_cmd cmd;
 675         int status;
 676
 677         /* probe for IPv6 TSO support */
 678         mgp->features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO;
 679         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
 680                                    &cmd, 0);
 681         if (status == 0) {
 682                 mgp->max_tso6 = cmd.data0;
 683                 mgp->features |= NETIF_F_TSO6;
 684         }
 685
 686         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
 687         if (status != 0) {
 688                 dev_err(&mgp->pdev->dev,
 689                         "failed MXGEFW_CMD_GET_RX_RING_SIZE\n");
 690                 return -ENXIO;
 691         }
 692
 693         mgp->max_intr_slots = 2 * (cmd.data0 / sizeof(struct mcp_dma_addr));
 694
 695         return 0;
 696 }
 697
 698 static int myri10ge_load_firmware(struct myri10ge_priv *mgp, int adopt)
 699 {
 700         char __iomem *submit;
 701         __be32 buf[16] __attribute__ ((__aligned__(8)));
 702         u32 dma_low, dma_high, size;
 703         int status, i;
 704
 705         size = 0;
 706         status = myri10ge_load_hotplug_firmware(mgp, &size);
 707         if (status) {
 708                 if (!adopt)
 709                         return status;
 710                 dev_warn(&mgp->pdev->dev, "hotplug firmware loading failed\n");
 711
 712                 /* Do not attempt to adopt firmware if there
 713                  * was a bad crc */
 714                 if (status == -EIO)
 715                         return status;
 716
 717                 status = myri10ge_adopt_running_firmware(mgp);
 718                 if (status != 0) {
 719                         dev_err(&mgp->pdev->dev,
 720                                 "failed to adopt running firmware\n");
 721                         return status;
 722                 }
 723                 dev_info(&mgp->pdev->dev,
 724                          "Successfully adopted running firmware\n");
 725                 if (mgp->tx_boundary == 4096) {
 726                         dev_warn(&mgp->pdev->dev,
 727                                  "Using firmware currently running on NIC"
 728                                  ".  For optimal\n");
 729                         dev_warn(&mgp->pdev->dev,
 730                                  "performance consider loading optimized "
 731                                  "firmware\n");
 732                         dev_warn(&mgp->pdev->dev, "via hotplug\n");
 733                 }
 734
 735                 mgp->fw_name = "adopted";
 736                 mgp->tx_boundary = 2048;
 737                 myri10ge_dummy_rdma(mgp, 1);
 738                 status = myri10ge_get_firmware_capabilities(mgp);
 739                 return status;
 740         }
 741
 742         /* clear confirmation addr */
 743         mgp->cmd->data = 0;
 744         mb();
 745
 746         /* send a reload command to the bootstrap MCP, and wait for the
 747          *  response in the confirmation address.  The firmware should
 748          * write a -1 there to indicate it is alive and well
 749          */
 750         dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
 751         dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
 752
 753         buf[0] = htonl(dma_high);       /* confirm addr MSW */
 754         buf[1] = htonl(dma_low);        /* confirm addr LSW */
 755         buf[2] = MYRI10GE_NO_CONFIRM_DATA;      /* confirm data */
 756
 757         /* FIX: All newest firmware should un-protect the bottom of
 758          * the sram before handoff. However, the very first interfaces
 759          * do not. Therefore the handoff copy must skip the first 8 bytes
 760          */
 761         buf[3] = htonl(MYRI10GE_FW_OFFSET + 8); /* where the code starts */
 762         buf[4] = htonl(size - 8);       /* length of code */
 763         buf[5] = htonl(8);      /* where to copy to */
 764         buf[6] = htonl(0);      /* where to jump to */
 765
 766         submit = mgp->sram + MXGEFW_BOOT_HANDOFF;
 767
 768         myri10ge_pio_copy(submit, &buf, sizeof(buf));
 769         mb();
 770         msleep(1);
 771         mb();
 772         i = 0;
 773         while (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 9) {
 774                 msleep(1 << i);
 775                 i++;
 776         }
 777         if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA) {
 778                 dev_err(&mgp->pdev->dev, "handoff failed\n");
 779                 return -ENXIO;
 780         }
 781         myri10ge_dummy_rdma(mgp, 1);
 782         status = myri10ge_get_firmware_capabilities(mgp);
 783
 784         return status;
 785 }
 786
 787 static int myri10ge_update_mac_address(struct myri10ge_priv *mgp, u8 * addr)
 788 {
 789         struct myri10ge_cmd cmd;
 790         int status;
 791
 792         cmd.data0 = ((addr[0] << 24) | (addr[1] << 16)
 793                      | (addr[2] << 8) | addr[3]);
 794
 795         cmd.data1 = ((addr[4] << 8) | (addr[5]));
 796
 797         status = myri10ge_send_cmd(mgp, MXGEFW_SET_MAC_ADDRESS, &cmd, 0);
 798         return status;
 799 }
 800
 801 static int myri10ge_change_pause(struct myri10ge_priv *mgp, int pause)
 802 {
 803         struct myri10ge_cmd cmd;
 804         int status, ctl;
 805
 806         ctl = pause ? MXGEFW_ENABLE_FLOW_CONTROL : MXGEFW_DISABLE_FLOW_CONTROL;
 807         status = myri10ge_send_cmd(mgp, ctl, &cmd, 0);
 808
 809         if (status) {
 810                 printk(KERN_ERR
 811                        "myri10ge: %s: Failed to set flow control mode\n",
 812                        mgp->dev->name);
 813                 return status;
 814         }
 815         mgp->pause = pause;
 816         return 0;
 817 }
 818
 819 static void
 820 myri10ge_change_promisc(struct myri10ge_priv *mgp, int promisc, int atomic)
 821 {
 822         struct myri10ge_cmd cmd;
 823         int status, ctl;
 824
 825         ctl = promisc ? MXGEFW_ENABLE_PROMISC : MXGEFW_DISABLE_PROMISC;
 826         status = myri10ge_send_cmd(mgp, ctl, &cmd, atomic);
 827         if (status)
 828                 printk(KERN_ERR "myri10ge: %s: Failed to set promisc mode\n",
 829                        mgp->dev->name);
 830 }
 831
 832 static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type)
 833 {
 834         struct myri10ge_cmd cmd;
 835         int status;
 836         u32 len;
 837         struct page *dmatest_page;
 838         dma_addr_t dmatest_bus;
 839         char *test = " ";
 840
 841         dmatest_page = alloc_page(GFP_KERNEL);
 842         if (!dmatest_page)
 843                 return -ENOMEM;
 844         dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE,
 845                                    DMA_BIDIRECTIONAL);
 846
 847         /* Run a small DMA test.
 848          * The magic multipliers to the length tell the firmware
 849          * to do DMA read, write, or read+write tests.  The
 850          * results are returned in cmd.data0.  The upper 16
 851          * bits or the return is the number of transfers completed.
 852          * The lower 16 bits is the time in 0.5us ticks that the
 853          * transfers took to complete.
 854          */
 855
 856         len = mgp->tx_boundary;
 857
 858         cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
 859         cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
 860         cmd.data2 = len * 0x10000;
 861         status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
 862         if (status != 0) {
 863                 test = "read";
 864                 goto abort;
 865         }
 866         mgp->read_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
 867         cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
 868         cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
 869         cmd.data2 = len * 0x1;
 870         status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
 871         if (status != 0) {
 872                 test = "write";
 873                 goto abort;
 874         }
 875         mgp->write_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
 876
 877         cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
 878         cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
 879         cmd.data2 = len * 0x10001;
 880         status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
 881         if (status != 0) {
 882                 test = "read/write";
 883                 goto abort;
 884         }
 885         mgp->read_write_dma = ((cmd.data0 >> 16) * len * 2 * 2) /
 886             (cmd.data0 & 0xffff);
 887
 888 abort:
 889         pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL);
 890         put_page(dmatest_page);
 891
 892         if (status != 0 && test_type != MXGEFW_CMD_UNALIGNED_TEST)
 893                 dev_warn(&mgp->pdev->dev, "DMA %s benchmark failed: %d\n",
 894                          test, status);
 895
 896         return status;
 897 }
 898
 899 static int myri10ge_reset(struct myri10ge_priv *mgp)
 900 {
 901         struct myri10ge_cmd cmd;
 902         struct myri10ge_slice_state *ss;
 903         int i, status;
 904         size_t bytes;
 905 #ifdef CONFIG_MYRI10GE_DCA
 906         unsigned long dca_tag_off;
 907 #endif
 908
 909         /* try to send a reset command to the card to see if it
 910          * is alive */
 911         memset(&cmd, 0, sizeof(cmd));
 912         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
 913         if (status != 0) {
 914                 dev_err(&mgp->pdev->dev, "failed reset\n");
 915                 return -ENXIO;
 916         }
 917
 918         (void)myri10ge_dma_test(mgp, MXGEFW_DMA_TEST);
 919         /*
 920          * Use non-ndis mcp_slot (eg, 4 bytes total,
 921          * no toeplitz hash value returned.  Older firmware will
 922          * not understand this command, but will use the correct
 923          * sized mcp_slot, so we ignore error returns
 924          */
 925         cmd.data0 = MXGEFW_RSS_MCP_SLOT_TYPE_MIN;
 926         (void)myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE, &cmd, 0);
 927
 928         /* Now exchange information about interrupts  */
 929
 930         bytes = mgp->max_intr_slots * sizeof(*mgp->ss[0].rx_done.entry);
 931         cmd.data0 = (u32) bytes;
 932         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
 933
 934         /*
 935          * Even though we already know how many slices are supported
 936          * via myri10ge_probe_slices() MXGEFW_CMD_GET_MAX_RSS_QUEUES
 937          * has magic side effects, and must be called after a reset.
 938          * It must be called prior to calling any RSS related cmds,
 939          * including assigning an interrupt queue for anything but
 940          * slice 0.  It must also be called *after*
 941          * MXGEFW_CMD_SET_INTRQ_SIZE, since the intrq size is used by
 942          * the firmware to compute offsets.
 943          */
 944
 945         if (mgp->num_slices > 1) {
 946
 947                 /* ask the maximum number of slices it supports */
 948                 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES,
 949                                            &cmd, 0);
 950                 if (status != 0) {
 951                         dev_err(&mgp->pdev->dev,
 952                                 "failed to get number of slices\n");
 953                 }
 954
 955                 /*
 956                  * MXGEFW_CMD_ENABLE_RSS_QUEUES must be called prior
 957                  * to setting up the interrupt queue DMA
 958                  */
 959
 960                 cmd.data0 = mgp->num_slices;
 961                 cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
 962                 if (mgp->dev->real_num_tx_queues > 1)
 963                         cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
 964                 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
 965                                            &cmd, 0);
 966
 967                 /* Firmware older than 1.4.32 only supports multiple
 968                  * RX queues, so if we get an error, first retry using a
 969                  * single TX queue before giving up */
 970                 if (status != 0 && mgp->dev->real_num_tx_queues > 1) {
 971                         mgp->dev->real_num_tx_queues = 1;
 972                         cmd.data0 = mgp->num_slices;
 973                         cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
 974                         status = myri10ge_send_cmd(mgp,
 975                                                    MXGEFW_CMD_ENABLE_RSS_QUEUES,
 976                                                    &cmd, 0);
 977                 }
 978
 979                 if (status != 0) {
 980                         dev_err(&mgp->pdev->dev,
 981                                 "failed to set number of slices\n");
 982
 983                         return status;
 984                 }
 985         }
 986         for (i = 0; i < mgp->num_slices; i++) {
 987                 ss = &mgp->ss[i];
 988                 cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->rx_done.bus);
 989                 cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->rx_done.bus);
 990                 cmd.data2 = i;
 991                 status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_DMA,
 992                                             &cmd, 0);
 993         };
 994
 995         status |=
 996             myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_ACK_OFFSET, &cmd, 0);
 997         for (i = 0; i < mgp->num_slices; i++) {
 998                 ss = &mgp->ss[i];
 999                 ss->irq_claim =
1000                     (__iomem __be32 *) (mgp->sram + cmd.data0 + 8 * i);
1001         }
1002         status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
1003                                     &cmd, 0);
1004         mgp->irq_deassert = (__iomem __be32 *) (mgp->sram + cmd.data0);
1005
1006         status |= myri10ge_send_cmd
1007             (mgp, MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET, &cmd, 0);
1008         mgp->intr_coal_delay_ptr = (__iomem __be32 *) (mgp->sram + cmd.data0);
1009         if (status != 0) {
1010                 dev_err(&mgp->pdev->dev, "failed set interrupt parameters\n");
1011                 return status;
1012         }
1013         put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
1014
1015 #ifdef CONFIG_MYRI10GE_DCA
1016         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_DCA_OFFSET, &cmd, 0);
1017         dca_tag_off = cmd.data0;
1018         for (i = 0; i < mgp->num_slices; i++) {
1019                 ss = &mgp->ss[i];
1020                 if (status == 0) {
1021                         ss->dca_tag = (__iomem __be32 *)
1022                             (mgp->sram + dca_tag_off + 4 * i);
1023                 } else {
1024                         ss->dca_tag = NULL;
1025                 }
1026         }
1027 #endif                          /* CONFIG_DCA */
1028
1029         /* reset mcp/driver shared state back to 0 */
1030
1031         mgp->link_changes = 0;
1032         for (i = 0; i < mgp->num_slices; i++) {
1033                 ss = &mgp->ss[i];
1034
1035                 memset(ss->rx_done.entry, 0, bytes);
1036                 ss->tx.req = 0;
1037                 ss->tx.done = 0;
1038                 ss->tx.pkt_start = 0;
1039                 ss->tx.pkt_done = 0;
1040                 ss->rx_big.cnt = 0;
1041                 ss->rx_small.cnt = 0;
1042                 ss->rx_done.idx = 0;
1043                 ss->rx_done.cnt = 0;
1044                 ss->tx.wake_queue = 0;
1045                 ss->tx.stop_queue = 0;
1046         }
1047
1048         status = myri10ge_update_mac_address(mgp, mgp->dev->dev_addr);
1049         myri10ge_change_pause(mgp, mgp->pause);
1050         myri10ge_set_multicast_list(mgp->dev);
1051         return status;
1052 }
1053
1054 #ifdef CONFIG_MYRI10GE_DCA
1055 static void
1056 myri10ge_write_dca(struct myri10ge_slice_state *ss, int cpu, int tag)
1057 {
1058         ss->cpu = cpu;
1059         ss->cached_dca_tag = tag;
1060         put_be32(htonl(tag), ss->dca_tag);
1061 }
1062
1063 static inline void myri10ge_update_dca(struct myri10ge_slice_state *ss)
1064 {
1065         int cpu = get_cpu();
1066         int tag;
1067
1068         if (cpu != ss->cpu) {
1069                 tag = dca_get_tag(cpu);
1070                 if (ss->cached_dca_tag != tag)
1071                         myri10ge_write_dca(ss, cpu, tag);
1072         }
1073         put_cpu();
1074 }
1075
1076 static void myri10ge_setup_dca(struct myri10ge_priv *mgp)
1077 {
1078         int err, i;
1079         struct pci_dev *pdev = mgp->pdev;
1080
1081         if (mgp->ss[0].dca_tag == NULL || mgp->dca_enabled)
1082                 return;
1083         if (!myri10ge_dca) {
1084                 dev_err(&pdev->dev, "dca disabled by administrator\n");
1085                 return;
1086         }
1087         err = dca_add_requester(&pdev->dev);
1088         if (err) {
1089                 if (err != -ENODEV)
1090                         dev_err(&pdev->dev,
1091                                 "dca_add_requester() failed, err=%d\n", err);
1092                 return;
1093         }
1094         mgp->dca_enabled = 1;
1095         for (i = 0; i < mgp->num_slices; i++)
1096                 myri10ge_write_dca(&mgp->ss[i], -1, 0);
1097 }
1098
1099 static void myri10ge_teardown_dca(struct myri10ge_priv *mgp)
1100 {
1101         struct pci_dev *pdev = mgp->pdev;
1102         int err;
1103
1104         if (!mgp->dca_enabled)
1105                 return;
1106         mgp->dca_enabled = 0;
1107         err = dca_remove_requester(&pdev->dev);
1108 }
1109
1110 static int myri10ge_notify_dca_device(struct device *dev, void *data)
1111 {
1112         struct myri10ge_priv *mgp;
1113         unsigned long event;
1114
1115         mgp = dev_get_drvdata(dev);
1116         event = *(unsigned long *)data;
1117
1118         if (event == DCA_PROVIDER_ADD)
1119                 myri10ge_setup_dca(mgp);
1120         else if (event == DCA_PROVIDER_REMOVE)
1121                 myri10ge_teardown_dca(mgp);
1122         return 0;
1123 }
1124 #endif                          /* CONFIG_DCA */
1125
1126 static inline void
1127 myri10ge_submit_8rx(struct mcp_kreq_ether_recv __iomem * dst,
1128                     struct mcp_kreq_ether_recv *src)
1129 {
1130         __be32 low;
1131
1132         low = src->addr_low;
1133         src->addr_low = htonl(DMA_32BIT_MASK);
1134         myri10ge_pio_copy(dst, src, 4 * sizeof(*src));
1135         mb();
1136         myri10ge_pio_copy(dst + 4, src + 4, 4 * sizeof(*src));
1137         mb();
1138         src->addr_low = low;
1139         put_be32(low, &dst->addr_low);
1140         mb();
1141 }
1142
1143 static inline void myri10ge_vlan_ip_csum(struct sk_buff *skb, __wsum hw_csum)
1144 {
1145         struct vlan_hdr *vh = (struct vlan_hdr *)(skb->data);
1146
1147         if ((skb->protocol == htons(ETH_P_8021Q)) &&
1148             (vh->h_vlan_encapsulated_proto == htons(ETH_P_IP) ||
1149              vh->h_vlan_encapsulated_proto == htons(ETH_P_IPV6))) {
1150                 skb->csum = hw_csum;
1151                 skb->ip_summed = CHECKSUM_COMPLETE;
1152         }
1153 }
1154
1155 static inline void
1156 myri10ge_rx_skb_build(struct sk_buff *skb, u8 * va,
1157                       struct skb_frag_struct *rx_frags, int len, int hlen)
1158 {
1159         struct skb_frag_struct *skb_frags;
1160
1161         skb->len = skb->data_len = len;
1162         skb->truesize = len + sizeof(struct sk_buff);
1163         /* attach the page(s) */
1164
1165         skb_frags = skb_shinfo(skb)->frags;
1166         while (len > 0) {
1167                 memcpy(skb_frags, rx_frags, sizeof(*skb_frags));
1168                 len -= rx_frags->size;
1169                 skb_frags++;
1170                 rx_frags++;
1171                 skb_shinfo(skb)->nr_frags++;
1172         }
1173
1174         /* pskb_may_pull is not available in irq context, but
1175          * skb_pull() (for ether_pad and eth_type_trans()) requires
1176          * the beginning of the packet in skb_headlen(), move it
1177          * manually */
1178         skb_copy_to_linear_data(skb, va, hlen);
1179         skb_shinfo(skb)->frags[0].page_offset += hlen;
1180         skb_shinfo(skb)->frags[0].size -= hlen;
1181         skb->data_len -= hlen;
1182         skb->tail += hlen;
1183         skb_pull(skb, MXGEFW_PAD);
1184 }
1185
1186 static void
1187 myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
1188                         int bytes, int watchdog)
1189 {
1190         struct page *page;
1191         int idx;
1192
1193         if (unlikely(rx->watchdog_needed && !watchdog))
1194                 return;
1195
1196         /* try to refill entire ring */
1197         while (rx->fill_cnt != (rx->cnt + rx->mask + 1)) {
1198                 idx = rx->fill_cnt & rx->mask;
1199                 if (rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE) {
1200                         /* we can use part of previous page */
1201                         get_page(rx->page);
1202                 } else {
1203                         /* we need a new page */
1204                         page =
1205                             alloc_pages(GFP_ATOMIC | __GFP_COMP,
1206                                         MYRI10GE_ALLOC_ORDER);
1207                         if (unlikely(page == NULL)) {
1208                                 if (rx->fill_cnt - rx->cnt < 16)
1209                                         rx->watchdog_needed = 1;
1210                                 return;
1211                         }
1212                         rx->page = page;
1213                         rx->page_offset = 0;
1214                         rx->bus = pci_map_page(mgp->pdev, page, 0,
1215                                                MYRI10GE_ALLOC_SIZE,
1216                                                PCI_DMA_FROMDEVICE);
1217                 }
1218                 rx->info[idx].page = rx->page;
1219                 rx->info[idx].page_offset = rx->page_offset;
1220                 /* note that this is the address of the start of the
1221                  * page */
1222                 pci_unmap_addr_set(&rx->info[idx], bus, rx->bus);
1223                 rx->shadow[idx].addr_low =
1224                     htonl(MYRI10GE_LOWPART_TO_U32(rx->bus) + rx->page_offset);
1225                 rx->shadow[idx].addr_high =
1226                     htonl(MYRI10GE_HIGHPART_TO_U32(rx->bus));
1227
1228                 /* start next packet on a cacheline boundary */
1229                 rx->page_offset += SKB_DATA_ALIGN(bytes);
1230
1231 #if MYRI10GE_ALLOC_SIZE > 4096
1232                 /* don't cross a 4KB boundary */
1233                 if ((rx->page_offset >> 12) !=
1234                     ((rx->page_offset + bytes - 1) >> 12))
1235                         rx->page_offset = (rx->page_offset + 4096) & ~4095;
1236 #endif
1237                 rx->fill_cnt++;
1238
1239                 /* copy 8 descriptors to the firmware at a time */
1240                 if ((idx & 7) == 7) {
1241                         myri10ge_submit_8rx(&rx->lanai[idx - 7],
1242                                             &rx->shadow[idx - 7]);
1243                 }
1244         }
1245 }
1246
1247 static inline void
1248 myri10ge_unmap_rx_page(struct pci_dev *pdev,
1249                        struct myri10ge_rx_buffer_state *info, int bytes)
1250 {
1251         /* unmap the recvd page if we're the only or last user of it */
1252         if (bytes >= MYRI10GE_ALLOC_SIZE / 2 ||
1253             (info->page_offset + 2 * bytes) > MYRI10GE_ALLOC_SIZE) {
1254                 pci_unmap_page(pdev, (pci_unmap_addr(info, bus)
1255                                       & ~(MYRI10GE_ALLOC_SIZE - 1)),
1256                                MYRI10GE_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
1257         }
1258 }
1259
1260 #define MYRI10GE_HLEN 64        /* The number of bytes to copy from a
1261                                  * page into an skb */
1262
1263 static inline int
1264 myri10ge_rx_done(struct myri10ge_slice_state *ss, struct myri10ge_rx_buf *rx,
1265                  int bytes, int len, __wsum csum)
1266 {
1267         struct myri10ge_priv *mgp = ss->mgp;
1268         struct sk_buff *skb;
1269         struct skb_frag_struct rx_frags[MYRI10GE_MAX_FRAGS_PER_FRAME];
1270         int i, idx, hlen, remainder;
1271         struct pci_dev *pdev = mgp->pdev;
1272         struct net_device *dev = mgp->dev;
1273         u8 *va;
1274
1275         len += MXGEFW_PAD;
1276         idx = rx->cnt & rx->mask;
1277         va = page_address(rx->info[idx].page) + rx->info[idx].page_offset;
1278         prefetch(va);
1279         /* Fill skb_frag_struct(s) with data from our receive */
1280         for (i = 0, remainder = len; remainder > 0; i++) {
1281                 myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes);
1282                 rx_frags[i].page = rx->info[idx].page;
1283                 rx_frags[i].page_offset = rx->info[idx].page_offset;
1284                 if (remainder < MYRI10GE_ALLOC_SIZE)
1285                         rx_frags[i].size = remainder;
1286                 else
1287                         rx_frags[i].size = MYRI10GE_ALLOC_SIZE;
1288                 rx->cnt++;
1289                 idx = rx->cnt & rx->mask;
1290                 remainder -= MYRI10GE_ALLOC_SIZE;
1291         }
1292
1293         if (mgp->csum_flag && myri10ge_lro) {
1294                 rx_frags[0].page_offset += MXGEFW_PAD;
1295                 rx_frags[0].size -= MXGEFW_PAD;
1296                 len -= MXGEFW_PAD;
1297                 lro_receive_frags(&ss->rx_done.lro_mgr, rx_frags,
1298                                   /* opaque, will come back in get_frag_header */
1299                                   len, len,
1300                                   (void *)(__force unsigned long)csum, csum);
1301
1302                 return 1;
1303         }
1304
1305         hlen = MYRI10GE_HLEN > len ? len : MYRI10GE_HLEN;
1306
1307         /* allocate an skb to attach the page(s) to. This is done
1308          * after trying LRO, so as to avoid skb allocation overheads */
1309
1310         skb = netdev_alloc_skb(dev, MYRI10GE_HLEN + 16);
1311         if (unlikely(skb == NULL)) {
1312                 ss->stats.rx_dropped++;
1313                 do {
1314                         i--;
1315                         put_page(rx_frags[i].page);
1316                 } while (i != 0);
1317                 return 0;
1318         }
1319
1320         /* Attach the pages to the skb, and trim off any padding */
1321         myri10ge_rx_skb_build(skb, va, rx_frags, len, hlen);
1322         if (skb_shinfo(skb)->frags[0].size <= 0) {
1323                 put_page(skb_shinfo(skb)->frags[0].page);
1324                 skb_shinfo(skb)->nr_frags = 0;
1325         }
1326         skb->protocol = eth_type_trans(skb, dev);
1327
1328         if (mgp->csum_flag) {
1329                 if ((skb->protocol == htons(ETH_P_IP)) ||
1330                     (skb->protocol == htons(ETH_P_IPV6))) {
1331                         skb->csum = csum;
1332                         skb->ip_summed = CHECKSUM_COMPLETE;
1333                 } else
1334                         myri10ge_vlan_ip_csum(skb, csum);
1335         }
1336         netif_receive_skb(skb);
1337         return 1;
1338 }
1339
1340 static inline void
1341 myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index)
1342 {
1343         struct pci_dev *pdev = ss->mgp->pdev;
1344         struct myri10ge_tx_buf *tx = &ss->tx;
1345         struct netdev_queue *dev_queue;
1346         struct sk_buff *skb;
1347         int idx, len;
1348
1349         while (tx->pkt_done != mcp_index) {
1350                 idx = tx->done & tx->mask;
1351                 skb = tx->info[idx].skb;
1352
1353                 /* Mark as free */
1354                 tx->info[idx].skb = NULL;
1355                 if (tx->info[idx].last) {
1356                         tx->pkt_done++;
1357                         tx->info[idx].last = 0;
1358                 }
1359                 tx->done++;
1360                 len = pci_unmap_len(&tx->info[idx], len);
1361                 pci_unmap_len_set(&tx->info[idx], len, 0);
1362                 if (skb) {
1363                         ss->stats.tx_bytes += skb->len;
1364                         ss->stats.tx_packets++;
1365                         dev_kfree_skb_irq(skb);
1366                         if (len)
1367                                 pci_unmap_single(pdev,
1368                                                  pci_unmap_addr(&tx->info[idx],
1369                                                                 bus), len,
1370                                                  PCI_DMA_TODEVICE);
1371                 } else {
1372                         if (len)
1373                                 pci_unmap_page(pdev,
1374                                                pci_unmap_addr(&tx->info[idx],
1375                                                               bus), len,
1376                                                PCI_DMA_TODEVICE);
1377                 }
1378         }
1379
1380         dev_queue = netdev_get_tx_queue(ss->dev, ss - ss->mgp->ss);
1381         /*
1382          * Make a minimal effort to prevent the NIC from polling an
1383          * idle tx queue.  If we can't get the lock we leave the queue
1384          * active. In this case, either a thread was about to start
1385          * using the queue anyway, or we lost a race and the NIC will
1386          * waste some of its resources polling an inactive queue for a
1387          * while.
1388          */
1389
1390         if ((ss->mgp->dev->real_num_tx_queues > 1) &&
1391             __netif_tx_trylock(dev_queue)) {
1392                 if (tx->req == tx->done) {
1393                         tx->queue_active = 0;
1394                         put_be32(htonl(1), tx->send_stop);
1395                         mb();
1396                         mmiowb();
1397                 }
1398                 __netif_tx_unlock(dev_queue);
1399         }
1400
1401         /* start the queue if we've stopped it */
1402         if (netif_tx_queue_stopped(dev_queue)
1403             && tx->req - tx->done < (tx->mask >> 1)) {
1404                 tx->wake_queue++;
1405                 netif_tx_wake_queue(dev_queue);
1406         }
1407 }
1408
1409 static inline int
1410 myri10ge_clean_rx_done(struct myri10ge_slice_state *ss, int budget)
1411 {
1412         struct myri10ge_rx_done *rx_done = &ss->rx_done;
1413         struct myri10ge_priv *mgp = ss->mgp;
1414         unsigned long rx_bytes = 0;
1415         unsigned long rx_packets = 0;
1416         unsigned long rx_ok;
1417
1418         int idx = rx_done->idx;
1419         int cnt = rx_done->cnt;
1420         int work_done = 0;
1421         u16 length;
1422         __wsum checksum;
1423
1424         while (rx_done->entry[idx].length != 0 && work_done < budget) {
1425                 length = ntohs(rx_done->entry[idx].length);
1426                 rx_done->entry[idx].length = 0;
1427                 checksum = csum_unfold(rx_done->entry[idx].checksum);
1428                 if (length <= mgp->small_bytes)
1429                         rx_ok = myri10ge_rx_done(ss, &ss->rx_small,
1430                                                  mgp->small_bytes,
1431                                                  length, checksum);
1432                 else
1433                         rx_ok = myri10ge_rx_done(ss, &ss->rx_big,
1434                                                  mgp->big_bytes,
1435                                                  length, checksum);
1436                 rx_packets += rx_ok;
1437                 rx_bytes += rx_ok * (unsigned long)length;
1438                 cnt++;
1439                 idx = cnt & (mgp->max_intr_slots - 1);
1440                 work_done++;
1441         }
1442         rx_done->idx = idx;
1443         rx_done->cnt = cnt;
1444         ss->stats.rx_packets += rx_packets;
1445         ss->stats.rx_bytes += rx_bytes;
1446
1447         if (myri10ge_lro)
1448                 lro_flush_all(&rx_done->lro_mgr);
1449
1450         /* restock receive rings if needed */
1451         if (ss->rx_small.fill_cnt - ss->rx_small.cnt < myri10ge_fill_thresh)
1452                 myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
1453                                         mgp->small_bytes + MXGEFW_PAD, 0);
1454         if (ss->rx_big.fill_cnt - ss->rx_big.cnt < myri10ge_fill_thresh)
1455                 myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
1456
1457         return work_done;
1458 }
1459
1460 static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
1461 {
1462         struct mcp_irq_data *stats = mgp->ss[0].fw_stats;
1463
1464         if (unlikely(stats->stats_updated)) {
1465                 unsigned link_up = ntohl(stats->link_up);
1466                 if (mgp->link_state != link_up) {
1467                         mgp->link_state = link_up;
1468
1469                         if (mgp->link_state == MXGEFW_LINK_UP) {
1470                                 if (netif_msg_link(mgp))
1471                                         printk(KERN_INFO
1472                                                "myri10ge: %s: link up\n",
1473                                                mgp->dev->name);
1474                                 netif_carrier_on(mgp->dev);
1475                                 mgp->link_changes++;
1476                         } else {
1477                                 if (netif_msg_link(mgp))
1478                                         printk(KERN_INFO
1479                                                "myri10ge: %s: link %s\n",
1480                                                mgp->dev->name,
1481                                                (link_up == MXGEFW_LINK_MYRINET ?
1482                                                 "mismatch (Myrinet detected)" :
1483                                                 "down"));
1484                                 netif_carrier_off(mgp->dev);
1485                                 mgp->link_changes++;
1486                         }
1487                 }
1488                 if (mgp->rdma_tags_available !=
1489                     ntohl(stats->rdma_tags_available)) {
1490                         mgp->rdma_tags_available =
1491                             ntohl(stats->rdma_tags_available);
1492                         printk(KERN_WARNING "myri10ge: %s: RDMA timed out! "
1493                                "%d tags left\n", mgp->dev->name,
1494                                mgp->rdma_tags_available);
1495                 }
1496                 mgp->down_cnt += stats->link_down;
1497                 if (stats->link_down)
1498                         wake_up(&mgp->down_wq);
1499         }
1500 }
1501
1502 static int myri10ge_poll(struct napi_struct *napi, int budget)
1503 {
1504         struct myri10ge_slice_state *ss =
1505             container_of(napi, struct myri10ge_slice_state, napi);
1506         struct net_device *netdev = ss->mgp->dev;
1507         int work_done;
1508
1509 #ifdef CONFIG_MYRI10GE_DCA
1510         if (ss->mgp->dca_enabled)
1511                 myri10ge_update_dca(ss);
1512 #endif
1513
1514         /* process as many rx events as NAPI will allow */
1515         work_done = myri10ge_clean_rx_done(ss, budget);
1516
1517         if (work_done < budget) {
1518                 netif_rx_complete(netdev, napi);
1519                 put_be32(htonl(3), ss->irq_claim);
1520         }
1521         return work_done;
1522 }
1523
1524 static irqreturn_t myri10ge_intr(int irq, void *arg)
1525 {
1526         struct myri10ge_slice_state *ss = arg;
1527         struct myri10ge_priv *mgp = ss->mgp;
1528         struct mcp_irq_data *stats = ss->fw_stats;
1529         struct myri10ge_tx_buf *tx = &ss->tx;
1530         u32 send_done_count;
1531         int i;
1532
1533         /* an interrupt on a non-zero receive-only slice is implicitly
1534          * valid  since MSI-X irqs are not shared */
1535         if ((mgp->dev->real_num_tx_queues == 1) && (ss != mgp->ss)) {
1536                 netif_rx_schedule(ss->dev, &ss->napi);
1537                 return (IRQ_HANDLED);
1538         }
1539
1540         /* make sure it is our IRQ, and that the DMA has finished */
1541         if (unlikely(!stats->valid))
1542                 return (IRQ_NONE);
1543
1544         /* low bit indicates receives are present, so schedule
1545          * napi poll handler */
1546         if (stats->valid & 1)
1547                 netif_rx_schedule(ss->dev, &ss->napi);
1548
1549         if (!mgp->msi_enabled && !mgp->msix_enabled) {
1550                 put_be32(0, mgp->irq_deassert);
1551                 if (!myri10ge_deassert_wait)
1552                         stats->valid = 0;
1553                 mb();
1554         } else
1555                 stats->valid = 0;
1556
1557         /* Wait for IRQ line to go low, if using INTx */
1558         i = 0;
1559         while (1) {
1560                 i++;
1561                 /* check for transmit completes and receives */
1562                 send_done_count = ntohl(stats->send_done_count);
1563                 if (send_done_count != tx->pkt_done)
1564                         myri10ge_tx_done(ss, (int)send_done_count);
1565                 if (unlikely(i > myri10ge_max_irq_loops)) {
1566                         printk(KERN_WARNING "myri10ge: %s: irq stuck?\n",
1567                                mgp->dev->name);
1568                         stats->valid = 0;
1569                         schedule_work(&mgp->watchdog_work);
1570                 }
1571                 if (likely(stats->valid == 0))
1572                         break;
1573                 cpu_relax();
1574                 barrier();
1575         }
1576
1577         /* Only slice 0 updates stats */
1578         if (ss == mgp->ss)
1579                 myri10ge_check_statblock(mgp);
1580
1581         put_be32(htonl(3), ss->irq_claim + 1);
1582         return (IRQ_HANDLED);
1583 }
1584
1585 static int
1586 myri10ge_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
1587 {
1588         struct myri10ge_priv *mgp = netdev_priv(netdev);
1589         char *ptr;
1590         int i;
1591
1592         cmd->autoneg = AUTONEG_DISABLE;
1593         cmd->speed = SPEED_10000;
1594         cmd->duplex = DUPLEX_FULL;
1595
1596         /*
1597          * parse the product code to deterimine the interface type
1598          * (CX4, XFP, Quad Ribbon Fiber) by looking at the character
1599          * after the 3rd dash in the driver's cached copy of the
1600          * EEPROM's product code string.
1601          */
1602         ptr = mgp->product_code_string;
1603         if (ptr == NULL) {
1604                 printk(KERN_ERR "myri10ge: %s: Missing product code\n",
1605                        netdev->name);
1606                 return 0;
1607         }
1608         for (i = 0; i < 3; i++, ptr++) {
1609                 ptr = strchr(ptr, '-');
1610                 if (ptr == NULL) {
1611                         printk(KERN_ERR "myri10ge: %s: Invalid product "
1612                                "code %s\n", netdev->name,
1613                                mgp->product_code_string);
1614                         return 0;
1615                 }
1616         }
1617         if (*ptr == 'R' || *ptr == 'Q') {
1618                 /* We've found either an XFP or quad ribbon fiber */
1619                 cmd->port = PORT_FIBRE;
1620         }
1621         return 0;
1622 }
1623
1624 static void
1625 myri10ge_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
1626 {
1627         struct myri10ge_priv *mgp = netdev_priv(netdev);
1628
1629         strlcpy(info->driver, "myri10ge", sizeof(info->driver));
1630         strlcpy(info->version, MYRI10GE_VERSION_STR, sizeof(info->version));
1631         strlcpy(info->fw_version, mgp->fw_version, sizeof(info->fw_version));
1632         strlcpy(info->bus_info, pci_name(mgp->pdev), sizeof(info->bus_info));
1633 }
1634
1635 static int
1636 myri10ge_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
1637 {
1638         struct myri10ge_priv *mgp = netdev_priv(netdev);
1639
1640         coal->rx_coalesce_usecs = mgp->intr_coal_delay;
1641         return 0;
1642 }
1643
1644 static int
1645 myri10ge_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
1646 {
1647         struct myri10ge_priv *mgp = netdev_priv(netdev);
1648
1649         mgp->intr_coal_delay = coal->rx_coalesce_usecs;
1650         put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
1651         return 0;
1652 }
1653
1654 static void
1655 myri10ge_get_pauseparam(struct net_device *netdev,
1656                         struct ethtool_pauseparam *pause)
1657 {
1658         struct myri10ge_priv *mgp = netdev_priv(netdev);
1659
1660         pause->autoneg = 0;
1661         pause->rx_pause = mgp->pause;
1662         pause->tx_pause = mgp->pause;
1663 }
1664
1665 static int
1666 myri10ge_set_pauseparam(struct net_device *netdev,
1667                         struct ethtool_pauseparam *pause)
1668 {
1669         struct myri10ge_priv *mgp = netdev_priv(netdev);
1670
1671         if (pause->tx_pause != mgp->pause)
1672                 return myri10ge_change_pause(mgp, pause->tx_pause);
1673         if (pause->rx_pause != mgp->pause)
1674                 return myri10ge_change_pause(mgp, pause->tx_pause);
1675         if (pause->autoneg != 0)
1676                 return -EINVAL;
1677         return 0;
1678 }
1679
1680 static void
1681 myri10ge_get_ringparam(struct net_device *netdev,
1682                        struct ethtool_ringparam *ring)
1683 {
1684         struct myri10ge_priv *mgp = netdev_priv(netdev);
1685
1686         ring->rx_mini_max_pending = mgp->ss[0].rx_small.mask + 1;
1687         ring->rx_max_pending = mgp->ss[0].rx_big.mask + 1;
1688         ring->rx_jumbo_max_pending = 0;
1689         ring->tx_max_pending = mgp->ss[0].rx_small.mask + 1;
1690         ring->rx_mini_pending = ring->rx_mini_max_pending;
1691         ring->rx_pending = ring->rx_max_pending;
1692         ring->rx_jumbo_pending = ring->rx_jumbo_max_pending;
1693         ring->tx_pending = ring->tx_max_pending;
1694 }
1695
1696 static u32 myri10ge_get_rx_csum(struct net_device *netdev)
1697 {
1698         struct myri10ge_priv *mgp = netdev_priv(netdev);
1699
1700         if (mgp->csum_flag)
1701                 return 1;
1702         else
1703                 return 0;
1704 }
1705
1706 static int myri10ge_set_rx_csum(struct net_device *netdev, u32 csum_enabled)
1707 {
1708         struct myri10ge_priv *mgp = netdev_priv(netdev);
1709
1710         if (csum_enabled)
1711                 mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
1712         else
1713                 mgp->csum_flag = 0;
1714         return 0;
1715 }
1716
1717 static int myri10ge_set_tso(struct net_device *netdev, u32 tso_enabled)
1718 {
1719         struct myri10ge_priv *mgp = netdev_priv(netdev);
1720         unsigned long flags = mgp->features & (NETIF_F_TSO6 | NETIF_F_TSO);
1721
1722         if (tso_enabled)
1723                 netdev->features |= flags;
1724         else
1725                 netdev->features &= ~flags;
1726         return 0;
1727 }
1728
1729 static const char myri10ge_gstrings_main_stats[][ETH_GSTRING_LEN] = {
1730         "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
1731         "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
1732         "rx_length_errors", "rx_over_errors", "rx_crc_errors",
1733         "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
1734         "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
1735         "tx_heartbeat_errors", "tx_window_errors",
1736         /* device-specific stats */
1737         "tx_boundary", "WC", "irq", "MSI", "MSIX",
1738         "read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
1739         "serial_number", "watchdog_resets",
1740 #ifdef CONFIG_MYRI10GE_DCA
1741         "dca_capable_firmware", "dca_device_present",
1742 #endif
1743         "link_changes", "link_up", "dropped_link_overflow",
1744         "dropped_link_error_or_filtered",
1745         "dropped_pause", "dropped_bad_phy", "dropped_bad_crc32",
1746         "dropped_unicast_filtered", "dropped_multicast_filtered",
1747         "dropped_runt", "dropped_overrun", "dropped_no_small_buffer",
1748         "dropped_no_big_buffer"
1749 };
1750
1751 static const char myri10ge_gstrings_slice_stats[][ETH_GSTRING_LEN] = {
1752         "----------- slice ---------",
1753         "tx_pkt_start", "tx_pkt_done", "tx_req", "tx_done",
1754         "rx_small_cnt", "rx_big_cnt",
1755         "wake_queue", "stop_queue", "tx_linearized", "LRO aggregated",
1756             "LRO flushed",
1757         "LRO avg aggr", "LRO no_desc"
1758 };
1759
1760 #define MYRI10GE_NET_STATS_LEN      21
1761 #define MYRI10GE_MAIN_STATS_LEN  ARRAY_SIZE(myri10ge_gstrings_main_stats)
1762 #define MYRI10GE_SLICE_STATS_LEN  ARRAY_SIZE(myri10ge_gstrings_slice_stats)
1763
1764 static void
1765 myri10ge_get_strings(struct net_device *netdev, u32 stringset, u8 * data)
1766 {
1767         struct myri10ge_priv *mgp = netdev_priv(netdev);
1768         int i;
1769
1770         switch (stringset) {
1771         case ETH_SS_STATS:
1772                 memcpy(data, *myri10ge_gstrings_main_stats,
1773                        sizeof(myri10ge_gstrings_main_stats));
1774                 data += sizeof(myri10ge_gstrings_main_stats);
1775                 for (i = 0; i < mgp->num_slices; i++) {
1776                         memcpy(data, *myri10ge_gstrings_slice_stats,
1777                                sizeof(myri10ge_gstrings_slice_stats));
1778                         data += sizeof(myri10ge_gstrings_slice_stats);
1779                 }
1780                 break;
1781         }
1782 }
1783
1784 static int myri10ge_get_sset_count(struct net_device *netdev, int sset)
1785 {
1786         struct myri10ge_priv *mgp = netdev_priv(netdev);
1787
1788         switch (sset) {
1789         case ETH_SS_STATS:
1790                 return MYRI10GE_MAIN_STATS_LEN +
1791                     mgp->num_slices * MYRI10GE_SLICE_STATS_LEN;
1792         default:
1793                 return -EOPNOTSUPP;
1794         }
1795 }
1796
1797 static void
1798 myri10ge_get_ethtool_stats(struct net_device *netdev,
1799                            struct ethtool_stats *stats, u64 * data)
1800 {
1801         struct myri10ge_priv *mgp = netdev_priv(netdev);
1802         struct myri10ge_slice_state *ss;
1803         int slice;
1804         int i;
1805
1806         for (i = 0; i < MYRI10GE_NET_STATS_LEN; i++)
1807                 data[i] = ((unsigned long *)&mgp->stats)[i];
1808
1809         data[i++] = (unsigned int)mgp->tx_boundary;
1810         data[i++] = (unsigned int)mgp->wc_enabled;
1811         data[i++] = (unsigned int)mgp->pdev->irq;
1812         data[i++] = (unsigned int)mgp->msi_enabled;
1813         data[i++] = (unsigned int)mgp->msix_enabled;
1814         data[i++] = (unsigned int)mgp->read_dma;
1815         data[i++] = (unsigned int)mgp->write_dma;
1816         data[i++] = (unsigned int)mgp->read_write_dma;
1817         data[i++] = (unsigned int)mgp->serial_number;
1818         data[i++] = (unsigned int)mgp->watchdog_resets;
1819 #ifdef CONFIG_MYRI10GE_DCA
1820         data[i++] = (unsigned int)(mgp->ss[0].dca_tag != NULL);
1821         data[i++] = (unsigned int)(mgp->dca_enabled);
1822 #endif
1823         data[i++] = (unsigned int)mgp->link_changes;
1824
1825         /* firmware stats are useful only in the first slice */
1826         ss = &mgp->ss[0];
1827         data[i++] = (unsigned int)ntohl(ss->fw_stats->link_up);
1828         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_link_overflow);
1829         data[i++] =
1830             (unsigned int)ntohl(ss->fw_stats->dropped_link_error_or_filtered);
1831         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_pause);
1832         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_phy);
1833         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_crc32);
1834         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_unicast_filtered);
1835         data[i++] =
1836             (unsigned int)ntohl(ss->fw_stats->dropped_multicast_filtered);
1837         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_runt);
1838         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_overrun);
1839         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_small_buffer);
1840         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_big_buffer);
1841
1842         for (slice = 0; slice < mgp->num_slices; slice++) {
1843                 ss = &mgp->ss[slice];
1844                 data[i++] = slice;
1845                 data[i++] = (unsigned int)ss->tx.pkt_start;
1846                 data[i++] = (unsigned int)ss->tx.pkt_done;
1847                 data[i++] = (unsigned int)ss->tx.req;
1848                 data[i++] = (unsigned int)ss->tx.done;
1849                 data[i++] = (unsigned int)ss->rx_small.cnt;
1850                 data[i++] = (unsigned int)ss->rx_big.cnt;
1851                 data[i++] = (unsigned int)ss->tx.wake_queue;
1852                 data[i++] = (unsigned int)ss->tx.stop_queue;
1853                 data[i++] = (unsigned int)ss->tx.linearized;
1854                 data[i++] = ss->rx_done.lro_mgr.stats.aggregated;
1855                 data[i++] = ss->rx_done.lro_mgr.stats.flushed;
1856                 if (ss->rx_done.lro_mgr.stats.flushed)
1857                         data[i++] = ss->rx_done.lro_mgr.stats.aggregated /
1858                             ss->rx_done.lro_mgr.stats.flushed;
1859                 else
1860                         data[i++] = 0;
1861                 data[i++] = ss->rx_done.lro_mgr.stats.no_desc;
1862         }
1863 }
1864
1865 static void myri10ge_set_msglevel(struct net_device *netdev, u32 value)
1866 {
1867         struct myri10ge_priv *mgp = netdev_priv(netdev);
1868         mgp->msg_enable = value;
1869 }
1870
1871 static u32 myri10ge_get_msglevel(struct net_device *netdev)
1872 {
1873         struct myri10ge_priv *mgp = netdev_priv(netdev);
1874         return mgp->msg_enable;
1875 }
1876
1877 static const struct ethtool_ops myri10ge_ethtool_ops = {
1878         .get_settings = myri10ge_get_settings,
1879         .get_drvinfo = myri10ge_get_drvinfo,
1880         .get_coalesce = myri10ge_get_coalesce,
1881         .set_coalesce = myri10ge_set_coalesce,
1882         .get_pauseparam = myri10ge_get_pauseparam,
1883         .set_pauseparam = myri10ge_set_pauseparam,
1884         .get_ringparam = myri10ge_get_ringparam,
1885         .get_rx_csum = myri10ge_get_rx_csum,
1886         .set_rx_csum = myri10ge_set_rx_csum,
1887         .set_tx_csum = ethtool_op_set_tx_hw_csum,
1888         .set_sg = ethtool_op_set_sg,
1889         .set_tso = myri10ge_set_tso,
1890         .get_link = ethtool_op_get_link,
1891         .get_strings = myri10ge_get_strings,
1892         .get_sset_count = myri10ge_get_sset_count,
1893         .get_ethtool_stats = myri10ge_get_ethtool_stats,
1894         .set_msglevel = myri10ge_set_msglevel,
1895         .get_msglevel = myri10ge_get_msglevel
1896 };
1897
1898 static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
1899 {
1900         struct myri10ge_priv *mgp = ss->mgp;
1901         struct myri10ge_cmd cmd;
1902         struct net_device *dev = mgp->dev;
1903         int tx_ring_size, rx_ring_size;
1904         int tx_ring_entries, rx_ring_entries;
1905         int i, slice, status;
1906         size_t bytes;
1907
1908         /* get ring sizes */
1909         slice = ss - mgp->ss;
1910         cmd.data0 = slice;
1911         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_RING_SIZE, &cmd, 0);
1912         tx_ring_size = cmd.data0;
1913         cmd.data0 = slice;
1914         status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
1915         if (status != 0)
1916                 return status;
1917         rx_ring_size = cmd.data0;
1918
1919         tx_ring_entries = tx_ring_size / sizeof(struct mcp_kreq_ether_send);
1920         rx_ring_entries = rx_ring_size / sizeof(struct mcp_dma_addr);
1921         ss->tx.mask = tx_ring_entries - 1;
1922         ss->rx_small.mask = ss->rx_big.mask = rx_ring_entries - 1;
1923
1924         status = -ENOMEM;
1925
1926         /* allocate the host shadow rings */
1927
1928         bytes = 8 + (MYRI10GE_MAX_SEND_DESC_TSO + 4)
1929             * sizeof(*ss->tx.req_list);
1930         ss->tx.req_bytes = kzalloc(bytes, GFP_KERNEL);
1931         if (ss->tx.req_bytes == NULL)
1932                 goto abort_with_nothing;
1933
1934         /* ensure req_list entries are aligned to 8 bytes */
1935         ss->tx.req_list = (struct mcp_kreq_ether_send *)
1936             ALIGN((unsigned long)ss->tx.req_bytes, 8);
1937         ss->tx.queue_active = 0;
1938
1939         bytes = rx_ring_entries * sizeof(*ss->rx_small.shadow);
1940         ss->rx_small.shadow = kzalloc(bytes, GFP_KERNEL);
1941         if (ss->rx_small.shadow == NULL)
1942                 goto abort_with_tx_req_bytes;
1943
1944         bytes = rx_ring_entries * sizeof(*ss->rx_big.shadow);
1945         ss->rx_big.shadow = kzalloc(bytes, GFP_KERNEL);
1946         if (ss->rx_big.shadow == NULL)
1947                 goto abort_with_rx_small_shadow;
1948
1949         /* allocate the host info rings */
1950
1951         bytes = tx_ring_entries * sizeof(*ss->tx.info);
1952         ss->tx.info = kzalloc(bytes, GFP_KERNEL);
1953         if (ss->tx.info == NULL)
1954                 goto abort_with_rx_big_shadow;
1955
1956         bytes = rx_ring_entries * sizeof(*ss->rx_small.info);
1957         ss->rx_small.info = kzalloc(bytes, GFP_KERNEL);
1958         if (ss->rx_small.info == NULL)
1959                 goto abort_with_tx_info;
1960
1961         bytes = rx_ring_entries * sizeof(*ss->rx_big.info);
1962         ss->rx_big.info = kzalloc(bytes, GFP_KERNEL);
1963         if (ss->rx_big.info == NULL)
1964                 goto abort_with_rx_small_info;
1965
1966         /* Fill the receive rings */
1967         ss->rx_big.cnt = 0;
1968         ss->rx_small.cnt = 0;
1969         ss->rx_big.fill_cnt = 0;
1970         ss->rx_small.fill_cnt = 0;
1971         ss->rx_small.page_offset = MYRI10GE_ALLOC_SIZE;
1972         ss->rx_big.page_offset = MYRI10GE_ALLOC_SIZE;
1973         ss->rx_small.watchdog_needed = 0;
1974         ss->rx_big.watchdog_needed = 0;
1975         myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
1976                                 mgp->small_bytes + MXGEFW_PAD, 0);
1977
1978         if (ss->rx_small.fill_cnt < ss->rx_small.mask + 1) {
1979                 printk(KERN_ERR
1980                        "myri10ge: %s:slice-%d: alloced only %d small bufs\n",
1981                        dev->name, slice, ss->rx_small.fill_cnt);
1982                 goto abort_with_rx_small_ring;
1983         }
1984
1985         myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
1986         if (ss->rx_big.fill_cnt < ss->rx_big.mask + 1) {
1987                 printk(KERN_ERR
1988                        "myri10ge: %s:slice-%d: alloced only %d big bufs\n",
1989                        dev->name, slice, ss->rx_big.fill_cnt);
1990                 goto abort_with_rx_big_ring;
1991         }
1992
1993         return 0;
1994
1995 abort_with_rx_big_ring:
1996         for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
1997                 int idx = i & ss->rx_big.mask;
1998                 myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
1999                                        mgp->big_bytes);
2000                 put_page(ss->rx_big.info[idx].page);
2001         }
2002
2003 abort_with_rx_small_ring:
2004         for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
2005                 int idx = i & ss->rx_small.mask;
2006                 myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
2007                                        mgp->small_bytes + MXGEFW_PAD);
2008                 put_page(ss->rx_small.info[idx].page);
2009         }
2010
2011         kfree(ss->rx_big.info);
2012
2013 abort_with_rx_small_info:
2014         kfree(ss->rx_small.info);
2015
2016 abort_with_tx_info:
2017         kfree(ss->tx.info);
2018
2019 abort_with_rx_big_shadow:
2020         kfree(ss->rx_big.shadow);
2021
2022 abort_with_rx_small_shadow:
2023         kfree(ss->rx_small.shadow);
2024
2025 abort_with_tx_req_bytes:
2026         kfree(ss->tx.req_bytes);
2027         ss->tx.req_bytes = NULL;
2028         ss->tx.req_list = NULL;
2029
2030 abort_with_nothing:
2031         return status;
2032 }
2033
2034 static void myri10ge_free_rings(struct myri10ge_slice_state *ss)
2035 {
2036         struct myri10ge_priv *mgp = ss->mgp;
2037         struct sk_buff *skb;
2038         struct myri10ge_tx_buf *tx;
2039         int i, len, idx;
2040
2041         /* If not allocated, skip it */
2042         if (ss->tx.req_list == NULL)
2043                 return;
2044
2045         for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
2046                 idx = i & ss->rx_big.mask;
2047                 if (i == ss->rx_big.fill_cnt - 1)
2048                         ss->rx_big.info[idx].page_offset = MYRI10GE_ALLOC_SIZE;
2049                 myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
2050                                        mgp->big_bytes);
2051                 put_page(ss->rx_big.info[idx].page);
2052         }
2053
2054         for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
2055                 idx = i & ss->rx_small.mask;
2056                 if (i == ss->rx_small.fill_cnt - 1)
2057                         ss->rx_small.info[idx].page_offset =
2058                             MYRI10GE_ALLOC_SIZE;
2059                 myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
2060                                        mgp->small_bytes + MXGEFW_PAD);
2061                 put_page(ss->rx_small.info[idx].page);
2062         }
2063         tx = &ss->tx;
2064         while (tx->done != tx->req) {
2065                 idx = tx->done & tx->mask;
2066                 skb = tx->info[idx].skb;
2067
2068                 /* Mark as free */
2069                 tx->info[idx].skb = NULL;
2070                 tx->done++;
2071                 len = pci_unmap_len(&tx->info[idx], len);
2072                 pci_unmap_len_set(&tx->info[idx], len, 0);
2073                 if (skb) {
2074                         ss->stats.tx_dropped++;
2075                         dev_kfree_skb_any(skb);
2076                         if (len)
2077                                 pci_unmap_single(mgp->pdev,
2078                                                  pci_unmap_addr(&tx->info[idx],
2079                                                                 bus), len,
2080                                                  PCI_DMA_TODEVICE);
2081                 } else {
2082                         if (len)
2083                                 pci_unmap_page(mgp->pdev,
2084                                                pci_unmap_addr(&tx->info[idx],
2085                                                               bus), len,
2086                                                PCI_DMA_TODEVICE);
2087                 }
2088         }
2089         kfree(ss->rx_big.info);
2090
2091         kfree(ss->rx_small.info);
2092
2093         kfree(ss->tx.info);
2094
2095         kfree(ss->rx_big.shadow);
2096
2097         kfree(ss->rx_small.shadow);
2098
2099         kfree(ss->tx.req_bytes);
2100         ss->tx.req_bytes = NULL;
2101         ss->tx.req_list = NULL;
2102 }
2103
2104 static int myri10ge_request_irq(struct myri10ge_priv *mgp)
2105 {
2106         struct pci_dev *pdev = mgp->pdev;
2107         struct myri10ge_slice_state *ss;
2108         struct net_device *netdev = mgp->dev;
2109         int i;
2110         int status;
2111
2112         mgp->msi_enabled = 0;
2113         mgp->msix_enabled = 0;
2114         status = 0;
2115         if (myri10ge_msi) {
2116                 if (mgp->num_slices > 1) {
2117                         status =
2118                             pci_enable_msix(pdev, mgp->msix_vectors,
2119                                             mgp->num_slices);
2120                         if (status == 0) {
2121                                 mgp->msix_enabled = 1;
2122                         } else {
2123                                 dev_err(&pdev->dev,
2124                                         "Error %d setting up MSI-X\n", status);
2125                                 return status;
2126                         }
2127                 }
2128                 if (mgp->msix_enabled == 0) {
2129                         status = pci_enable_msi(pdev);
2130                         if (status != 0) {
2131                                 dev_err(&pdev->dev,
2132                                         "Error %d setting up MSI; falling back to xPIC\n",
2133                                         status);
2134                         } else {
2135                                 mgp->msi_enabled = 1;
2136                         }
2137                 }
2138         }
2139         if (mgp->msix_enabled) {
2140                 for (i = 0; i < mgp->num_slices; i++) {
2141                         ss = &mgp->ss[i];
2142                         snprintf(ss->irq_desc, sizeof(ss->irq_desc),
2143                                  "%s:slice-%d", netdev->name, i);
2144                         status = request_irq(mgp->msix_vectors[i].vector,
2145                                              myri10ge_intr, 0, ss->irq_desc,
2146                                              ss);
2147                         if (status != 0) {
2148                                 dev_err(&pdev->dev,
2149                                         "slice %d failed to allocate IRQ\n", i);
2150                                 i--;
2151                                 while (i >= 0) {
2152                                         free_irq(mgp->msix_vectors[i].vector,
2153                                                  &mgp->ss[i]);
2154                                         i--;
2155                                 }
2156                                 pci_disable_msix(pdev);
2157                                 return status;
2158                         }
2159                 }
2160         } else {
2161                 status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
2162                                      mgp->dev->name, &mgp->ss[0]);
2163                 if (status != 0) {
2164                         dev_err(&pdev->dev, "failed to allocate IRQ\n");
2165                         if (mgp->msi_enabled)
2166                                 pci_disable_msi(pdev);
2167                 }
2168         }
2169         return status;
2170 }
2171
2172 static void myri10ge_free_irq(struct myri10ge_priv *mgp)
2173 {
2174         struct pci_dev *pdev = mgp->pdev;
2175         int i;
2176
2177         if (mgp->msix_enabled) {
2178                 for (i = 0; i < mgp->num_slices; i++)
2179                         free_irq(mgp->msix_vectors[i].vector, &mgp->ss[i]);
2180         } else {
2181                 free_irq(pdev->irq, &mgp->ss[0]);
2182         }
2183         if (mgp->msi_enabled)
2184                 pci_disable_msi(pdev);
2185         if (mgp->msix_enabled)
2186                 pci_disable_msix(pdev);
2187 }
2188
2189 static int
2190 myri10ge_get_frag_header(struct skb_frag_struct *frag, void **mac_hdr,
2191                          void **ip_hdr, void **tcpudp_hdr,
2192                          u64 * hdr_flags, void *priv)
2193 {
2194         struct ethhdr *eh;
2195         struct vlan_ethhdr *veh;
2196         struct iphdr *iph;
2197         u8 *va = page_address(frag->page) + frag->page_offset;
2198         unsigned long ll_hlen;
2199         /* passed opaque through lro_receive_frags() */
2200         __wsum csum = (__force __wsum) (unsigned long)priv;
2201
2202         /* find the mac header, aborting if not IPv4 */
2203
2204         eh = (struct ethhdr *)va;
2205         *mac_hdr = eh;
2206         ll_hlen = ETH_HLEN;
2207         if (eh->h_proto != htons(ETH_P_IP)) {
2208                 if (eh->h_proto == htons(ETH_P_8021Q)) {
2209                         veh = (struct vlan_ethhdr *)va;
2210                         if (veh->h_vlan_encapsulated_proto != htons(ETH_P_IP))
2211                                 return -1;
2212
2213                         ll_hlen += VLAN_HLEN;
2214
2215                         /*
2216                          *  HW checksum starts ETH_HLEN bytes into
2217                          *  frame, so we must subtract off the VLAN
2218                          *  header's checksum before csum can be used
2219                          */
2220                         csum = csum_sub(csum, csum_partial(va + ETH_HLEN,
2221                                                            VLAN_HLEN, 0));
2222                 } else {
2223                         return -1;
2224                 }
2225         }
2226         *hdr_flags = LRO_IPV4;
2227
2228         iph = (struct iphdr *)(va + ll_hlen);
2229         *ip_hdr = iph;
2230         if (iph->protocol != IPPROTO_TCP)
2231                 return -1;
2232         *hdr_flags |= LRO_TCP;
2233         *tcpudp_hdr = (u8 *) (*ip_hdr) + (iph->ihl << 2);
2234
2235         /* verify the IP checksum */
2236         if (unlikely(ip_fast_csum((u8 *) iph, iph->ihl)))
2237                 return -1;
2238
2239         /* verify the  checksum */
2240         if (unlikely(csum_tcpudp_magic(iph->saddr, iph->daddr,
2241                                        ntohs(iph->tot_len) - (iph->ihl << 2),
2242                                        IPPROTO_TCP, csum)))
2243                 return -1;
2244
2245         return 0;
2246 }
2247
2248 static int myri10ge_get_txrx(struct myri10ge_priv *mgp, int slice)
2249 {
2250         struct myri10ge_cmd cmd;
2251         struct myri10ge_slice_state *ss;
2252         int status;
2253
2254         ss = &mgp->ss[slice];
2255         status = 0;
2256         if (slice == 0 || (mgp->dev->real_num_tx_queues > 1)) {
2257                 cmd.data0 = slice;
2258                 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_OFFSET,
2259                                            &cmd, 0);
2260                 ss->tx.lanai = (struct mcp_kreq_ether_send __iomem *)
2261                     (mgp->sram + cmd.data0);
2262         }
2263         cmd.data0 = slice;
2264         status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SMALL_RX_OFFSET,
2265                                     &cmd, 0);
2266         ss->rx_small.lanai = (struct mcp_kreq_ether_recv __iomem *)
2267             (mgp->sram + cmd.data0);
2268
2269         cmd.data0 = slice;
2270         status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_BIG_RX_OFFSET, &cmd, 0);
2271         ss->rx_big.lanai = (struct mcp_kreq_ether_recv __iomem *)
2272             (mgp->sram + cmd.data0);
2273
2274         ss->tx.send_go = (__iomem __be32 *)
2275             (mgp->sram + MXGEFW_ETH_SEND_GO + 64 * slice);
2276         ss->tx.send_stop = (__iomem __be32 *)
2277             (mgp->sram + MXGEFW_ETH_SEND_STOP + 64 * slice);
2278         return status;
2279
2280 }
2281
2282 static int myri10ge_set_stats(struct myri10ge_priv *mgp, int slice)
2283 {
2284         struct myri10ge_cmd cmd;
2285         struct myri10ge_slice_state *ss;
2286         int status;
2287
2288         ss = &mgp->ss[slice];
2289         cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->fw_stats_bus);
2290         cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->fw_stats_bus);
2291         cmd.data2 = sizeof(struct mcp_irq_data) | (slice << 16);
2292         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_STATS_DMA_V2, &cmd, 0);
2293         if (status == -ENOSYS) {
2294                 dma_addr_t bus = ss->fw_stats_bus;
2295                 if (slice != 0)
2296                         return -EINVAL;
2297                 bus += offsetof(struct mcp_irq_data, send_done_count);
2298                 cmd.data0 = MYRI10GE_LOWPART_TO_U32(bus);
2299                 cmd.data1 = MYRI10GE_HIGHPART_TO_U32(bus);
2300                 status = myri10ge_send_cmd(mgp,
2301                                            MXGEFW_CMD_SET_STATS_DMA_OBSOLETE,
2302                                            &cmd, 0);
2303                 /* Firmware cannot support multicast without STATS_DMA_V2 */
2304                 mgp->fw_multicast_support = 0;
2305         } else {
2306                 mgp->fw_multicast_support = 1;
2307         }
2308         return 0;
2309 }
2310
2311 static int myri10ge_open(struct net_device *dev)
2312 {
2313         struct myri10ge_slice_state *ss;
2314         struct myri10ge_priv *mgp = netdev_priv(dev);
2315         struct myri10ge_cmd cmd;
2316         int i, status, big_pow2, slice;
2317         u8 *itable;
2318         struct net_lro_mgr *lro_mgr;
2319
2320         if (mgp->running != MYRI10GE_ETH_STOPPED)
2321                 return -EBUSY;
2322
2323         mgp->running = MYRI10GE_ETH_STARTING;
2324         status = myri10ge_reset(mgp);
2325         if (status != 0) {
2326                 printk(KERN_ERR "myri10ge: %s: failed reset\n", dev->name);
2327                 goto abort_with_nothing;
2328         }
2329
2330         if (mgp->num_slices > 1) {
2331                 cmd.data0 = mgp->num_slices;
2332                 cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
2333                 if (mgp->dev->real_num_tx_queues > 1)
2334                         cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
2335                 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
2336                                            &cmd, 0);
2337                 if (status != 0) {
2338                         printk(KERN_ERR
2339                                "myri10ge: %s: failed to set number of slices\n",
2340                                dev->name);
2341                         goto abort_with_nothing;
2342                 }
2343                 /* setup the indirection table */
2344                 cmd.data0 = mgp->num_slices;
2345                 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_TABLE_SIZE,
2346                                            &cmd, 0);
2347
2348                 status |= myri10ge_send_cmd(mgp,
2349                                             MXGEFW_CMD_GET_RSS_TABLE_OFFSET,
2350                                             &cmd, 0);
2351                 if (status != 0) {
2352                         printk(KERN_ERR
2353                                "myri10ge: %s: failed to setup rss tables\n",
2354                                dev->name);
2355                         goto abort_with_nothing;
2356                 }
2357
2358                 /* just enable an identity mapping */
2359                 itable = mgp->sram + cmd.data0;
2360                 for (i = 0; i < mgp->num_slices; i++)
2361                         __raw_writeb(i, &itable[i]);
2362
2363                 cmd.data0 = 1;
2364                 cmd.data1 = myri10ge_rss_hash;
2365                 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_ENABLE,
2366                                            &cmd, 0);
2367                 if (status != 0) {
2368                         printk(KERN_ERR
2369                                "myri10ge: %s: failed to enable slices\n",
2370                                dev->name);
2371                         goto abort_with_nothing;
2372                 }
2373         }
2374
2375         status = myri10ge_request_irq(mgp);
2376         if (status != 0)
2377                 goto abort_with_nothing;
2378
2379         /* decide what small buffer size to use.  For good TCP rx
2380          * performance, it is important to not receive 1514 byte
2381          * frames into jumbo buffers, as it confuses the socket buffer
2382          * accounting code, leading to drops and erratic performance.
2383          */
2384
2385         if (dev->mtu <= ETH_DATA_LEN)
2386                 /* enough for a TCP header */
2387                 mgp->small_bytes = (128 > SMP_CACHE_BYTES)
2388                     ? (128 - MXGEFW_PAD)
2389                     : (SMP_CACHE_BYTES - MXGEFW_PAD);
2390         else
2391                 /* enough for a vlan encapsulated ETH_DATA_LEN frame */
2392                 mgp->small_bytes = VLAN_ETH_FRAME_LEN;
2393
2394         /* Override the small buffer size? */
2395         if (myri10ge_small_bytes > 0)
2396                 mgp->small_bytes = myri10ge_small_bytes;
2397
2398         /* Firmware needs the big buff size as a power of 2.  Lie and
2399          * tell him the buffer is larger, because we only use 1
2400          * buffer/pkt, and the mtu will prevent overruns.
2401          */
2402         big_pow2 = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
2403         if (big_pow2 < MYRI10GE_ALLOC_SIZE / 2) {
2404                 while (!is_power_of_2(big_pow2))
2405                         big_pow2++;
2406                 mgp->big_bytes = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
2407         } else {
2408                 big_pow2 = MYRI10GE_ALLOC_SIZE;
2409                 mgp->big_bytes = big_pow2;
2410         }
2411
2412         /* setup the per-slice data structures */
2413         for (slice = 0; slice < mgp->num_slices; slice++) {
2414                 ss = &mgp->ss[slice];
2415
2416                 status = myri10ge_get_txrx(mgp, slice);
2417                 if (status != 0) {
2418                         printk(KERN_ERR
2419                                "myri10ge: %s: failed to get ring sizes or locations\n",
2420                                dev->name);
2421                         goto abort_with_rings;
2422                 }
2423                 status = myri10ge_allocate_rings(ss);
2424                 if (status != 0)
2425                         goto abort_with_rings;
2426
2427                 /* only firmware which supports multiple TX queues
2428                  * supports setting up the tx stats on non-zero
2429                  * slices */
2430                 if (slice == 0 || mgp->dev->real_num_tx_queues > 1)
2431                         status = myri10ge_set_stats(mgp, slice);
2432                 if (status) {
2433                         printk(KERN_ERR
2434                                "myri10ge: %s: Couldn't set stats DMA\n",
2435                                dev->name);
2436                         goto abort_with_rings;
2437                 }
2438
2439                 lro_mgr = &ss->rx_done.lro_mgr;
2440                 lro_mgr->dev = dev;
2441                 lro_mgr->features = LRO_F_NAPI;
2442                 lro_mgr->ip_summed = CHECKSUM_COMPLETE;
2443                 lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
2444                 lro_mgr->max_desc = MYRI10GE_MAX_LRO_DESCRIPTORS;
2445                 lro_mgr->lro_arr = ss->rx_done.lro_desc;
2446                 lro_mgr->get_frag_header = myri10ge_get_frag_header;
2447                 lro_mgr->max_aggr = myri10ge_lro_max_pkts;
2448                 if (lro_mgr->max_aggr > MAX_SKB_FRAGS)
2449                         lro_mgr->max_aggr = MAX_SKB_FRAGS;
2450
2451                 /* must happen prior to any irq */
2452                 napi_enable(&(ss)->napi);
2453         }
2454
2455         /* now give firmware buffers sizes, and MTU */
2456         cmd.data0 = dev->mtu + ETH_HLEN + VLAN_HLEN;
2457         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_MTU, &cmd, 0);
2458         cmd.data0 = mgp->small_bytes;
2459         status |=
2460             myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, &cmd, 0);
2461         cmd.data0 = big_pow2;
2462         status |=
2463             myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_BIG_BUFFER_SIZE, &cmd, 0);
2464         if (status) {
2465                 printk(KERN_ERR "myri10ge: %s: Couldn't set buffer sizes\n",
2466                        dev->name);
2467                 goto abort_with_rings;
2468         }
2469
2470         /*
2471          * Set Linux style TSO mode; this is needed only on newer
2472          *  firmware versions.  Older versions default to Linux
2473          *  style TSO
2474          */
2475         cmd.data0 = 0;
2476         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_TSO_MODE, &cmd, 0);
2477         if (status && status != -ENOSYS) {
2478                 printk(KERN_ERR "myri10ge: %s: Couldn't set TSO mode\n",
2479                        dev->name);
2480                 goto abort_with_rings;
2481         }
2482
2483         mgp->link_state = ~0U;
2484         mgp->rdma_tags_available = 15;
2485
2486         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_UP, &cmd, 0);
2487         if (status) {
2488                 printk(KERN_ERR "myri10ge: %s: Couldn't bring up link\n",
2489                        dev->name);
2490                 goto abort_with_rings;
2491         }
2492
2493         mgp->running = MYRI10GE_ETH_RUNNING;
2494         mgp->watchdog_timer.expires = jiffies + myri10ge_watchdog_timeout * HZ;
2495         add_timer(&mgp->watchdog_timer);
2496         netif_tx_wake_all_queues(dev);
2497
2498         return 0;
2499
2500 abort_with_rings:
2501         while (slice) {
2502                 slice--;
2503                 napi_disable(&mgp->ss[slice].napi);
2504         }
2505         for (i = 0; i < mgp->num_slices; i++)
2506                 myri10ge_free_rings(&mgp->ss[i]);
2507
2508         myri10ge_free_irq(mgp);
2509
2510 abort_with_nothing:
2511         mgp->running = MYRI10GE_ETH_STOPPED;
2512         return -ENOMEM;
2513 }
2514
2515 static int myri10ge_close(struct net_device *dev)
2516 {
2517         struct myri10ge_priv *mgp = netdev_priv(dev);
2518         struct myri10ge_cmd cmd;
2519         int status, old_down_cnt;
2520         int i;
2521
2522         if (mgp->running != MYRI10GE_ETH_RUNNING)
2523                 return 0;
2524
2525         if (mgp->ss[0].tx.req_bytes == NULL)
2526                 return 0;
2527
2528         del_timer_sync(&mgp->watchdog_timer);
2529         mgp->running = MYRI10GE_ETH_STOPPING;
2530         for (i = 0; i < mgp->num_slices; i++) {
2531                 napi_disable(&mgp->ss[i].napi);
2532         }
2533         netif_carrier_off(dev);
2534
2535         netif_tx_stop_all_queues(dev);
2536         old_down_cnt = mgp->down_cnt;
2537         mb();
2538         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_DOWN, &cmd, 0);
2539         if (status)
2540                 printk(KERN_ERR "myri10ge: %s: Couldn't bring down link\n",
2541                        dev->name);
2542
2543         wait_event_timeout(mgp->down_wq, old_down_cnt != mgp->down_cnt, HZ);
2544         if (old_down_cnt == mgp->down_cnt)
2545                 printk(KERN_ERR "myri10ge: %s never got down irq\n", dev->name);
2546
2547         netif_tx_disable(dev);
2548         myri10ge_free_irq(mgp);
2549         for (i = 0; i < mgp->num_slices; i++)
2550                 myri10ge_free_rings(&mgp->ss[i]);
2551
2552         mgp->running = MYRI10GE_ETH_STOPPED;
2553         return 0;
2554 }
2555
2556 /* copy an array of struct mcp_kreq_ether_send's to the mcp.  Copy
2557  * backwards one at a time and handle ring wraps */
2558
2559 static inline void
2560 myri10ge_submit_req_backwards(struct myri10ge_tx_buf *tx,
2561                               struct mcp_kreq_ether_send *src, int cnt)
2562 {
2563         int idx, starting_slot;
2564         starting_slot = tx->req;
2565         while (cnt > 1) {
2566                 cnt--;
2567                 idx = (starting_slot + cnt) & tx->mask;
2568                 myri10ge_pio_copy(&tx->lanai[idx], &src[cnt], sizeof(*src));
2569                 mb();
2570         }
2571 }
2572
2573 /*
2574  * copy an array of struct mcp_kreq_ether_send's to the mcp.  Copy
2575  * at most 32 bytes at a time, so as to avoid involving the software
2576  * pio handler in the nic.   We re-write the first segment's flags
2577  * to mark them valid only after writing the entire chain.
2578  */
2579
2580 static inline void
2581 myri10ge_submit_req(struct myri10ge_tx_buf *tx, struct mcp_kreq_ether_send *src,
2582                     int cnt)
2583 {
2584         int idx, i;
2585         struct mcp_kreq_ether_send __iomem *dstp, *dst;
2586         struct mcp_kreq_ether_send *srcp;
2587         u8 last_flags;
2588
2589         idx = tx->req & tx->mask;
2590
2591         last_flags = src->flags;
2592         src->flags = 0;
2593         mb();
2594         dst = dstp = &tx->lanai[idx];
2595         srcp = src;
2596
2597         if ((idx + cnt) < tx->mask) {
2598                 for (i = 0; i < (cnt - 1); i += 2) {
2599                         myri10ge_pio_copy(dstp, srcp, 2 * sizeof(*src));
2600                         mb();   /* force write every 32 bytes */
2601                         srcp += 2;
2602                         dstp += 2;
2603                 }
2604         } else {
2605                 /* submit all but the first request, and ensure
2606                  * that it is submitted below */
2607                 myri10ge_submit_req_backwards(tx, src, cnt);
2608                 i = 0;
2609         }
2610         if (i < cnt) {
2611                 /* submit the first request */
2612                 myri10ge_pio_copy(dstp, srcp, sizeof(*src));
2613                 mb();           /* barrier before setting valid flag */
2614         }
2615
2616         /* re-write the last 32-bits with the valid flags */
2617         src->flags = last_flags;
2618         put_be32(*((__be32 *) src + 3), (__be32 __iomem *) dst + 3);
2619         tx->req += cnt;
2620         mb();
2621 }
2622
2623 /*
2624  * Transmit a packet.  We need to split the packet so that a single
2625  * segment does not cross myri10ge->tx_boundary, so this makes segment
2626  * counting tricky.  So rather than try to count segments up front, we
2627  * just give up if there are too few segments to hold a reasonably
2628  * fragmented packet currently available.  If we run
2629  * out of segments while preparing a packet for DMA, we just linearize
2630  * it and try again.
2631  */
2632
2633 static int myri10ge_xmit(struct sk_buff *skb, struct net_device *dev)
2634 {
2635         struct myri10ge_priv *mgp = netdev_priv(dev);
2636         struct myri10ge_slice_state *ss;
2637         struct mcp_kreq_ether_send *req;
2638         struct myri10ge_tx_buf *tx;
2639         struct skb_frag_struct *frag;
2640         struct netdev_queue *netdev_queue;
2641         dma_addr_t bus;
2642         u32 low;
2643         __be32 high_swapped;
2644         unsigned int len;
2645         int idx, last_idx, avail, frag_cnt, frag_idx, count, mss, max_segments;
2646         u16 pseudo_hdr_offset, cksum_offset, queue;
2647         int cum_len, seglen, boundary, rdma_count;
2648         u8 flags, odd_flag;
2649
2650         queue = skb_get_queue_mapping(skb);
2651         ss = &mgp->ss[queue];
2652         netdev_queue = netdev_get_tx_queue(mgp->dev, queue);
2653         tx = &ss->tx;
2654
2655 again:
2656         req = tx->req_list;
2657         avail = tx->mask - 1 - (tx->req - tx->done);
2658
2659         mss = 0;
2660         max_segments = MXGEFW_MAX_SEND_DESC;
2661
2662         if (skb_is_gso(skb)) {
2663                 mss = skb_shinfo(skb)->gso_size;
2664                 max_segments = MYRI10GE_MAX_SEND_DESC_TSO;
2665         }
2666
2667         if ((unlikely(avail < max_segments))) {
2668                 /* we are out of transmit resources */
2669                 tx->stop_queue++;
2670                 netif_tx_stop_queue(netdev_queue);
2671                 return 1;
2672         }
2673
2674         /* Setup checksum offloading, if needed */
2675         cksum_offset = 0;
2676         pseudo_hdr_offset = 0;
2677         odd_flag = 0;
2678         flags = (MXGEFW_FLAGS_NO_TSO | MXGEFW_FLAGS_FIRST);
2679         if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
2680                 cksum_offset = skb_transport_offset(skb);
2681                 pseudo_hdr_offset = cksum_offset + skb->csum_offset;
2682                 /* If the headers are excessively large, then we must
2683                  * fall back to a software checksum */
2684                 if (unlikely(!mss && (cksum_offset > 255 ||
2685                                       pseudo_hdr_offset > 127))) {
2686                         if (skb_checksum_help(skb))
2687                                 goto drop;
2688                         cksum_offset = 0;
2689                         pseudo_hdr_offset = 0;
2690                 } else {
2691                         odd_flag = MXGEFW_FLAGS_ALIGN_ODD;
2692                         flags |= MXGEFW_FLAGS_CKSUM;
2693                 }
2694         }
2695
2696         cum_len = 0;
2697
2698         if (mss) {              /* TSO */
2699                 /* this removes any CKSUM flag from before */
2700                 flags = (MXGEFW_FLAGS_TSO_HDR | MXGEFW_FLAGS_FIRST);
2701
2702                 /* negative cum_len signifies to the
2703                  * send loop that we are still in the
2704                  * header portion of the TSO packet.
2705                  * TSO header can be at most 1KB long */
2706                 cum_len = -(skb_transport_offset(skb) + tcp_hdrlen(skb));
2707
2708                 /* for IPv6 TSO, the checksum offset stores the
2709                  * TCP header length, to save the firmware from
2710                  * the need to parse the headers */
2711                 if (skb_is_gso_v6(skb)) {
2712                         cksum_offset = tcp_hdrlen(skb);
2713                         /* Can only handle headers <= max_tso6 long */
2714                         if (unlikely(-cum_len > mgp->max_tso6))
2715                                 return myri10ge_sw_tso(skb, dev);
2716                 }
2717                 /* for TSO, pseudo_hdr_offset holds mss.
2718                  * The firmware figures out where to put
2719                  * the checksum by parsing the header. */
2720                 pseudo_hdr_offset = mss;
2721         } else
2722                 /* Mark small packets, and pad out tiny packets */
2723         if (skb->len <= MXGEFW_SEND_SMALL_SIZE) {
2724                 flags |= MXGEFW_FLAGS_SMALL;
2725
2726                 /* pad frames to at least ETH_ZLEN bytes */
2727                 if (unlikely(skb->len < ETH_ZLEN)) {
2728                         if (skb_padto(skb, ETH_ZLEN)) {
2729                                 /* The packet is gone, so we must
2730                                  * return 0 */
2731                                 ss->stats.tx_dropped += 1;
2732                                 return 0;
2733                         }
2734                         /* adjust the len to account for the zero pad
2735                          * so that the nic can know how long it is */
2736                         skb->len = ETH_ZLEN;
2737                 }
2738         }
2739
2740         /* map the skb for DMA */
2741         len = skb->len - skb->data_len;
2742         idx = tx->req & tx->mask;
2743         tx->info[idx].skb = skb;
2744         bus = pci_map_single(mgp->pdev, skb->data, len, PCI_DMA_TODEVICE);
2745         pci_unmap_addr_set(&tx->info[idx], bus, bus);
2746         pci_unmap_len_set(&tx->info[idx], len, len);
2747
2748         frag_cnt = skb_shinfo(skb)->nr_frags;
2749         frag_idx = 0;
2750         count = 0;
2751         rdma_count = 0;
2752
2753         /* "rdma_count" is the number of RDMAs belonging to the
2754          * current packet BEFORE the current send request. For
2755          * non-TSO packets, this is equal to "count".
2756          * For TSO packets, rdma_count needs to be reset
2757          * to 0 after a segment cut.
2758          *
2759          * The rdma_count field of the send request is
2760          * the number of RDMAs of the packet starting at
2761          * that request. For TSO send requests with one ore more cuts
2762          * in the middle, this is the number of RDMAs starting
2763          * after the last cut in the request. All previous
2764          * segments before the last cut implicitly have 1 RDMA.
2765          *
2766          * Since the number of RDMAs is not known beforehand,
2767          * it must be filled-in retroactively - after each
2768          * segmentation cut or at the end of the entire packet.
2769          */
2770
2771         while (1) {
2772                 /* Break the SKB or Fragment up into pieces which
2773                  * do not cross mgp->tx_boundary */
2774                 low = MYRI10GE_LOWPART_TO_U32(bus);
2775                 high_swapped = htonl(MYRI10GE_HIGHPART_TO_U32(bus));
2776                 while (len) {
2777                         u8 flags_next;
2778                         int cum_len_next;
2779
2780                         if (unlikely(count == max_segments))
2781                                 goto abort_linearize;
2782
2783                         boundary =
2784                             (low + mgp->tx_boundary) & ~(mgp->tx_boundary - 1);
2785                         seglen = boundary - low;
2786                         if (seglen > len)
2787                                 seglen = len;
2788                         flags_next = flags & ~MXGEFW_FLAGS_FIRST;
2789                         cum_len_next = cum_len + seglen;
2790                         if (mss) {      /* TSO */
2791                                 (req - rdma_count)->rdma_count = rdma_count + 1;
2792
2793                                 if (likely(cum_len >= 0)) {     /* payload */
2794                                         int next_is_first, chop;
2795
2796                                         chop = (cum_len_next > mss);
2797                                         cum_len_next = cum_len_next % mss;
2798                                         next_is_first = (cum_len_next == 0);
2799                                         flags |= chop * MXGEFW_FLAGS_TSO_CHOP;
2800                                         flags_next |= next_is_first *
2801                                             MXGEFW_FLAGS_FIRST;
2802                                         rdma_count |= -(chop | next_is_first);
2803                                         rdma_count += chop & !next_is_first;
2804                                 } else if (likely(cum_len_next >= 0)) { /* header ends */
2805                                         int small;
2806
2807                                         rdma_count = -1;
2808                                         cum_len_next = 0;
2809                                         seglen = -cum_len;
2810                                         small = (mss <= MXGEFW_SEND_SMALL_SIZE);
2811                                         flags_next = MXGEFW_FLAGS_TSO_PLD |
2812                                             MXGEFW_FLAGS_FIRST |
2813                                             (small * MXGEFW_FLAGS_SMALL);
2814                                 }
2815                         }
2816                         req->addr_high = high_swapped;
2817                         req->addr_low = htonl(low);
2818                         req->pseudo_hdr_offset = htons(pseudo_hdr_offset);
2819                         req->pad = 0;   /* complete solid 16-byte block; does this matter? */
2820                         req->rdma_count = 1;
2821                         req->length = htons(seglen);
2822                         req->cksum_offset = cksum_offset;
2823                         req->flags = flags | ((cum_len & 1) * odd_flag);
2824
2825                         low += seglen;
2826                         len -= seglen;
2827                         cum_len = cum_len_next;
2828                         flags = flags_next;
2829                         req++;
2830                         count++;
2831                         rdma_count++;
2832                         if (cksum_offset != 0 && !(mss && skb_is_gso_v6(skb))) {
2833                                 if (unlikely(cksum_offset > seglen))
2834                                         cksum_offset -= seglen;
2835                                 else
2836                                         cksum_offset = 0;
2837                         }
2838                 }
2839                 if (frag_idx == frag_cnt)
2840                         break;
2841
2842                 /* map next fragment for DMA */
2843                 idx = (count + tx->req) & tx->mask;
2844                 frag = &skb_shinfo(skb)->frags[frag_idx];
2845                 frag_idx++;
2846                 len = frag->size;
2847                 bus = pci_map_page(mgp->pdev, frag->page, frag->page_offset,
2848                                    len, PCI_DMA_TODEVICE);
2849                 pci_unmap_addr_set(&tx->info[idx], bus, bus);
2850                 pci_unmap_len_set(&tx->info[idx], len, len);
2851         }
2852
2853         (req - rdma_count)->rdma_count = rdma_count;
2854         if (mss)
2855                 do {
2856                         req--;
2857                         req->flags |= MXGEFW_FLAGS_TSO_LAST;
2858                 } while (!(req->flags & (MXGEFW_FLAGS_TSO_CHOP |
2859                                          MXGEFW_FLAGS_FIRST)));
2860         idx = ((count - 1) + tx->req) & tx->mask;
2861         tx->info[idx].last = 1;
2862         myri10ge_submit_req(tx, tx->req_list, count);
2863         /* if using multiple tx queues, make sure NIC polls the
2864          * current slice */
2865         if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) {
2866                 tx->queue_active = 1;
2867                 put_be32(htonl(1), tx->send_go);
2868                 mb();
2869                 mmiowb();
2870         }
2871         tx->pkt_start++;
2872         if ((avail - count) < MXGEFW_MAX_SEND_DESC) {
2873                 tx->stop_queue++;
2874                 netif_tx_stop_queue(netdev_queue);
2875         }
2876         dev->trans_start = jiffies;
2877         return 0;
2878
2879 abort_linearize:
2880         /* Free any DMA resources we've alloced and clear out the skb
2881          * slot so as to not trip up assertions, and to avoid a
2882          * double-free if linearizing fails */
2883
2884         last_idx = (idx + 1) & tx->mask;
2885         idx = tx->req & tx->mask;
2886         tx->info[idx].skb = NULL;
2887         do {
2888                 len = pci_unmap_len(&tx->info[idx], len);
2889                 if (len) {
2890                         if (tx->info[idx].skb != NULL)
2891                                 pci_unmap_single(mgp->pdev,
2892                                                  pci_unmap_addr(&tx->info[idx],
2893                                                                 bus), len,
2894                                                  PCI_DMA_TODEVICE);
2895                         else
2896                                 pci_unmap_page(mgp->pdev,
2897                                                pci_unmap_addr(&tx->info[idx],
2898                                                               bus), len,
2899                                                PCI_DMA_TODEVICE);
2900                         pci_unmap_len_set(&tx->info[idx], len, 0);
2901                         tx->info[idx].skb = NULL;
2902                 }
2903                 idx = (idx + 1) & tx->mask;
2904         } while (idx != last_idx);
2905         if (skb_is_gso(skb)) {
2906                 printk(KERN_ERR
2907                        "myri10ge: %s: TSO but wanted to linearize?!?!?\n",
2908                        mgp->dev->name);
2909                 goto drop;
2910         }
2911
2912         if (skb_linearize(skb))
2913                 goto drop;
2914
2915         tx->linearized++;
2916         goto again;
2917
2918 drop:
2919         dev_kfree_skb_any(skb);
2920         ss->stats.tx_dropped += 1;
2921         return 0;
2922
2923 }
2924
2925 static int myri10ge_sw_tso(struct sk_buff *skb, struct net_device *dev)
2926 {
2927         struct sk_buff *segs, *curr;
2928         struct myri10ge_priv *mgp = netdev_priv(dev);
2929         struct myri10ge_slice_state *ss;
2930         int status;
2931
2932         segs = skb_gso_segment(skb, dev->features & ~NETIF_F_TSO6);
2933         if (IS_ERR(segs))
2934                 goto drop;
2935
2936         while (segs) {
2937                 curr = segs;
2938                 segs = segs->next;
2939                 curr->next = NULL;
2940                 status = myri10ge_xmit(curr, dev);
2941                 if (status != 0) {
2942                         dev_kfree_skb_any(curr);
2943                         if (segs != NULL) {
2944                                 curr = segs;
2945                                 segs = segs->next;
2946                                 curr->next = NULL;
2947                                 dev_kfree_skb_any(segs);
2948                         }
2949                         goto drop;
2950                 }
2951         }
2952         dev_kfree_skb_any(skb);
2953         return 0;
2954
2955 drop:
2956         ss = &mgp->ss[skb_get_queue_mapping(skb)];
2957         dev_kfree_skb_any(skb);
2958         ss->stats.tx_dropped += 1;
2959         return 0;
2960 }
2961
2962 static struct net_device_stats *myri10ge_get_stats(struct net_device *dev)
2963 {
2964         struct myri10ge_priv *mgp = netdev_priv(dev);
2965         struct myri10ge_slice_netstats *slice_stats;
2966         struct net_device_stats *stats = &mgp->stats;
2967         int i;
2968
2969         memset(stats, 0, sizeof(*stats));
2970         for (i = 0; i < mgp->num_slices; i++) {
2971                 slice_stats = &mgp->ss[i].stats;
2972                 stats->rx_packets += slice_stats->rx_packets;
2973                 stats->tx_packets += slice_stats->tx_packets;
2974                 stats->rx_bytes += slice_stats->rx_bytes;
2975                 stats->tx_bytes += slice_stats->tx_bytes;
2976                 stats->rx_dropped += slice_stats->rx_dropped;
2977                 stats->tx_dropped += slice_stats->tx_dropped;
2978         }
2979         return stats;
2980 }
2981
2982 static void myri10ge_set_multicast_list(struct net_device *dev)
2983 {
2984         struct myri10ge_priv *mgp = netdev_priv(dev);
2985         struct myri10ge_cmd cmd;
2986         struct dev_mc_list *mc_list;
2987         __be32 data[2] = { 0, 0 };
2988         int err;
2989
2990         /* can be called from atomic contexts,
2991          * pass 1 to force atomicity in myri10ge_send_cmd() */
2992         myri10ge_change_promisc(mgp, dev->flags & IFF_PROMISC, 1);
2993
2994         /* This firmware is known to not support multicast */
2995         if (!mgp->fw_multicast_support)
2996                 return;
2997
2998         /* Disable multicast filtering */
2999
3000         err = myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1);
3001         if (err != 0) {
3002                 printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_ENABLE_ALLMULTI,"
3003                        " error status: %d\n", dev->name, err);
3004                 goto abort;
3005         }
3006
3007         if ((dev->flags & IFF_ALLMULTI) || mgp->adopted_rx_filter_bug) {
3008                 /* request to disable multicast filtering, so quit here */
3009                 return;
3010         }
3011
3012         /* Flush the filters */
3013
3014         err = myri10ge_send_cmd(mgp, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
3015                                 &cmd, 1);
3016         if (err != 0) {
3017                 printk(KERN_ERR
3018                        "myri10ge: %s: Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS"
3019                        ", error status: %d\n", dev->name, err);
3020                 goto abort;
3021         }
3022
3023         /* Walk the multicast list, and add each address */
3024         for (mc_list = dev->mc_list; mc_list != NULL; mc_list = mc_list->next) {
3025                 memcpy(data, &mc_list->dmi_addr, 6);
3026                 cmd.data0 = ntohl(data[0]);
3027                 cmd.data1 = ntohl(data[1]);
3028                 err = myri10ge_send_cmd(mgp, MXGEFW_JOIN_MULTICAST_GROUP,
3029                                         &cmd, 1);
3030
3031                 if (err != 0) {
3032                         printk(KERN_ERR "myri10ge: %s: Failed "
3033                                "MXGEFW_JOIN_MULTICAST_GROUP, error status:"
3034                                "%d\t", dev->name, err);
3035                         printk(KERN_ERR "MAC %pM\n", mc_list->dmi_addr);
3036                         goto abort;
3037                 }
3038         }
3039         /* Enable multicast filtering */
3040         err = myri10ge_send_cmd(mgp, MXGEFW_DISABLE_ALLMULTI, &cmd, 1);
3041         if (err != 0) {
3042                 printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_DISABLE_ALLMULTI,"
3043                        "error status: %d\n", dev->name, err);
3044                 goto abort;
3045         }
3046
3047         return;
3048
3049 abort:
3050         return;
3051 }
3052
3053 static int myri10ge_set_mac_address(struct net_device *dev, void *addr)
3054 {
3055         struct sockaddr *sa = addr;
3056         struct myri10ge_priv *mgp = netdev_priv(dev);
3057         int status;
3058
3059         if (!is_valid_ether_addr(sa->sa_data))
3060                 return -EADDRNOTAVAIL;
3061
3062         status = myri10ge_update_mac_address(mgp, sa->sa_data);
3063         if (status != 0) {
3064                 printk(KERN_ERR
3065                        "myri10ge: %s: changing mac address failed with %d\n",
3066                        dev->name, status);
3067                 return status;
3068         }
3069
3070         /* change the dev structure */
3071         memcpy(dev->dev_addr, sa->sa_data, 6);
3072         return 0;
3073 }
3074
3075 static int myri10ge_change_mtu(struct net_device *dev, int new_mtu)
3076 {
3077         struct myri10ge_priv *mgp = netdev_priv(dev);
3078         int error = 0;
3079
3080         if ((new_mtu < 68) || (ETH_HLEN + new_mtu > MYRI10GE_MAX_ETHER_MTU)) {
3081                 printk(KERN_ERR "myri10ge: %s: new mtu (%d) is not valid\n",
3082                        dev->name, new_mtu);
3083                 return -EINVAL;
3084         }
3085         printk(KERN_INFO "%s: changing mtu from %d to %d\n",
3086                dev->name, dev->mtu, new_mtu);
3087         if (mgp->running) {
3088                 /* if we change the mtu on an active device, we must
3089                  * reset the device so the firmware sees the change */
3090                 myri10ge_close(dev);
3091                 dev->mtu = new_mtu;
3092                 myri10ge_open(dev);
3093         } else
3094                 dev->mtu = new_mtu;
3095
3096         return error;
3097 }
3098
3099 /*
3100  * Enable ECRC to align PCI-E Completion packets on an 8-byte boundary.
3101  * Only do it if the bridge is a root port since we don't want to disturb
3102  * any other device, except if forced with myri10ge_ecrc_enable > 1.
3103  */
3104
3105 static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp)
3106 {
3107         struct pci_dev *bridge = mgp->pdev->bus->self;
3108         struct device *dev = &mgp->pdev->dev;
3109         unsigned cap;
3110         unsigned err_cap;
3111         u16 val;
3112         u8 ext_type;
3113         int ret;
3114
3115         if (!myri10ge_ecrc_enable || !bridge)
3116                 return;
3117
3118         /* check that the bridge is a root port */
3119         cap = pci_find_capability(bridge, PCI_CAP_ID_EXP);
3120         pci_read_config_word(bridge, cap + PCI_CAP_FLAGS, &val);
3121         ext_type = (val & PCI_EXP_FLAGS_TYPE) >> 4;
3122         if (ext_type != PCI_EXP_TYPE_ROOT_PORT) {
3123                 if (myri10ge_ecrc_enable > 1) {
3124                         struct pci_dev *prev_bridge, *old_bridge = bridge;
3125
3126                         /* Walk the hierarchy up to the root port
3127                          * where ECRC has to be enabled */
3128                         do {
3129                                 prev_bridge = bridge;
3130                                 bridge = bridge->bus->self;
3131                                 if (!bridge || prev_bridge == bridge) {
3132                                         dev_err(dev,
3133                                                 "Failed to find root port"
3134                                                 " to force ECRC\n");
3135                                         return;
3136                                 }
3137                                 cap =
3138                                     pci_find_capability(bridge, PCI_CAP_ID_EXP);
3139                                 pci_read_config_word(bridge,
3140                                                      cap + PCI_CAP_FLAGS, &val);
3141                                 ext_type = (val & PCI_EXP_FLAGS_TYPE) >> 4;
3142                         } while (ext_type != PCI_EXP_TYPE_ROOT_PORT);
3143
3144                         dev_info(dev,
3145                                  "Forcing ECRC on non-root port %s"
3146                                  " (enabling on root port %s)\n",
3147                                  pci_name(old_bridge), pci_name(bridge));
3148                 } else {
3149                         dev_err(dev,
3150                                 "Not enabling ECRC on non-root port %s\n",
3151                                 pci_name(bridge));
3152                         return;
3153                 }
3154         }
3155
3156         cap = pci_find_ext_capability(bridge, PCI_EXT_CAP_ID_ERR);
3157         if (!cap)
3158                 return;
3159
3160         ret = pci_read_config_dword(bridge, cap + PCI_ERR_CAP, &err_cap);
3161         if (ret) {
3162                 dev_err(dev, "failed reading ext-conf-space of %s\n",
3163                         pci_name(bridge));
3164                 dev_err(dev, "\t pci=nommconf in use? "
3165                         "or buggy/incomplete/absent ACPI MCFG attr?\n");
3166                 return;
3167         }
3168         if (!(err_cap & PCI_ERR_CAP_ECRC_GENC))
3169                 return;
3170
3171         err_cap |= PCI_ERR_CAP_ECRC_GENE;
3172         pci_write_config_dword(bridge, cap + PCI_ERR_CAP, err_cap);
3173         dev_info(dev, "Enabled ECRC on upstream bridge %s\n", pci_name(bridge));
3174 }
3175
3176 /*
3177  * The Lanai Z8E PCI-E interface achieves higher Read-DMA throughput
3178  * when the PCI-E Completion packets are aligned on an 8-byte
3179  * boundary.  Some PCI-E chip sets always align Completion packets; on
3180  * the ones that do not, the alignment can be enforced by enabling
3181  * ECRC generation (if supported).
3182  *
3183  * When PCI-E Completion packets are not aligned, it is actually more
3184  * efficient to limit Read-DMA transactions to 2KB, rather than 4KB.
3185  *
3186  * If the driver can neither enable ECRC nor verify that it has
3187  * already been enabled, then it must use a firmware image which works
3188  * around unaligned completion packets (myri10ge_rss_ethp_z8e.dat), and it
3189  * should also ensure that it never gives the device a Read-DMA which is
3190  * larger than 2KB by setting the tx_boundary to 2KB.  If ECRC is
3191  * enabled, then the driver should use the aligned (myri10ge_rss_eth_z8e.dat)
3192  * firmware image, and set tx_boundary to 4KB.
3193  */
3194
3195 static void myri10ge_firmware_probe(struct myri10ge_priv *mgp)
3196 {
3197         struct pci_dev *pdev = mgp->pdev;
3198         struct device *dev = &pdev->dev;
3199         int status;
3200
3201         mgp->tx_boundary = 4096;
3202         /*
3203          * Verify the max read request size was set to 4KB
3204          * before trying the test with 4KB.
3205          */
3206         status = pcie_get_readrq(pdev);
3207         if (status < 0) {
3208                 dev_err(dev, "Couldn't read max read req size: %d\n", status);
3209                 goto abort;
3210         }
3211         if (status != 4096) {
3212                 dev_warn(dev, "Max Read Request size != 4096 (%d)\n", status);
3213                 mgp->tx_boundary = 2048;
3214         }
3215         /*
3216          * load the optimized firmware (which assumes aligned PCIe
3217          * completions) in order to see if it works on this host.
3218          */
3219         mgp->fw_name = myri10ge_fw_aligned;
3220         status = myri10ge_load_firmware(mgp, 1);
3221         if (status != 0) {
3222                 goto abort;
3223         }
3224
3225         /*
3226          * Enable ECRC if possible
3227          */
3228         myri10ge_enable_ecrc(mgp);
3229
3230         /*
3231          * Run a DMA test which watches for unaligned completions and
3232          * aborts on the first one seen.
3233          */
3234
3235         status = myri10ge_dma_test(mgp, MXGEFW_CMD_UNALIGNED_TEST);
3236         if (status == 0)
3237                 return;         /* keep the aligned firmware */
3238
3239         if (status != -E2BIG)
3240                 dev_warn(dev, "DMA test failed: %d\n", status);
3241         if (status == -ENOSYS)
3242                 dev_warn(dev, "Falling back to ethp! "
3243                          "Please install up to date fw\n");
3244 abort:
3245         /* fall back to using the unaligned firmware */
3246         mgp->tx_boundary = 2048;
3247         mgp->fw_name = myri10ge_fw_unaligned;
3248
3249 }
3250
3251 static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
3252 {
3253         if (myri10ge_force_firmware == 0) {
3254                 int link_width, exp_cap;
3255                 u16 lnk;
3256
3257                 exp_cap = pci_find_capability(mgp->pdev, PCI_CAP_ID_EXP);
3258                 pci_read_config_word(mgp->pdev, exp_cap + PCI_EXP_LNKSTA, &lnk);
3259                 link_width = (lnk >> 4) & 0x3f;
3260
3261                 /* Check to see if Link is less than 8 or if the
3262                  * upstream bridge is known to provide aligned
3263                  * completions */
3264                 if (link_width < 8) {
3265                         dev_info(&mgp->pdev->dev, "PCIE x%d Link\n",
3266                                  link_width);
3267                         mgp->tx_boundary = 4096;
3268                         mgp->fw_name = myri10ge_fw_aligned;
3269                 } else {
3270                         myri10ge_firmware_probe(mgp);
3271                 }
3272         } else {
3273                 if (myri10ge_force_firmware == 1) {
3274                         dev_info(&mgp->pdev->dev,
3275                                  "Assuming aligned completions (forced)\n");
3276                         mgp->tx_boundary = 4096;
3277                         mgp->fw_name = myri10ge_fw_aligned;
3278                 } else {
3279                         dev_info(&mgp->pdev->dev,
3280                                  "Assuming unaligned completions (forced)\n");
3281                         mgp->tx_boundary = 2048;
3282                         mgp->fw_name = myri10ge_fw_unaligned;
3283                 }
3284         }
3285         if (myri10ge_fw_name != NULL) {
3286                 dev_info(&mgp->pdev->dev, "overriding firmware to %s\n",
3287                          myri10ge_fw_name);
3288                 mgp->fw_name = myri10ge_fw_name;
3289         }
3290 }
3291
3292 #ifdef CONFIG_PM
3293 static int myri10ge_suspend(struct pci_dev *pdev, pm_message_t state)
3294 {
3295         struct myri10ge_priv *mgp;
3296         struct net_device *netdev;
3297
3298         mgp = pci_get_drvdata(pdev);
3299         if (mgp == NULL)
3300                 return -EINVAL;
3301         netdev = mgp->dev;
3302
3303         netif_device_detach(netdev);
3304         if (netif_running(netdev)) {
3305                 printk(KERN_INFO "myri10ge: closing %s\n", netdev->name);
3306                 rtnl_lock();
3307                 myri10ge_close(netdev);
3308                 rtnl_unlock();
3309         }
3310         myri10ge_dummy_rdma(mgp, 0);
3311         pci_save_state(pdev);
3312         pci_disable_device(pdev);
3313
3314         return pci_set_power_state(pdev, pci_choose_state(pdev, state));
3315 }
3316
3317 static int myri10ge_resume(struct pci_dev *pdev)
3318 {
3319         struct myri10ge_priv *mgp;
3320         struct net_device *netdev;
3321         int status;
3322         u16 vendor;
3323
3324         mgp = pci_get_drvdata(pdev);
3325         if (mgp == NULL)
3326                 return -EINVAL;
3327         netdev = mgp->dev;
3328         pci_set_power_state(pdev, 0);   /* zeros conf space as a side effect */
3329         msleep(5);              /* give card time to respond */
3330         pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
3331         if (vendor == 0xffff) {
3332                 printk(KERN_ERR "myri10ge: %s: device disappeared!\n",
3333                        mgp->dev->name);
3334                 return -EIO;
3335         }
3336
3337         status = pci_restore_state(pdev);
3338         if (status)
3339                 return status;
3340
3341         status = pci_enable_device(pdev);
3342         if (status) {
3343                 dev_err(&pdev->dev, "failed to enable device\n");
3344                 return status;
3345         }
3346
3347         pci_set_master(pdev);
3348
3349         myri10ge_reset(mgp);
3350         myri10ge_dummy_rdma(mgp, 1);
3351
3352         /* Save configuration space to be restored if the
3353          * nic resets due to a parity error */
3354         pci_save_state(pdev);
3355
3356         if (netif_running(netdev)) {
3357                 rtnl_lock();
3358                 status = myri10ge_open(netdev);
3359                 rtnl_unlock();
3360                 if (status != 0)
3361                         goto abort_with_enabled;
3362
3363         }
3364         netif_device_attach(netdev);
3365
3366         return 0;
3367
3368 abort_with_enabled:
3369         pci_disable_device(pdev);
3370         return -EIO;
3371
3372 }
3373 #endif                          /* CONFIG_PM */
3374
3375 static u32 myri10ge_read_reboot(struct myri10ge_priv *mgp)
3376 {
3377         struct pci_dev *pdev = mgp->pdev;
3378         int vs = mgp->vendor_specific_offset;
3379         u32 reboot;
3380
3381         /*enter read32 mode */
3382         pci_write_config_byte(pdev, vs + 0x10, 0x3);
3383
3384         /*read REBOOT_STATUS (0xfffffff0) */
3385         pci_write_config_dword(pdev, vs + 0x18, 0xfffffff0);
3386         pci_read_config_dword(pdev, vs + 0x14, &reboot);
3387         return reboot;
3388 }
3389
3390 /*
3391  * This watchdog is used to check whether the board has suffered
3392  * from a parity error and needs to be recovered.
3393  */
3394 static void myri10ge_watchdog(struct work_struct *work)
3395 {
3396         struct myri10ge_priv *mgp =
3397             container_of(work, struct myri10ge_priv, watchdog_work);
3398         struct myri10ge_tx_buf *tx;
3399         u32 reboot;
3400         int status;
3401         int i;
3402         u16 cmd, vendor;
3403
3404         mgp->watchdog_resets++;
3405         pci_read_config_word(mgp->pdev, PCI_COMMAND, &cmd);
3406         if ((cmd & PCI_COMMAND_MASTER) == 0) {
3407                 /* Bus master DMA disabled?  Check to see
3408                  * if the card rebooted due to a parity error
3409                  * For now, just report it */
3410                 reboot = myri10ge_read_reboot(mgp);
3411                 printk(KERN_ERR
3412                        "myri10ge: %s: NIC rebooted (0x%x),%s resetting\n",
3413                        mgp->dev->name, reboot,
3414                        myri10ge_reset_recover ? " " : " not");
3415                 if (myri10ge_reset_recover == 0)
3416                         return;
3417
3418                 myri10ge_reset_recover--;
3419
3420                 /*
3421                  * A rebooted nic will come back with config space as
3422                  * it was after power was applied to PCIe bus.
3423                  * Attempt to restore config space which was saved
3424                  * when the driver was loaded, or the last time the
3425                  * nic was resumed from power saving mode.
3426                  */
3427                 pci_restore_state(mgp->pdev);
3428
3429                 /* save state again for accounting reasons */
3430                 pci_save_state(mgp->pdev);
3431
3432         } else {
3433                 /* if we get back -1's from our slot, perhaps somebody
3434                  * powered off our card.  Don't try to reset it in
3435                  * this case */
3436                 if (cmd == 0xffff) {
3437                         pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
3438                         if (vendor == 0xffff) {
3439                                 printk(KERN_ERR
3440                                        "myri10ge: %s: device disappeared!\n",
3441                                        mgp->dev->name);
3442                                 return;
3443                         }
3444                 }
3445                 /* Perhaps it is a software error.  Try to reset */
3446
3447                 printk(KERN_ERR "myri10ge: %s: device timeout, resetting\n",
3448                        mgp->dev->name);
3449                 for (i = 0; i < mgp->num_slices; i++) {
3450                         tx = &mgp->ss[i].tx;
3451                         printk(KERN_INFO
3452                                "myri10ge: %s: (%d): %d %d %d %d %d %d\n",
3453                                mgp->dev->name, i, tx->queue_active, tx->req,
3454                                tx->done, tx->pkt_start, tx->pkt_done,
3455                                (int)ntohl(mgp->ss[i].fw_stats->
3456                                           send_done_count));
3457                         msleep(2000);
3458                         printk(KERN_INFO
3459                                "myri10ge: %s: (%d): %d %d %d %d %d %d\n",
3460                                mgp->dev->name, i, tx->queue_active, tx->req,
3461                                tx->done, tx->pkt_start, tx->pkt_done,
3462                                (int)ntohl(mgp->ss[i].fw_stats->
3463                                           send_done_count));
3464                 }
3465         }
3466
3467         rtnl_lock();
3468         myri10ge_close(mgp->dev);
3469         status = myri10ge_load_firmware(mgp, 1);
3470         if (status != 0)
3471                 printk(KERN_ERR "myri10ge: %s: failed to load firmware\n",
3472                        mgp->dev->name);
3473         else
3474                 myri10ge_open(mgp->dev);
3475         rtnl_unlock();
3476 }
3477
3478 /*
3479  * We use our own timer routine rather than relying upon
3480  * netdev->tx_timeout because we have a very large hardware transmit
3481  * queue.  Due to the large queue, the netdev->tx_timeout function
3482  * cannot detect a NIC with a parity error in a timely fashion if the
3483  * NIC is lightly loaded.
3484  */
3485 static void myri10ge_watchdog_timer(unsigned long arg)
3486 {
3487         struct myri10ge_priv *mgp;
3488         struct myri10ge_slice_state *ss;
3489         int i, reset_needed;
3490         u32 rx_pause_cnt;
3491
3492         mgp = (struct myri10ge_priv *)arg;
3493
3494         rx_pause_cnt = ntohl(mgp->ss[0].fw_stats->dropped_pause);
3495         for (i = 0, reset_needed = 0;
3496              i < mgp->num_slices && reset_needed == 0; ++i) {
3497
3498                 ss = &mgp->ss[i];
3499                 if (ss->rx_small.watchdog_needed) {
3500                         myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
3501                                                 mgp->small_bytes + MXGEFW_PAD,
3502                                                 1);
3503                         if (ss->rx_small.fill_cnt - ss->rx_small.cnt >=
3504                             myri10ge_fill_thresh)
3505                                 ss->rx_small.watchdog_needed = 0;
3506                 }
3507                 if (ss->rx_big.watchdog_needed) {
3508                         myri10ge_alloc_rx_pages(mgp, &ss->rx_big,
3509                                                 mgp->big_bytes, 1);
3510                         if (ss->rx_big.fill_cnt - ss->rx_big.cnt >=
3511                             myri10ge_fill_thresh)
3512                                 ss->rx_big.watchdog_needed = 0;
3513                 }
3514
3515                 if (ss->tx.req != ss->tx.done &&
3516                     ss->tx.done == ss->watchdog_tx_done &&
3517                     ss->watchdog_tx_req != ss->watchdog_tx_done) {
3518                         /* nic seems like it might be stuck.. */
3519                         if (rx_pause_cnt != mgp->watchdog_pause) {
3520                                 if (net_ratelimit())
3521                                         printk(KERN_WARNING
3522                                                "myri10ge %s slice %d:"
3523                                                "TX paused, check link partner\n",
3524                                                mgp->dev->name, i);
3525                         } else {
3526                                 printk(KERN_WARNING
3527                                        "myri10ge %s slice %d stuck:",
3528                                        mgp->dev->name, i);
3529                                 reset_needed = 1;
3530                         }
3531                 }
3532                 ss->watchdog_tx_done = ss->tx.done;
3533                 ss->watchdog_tx_req = ss->tx.req;
3534         }
3535         mgp->watchdog_pause = rx_pause_cnt;
3536
3537         if (reset_needed) {
3538                 schedule_work(&mgp->watchdog_work);
3539         } else {
3540                 /* rearm timer */
3541                 mod_timer(&mgp->watchdog_timer,
3542                           jiffies + myri10ge_watchdog_timeout * HZ);
3543         }
3544 }
3545
3546 static void myri10ge_free_slices(struct myri10ge_priv *mgp)
3547 {
3548         struct myri10ge_slice_state *ss;
3549         struct pci_dev *pdev = mgp->pdev;
3550         size_t bytes;
3551         int i;
3552
3553         if (mgp->ss == NULL)
3554                 return;
3555
3556         for (i = 0; i < mgp->num_slices; i++) {
3557                 ss = &mgp->ss[i];
3558                 if (ss->rx_done.entry != NULL) {
3559                         bytes = mgp->max_intr_slots *
3560                             sizeof(*ss->rx_done.entry);
3561                         dma_free_coherent(&pdev->dev, bytes,
3562                                           ss->rx_done.entry, ss->rx_done.bus);
3563                         ss->rx_done.entry = NULL;
3564                 }
3565                 if (ss->fw_stats != NULL) {
3566                         bytes = sizeof(*ss->fw_stats);
3567                         dma_free_coherent(&pdev->dev, bytes,
3568                                           ss->fw_stats, ss->fw_stats_bus);
3569                         ss->fw_stats = NULL;
3570                 }
3571         }
3572         kfree(mgp->ss);
3573         mgp->ss = NULL;
3574 }
3575
3576 static int myri10ge_alloc_slices(struct myri10ge_priv *mgp)
3577 {
3578         struct myri10ge_slice_state *ss;
3579         struct pci_dev *pdev = mgp->pdev;
3580         size_t bytes;
3581         int i;
3582
3583         bytes = sizeof(*mgp->ss) * mgp->num_slices;
3584         mgp->ss = kzalloc(bytes, GFP_KERNEL);
3585         if (mgp->ss == NULL) {
3586                 return -ENOMEM;
3587         }
3588
3589         for (i = 0; i < mgp->num_slices; i++) {
3590                 ss = &mgp->ss[i];
3591                 bytes = mgp->max_intr_slots * sizeof(*ss->rx_done.entry);
3592                 ss->rx_done.entry = dma_alloc_coherent(&pdev->dev, bytes,
3593                                                        &ss->rx_done.bus,
3594                                                        GFP_KERNEL);
3595                 if (ss->rx_done.entry == NULL)
3596                         goto abort;
3597                 memset(ss->rx_done.entry, 0, bytes);
3598                 bytes = sizeof(*ss->fw_stats);
3599                 ss->fw_stats = dma_alloc_coherent(&pdev->dev, bytes,
3600                                                   &ss->fw_stats_bus,
3601                                                   GFP_KERNEL);
3602                 if (ss->fw_stats == NULL)
3603                         goto abort;
3604                 ss->mgp = mgp;
3605                 ss->dev = mgp->dev;
3606                 netif_napi_add(ss->dev, &ss->napi, myri10ge_poll,
3607                                myri10ge_napi_weight);
3608         }
3609         return 0;
3610 abort:
3611         myri10ge_free_slices(mgp);
3612         return -ENOMEM;
3613 }
3614
3615 /*
3616  * This function determines the number of slices supported.
3617  * The number slices is the minumum of the number of CPUS,
3618  * the number of MSI-X irqs supported, the number of slices
3619  * supported by the firmware
3620  */
3621 static void myri10ge_probe_slices(struct myri10ge_priv *mgp)
3622 {
3623         struct myri10ge_cmd cmd;
3624         struct pci_dev *pdev = mgp->pdev;
3625         char *old_fw;
3626         int i, status, ncpus, msix_cap;
3627
3628         mgp->num_slices = 1;
3629         msix_cap = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
3630         ncpus = num_online_cpus();
3631
3632         if (myri10ge_max_slices == 1 || msix_cap == 0 ||
3633             (myri10ge_max_slices == -1 && ncpus < 2))
3634                 return;
3635
3636         /* try to load the slice aware rss firmware */
3637         old_fw = mgp->fw_name;
3638         if (myri10ge_fw_name != NULL) {
3639                 dev_info(&mgp->pdev->dev, "overriding rss firmware to %s\n",
3640                          myri10ge_fw_name);
3641                 mgp->fw_name = myri10ge_fw_name;
3642         } else if (old_fw == myri10ge_fw_aligned)
3643                 mgp->fw_name = myri10ge_fw_rss_aligned;
3644         else
3645                 mgp->fw_name = myri10ge_fw_rss_unaligned;
3646         status = myri10ge_load_firmware(mgp, 0);
3647         if (status != 0) {
3648                 dev_info(&pdev->dev, "Rss firmware not found\n");
3649                 return;
3650         }
3651
3652         /* hit the board with a reset to ensure it is alive */
3653         memset(&cmd, 0, sizeof(cmd));
3654         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
3655         if (status != 0) {
3656                 dev_err(&mgp->pdev->dev, "failed reset\n");
3657                 goto abort_with_fw;
3658                 return;
3659         }
3660
3661         mgp->max_intr_slots = cmd.data0 / sizeof(struct mcp_slot);
3662
3663         /* tell it the size of the interrupt queues */
3664         cmd.data0 = mgp->max_intr_slots * sizeof(struct mcp_slot);
3665         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
3666         if (status != 0) {
3667                 dev_err(&mgp->pdev->dev, "failed MXGEFW_CMD_SET_INTRQ_SIZE\n");
3668                 goto abort_with_fw;
3669         }
3670
3671         /* ask the maximum number of slices it supports */
3672         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES, &cmd, 0);
3673         if (status != 0)
3674                 goto abort_with_fw;
3675         else
3676                 mgp->num_slices = cmd.data0;
3677
3678         /* Only allow multiple slices if MSI-X is usable */
3679         if (!myri10ge_msi) {
3680                 goto abort_with_fw;
3681         }
3682
3683         /* if the admin did not specify a limit to how many
3684          * slices we should use, cap it automatically to the
3685          * number of CPUs currently online */
3686         if (myri10ge_max_slices == -1)
3687                 myri10ge_max_slices = ncpus;
3688
3689         if (mgp->num_slices > myri10ge_max_slices)
3690                 mgp->num_slices = myri10ge_max_slices;
3691
3692         /* Now try to allocate as many MSI-X vectors as we have
3693          * slices. We give up on MSI-X if we can only get a single
3694          * vector. */
3695
3696         mgp->msix_vectors = kzalloc(mgp->num_slices *
3697                                     sizeof(*mgp->msix_vectors), GFP_KERNEL);
3698         if (mgp->msix_vectors == NULL)
3699                 goto disable_msix;
3700         for (i = 0; i < mgp->num_slices; i++) {
3701                 mgp->msix_vectors[i].entry = i;
3702         }
3703
3704         while (mgp->num_slices > 1) {
3705                 /* make sure it is a power of two */
3706                 while (!is_power_of_2(mgp->num_slices))
3707                         mgp->num_slices--;
3708                 if (mgp->num_slices == 1)
3709                         goto disable_msix;
3710                 status = pci_enable_msix(pdev, mgp->msix_vectors,
3711                                          mgp->num_slices);
3712                 if (status == 0) {
3713                         pci_disable_msix(pdev);
3714                         return;
3715                 }
3716                 if (status > 0)
3717                         mgp->num_slices = status;
3718                 else
3719                         goto disable_msix;
3720         }
3721
3722 disable_msix:
3723         if (mgp->msix_vectors != NULL) {
3724                 kfree(mgp->msix_vectors);
3725                 mgp->msix_vectors = NULL;
3726         }
3727
3728 abort_with_fw:
3729         mgp->num_slices = 1;
3730         mgp->fw_name = old_fw;
3731         myri10ge_load_firmware(mgp, 0);
3732 }
3733
3734 static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
3735 {
3736         struct net_device *netdev;
3737         struct myri10ge_priv *mgp;
3738         struct device *dev = &pdev->dev;
3739         int i;
3740         int status = -ENXIO;
3741         int dac_enabled;
3742         unsigned hdr_offset, ss_offset;
3743
3744         netdev = alloc_etherdev_mq(sizeof(*mgp), MYRI10GE_MAX_SLICES);
3745         if (netdev == NULL) {
3746                 dev_err(dev, "Could not allocate ethernet device\n");
3747                 return -ENOMEM;
3748         }
3749
3750         SET_NETDEV_DEV(netdev, &pdev->dev);
3751
3752         mgp = netdev_priv(netdev);
3753         mgp->dev = netdev;
3754         mgp->pdev = pdev;
3755         mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
3756         mgp->pause = myri10ge_flow_control;
3757         mgp->intr_coal_delay = myri10ge_intr_coal_delay;
3758         mgp->msg_enable = netif_msg_init(myri10ge_debug, MYRI10GE_MSG_DEFAULT);
3759         init_waitqueue_head(&mgp->down_wq);
3760
3761         if (pci_enable_device(pdev)) {
3762                 dev_err(&pdev->dev, "pci_enable_device call failed\n");
3763                 status = -ENODEV;
3764                 goto abort_with_netdev;
3765         }
3766
3767         /* Find the vendor-specific cap so we can check
3768          * the reboot register later on */
3769         mgp->vendor_specific_offset
3770             = pci_find_capability(pdev, PCI_CAP_ID_VNDR);
3771
3772         /* Set our max read request to 4KB */
3773         status = pcie_set_readrq(pdev, 4096);
3774         if (status != 0) {
3775                 dev_err(&pdev->dev, "Error %d writing PCI_EXP_DEVCTL\n",
3776                         status);
3777                 goto abort_with_netdev;
3778         }
3779
3780         pci_set_master(pdev);
3781         dac_enabled = 1;
3782         status = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
3783         if (status != 0) {
3784                 dac_enabled = 0;
3785                 dev_err(&pdev->dev,
3786                         "64-bit pci address mask was refused, "
3787                         "trying 32-bit\n");
3788                 status = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
3789         }
3790         if (status != 0) {
3791                 dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
3792                 goto abort_with_netdev;
3793         }
3794         (void)pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
3795         mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
3796                                       &mgp->cmd_bus, GFP_KERNEL);
3797         if (mgp->cmd == NULL)
3798                 goto abort_with_netdev;
3799
3800         mgp->board_span = pci_resource_len(pdev, 0);
3801         mgp->iomem_base = pci_resource_start(pdev, 0);
3802         mgp->mtrr = -1;
3803         mgp->wc_enabled = 0;
3804 #ifdef CONFIG_MTRR
3805         mgp->mtrr = mtrr_add(mgp->iomem_base, mgp->board_span,
3806                              MTRR_TYPE_WRCOMB, 1);
3807         if (mgp->mtrr >= 0)
3808                 mgp->wc_enabled = 1;
3809 #endif
3810         mgp->sram = ioremap_wc(mgp->iomem_base, mgp->board_span);
3811         if (mgp->sram == NULL) {
3812                 dev_err(&pdev->dev, "ioremap failed for %ld bytes at 0x%lx\n",
3813                         mgp->board_span, mgp->iomem_base);
3814                 status = -ENXIO;
3815                 goto abort_with_mtrr;
3816         }
3817         hdr_offset =
3818             ntohl(__raw_readl(mgp->sram + MCP_HEADER_PTR_OFFSET)) & 0xffffc;
3819         ss_offset = hdr_offset + offsetof(struct mcp_gen_header, string_specs);
3820         mgp->sram_size = ntohl(__raw_readl(mgp->sram + ss_offset));
3821         if (mgp->sram_size > mgp->board_span ||
3822             mgp->sram_size <= MYRI10GE_FW_OFFSET) {
3823                 dev_err(&pdev->dev,
3824                         "invalid sram_size %dB or board span %ldB\n",
3825                         mgp->sram_size, mgp->board_span);
3826                 goto abort_with_ioremap;
3827         }
3828         memcpy_fromio(mgp->eeprom_strings,
3829                       mgp->sram + mgp->sram_size, MYRI10GE_EEPROM_STRINGS_SIZE);
3830         memset(mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE - 2, 0, 2);
3831         status = myri10ge_read_mac_addr(mgp);
3832         if (status)
3833                 goto abort_with_ioremap;
3834
3835         for (i = 0; i < ETH_ALEN; i++)
3836                 netdev->dev_addr[i] = mgp->mac_addr[i];
3837
3838         myri10ge_select_firmware(mgp);
3839
3840         status = myri10ge_load_firmware(mgp, 1);
3841         if (status != 0) {
3842                 dev_err(&pdev->dev, "failed to load firmware\n");
3843                 goto abort_with_ioremap;
3844         }
3845         myri10ge_probe_slices(mgp);
3846         status = myri10ge_alloc_slices(mgp);
3847         if (status != 0) {
3848                 dev_err(&pdev->dev, "failed to alloc slice state\n");
3849                 goto abort_with_firmware;
3850         }
3851         netdev->real_num_tx_queues = mgp->num_slices;
3852         status = myri10ge_reset(mgp);
3853         if (status != 0) {
3854                 dev_err(&pdev->dev, "failed reset\n");
3855                 goto abort_with_slices;
3856         }
3857 #ifdef CONFIG_MYRI10GE_DCA
3858         myri10ge_setup_dca(mgp);
3859 #endif
3860         pci_set_drvdata(pdev, mgp);
3861         if ((myri10ge_initial_mtu + ETH_HLEN) > MYRI10GE_MAX_ETHER_MTU)
3862                 myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
3863         if ((myri10ge_initial_mtu + ETH_HLEN) < 68)
3864                 myri10ge_initial_mtu = 68;
3865         netdev->mtu = myri10ge_initial_mtu;
3866         netdev->open = myri10ge_open;
3867         netdev->stop = myri10ge_close;
3868         netdev->hard_start_xmit = myri10ge_xmit;
3869         netdev->get_stats = myri10ge_get_stats;
3870         netdev->base_addr = mgp->iomem_base;
3871         netdev->change_mtu = myri10ge_change_mtu;
3872         netdev->set_multicast_list = myri10ge_set_multicast_list;
3873         netdev->set_mac_address = myri10ge_set_mac_address;
3874         netdev->features = mgp->features;
3875
3876         if (dac_enabled)
3877                 netdev->features |= NETIF_F_HIGHDMA;
3878
3879         /* make sure we can get an irq, and that MSI can be
3880          * setup (if available).  Also ensure netdev->irq
3881          * is set to correct value if MSI is enabled */
3882         status = myri10ge_request_irq(mgp);
3883         if (status != 0)
3884                 goto abort_with_firmware;
3885         netdev->irq = pdev->irq;
3886         myri10ge_free_irq(mgp);
3887
3888         /* Save configuration space to be restored if the
3889          * nic resets due to a parity error */
3890         pci_save_state(pdev);
3891
3892         /* Setup the watchdog timer */
3893         setup_timer(&mgp->watchdog_timer, myri10ge_watchdog_timer,
3894                     (unsigned long)mgp);
3895
3896         SET_ETHTOOL_OPS(netdev, &myri10ge_ethtool_ops);
3897         INIT_WORK(&mgp->watchdog_work, myri10ge_watchdog);
3898         status = register_netdev(netdev);
3899         if (status != 0) {
3900                 dev_err(&pdev->dev, "register_netdev failed: %d\n", status);
3901                 goto abort_with_state;
3902         }
3903         if (mgp->msix_enabled)
3904                 dev_info(dev, "%d MSI-X IRQs, tx bndry %d, fw %s, WC %s\n",
3905                          mgp->num_slices, mgp->tx_boundary, mgp->fw_name,
3906                          (mgp->wc_enabled ? "Enabled" : "Disabled"));
3907         else
3908                 dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, WC %s\n",
3909                          mgp->msi_enabled ? "MSI" : "xPIC",
3910                          netdev->irq, mgp->tx_boundary, mgp->fw_name,
3911                          (mgp->wc_enabled ? "Enabled" : "Disabled"));
3912
3913         return 0;
3914
3915 abort_with_state:
3916         pci_restore_state(pdev);
3917
3918 abort_with_slices:
3919         myri10ge_free_slices(mgp);
3920
3921 abort_with_firmware:
3922         myri10ge_dummy_rdma(mgp, 0);
3923
3924 abort_with_ioremap:
3925         iounmap(mgp->sram);
3926
3927 abort_with_mtrr:
3928 #ifdef CONFIG_MTRR
3929         if (mgp->mtrr >= 0)
3930                 mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
3931 #endif
3932         dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
3933                           mgp->cmd, mgp->cmd_bus);
3934
3935 abort_with_netdev:
3936
3937         free_netdev(netdev);
3938         return status;
3939 }
3940
3941 /*
3942  * myri10ge_remove
3943  *
3944  * Does what is necessary to shutdown one Myrinet device. Called
3945  *   once for each Myrinet card by the kernel when a module is
3946  *   unloaded.
3947  */
3948 static void myri10ge_remove(struct pci_dev *pdev)
3949 {
3950         struct myri10ge_priv *mgp;
3951         struct net_device *netdev;
3952
3953         mgp = pci_get_drvdata(pdev);
3954         if (mgp == NULL)
3955                 return;
3956
3957         flush_scheduled_work();
3958         netdev = mgp->dev;
3959         unregister_netdev(netdev);
3960
3961 #ifdef CONFIG_MYRI10GE_DCA
3962         myri10ge_teardown_dca(mgp);
3963 #endif
3964         myri10ge_dummy_rdma(mgp, 0);
3965
3966         /* avoid a memory leak */
3967         pci_restore_state(pdev);
3968
3969         iounmap(mgp->sram);
3970
3971 #ifdef CONFIG_MTRR
3972         if (mgp->mtrr >= 0)
3973                 mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
3974 #endif
3975         myri10ge_free_slices(mgp);
3976         if (mgp->msix_vectors != NULL)
3977                 kfree(mgp->msix_vectors);
3978         dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
3979                           mgp->cmd, mgp->cmd_bus);
3980
3981         free_netdev(netdev);
3982         pci_set_drvdata(pdev, NULL);
3983 }
3984
3985 #define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E      0x0008
3986 #define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9    0x0009
3987
3988 static struct pci_device_id myri10ge_pci_tbl[] = {
3989         {PCI_DEVICE(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E)},
3990         {PCI_DEVICE
3991          (PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9)},
3992         {0},
3993 };
3994
3995 static struct pci_driver myri10ge_driver = {
3996         .name = "myri10ge",
3997         .probe = myri10ge_probe,
3998         .remove = myri10ge_remove,
3999         .id_table = myri10ge_pci_tbl,
4000 #ifdef CONFIG_PM
4001         .suspend = myri10ge_suspend,
4002         .resume = myri10ge_resume,
4003 #endif
4004 };
4005
4006 #ifdef CONFIG_MYRI10GE_DCA
4007 static int
4008 myri10ge_notify_dca(struct notifier_block *nb, unsigned long event, void *p)
4009 {
4010         int err = driver_for_each_device(&myri10ge_driver.driver,
4011                                          NULL, &event,
4012                                          myri10ge_notify_dca_device);
4013
4014         if (err)
4015                 return NOTIFY_BAD;
4016         return NOTIFY_DONE;
4017 }
4018
4019 static struct notifier_block myri10ge_dca_notifier = {
4020         .notifier_call = myri10ge_notify_dca,
4021         .next = NULL,
4022         .priority = 0,
4023 };
4024 #endif                          /* CONFIG_DCA */
4025
4026 static __init int myri10ge_init_module(void)
4027 {
4028         printk(KERN_INFO "%s: Version %s\n", myri10ge_driver.name,
4029                MYRI10GE_VERSION_STR);
4030
4031         if (myri10ge_rss_hash > MXGEFW_RSS_HASH_TYPE_MAX) {
4032                 printk(KERN_ERR
4033                        "%s: Illegal rssh hash type %d, defaulting to source port\n",
4034                        myri10ge_driver.name, myri10ge_rss_hash);
4035                 myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
4036         }
4037 #ifdef CONFIG_MYRI10GE_DCA
4038         dca_register_notify(&myri10ge_dca_notifier);
4039 #endif
4040         if (myri10ge_max_slices > MYRI10GE_MAX_SLICES)
4041                 myri10ge_max_slices = MYRI10GE_MAX_SLICES;
4042
4043         return pci_register_driver(&myri10ge_driver);
4044 }
4045
4046 module_init(myri10ge_init_module);
4047
4048 static __exit void myri10ge_cleanup_module(void)
4049 {
4050 #ifdef CONFIG_MYRI10GE_DCA
4051         dca_unregister_notify(&myri10ge_dca_notifier);
4052 #endif
4053         pci_unregister_driver(&myri10ge_driver);
4054 }
4055
4056 module_exit(myri10ge_cleanup_module);