drivers/mmc/host/atmel-mci.c

   1 /*
   2  * Atmel MultiMedia Card Interface driver
   3  *
   4  * Copyright (C) 2004-2008 Atmel Corporation
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10 #include <linux/blkdev.h>
  11 #include <linux/clk.h>
  12 #include <linux/debugfs.h>
  13 #include <linux/device.h>
  14 #include <linux/dmaengine.h>
  15 #include <linux/dma-mapping.h>
  16 #include <linux/err.h>
  17 #include <linux/gpio.h>
  18 #include <linux/init.h>
  19 #include <linux/interrupt.h>
  20 #include <linux/ioport.h>
  21 #include <linux/module.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/scatterlist.h>
  24 #include <linux/seq_file.h>
  25 #include <linux/stat.h>
  26
  27 #include <linux/mmc/host.h>
  28 #include <linux/atmel-mci.h>
  29
  30 #include <asm/io.h>
  31 #include <asm/unaligned.h>
  32
  33 #include <mach/cpu.h>
  34 #include <mach/board.h>
  35
  36 #include "atmel-mci-regs.h"
  37
  38 #define ATMCI_DATA_ERROR_FLAGS  (MCI_DCRCE | MCI_DTOE | MCI_OVRE | MCI_UNRE)
  39 #define ATMCI_DMA_THRESHOLD     16
  40
  41 enum {
  42         EVENT_CMD_COMPLETE = 0,
  43         EVENT_XFER_COMPLETE,
  44         EVENT_DATA_COMPLETE,
  45         EVENT_DATA_ERROR,
  46 };
  47
  48 enum atmel_mci_state {
  49         STATE_IDLE = 0,
  50         STATE_SENDING_CMD,
  51         STATE_SENDING_DATA,
  52         STATE_DATA_BUSY,
  53         STATE_SENDING_STOP,
  54         STATE_DATA_ERROR,
  55 };
  56
  57 struct atmel_mci_dma {
  58 #ifdef CONFIG_MMC_ATMELMCI_DMA
  59         struct dma_chan                 *chan;
  60         struct dma_async_tx_descriptor  *data_desc;
  61 #endif
  62 };
  63
  64 /**
  65  * struct atmel_mci - MMC controller state shared between all slots
  66  * @lock: Spinlock protecting the queue and associated data.
  67  * @regs: Pointer to MMIO registers.
  68  * @sg: Scatterlist entry currently being processed by PIO code, if any.
  69  * @pio_offset: Offset into the current scatterlist entry.
  70  * @cur_slot: The slot which is currently using the controller.
  71  * @mrq: The request currently being processed on @cur_slot,
  72  *      or NULL if the controller is idle.
  73  * @cmd: The command currently being sent to the card, or NULL.
  74  * @data: The data currently being transferred, or NULL if no data
  75  *      transfer is in progress.
  76  * @dma: DMA client state.
  77  * @data_chan: DMA channel being used for the current data transfer.
  78  * @cmd_status: Snapshot of SR taken upon completion of the current
  79  *      command. Only valid when EVENT_CMD_COMPLETE is pending.
  80  * @data_status: Snapshot of SR taken upon completion of the current
  81  *      data transfer. Only valid when EVENT_DATA_COMPLETE or
  82  *      EVENT_DATA_ERROR is pending.
  83  * @stop_cmdr: Value to be loaded into CMDR when the stop command is
  84  *      to be sent.
  85  * @tasklet: Tasklet running the request state machine.
  86  * @pending_events: Bitmask of events flagged by the interrupt handler
  87  *      to be processed by the tasklet.
  88  * @completed_events: Bitmask of events which the state machine has
  89  *      processed.
  90  * @state: Tasklet state.
  91  * @queue: List of slots waiting for access to the controller.
  92  * @need_clock_update: Update the clock rate before the next request.
  93  * @need_reset: Reset controller before next request.
  94  * @mode_reg: Value of the MR register.
  95  * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus
  96  *      rate and timeout calculations.
  97  * @mapbase: Physical address of the MMIO registers.
  98  * @mck: The peripheral bus clock hooked up to the MMC controller.
  99  * @pdev: Platform device associated with the MMC controller.
 100  * @slot: Slots sharing this MMC controller.
 101  *
 102  * Locking
 103  * =======
 104  *
 105  * @lock is a softirq-safe spinlock protecting @queue as well as
 106  * @cur_slot, @mrq and @state. These must always be updated
 107  * at the same time while holding @lock.
 108  *
 109  * @lock also protects mode_reg and need_clock_update since these are
 110  * used to synchronize mode register updates with the queue
 111  * processing.
 112  *
 113  * The @mrq field of struct atmel_mci_slot is also protected by @lock,
 114  * and must always be written at the same time as the slot is added to
 115  * @queue.
 116  *
 117  * @pending_events and @completed_events are accessed using atomic bit
 118  * operations, so they don't need any locking.
 119  *
 120  * None of the fields touched by the interrupt handler need any
 121  * locking. However, ordering is important: Before EVENT_DATA_ERROR or
 122  * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
 123  * interrupts must be disabled and @data_status updated with a
 124  * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
 125  * CMDRDY interupt must be disabled and @cmd_status updated with a
 126  * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
 127  * bytes_xfered field of @data must be written. This is ensured by
 128  * using barriers.
 129  */
 130 struct atmel_mci {
 131         spinlock_t              lock;
 132         void __iomem            *regs;
 133
 134         struct scatterlist      *sg;
 135         unsigned int            pio_offset;
 136
 137         struct atmel_mci_slot   *cur_slot;
 138         struct mmc_request      *mrq;
 139         struct mmc_command      *cmd;
 140         struct mmc_data         *data;
 141
 142         struct atmel_mci_dma    dma;
 143         struct dma_chan         *data_chan;
 144
 145         u32                     cmd_status;
 146         u32                     data_status;
 147         u32                     stop_cmdr;
 148
 149         struct tasklet_struct   tasklet;
 150         unsigned long           pending_events;
 151         unsigned long           completed_events;
 152         enum atmel_mci_state    state;
 153         struct list_head        queue;
 154
 155         bool                    need_clock_update;
 156         bool                    need_reset;
 157         u32                     mode_reg;
 158         unsigned long           bus_hz;
 159         unsigned long           mapbase;
 160         struct clk              *mck;
 161         struct platform_device  *pdev;
 162
 163         struct atmel_mci_slot   *slot[ATMEL_MCI_MAX_NR_SLOTS];
 164 };
 165
 166 /**
 167  * struct atmel_mci_slot - MMC slot state
 168  * @mmc: The mmc_host representing this slot.
 169  * @host: The MMC controller this slot is using.
 170  * @sdc_reg: Value of SDCR to be written before using this slot.
 171  * @mrq: mmc_request currently being processed or waiting to be
 172  *      processed, or NULL when the slot is idle.
 173  * @queue_node: List node for placing this node in the @queue list of
 174  *      &struct atmel_mci.
 175  * @clock: Clock rate configured by set_ios(). Protected by host->lock.
 176  * @flags: Random state bits associated with the slot.
 177  * @detect_pin: GPIO pin used for card detection, or negative if not
 178  *      available.
 179  * @wp_pin: GPIO pin used for card write protect sending, or negative
 180  *      if not available.
 181  * @detect_is_active_high: The state of the detect pin when it is active.
 182  * @detect_timer: Timer used for debouncing @detect_pin interrupts.
 183  */
 184 struct atmel_mci_slot {
 185         struct mmc_host         *mmc;
 186         struct atmel_mci        *host;
 187
 188         u32                     sdc_reg;
 189
 190         struct mmc_request      *mrq;
 191         struct list_head        queue_node;
 192
 193         unsigned int            clock;
 194         unsigned long           flags;
 195 #define ATMCI_CARD_PRESENT      0
 196 #define ATMCI_CARD_NEED_INIT    1
 197 #define ATMCI_SHUTDOWN          2
 198
 199         int                     detect_pin;
 200         int                     wp_pin;
 201         bool                    detect_is_active_high;
 202
 203         struct timer_list       detect_timer;
 204 };
 205
 206 #define atmci_test_and_clear_pending(host, event)               \
 207         test_and_clear_bit(event, &host->pending_events)
 208 #define atmci_set_completed(host, event)                        \
 209         set_bit(event, &host->completed_events)
 210 #define atmci_set_pending(host, event)                          \
 211         set_bit(event, &host->pending_events)
 212
 213 /*
 214  * Enable or disable features/registers based on
 215  * whether the processor supports them
 216  */
 217 static bool mci_has_rwproof(void)
 218 {
 219         if (cpu_is_at91sam9261() || cpu_is_at91rm9200())
 220                 return false;
 221         else
 222                 return true;
 223 }
 224
 225 /*
 226  * The debugfs stuff below is mostly optimized away when
 227  * CONFIG_DEBUG_FS is not set.
 228  */
 229 static int atmci_req_show(struct seq_file *s, void *v)
 230 {
 231         struct atmel_mci_slot   *slot = s->private;
 232         struct mmc_request      *mrq;
 233         struct mmc_command      *cmd;
 234         struct mmc_command      *stop;
 235         struct mmc_data         *data;
 236
 237         /* Make sure we get a consistent snapshot */
 238         spin_lock_bh(&slot->host->lock);
 239         mrq = slot->mrq;
 240
 241         if (mrq) {
 242                 cmd = mrq->cmd;
 243                 data = mrq->data;
 244                 stop = mrq->stop;
 245
 246                 if (cmd)
 247                         seq_printf(s,
 248                                 "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
 249                                 cmd->opcode, cmd->arg, cmd->flags,
 250                                 cmd->resp[0], cmd->resp[1], cmd->resp[2],
 251                                 cmd->resp[2], cmd->error);
 252                 if (data)
 253                         seq_printf(s, "DATA %u / %u * %u flg %x err %d\n",
 254                                 data->bytes_xfered, data->blocks,
 255                                 data->blksz, data->flags, data->error);
 256                 if (stop)
 257                         seq_printf(s,
 258                                 "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
 259                                 stop->opcode, stop->arg, stop->flags,
 260                                 stop->resp[0], stop->resp[1], stop->resp[2],
 261                                 stop->resp[2], stop->error);
 262         }
 263
 264         spin_unlock_bh(&slot->host->lock);
 265
 266         return 0;
 267 }
 268
 269 static int atmci_req_open(struct inode *inode, struct file *file)
 270 {
 271         return single_open(file, atmci_req_show, inode->i_private);
 272 }
 273
 274 static const struct file_operations atmci_req_fops = {
 275         .owner          = THIS_MODULE,
 276         .open           = atmci_req_open,
 277         .read           = seq_read,
 278         .llseek         = seq_lseek,
 279         .release        = single_release,
 280 };
 281
 282 static void atmci_show_status_reg(struct seq_file *s,
 283                 const char *regname, u32 value)
 284 {
 285         static const char       *sr_bit[] = {
 286                 [0]     = "CMDRDY",
 287                 [1]     = "RXRDY",
 288                 [2]     = "TXRDY",
 289                 [3]     = "BLKE",
 290                 [4]     = "DTIP",
 291                 [5]     = "NOTBUSY",
 292                 [6]     = "ENDRX",
 293                 [7]     = "ENDTX",
 294                 [8]     = "SDIOIRQA",
 295                 [9]     = "SDIOIRQB",
 296                 [12]    = "SDIOWAIT",
 297                 [14]    = "RXBUFF",
 298                 [15]    = "TXBUFE",
 299                 [16]    = "RINDE",
 300                 [17]    = "RDIRE",
 301                 [18]    = "RCRCE",
 302                 [19]    = "RENDE",
 303                 [20]    = "RTOE",
 304                 [21]    = "DCRCE",
 305                 [22]    = "DTOE",
 306                 [23]    = "CSTOE",
 307                 [24]    = "BLKOVRE",
 308                 [25]    = "DMADONE",
 309                 [26]    = "FIFOEMPTY",
 310                 [27]    = "XFRDONE",
 311                 [30]    = "OVRE",
 312                 [31]    = "UNRE",
 313         };
 314         unsigned int            i;
 315
 316         seq_printf(s, "%s:\t0x%08x", regname, value);
 317         for (i = 0; i < ARRAY_SIZE(sr_bit); i++) {
 318                 if (value & (1 << i)) {
 319                         if (sr_bit[i])
 320                                 seq_printf(s, " %s", sr_bit[i]);
 321                         else
 322                                 seq_puts(s, " UNKNOWN");
 323                 }
 324         }
 325         seq_putc(s, '\n');
 326 }
 327
 328 static int atmci_regs_show(struct seq_file *s, void *v)
 329 {
 330         struct atmel_mci        *host = s->private;
 331         u32                     *buf;
 332
 333         buf = kmalloc(MCI_REGS_SIZE, GFP_KERNEL);
 334         if (!buf)
 335                 return -ENOMEM;
 336
 337         /*
 338          * Grab a more or less consistent snapshot. Note that we're
 339          * not disabling interrupts, so IMR and SR may not be
 340          * consistent.
 341          */
 342         spin_lock_bh(&host->lock);
 343         clk_enable(host->mck);
 344         memcpy_fromio(buf, host->regs, MCI_REGS_SIZE);
 345         clk_disable(host->mck);
 346         spin_unlock_bh(&host->lock);
 347
 348         seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n",
 349                         buf[MCI_MR / 4],
 350                         buf[MCI_MR / 4] & MCI_MR_RDPROOF ? " RDPROOF" : "",
 351                         buf[MCI_MR / 4] & MCI_MR_WRPROOF ? " WRPROOF" : "",
 352                         buf[MCI_MR / 4] & 0xff);
 353         seq_printf(s, "DTOR:\t0x%08x\n", buf[MCI_DTOR / 4]);
 354         seq_printf(s, "SDCR:\t0x%08x\n", buf[MCI_SDCR / 4]);
 355         seq_printf(s, "ARGR:\t0x%08x\n", buf[MCI_ARGR / 4]);
 356         seq_printf(s, "BLKR:\t0x%08x BCNT=%u BLKLEN=%u\n",
 357                         buf[MCI_BLKR / 4],
 358                         buf[MCI_BLKR / 4] & 0xffff,
 359                         (buf[MCI_BLKR / 4] >> 16) & 0xffff);
 360
 361         /* Don't read RSPR and RDR; it will consume the data there */
 362
 363         atmci_show_status_reg(s, "SR", buf[MCI_SR / 4]);
 364         atmci_show_status_reg(s, "IMR", buf[MCI_IMR / 4]);
 365
 366         kfree(buf);
 367
 368         return 0;
 369 }
 370
 371 static int atmci_regs_open(struct inode *inode, struct file *file)
 372 {
 373         return single_open(file, atmci_regs_show, inode->i_private);
 374 }
 375
 376 static const struct file_operations atmci_regs_fops = {
 377         .owner          = THIS_MODULE,
 378         .open           = atmci_regs_open,
 379         .read           = seq_read,
 380         .llseek         = seq_lseek,
 381         .release        = single_release,
 382 };
 383
 384 static void atmci_init_debugfs(struct atmel_mci_slot *slot)
 385 {
 386         struct mmc_host         *mmc = slot->mmc;
 387         struct atmel_mci        *host = slot->host;
 388         struct dentry           *root;
 389         struct dentry           *node;
 390
 391         root = mmc->debugfs_root;
 392         if (!root)
 393                 return;
 394
 395         node = debugfs_create_file("regs", S_IRUSR, root, host,
 396                         &atmci_regs_fops);
 397         if (IS_ERR(node))
 398                 return;
 399         if (!node)
 400                 goto err;
 401
 402         node = debugfs_create_file("req", S_IRUSR, root, slot, &atmci_req_fops);
 403         if (!node)
 404                 goto err;
 405
 406         node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state);
 407         if (!node)
 408                 goto err;
 409
 410         node = debugfs_create_x32("pending_events", S_IRUSR, root,
 411                                      (u32 *)&host->pending_events);
 412         if (!node)
 413                 goto err;
 414
 415         node = debugfs_create_x32("completed_events", S_IRUSR, root,
 416                                      (u32 *)&host->completed_events);
 417         if (!node)
 418                 goto err;
 419
 420         return;
 421
 422 err:
 423         dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n");
 424 }
 425
 426 static inline unsigned int ns_to_clocks(struct atmel_mci *host,
 427                                         unsigned int ns)
 428 {
 429         return (ns * (host->bus_hz / 1000000) + 999) / 1000;
 430 }
 431
 432 static void atmci_set_timeout(struct atmel_mci *host,
 433                 struct atmel_mci_slot *slot, struct mmc_data *data)
 434 {
 435         static unsigned dtomul_to_shift[] = {
 436                 0, 4, 7, 8, 10, 12, 16, 20
 437         };
 438         unsigned        timeout;
 439         unsigned        dtocyc;
 440         unsigned        dtomul;
 441
 442         timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
 443
 444         for (dtomul = 0; dtomul < 8; dtomul++) {
 445                 unsigned shift = dtomul_to_shift[dtomul];
 446                 dtocyc = (timeout + (1 << shift) - 1) >> shift;
 447                 if (dtocyc < 15)
 448                         break;
 449         }
 450
 451         if (dtomul >= 8) {
 452                 dtomul = 7;
 453                 dtocyc = 15;
 454         }
 455
 456         dev_vdbg(&slot->mmc->class_dev, "setting timeout to %u cycles\n",
 457                         dtocyc << dtomul_to_shift[dtomul]);
 458         mci_writel(host, DTOR, (MCI_DTOMUL(dtomul) | MCI_DTOCYC(dtocyc)));
 459 }
 460
 461 /*
 462  * Return mask with command flags to be enabled for this command.
 463  */
 464 static u32 atmci_prepare_command(struct mmc_host *mmc,
 465                                  struct mmc_command *cmd)
 466 {
 467         struct mmc_data *data;
 468         u32             cmdr;
 469
 470         cmd->error = -EINPROGRESS;
 471
 472         cmdr = MCI_CMDR_CMDNB(cmd->opcode);
 473
 474         if (cmd->flags & MMC_RSP_PRESENT) {
 475                 if (cmd->flags & MMC_RSP_136)
 476                         cmdr |= MCI_CMDR_RSPTYP_136BIT;
 477                 else
 478                         cmdr |= MCI_CMDR_RSPTYP_48BIT;
 479         }
 480
 481         /*
 482          * This should really be MAXLAT_5 for CMD2 and ACMD41, but
 483          * it's too difficult to determine whether this is an ACMD or
 484          * not. Better make it 64.
 485          */
 486         cmdr |= MCI_CMDR_MAXLAT_64CYC;
 487
 488         if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
 489                 cmdr |= MCI_CMDR_OPDCMD;
 490
 491         data = cmd->data;
 492         if (data) {
 493                 cmdr |= MCI_CMDR_START_XFER;
 494                 if (data->flags & MMC_DATA_STREAM)
 495                         cmdr |= MCI_CMDR_STREAM;
 496                 else if (data->blocks > 1)
 497                         cmdr |= MCI_CMDR_MULTI_BLOCK;
 498                 else
 499                         cmdr |= MCI_CMDR_BLOCK;
 500
 501                 if (data->flags & MMC_DATA_READ)
 502                         cmdr |= MCI_CMDR_TRDIR_READ;
 503         }
 504
 505         return cmdr;
 506 }
 507
 508 static void atmci_start_command(struct atmel_mci *host,
 509                 struct mmc_command *cmd, u32 cmd_flags)
 510 {
 511         WARN_ON(host->cmd);
 512         host->cmd = cmd;
 513
 514         dev_vdbg(&host->pdev->dev,
 515                         "start command: ARGR=0x%08x CMDR=0x%08x\n",
 516                         cmd->arg, cmd_flags);
 517
 518         mci_writel(host, ARGR, cmd->arg);
 519         mci_writel(host, CMDR, cmd_flags);
 520 }
 521
 522 static void send_stop_cmd(struct atmel_mci *host, struct mmc_data *data)
 523 {
 524         atmci_start_command(host, data->stop, host->stop_cmdr);
 525         mci_writel(host, IER, MCI_CMDRDY);
 526 }
 527
 528 #ifdef CONFIG_MMC_ATMELMCI_DMA
 529 static void atmci_dma_cleanup(struct atmel_mci *host)
 530 {
 531         struct mmc_data                 *data = host->data;
 532
 533         dma_unmap_sg(&host->pdev->dev, data->sg, data->sg_len,
 534                      ((data->flags & MMC_DATA_WRITE)
 535                       ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
 536 }
 537
 538 static void atmci_stop_dma(struct atmel_mci *host)
 539 {
 540         struct dma_chan *chan = host->data_chan;
 541
 542         if (chan) {
 543                 chan->device->device_terminate_all(chan);
 544                 atmci_dma_cleanup(host);
 545         } else {
 546                 /* Data transfer was stopped by the interrupt handler */
 547                 atmci_set_pending(host, EVENT_XFER_COMPLETE);
 548                 mci_writel(host, IER, MCI_NOTBUSY);
 549         }
 550 }
 551
 552 /* This function is called by the DMA driver from tasklet context. */
 553 static void atmci_dma_complete(void *arg)
 554 {
 555         struct atmel_mci        *host = arg;
 556         struct mmc_data         *data = host->data;
 557
 558         dev_vdbg(&host->pdev->dev, "DMA complete\n");
 559
 560         atmci_dma_cleanup(host);
 561
 562         /*
 563          * If the card was removed, data will be NULL. No point trying
 564          * to send the stop command or waiting for NBUSY in this case.
 565          */
 566         if (data) {
 567                 atmci_set_pending(host, EVENT_XFER_COMPLETE);
 568                 tasklet_schedule(&host->tasklet);
 569
 570                 /*
 571                  * Regardless of what the documentation says, we have
 572                  * to wait for NOTBUSY even after block read
 573                  * operations.
 574                  *
 575                  * When the DMA transfer is complete, the controller
 576                  * may still be reading the CRC from the card, i.e.
 577                  * the data transfer is still in progress and we
 578                  * haven't seen all the potential error bits yet.
 579                  *
 580                  * The interrupt handler will schedule a different
 581                  * tasklet to finish things up when the data transfer
 582                  * is completely done.
 583                  *
 584                  * We may not complete the mmc request here anyway
 585                  * because the mmc layer may call back and cause us to
 586                  * violate the "don't submit new operations from the
 587                  * completion callback" rule of the dma engine
 588                  * framework.
 589                  */
 590                 mci_writel(host, IER, MCI_NOTBUSY);
 591         }
 592 }
 593
 594 static int
 595 atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data)
 596 {
 597         struct dma_chan                 *chan;
 598         struct dma_async_tx_descriptor  *desc;
 599         struct scatterlist              *sg;
 600         unsigned int                    i;
 601         enum dma_data_direction         direction;
 602         unsigned int                    sglen;
 603
 604         /*
 605          * We don't do DMA on "complex" transfers, i.e. with
 606          * non-word-aligned buffers or lengths. Also, we don't bother
 607          * with all the DMA setup overhead for short transfers.
 608          */
 609         if (data->blocks * data->blksz < ATMCI_DMA_THRESHOLD)
 610                 return -EINVAL;
 611         if (data->blksz & 3)
 612                 return -EINVAL;
 613
 614         for_each_sg(data->sg, sg, data->sg_len, i) {
 615                 if (sg->offset & 3 || sg->length & 3)
 616                         return -EINVAL;
 617         }
 618
 619         /* If we don't have a channel, we can't do DMA */
 620         chan = host->dma.chan;
 621         if (chan)
 622                 host->data_chan = chan;
 623
 624         if (!chan)
 625                 return -ENODEV;
 626
 627         if (data->flags & MMC_DATA_READ)
 628                 direction = DMA_FROM_DEVICE;
 629         else
 630                 direction = DMA_TO_DEVICE;
 631
 632         sglen = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len, direction);
 633         if (sglen != data->sg_len)
 634                 goto unmap_exit;
 635         desc = chan->device->device_prep_slave_sg(chan,
 636                         data->sg, data->sg_len, direction,
 637                         DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 638         if (!desc)
 639                 goto unmap_exit;
 640
 641         host->dma.data_desc = desc;
 642         desc->callback = atmci_dma_complete;
 643         desc->callback_param = host;
 644         desc->tx_submit(desc);
 645
 646         /* Go! */
 647         chan->device->device_issue_pending(chan);
 648
 649         return 0;
 650 unmap_exit:
 651         dma_unmap_sg(&host->pdev->dev, data->sg, sglen, direction);
 652         return -ENOMEM;
 653 }
 654
 655 #else /* CONFIG_MMC_ATMELMCI_DMA */
 656
 657 static int atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data)
 658 {
 659         return -ENOSYS;
 660 }
 661
 662 static void atmci_stop_dma(struct atmel_mci *host)
 663 {
 664         /* Data transfer was stopped by the interrupt handler */
 665         atmci_set_pending(host, EVENT_XFER_COMPLETE);
 666         mci_writel(host, IER, MCI_NOTBUSY);
 667 }
 668
 669 #endif /* CONFIG_MMC_ATMELMCI_DMA */
 670
 671 /*
 672  * Returns a mask of interrupt flags to be enabled after the whole
 673  * request has been prepared.
 674  */
 675 static u32 atmci_submit_data(struct atmel_mci *host, struct mmc_data *data)
 676 {
 677         u32 iflags;
 678
 679         data->error = -EINPROGRESS;
 680
 681         WARN_ON(host->data);
 682         host->sg = NULL;
 683         host->data = data;
 684
 685         iflags = ATMCI_DATA_ERROR_FLAGS;
 686         if (atmci_submit_data_dma(host, data)) {
 687                 host->data_chan = NULL;
 688
 689                 /*
 690                  * Errata: MMC data write operation with less than 12
 691                  * bytes is impossible.
 692                  *
 693                  * Errata: MCI Transmit Data Register (TDR) FIFO
 694                  * corruption when length is not multiple of 4.
 695                  */
 696                 if (data->blocks * data->blksz < 12
 697                                 || (data->blocks * data->blksz) & 3)
 698                         host->need_reset = true;
 699
 700                 host->sg = data->sg;
 701                 host->pio_offset = 0;
 702                 if (data->flags & MMC_DATA_READ)
 703                         iflags |= MCI_RXRDY;
 704                 else
 705                         iflags |= MCI_TXRDY;
 706         }
 707
 708         return iflags;
 709 }
 710
 711 static void atmci_start_request(struct atmel_mci *host,
 712                 struct atmel_mci_slot *slot)
 713 {
 714         struct mmc_request      *mrq;
 715         struct mmc_command      *cmd;
 716         struct mmc_data         *data;
 717         u32                     iflags;
 718         u32                     cmdflags;
 719
 720         mrq = slot->mrq;
 721         host->cur_slot = slot;
 722         host->mrq = mrq;
 723
 724         host->pending_events = 0;
 725         host->completed_events = 0;
 726         host->data_status = 0;
 727
 728         if (host->need_reset) {
 729                 mci_writel(host, CR, MCI_CR_SWRST);
 730                 mci_writel(host, CR, MCI_CR_MCIEN);
 731                 mci_writel(host, MR, host->mode_reg);
 732                 host->need_reset = false;
 733         }
 734         mci_writel(host, SDCR, slot->sdc_reg);
 735
 736         iflags = mci_readl(host, IMR);
 737         if (iflags)
 738                 dev_warn(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n",
 739                                 iflags);
 740
 741         if (unlikely(test_and_clear_bit(ATMCI_CARD_NEED_INIT, &slot->flags))) {
 742                 /* Send init sequence (74 clock cycles) */
 743                 mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT);
 744                 while (!(mci_readl(host, SR) & MCI_CMDRDY))
 745                         cpu_relax();
 746         }
 747         data = mrq->data;
 748         if (data) {
 749                 atmci_set_timeout(host, slot, data);
 750
 751                 /* Must set block count/size before sending command */
 752                 mci_writel(host, BLKR, MCI_BCNT(data->blocks)
 753                                 | MCI_BLKLEN(data->blksz));
 754                 dev_vdbg(&slot->mmc->class_dev, "BLKR=0x%08x\n",
 755                         MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz));
 756         }
 757
 758         iflags = MCI_CMDRDY;
 759         cmd = mrq->cmd;
 760         cmdflags = atmci_prepare_command(slot->mmc, cmd);
 761         atmci_start_command(host, cmd, cmdflags);
 762
 763         if (data)
 764                 iflags |= atmci_submit_data(host, data);
 765
 766         if (mrq->stop) {
 767                 host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop);
 768                 host->stop_cmdr |= MCI_CMDR_STOP_XFER;
 769                 if (!(data->flags & MMC_DATA_WRITE))
 770                         host->stop_cmdr |= MCI_CMDR_TRDIR_READ;
 771                 if (data->flags & MMC_DATA_STREAM)
 772                         host->stop_cmdr |= MCI_CMDR_STREAM;
 773                 else
 774                         host->stop_cmdr |= MCI_CMDR_MULTI_BLOCK;
 775         }
 776
 777         /*
 778          * We could have enabled interrupts earlier, but I suspect
 779          * that would open up a nice can of interesting race
 780          * conditions (e.g. command and data complete, but stop not
 781          * prepared yet.)
 782          */
 783         mci_writel(host, IER, iflags);
 784 }
 785
 786 static void atmci_queue_request(struct atmel_mci *host,
 787                 struct atmel_mci_slot *slot, struct mmc_request *mrq)
 788 {
 789         dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n",
 790                         host->state);
 791
 792         spin_lock_bh(&host->lock);
 793         slot->mrq = mrq;
 794         if (host->state == STATE_IDLE) {
 795                 host->state = STATE_SENDING_CMD;
 796                 atmci_start_request(host, slot);
 797         } else {
 798                 list_add_tail(&slot->queue_node, &host->queue);
 799         }
 800         spin_unlock_bh(&host->lock);
 801 }
 802
 803 static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 804 {
 805         struct atmel_mci_slot   *slot = mmc_priv(mmc);
 806         struct atmel_mci        *host = slot->host;
 807         struct mmc_data         *data;
 808
 809         WARN_ON(slot->mrq);
 810
 811         /*
 812          * We may "know" the card is gone even though there's still an
 813          * electrical connection. If so, we really need to communicate
 814          * this to the MMC core since there won't be any more
 815          * interrupts as the card is completely removed. Otherwise,
 816          * the MMC core might believe the card is still there even
 817          * though the card was just removed very slowly.
 818          */
 819         if (!test_bit(ATMCI_CARD_PRESENT, &slot->flags)) {
 820                 mrq->cmd->error = -ENOMEDIUM;
 821                 mmc_request_done(mmc, mrq);
 822                 return;
 823         }
 824
 825         /* We don't support multiple blocks of weird lengths. */
 826         data = mrq->data;
 827         if (data && data->blocks > 1 && data->blksz & 3) {
 828                 mrq->cmd->error = -EINVAL;
 829                 mmc_request_done(mmc, mrq);
 830         }
 831
 832         atmci_queue_request(host, slot, mrq);
 833 }
 834
 835 static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 836 {
 837         struct atmel_mci_slot   *slot = mmc_priv(mmc);
 838         struct atmel_mci        *host = slot->host;
 839         unsigned int            i;
 840
 841         slot->sdc_reg &= ~MCI_SDCBUS_MASK;
 842         switch (ios->bus_width) {
 843         case MMC_BUS_WIDTH_1:
 844                 slot->sdc_reg |= MCI_SDCBUS_1BIT;
 845                 break;
 846         case MMC_BUS_WIDTH_4:
 847                 slot->sdc_reg |= MCI_SDCBUS_4BIT;
 848                 break;
 849         }
 850
 851         if (ios->clock) {
 852                 unsigned int clock_min = ~0U;
 853                 u32 clkdiv;
 854
 855                 spin_lock_bh(&host->lock);
 856                 if (!host->mode_reg) {
 857                         clk_enable(host->mck);
 858                         mci_writel(host, CR, MCI_CR_SWRST);
 859                         mci_writel(host, CR, MCI_CR_MCIEN);
 860                 }
 861
 862                 /*
 863                  * Use mirror of ios->clock to prevent race with mmc
 864                  * core ios update when finding the minimum.
 865                  */
 866                 slot->clock = ios->clock;
 867                 for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
 868                         if (host->slot[i] && host->slot[i]->clock
 869                                         && host->slot[i]->clock < clock_min)
 870                                 clock_min = host->slot[i]->clock;
 871                 }
 872
 873                 /* Calculate clock divider */
 874                 clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1;
 875                 if (clkdiv > 255) {
 876                         dev_warn(&mmc->class_dev,
 877                                 "clock %u too slow; using %lu\n",
 878                                 clock_min, host->bus_hz / (2 * 256));
 879                         clkdiv = 255;
 880                 }
 881
 882                 host->mode_reg = MCI_MR_CLKDIV(clkdiv);
 883
 884                 /*
 885                  * WRPROOF and RDPROOF prevent overruns/underruns by
 886                  * stopping the clock when the FIFO is full/empty.
 887                  * This state is not expected to last for long.
 888                  */
 889                 if (mci_has_rwproof())
 890                         host->mode_reg |= (MCI_MR_WRPROOF | MCI_MR_RDPROOF);
 891
 892                 if (list_empty(&host->queue))
 893                         mci_writel(host, MR, host->mode_reg);
 894                 else
 895                         host->need_clock_update = true;
 896
 897                 spin_unlock_bh(&host->lock);
 898         } else {
 899                 bool any_slot_active = false;
 900
 901                 spin_lock_bh(&host->lock);
 902                 slot->clock = 0;
 903                 for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
 904                         if (host->slot[i] && host->slot[i]->clock) {
 905                                 any_slot_active = true;
 906                                 break;
 907                         }
 908                 }
 909                 if (!any_slot_active) {
 910                         mci_writel(host, CR, MCI_CR_MCIDIS);
 911                         if (host->mode_reg) {
 912                                 mci_readl(host, MR);
 913                                 clk_disable(host->mck);
 914                         }
 915                         host->mode_reg = 0;
 916                 }
 917                 spin_unlock_bh(&host->lock);
 918         }
 919
 920         switch (ios->power_mode) {
 921         case MMC_POWER_UP:
 922                 set_bit(ATMCI_CARD_NEED_INIT, &slot->flags);
 923                 break;
 924         default:
 925                 /*
 926                  * TODO: None of the currently available AVR32-based
 927                  * boards allow MMC power to be turned off. Implement
 928                  * power control when this can be tested properly.
 929                  *
 930                  * We also need to hook this into the clock management
 931                  * somehow so that newly inserted cards aren't
 932                  * subjected to a fast clock before we have a chance
 933                  * to figure out what the maximum rate is. Currently,
 934                  * there's no way to avoid this, and there never will
 935                  * be for boards that don't support power control.
 936                  */
 937                 break;
 938         }
 939 }
 940
 941 static int atmci_get_ro(struct mmc_host *mmc)
 942 {
 943         int                     read_only = -ENOSYS;
 944         struct atmel_mci_slot   *slot = mmc_priv(mmc);
 945
 946         if (gpio_is_valid(slot->wp_pin)) {
 947                 read_only = gpio_get_value(slot->wp_pin);
 948                 dev_dbg(&mmc->class_dev, "card is %s\n",
 949                                 read_only ? "read-only" : "read-write");
 950         }
 951
 952         return read_only;
 953 }
 954
 955 static int atmci_get_cd(struct mmc_host *mmc)
 956 {
 957         int                     present = -ENOSYS;
 958         struct atmel_mci_slot   *slot = mmc_priv(mmc);
 959
 960         if (gpio_is_valid(slot->detect_pin)) {
 961                 present = !(gpio_get_value(slot->detect_pin) ^
 962                             slot->detect_is_active_high);
 963                 dev_dbg(&mmc->class_dev, "card is %spresent\n",
 964                                 present ? "" : "not ");
 965         }
 966
 967         return present;
 968 }
 969
 970 static const struct mmc_host_ops atmci_ops = {
 971         .request        = atmci_request,
 972         .set_ios        = atmci_set_ios,
 973         .get_ro         = atmci_get_ro,
 974         .get_cd         = atmci_get_cd,
 975 };
 976
 977 /* Called with host->lock held */
 978 static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq)
 979         __releases(&host->lock)
 980         __acquires(&host->lock)
 981 {
 982         struct atmel_mci_slot   *slot = NULL;
 983         struct mmc_host         *prev_mmc = host->cur_slot->mmc;
 984
 985         WARN_ON(host->cmd || host->data);
 986
 987         /*
 988          * Update the MMC clock rate if necessary. This may be
 989          * necessary if set_ios() is called when a different slot is
 990          * busy transfering data.
 991          */
 992         if (host->need_clock_update)
 993                 mci_writel(host, MR, host->mode_reg);
 994
 995         host->cur_slot->mrq = NULL;
 996         host->mrq = NULL;
 997         if (!list_empty(&host->queue)) {
 998                 slot = list_entry(host->queue.next,
 999                                 struct atmel_mci_slot, queue_node);
1000                 list_del(&slot->queue_node);
1001                 dev_vdbg(&host->pdev->dev, "list not empty: %s is next\n",
1002                                 mmc_hostname(slot->mmc));
1003                 host->state = STATE_SENDING_CMD;
1004                 atmci_start_request(host, slot);
1005         } else {
1006                 dev_vdbg(&host->pdev->dev, "list empty\n");
1007                 host->state = STATE_IDLE;
1008         }
1009
1010         spin_unlock(&host->lock);
1011         mmc_request_done(prev_mmc, mrq);
1012         spin_lock(&host->lock);
1013 }
1014
1015 static void atmci_command_complete(struct atmel_mci *host,
1016                         struct mmc_command *cmd)
1017 {
1018         u32             status = host->cmd_status;
1019
1020         /* Read the response from the card (up to 16 bytes) */
1021         cmd->resp[0] = mci_readl(host, RSPR);
1022         cmd->resp[1] = mci_readl(host, RSPR);
1023         cmd->resp[2] = mci_readl(host, RSPR);
1024         cmd->resp[3] = mci_readl(host, RSPR);
1025
1026         if (status & MCI_RTOE)
1027                 cmd->error = -ETIMEDOUT;
1028         else if ((cmd->flags & MMC_RSP_CRC) && (status & MCI_RCRCE))
1029                 cmd->error = -EILSEQ;
1030         else if (status & (MCI_RINDE | MCI_RDIRE | MCI_RENDE))
1031                 cmd->error = -EIO;
1032         else
1033                 cmd->error = 0;
1034
1035         if (cmd->error) {
1036                 dev_dbg(&host->pdev->dev,
1037                         "command error: status=0x%08x\n", status);
1038
1039                 if (cmd->data) {
1040                         host->data = NULL;
1041                         atmci_stop_dma(host);
1042                         mci_writel(host, IDR, MCI_NOTBUSY
1043                                         | MCI_TXRDY | MCI_RXRDY
1044                                         | ATMCI_DATA_ERROR_FLAGS);
1045                 }
1046         }
1047 }
1048
1049 static void atmci_detect_change(unsigned long data)
1050 {
1051         struct atmel_mci_slot   *slot = (struct atmel_mci_slot *)data;
1052         bool                    present;
1053         bool                    present_old;
1054
1055         /*
1056          * atmci_cleanup_slot() sets the ATMCI_SHUTDOWN flag before
1057          * freeing the interrupt. We must not re-enable the interrupt
1058          * if it has been freed, and if we're shutting down, it
1059          * doesn't really matter whether the card is present or not.
1060          */
1061         smp_rmb();
1062         if (test_bit(ATMCI_SHUTDOWN, &slot->flags))
1063                 return;
1064
1065         enable_irq(gpio_to_irq(slot->detect_pin));
1066         present = !(gpio_get_value(slot->detect_pin) ^
1067                     slot->detect_is_active_high);
1068         present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags);
1069
1070         dev_vdbg(&slot->mmc->class_dev, "detect change: %d (was %d)\n",
1071                         present, present_old);
1072
1073         if (present != present_old) {
1074                 struct atmel_mci        *host = slot->host;
1075                 struct mmc_request      *mrq;
1076
1077                 dev_dbg(&slot->mmc->class_dev, "card %s\n",
1078                         present ? "inserted" : "removed");
1079
1080                 spin_lock(&host->lock);
1081
1082                 if (!present)
1083                         clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
1084                 else
1085                         set_bit(ATMCI_CARD_PRESENT, &slot->flags);
1086
1087                 /* Clean up queue if present */
1088                 mrq = slot->mrq;
1089                 if (mrq) {
1090                         if (mrq == host->mrq) {
1091                                 /*
1092                                  * Reset controller to terminate any ongoing
1093                                  * commands or data transfers.
1094                                  */
1095                                 mci_writel(host, CR, MCI_CR_SWRST);
1096                                 mci_writel(host, CR, MCI_CR_MCIEN);
1097                                 mci_writel(host, MR, host->mode_reg);
1098
1099                                 host->data = NULL;
1100                                 host->cmd = NULL;
1101
1102                                 switch (host->state) {
1103                                 case STATE_IDLE:
1104                                         break;
1105                                 case STATE_SENDING_CMD:
1106                                         mrq->cmd->error = -ENOMEDIUM;
1107                                         if (!mrq->data)
1108                                                 break;
1109                                         /* fall through */
1110                                 case STATE_SENDING_DATA:
1111                                         mrq->data->error = -ENOMEDIUM;
1112                                         atmci_stop_dma(host);
1113                                         break;
1114                                 case STATE_DATA_BUSY:
1115                                 case STATE_DATA_ERROR:
1116                                         if (mrq->data->error == -EINPROGRESS)
1117                                                 mrq->data->error = -ENOMEDIUM;
1118                                         if (!mrq->stop)
1119                                                 break;
1120                                         /* fall through */
1121                                 case STATE_SENDING_STOP:
1122                                         mrq->stop->error = -ENOMEDIUM;
1123                                         break;
1124                                 }
1125
1126                                 atmci_request_end(host, mrq);
1127                         } else {
1128                                 list_del(&slot->queue_node);
1129                                 mrq->cmd->error = -ENOMEDIUM;
1130                                 if (mrq->data)
1131                                         mrq->data->error = -ENOMEDIUM;
1132                                 if (mrq->stop)
1133                                         mrq->stop->error = -ENOMEDIUM;
1134
1135                                 spin_unlock(&host->lock);
1136                                 mmc_request_done(slot->mmc, mrq);
1137                                 spin_lock(&host->lock);
1138                         }
1139                 }
1140                 spin_unlock(&host->lock);
1141
1142                 mmc_detect_change(slot->mmc, 0);
1143         }
1144 }
1145
1146 static void atmci_tasklet_func(unsigned long priv)
1147 {
1148         struct atmel_mci        *host = (struct atmel_mci *)priv;
1149         struct mmc_request      *mrq = host->mrq;
1150         struct mmc_data         *data = host->data;
1151         struct mmc_command      *cmd = host->cmd;
1152         enum atmel_mci_state    state = host->state;
1153         enum atmel_mci_state    prev_state;
1154         u32                     status;
1155
1156         spin_lock(&host->lock);
1157
1158         state = host->state;
1159
1160         dev_vdbg(&host->pdev->dev,
1161                 "tasklet: state %u pending/completed/mask %lx/%lx/%x\n",
1162                 state, host->pending_events, host->completed_events,
1163                 mci_readl(host, IMR));
1164
1165         do {
1166                 prev_state = state;
1167
1168                 switch (state) {
1169                 case STATE_IDLE:
1170                         break;
1171
1172                 case STATE_SENDING_CMD:
1173                         if (!atmci_test_and_clear_pending(host,
1174                                                 EVENT_CMD_COMPLETE))
1175                                 break;
1176
1177                         host->cmd = NULL;
1178                         atmci_set_completed(host, EVENT_CMD_COMPLETE);
1179                         atmci_command_complete(host, mrq->cmd);
1180                         if (!mrq->data || cmd->error) {
1181                                 atmci_request_end(host, host->mrq);
1182                                 goto unlock;
1183                         }
1184
1185                         prev_state = state = STATE_SENDING_DATA;
1186                         /* fall through */
1187
1188                 case STATE_SENDING_DATA:
1189                         if (atmci_test_and_clear_pending(host,
1190                                                 EVENT_DATA_ERROR)) {
1191                                 atmci_stop_dma(host);
1192                                 if (data->stop)
1193                                         send_stop_cmd(host, data);
1194                                 state = STATE_DATA_ERROR;
1195                                 break;
1196                         }
1197
1198                         if (!atmci_test_and_clear_pending(host,
1199                                                 EVENT_XFER_COMPLETE))
1200                                 break;
1201
1202                         atmci_set_completed(host, EVENT_XFER_COMPLETE);
1203                         prev_state = state = STATE_DATA_BUSY;
1204                         /* fall through */
1205
1206                 case STATE_DATA_BUSY:
1207                         if (!atmci_test_and_clear_pending(host,
1208                                                 EVENT_DATA_COMPLETE))
1209                                 break;
1210
1211                         host->data = NULL;
1212                         atmci_set_completed(host, EVENT_DATA_COMPLETE);
1213                         status = host->data_status;
1214                         if (unlikely(status & ATMCI_DATA_ERROR_FLAGS)) {
1215                                 if (status & MCI_DTOE) {
1216                                         dev_dbg(&host->pdev->dev,
1217                                                         "data timeout error\n");
1218                                         data->error = -ETIMEDOUT;
1219                                 } else if (status & MCI_DCRCE) {
1220                                         dev_dbg(&host->pdev->dev,
1221                                                         "data CRC error\n");
1222                                         data->error = -EILSEQ;
1223                                 } else {
1224                                         dev_dbg(&host->pdev->dev,
1225                                                 "data FIFO error (status=%08x)\n",
1226                                                 status);
1227                                         data->error = -EIO;
1228                                 }
1229                         } else {
1230                                 data->bytes_xfered = data->blocks * data->blksz;
1231                                 data->error = 0;
1232                         }
1233
1234                         if (!data->stop) {
1235                                 atmci_request_end(host, host->mrq);
1236                                 goto unlock;
1237                         }
1238
1239                         prev_state = state = STATE_SENDING_STOP;
1240                         if (!data->error)
1241                                 send_stop_cmd(host, data);
1242                         /* fall through */
1243
1244                 case STATE_SENDING_STOP:
1245                         if (!atmci_test_and_clear_pending(host,
1246                                                 EVENT_CMD_COMPLETE))
1247                                 break;
1248
1249                         host->cmd = NULL;
1250                         atmci_command_complete(host, mrq->stop);
1251                         atmci_request_end(host, host->mrq);
1252                         goto unlock;
1253
1254                 case STATE_DATA_ERROR:
1255                         if (!atmci_test_and_clear_pending(host,
1256                                                 EVENT_XFER_COMPLETE))
1257                                 break;
1258
1259                         state = STATE_DATA_BUSY;
1260                         break;
1261                 }
1262         } while (state != prev_state);
1263
1264         host->state = state;
1265
1266 unlock:
1267         spin_unlock(&host->lock);
1268 }
1269
1270 static void atmci_read_data_pio(struct atmel_mci *host)
1271 {
1272         struct scatterlist      *sg = host->sg;
1273         void                    *buf = sg_virt(sg);
1274         unsigned int            offset = host->pio_offset;
1275         struct mmc_data         *data = host->data;
1276         u32                     value;
1277         u32                     status;
1278         unsigned int            nbytes = 0;
1279
1280         do {
1281                 value = mci_readl(host, RDR);
1282                 if (likely(offset + 4 <= sg->length)) {
1283                         put_unaligned(value, (u32 *)(buf + offset));
1284
1285                         offset += 4;
1286                         nbytes += 4;
1287
1288                         if (offset == sg->length) {
1289                                 flush_dcache_page(sg_page(sg));
1290                                 host->sg = sg = sg_next(sg);
1291                                 if (!sg)
1292                                         goto done;
1293
1294                                 offset = 0;
1295                                 buf = sg_virt(sg);
1296                         }
1297                 } else {
1298                         unsigned int remaining = sg->length - offset;
1299                         memcpy(buf + offset, &value, remaining);
1300                         nbytes += remaining;
1301
1302                         flush_dcache_page(sg_page(sg));
1303                         host->sg = sg = sg_next(sg);
1304                         if (!sg)
1305                                 goto done;
1306
1307                         offset = 4 - remaining;
1308                         buf = sg_virt(sg);
1309                         memcpy(buf, (u8 *)&value + remaining, offset);
1310                         nbytes += offset;
1311                 }
1312
1313                 status = mci_readl(host, SR);
1314                 if (status & ATMCI_DATA_ERROR_FLAGS) {
1315                         mci_writel(host, IDR, (MCI_NOTBUSY | MCI_RXRDY
1316                                                 | ATMCI_DATA_ERROR_FLAGS));
1317                         host->data_status = status;
1318                         data->bytes_xfered += nbytes;
1319                         smp_wmb();
1320                         atmci_set_pending(host, EVENT_DATA_ERROR);
1321                         tasklet_schedule(&host->tasklet);
1322                         return;
1323                 }
1324         } while (status & MCI_RXRDY);
1325
1326         host->pio_offset = offset;
1327         data->bytes_xfered += nbytes;
1328
1329         return;
1330
1331 done:
1332         mci_writel(host, IDR, MCI_RXRDY);
1333         mci_writel(host, IER, MCI_NOTBUSY);
1334         data->bytes_xfered += nbytes;
1335         smp_wmb();
1336         atmci_set_pending(host, EVENT_XFER_COMPLETE);
1337 }
1338
1339 static void atmci_write_data_pio(struct atmel_mci *host)
1340 {
1341         struct scatterlist      *sg = host->sg;
1342         void                    *buf = sg_virt(sg);
1343         unsigned int            offset = host->pio_offset;
1344         struct mmc_data         *data = host->data;
1345         u32                     value;
1346         u32                     status;
1347         unsigned int            nbytes = 0;
1348
1349         do {
1350                 if (likely(offset + 4 <= sg->length)) {
1351                         value = get_unaligned((u32 *)(buf + offset));
1352                         mci_writel(host, TDR, value);
1353
1354                         offset += 4;
1355                         nbytes += 4;
1356                         if (offset == sg->length) {
1357                                 host->sg = sg = sg_next(sg);
1358                                 if (!sg)
1359                                         goto done;
1360
1361                                 offset = 0;
1362                                 buf = sg_virt(sg);
1363                         }
1364                 } else {
1365                         unsigned int remaining = sg->length - offset;
1366
1367                         value = 0;
1368                         memcpy(&value, buf + offset, remaining);
1369                         nbytes += remaining;
1370
1371                         host->sg = sg = sg_next(sg);
1372                         if (!sg) {
1373                                 mci_writel(host, TDR, value);
1374                                 goto done;
1375                         }
1376
1377                         offset = 4 - remaining;
1378                         buf = sg_virt(sg);
1379                         memcpy((u8 *)&value + remaining, buf, offset);
1380                         mci_writel(host, TDR, value);
1381                         nbytes += offset;
1382                 }
1383
1384                 status = mci_readl(host, SR);
1385                 if (status & ATMCI_DATA_ERROR_FLAGS) {
1386                         mci_writel(host, IDR, (MCI_NOTBUSY | MCI_TXRDY
1387                                                 | ATMCI_DATA_ERROR_FLAGS));
1388                         host->data_status = status;
1389                         data->bytes_xfered += nbytes;
1390                         smp_wmb();
1391                         atmci_set_pending(host, EVENT_DATA_ERROR);
1392                         tasklet_schedule(&host->tasklet);
1393                         return;
1394                 }
1395         } while (status & MCI_TXRDY);
1396
1397         host->pio_offset = offset;
1398         data->bytes_xfered += nbytes;
1399
1400         return;
1401
1402 done:
1403         mci_writel(host, IDR, MCI_TXRDY);
1404         mci_writel(host, IER, MCI_NOTBUSY);
1405         data->bytes_xfered += nbytes;
1406         smp_wmb();
1407         atmci_set_pending(host, EVENT_XFER_COMPLETE);
1408 }
1409
1410 static void atmci_cmd_interrupt(struct atmel_mci *host, u32 status)
1411 {
1412         mci_writel(host, IDR, MCI_CMDRDY);
1413
1414         host->cmd_status = status;
1415         smp_wmb();
1416         atmci_set_pending(host, EVENT_CMD_COMPLETE);
1417         tasklet_schedule(&host->tasklet);
1418 }
1419
1420 static irqreturn_t atmci_interrupt(int irq, void *dev_id)
1421 {
1422         struct atmel_mci        *host = dev_id;
1423         u32                     status, mask, pending;
1424         unsigned int            pass_count = 0;
1425
1426         do {
1427                 status = mci_readl(host, SR);
1428                 mask = mci_readl(host, IMR);
1429                 pending = status & mask;
1430                 if (!pending)
1431                         break;
1432
1433                 if (pending & ATMCI_DATA_ERROR_FLAGS) {
1434                         mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS
1435                                         | MCI_RXRDY | MCI_TXRDY);
1436                         pending &= mci_readl(host, IMR);
1437
1438                         host->data_status = status;
1439                         smp_wmb();
1440                         atmci_set_pending(host, EVENT_DATA_ERROR);
1441                         tasklet_schedule(&host->tasklet);
1442                 }
1443                 if (pending & MCI_NOTBUSY) {
1444                         mci_writel(host, IDR,
1445                                         ATMCI_DATA_ERROR_FLAGS | MCI_NOTBUSY);
1446                         if (!host->data_status)
1447                                 host->data_status = status;
1448                         smp_wmb();
1449                         atmci_set_pending(host, EVENT_DATA_COMPLETE);
1450                         tasklet_schedule(&host->tasklet);
1451                 }
1452                 if (pending & MCI_RXRDY)
1453                         atmci_read_data_pio(host);
1454                 if (pending & MCI_TXRDY)
1455                         atmci_write_data_pio(host);
1456
1457                 if (pending & MCI_CMDRDY)
1458                         atmci_cmd_interrupt(host, status);
1459         } while (pass_count++ < 5);
1460
1461         return pass_count ? IRQ_HANDLED : IRQ_NONE;
1462 }
1463
1464 static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
1465 {
1466         struct atmel_mci_slot   *slot = dev_id;
1467
1468         /*
1469          * Disable interrupts until the pin has stabilized and check
1470          * the state then. Use mod_timer() since we may be in the
1471          * middle of the timer routine when this interrupt triggers.
1472          */
1473         disable_irq_nosync(irq);
1474         mod_timer(&slot->detect_timer, jiffies + msecs_to_jiffies(20));
1475
1476         return IRQ_HANDLED;
1477 }
1478
1479 static int __init atmci_init_slot(struct atmel_mci *host,
1480                 struct mci_slot_pdata *slot_data, unsigned int id,
1481                 u32 sdc_reg)
1482 {
1483         struct mmc_host                 *mmc;
1484         struct atmel_mci_slot           *slot;
1485
1486         mmc = mmc_alloc_host(sizeof(struct atmel_mci_slot), &host->pdev->dev);
1487         if (!mmc)
1488                 return -ENOMEM;
1489
1490         slot = mmc_priv(mmc);
1491         slot->mmc = mmc;
1492         slot->host = host;
1493         slot->detect_pin = slot_data->detect_pin;
1494         slot->wp_pin = slot_data->wp_pin;
1495         slot->detect_is_active_high = slot_data->detect_is_active_high;
1496         slot->sdc_reg = sdc_reg;
1497
1498         mmc->ops = &atmci_ops;
1499         mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512);
1500         mmc->f_max = host->bus_hz / 2;
1501         mmc->ocr_avail  = MMC_VDD_32_33 | MMC_VDD_33_34;
1502         if (slot_data->bus_width >= 4)
1503                 mmc->caps |= MMC_CAP_4_BIT_DATA;
1504
1505         mmc->max_hw_segs = 64;
1506         mmc->max_phys_segs = 64;
1507         mmc->max_req_size = 32768 * 512;
1508         mmc->max_blk_size = 32768;
1509         mmc->max_blk_count = 512;
1510
1511         /* Assume card is present initially */
1512         set_bit(ATMCI_CARD_PRESENT, &slot->flags);
1513         if (gpio_is_valid(slot->detect_pin)) {
1514                 if (gpio_request(slot->detect_pin, "mmc_detect")) {
1515                         dev_dbg(&mmc->class_dev, "no detect pin available\n");
1516                         slot->detect_pin = -EBUSY;
1517                 } else if (gpio_get_value(slot->detect_pin) ^
1518                                 slot->detect_is_active_high) {
1519                         clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
1520                 }
1521         }
1522
1523         if (!gpio_is_valid(slot->detect_pin))
1524                 mmc->caps |= MMC_CAP_NEEDS_POLL;
1525
1526         if (gpio_is_valid(slot->wp_pin)) {
1527                 if (gpio_request(slot->wp_pin, "mmc_wp")) {
1528                         dev_dbg(&mmc->class_dev, "no WP pin available\n");
1529                         slot->wp_pin = -EBUSY;
1530                 }
1531         }
1532
1533         host->slot[id] = slot;
1534         mmc_add_host(mmc);
1535
1536         if (gpio_is_valid(slot->detect_pin)) {
1537                 int ret;
1538
1539                 setup_timer(&slot->detect_timer, atmci_detect_change,
1540                                 (unsigned long)slot);
1541
1542                 ret = request_irq(gpio_to_irq(slot->detect_pin),
1543                                 atmci_detect_interrupt,
1544                                 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
1545                                 "mmc-detect", slot);
1546                 if (ret) {
1547                         dev_dbg(&mmc->class_dev,
1548                                 "could not request IRQ %d for detect pin\n",
1549                                 gpio_to_irq(slot->detect_pin));
1550                         gpio_free(slot->detect_pin);
1551                         slot->detect_pin = -EBUSY;
1552                 }
1553         }
1554
1555         atmci_init_debugfs(slot);
1556
1557         return 0;
1558 }
1559
1560 static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot,
1561                 unsigned int id)
1562 {
1563         /* Debugfs stuff is cleaned up by mmc core */
1564
1565         set_bit(ATMCI_SHUTDOWN, &slot->flags);
1566         smp_wmb();
1567
1568         mmc_remove_host(slot->mmc);
1569
1570         if (gpio_is_valid(slot->detect_pin)) {
1571                 int pin = slot->detect_pin;
1572
1573                 free_irq(gpio_to_irq(pin), slot);
1574                 del_timer_sync(&slot->detect_timer);
1575                 gpio_free(pin);
1576         }
1577         if (gpio_is_valid(slot->wp_pin))
1578                 gpio_free(slot->wp_pin);
1579
1580         slot->host->slot[id] = NULL;
1581         mmc_free_host(slot->mmc);
1582 }
1583
1584 #ifdef CONFIG_MMC_ATMELMCI_DMA
1585 static bool filter(struct dma_chan *chan, void *slave)
1586 {
1587         struct dw_dma_slave *dws = slave;
1588
1589         if (dws->dma_dev == chan->device->dev) {
1590                 chan->private = dws;
1591                 return true;
1592         } else
1593                 return false;
1594 }
1595 #endif
1596
1597 static int __init atmci_probe(struct platform_device *pdev)
1598 {
1599         struct mci_platform_data        *pdata;
1600         struct atmel_mci                *host;
1601         struct resource                 *regs;
1602         unsigned int                    nr_slots;
1603         int                             irq;
1604         int                             ret;
1605
1606         regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1607         if (!regs)
1608                 return -ENXIO;
1609         pdata = pdev->dev.platform_data;
1610         if (!pdata)
1611                 return -ENXIO;
1612         irq = platform_get_irq(pdev, 0);
1613         if (irq < 0)
1614                 return irq;
1615
1616         host = kzalloc(sizeof(struct atmel_mci), GFP_KERNEL);
1617         if (!host)
1618                 return -ENOMEM;
1619
1620         host->pdev = pdev;
1621         spin_lock_init(&host->lock);
1622         INIT_LIST_HEAD(&host->queue);
1623
1624         host->mck = clk_get(&pdev->dev, "mci_clk");
1625         if (IS_ERR(host->mck)) {
1626                 ret = PTR_ERR(host->mck);
1627                 goto err_clk_get;
1628         }
1629
1630         ret = -ENOMEM;
1631         host->regs = ioremap(regs->start, regs->end - regs->start + 1);
1632         if (!host->regs)
1633                 goto err_ioremap;
1634
1635         clk_enable(host->mck);
1636         mci_writel(host, CR, MCI_CR_SWRST);
1637         host->bus_hz = clk_get_rate(host->mck);
1638         clk_disable(host->mck);
1639
1640         host->mapbase = regs->start;
1641
1642         tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)host);
1643
1644         ret = request_irq(irq, atmci_interrupt, 0, dev_name(&pdev->dev), host);
1645         if (ret)
1646                 goto err_request_irq;
1647
1648 #ifdef CONFIG_MMC_ATMELMCI_DMA
1649         if (pdata->dma_slave.dma_dev) {
1650                 struct dw_dma_slave *dws = &pdata->dma_slave;
1651                 dma_cap_mask_t mask;
1652
1653                 dws->tx_reg = regs->start + MCI_TDR;
1654                 dws->rx_reg = regs->start + MCI_RDR;
1655
1656                 /* Try to grab a DMA channel */
1657                 dma_cap_zero(mask);
1658                 dma_cap_set(DMA_SLAVE, mask);
1659                 host->dma.chan = dma_request_channel(mask, filter, dws);
1660         }
1661         if (!host->dma.chan)
1662                 dev_notice(&pdev->dev, "DMA not available, using PIO\n");
1663 #endif /* CONFIG_MMC_ATMELMCI_DMA */
1664
1665         platform_set_drvdata(pdev, host);
1666
1667         /* We need at least one slot to succeed */
1668         nr_slots = 0;
1669         ret = -ENODEV;
1670         if (pdata->slot[0].bus_width) {
1671                 ret = atmci_init_slot(host, &pdata->slot[0],
1672                                 MCI_SDCSEL_SLOT_A, 0);
1673                 if (!ret)
1674                         nr_slots++;
1675         }
1676         if (pdata->slot[1].bus_width) {
1677                 ret = atmci_init_slot(host, &pdata->slot[1],
1678                                 MCI_SDCSEL_SLOT_B, 1);
1679                 if (!ret)
1680                         nr_slots++;
1681         }
1682
1683         if (!nr_slots) {
1684                 dev_err(&pdev->dev, "init failed: no slot defined\n");
1685                 goto err_init_slot;
1686         }
1687
1688         dev_info(&pdev->dev,
1689                         "Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
1690                         host->mapbase, irq, nr_slots);
1691
1692         return 0;
1693
1694 err_init_slot:
1695 #ifdef CONFIG_MMC_ATMELMCI_DMA
1696         if (host->dma.chan)
1697                 dma_release_channel(host->dma.chan);
1698 #endif
1699         free_irq(irq, host);
1700 err_request_irq:
1701         iounmap(host->regs);
1702 err_ioremap:
1703         clk_put(host->mck);
1704 err_clk_get:
1705         kfree(host);
1706         return ret;
1707 }
1708
1709 static int __exit atmci_remove(struct platform_device *pdev)
1710 {
1711         struct atmel_mci        *host = platform_get_drvdata(pdev);
1712         unsigned int            i;
1713
1714         platform_set_drvdata(pdev, NULL);
1715
1716         for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
1717                 if (host->slot[i])
1718                         atmci_cleanup_slot(host->slot[i], i);
1719         }
1720
1721         clk_enable(host->mck);
1722         mci_writel(host, IDR, ~0UL);
1723         mci_writel(host, CR, MCI_CR_MCIDIS);
1724         mci_readl(host, SR);
1725         clk_disable(host->mck);
1726
1727 #ifdef CONFIG_MMC_ATMELMCI_DMA
1728         if (host->dma.chan)
1729                 dma_release_channel(host->dma.chan);
1730 #endif
1731
1732         free_irq(platform_get_irq(pdev, 0), host);
1733         iounmap(host->regs);
1734
1735         clk_put(host->mck);
1736         kfree(host);
1737
1738         return 0;
1739 }
1740
1741 static struct platform_driver atmci_driver = {
1742         .remove         = __exit_p(atmci_remove),
1743         .driver         = {
1744                 .name           = "atmel_mci",
1745         },
1746 };
1747
1748 static int __init atmci_init(void)
1749 {
1750         return platform_driver_probe(&atmci_driver, atmci_probe);
1751 }
1752
1753 static void __exit atmci_exit(void)
1754 {
1755         platform_driver_unregister(&atmci_driver);
1756 }
1757
1758 late_initcall(atmci_init); /* try to load after dma driver when built-in */
1759 module_exit(atmci_exit);
1760
1761 MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
1762 MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>");
1763 MODULE_LICENSE("GPL v2");