+#!/bin/bash
+# Released under the GPL
+# LED-Settings, v1.0, written by Michael Mrozek aka EvilDragon 2013.
+
+ . /usr/pandora/scripts/op_paths.sh
+
+while mainsel=$(zenity --title="LED-Settings" --width="400" --height="370" --list --column "id" --column "Please select" --hide-column=1 --text="Welcome to the LED-Settings-Dialogue.\n\nWhat do you want to do?\n" "normal" "Set Power LED Brightness (normal mode)" "power" "Set Power LED Brightness (powersave)" "sd1" "Enable / Disable SD1 LED" "sd2" "Enable / Disable SD2 LED" "wifi" "Enable / Disable WiFi LED" "bt" "Enable / Disable Bluetooth LED" --ok-label="Change Setting" --cancel-label="Exit"); do
+
+case $mainsel in
+
+ "normal")
+ curbright=$(cat /etc/pandora/conf/led.conf | grep HighPowerLED: | awk -F\: '{print $2}')
+ while newbright=$(zenity --scale --text "Set brightness of Power LED (normal mode)" --min-value=0 --max-value=255 --value=$curbright --step 1 --ok-label="Set new brightness" --cancel-label="Save and exit"); do
+ curbright=$newbright
+ echo $curbright > /sys/class/leds/pandora\:\:power/brightness
+ done
+ sed -i "s/.*HighPowerLED.*/HighPowerLED:$curbright/g" /etc/pandora/conf/led.conf
+ zenity --info --title="Power LED Brightness Set" --text "The new power LED Brightness setting has been saved." --timeout 6
+ ;;
+
+ "power")
+ normbright=$(cat /sys/class/leds/pandora\:\:power/brightness)
+ curbright=$(cat /etc/pandora/conf/led.conf | grep LowPowerLED: | awk -F\: '{print $2}')
+ echo $curbright > /sys/class/leds/pandora\:\:power/brightness
+ while newbright=$(zenity --scale --text "Set brightness of Power LED (Powersave mode)" --min-value=0 --max-value=255 --value=$curbright --step 1 --ok-label="Set new brightness" --cancel-label="Save and exit"); do
+ curbright=$newbright
+ echo $curbright > /sys/class/leds/pandora\:\:power/brightness
+ done
+ sed -i "s/.*LowPowerLED.*/LowPowerLED:$curbright/g" /etc/pandora/conf/led.conf
+ zenity --info --title="Power LED Brightness Set" --text "The new power LED Brightness setting (Powersave mode) has been saved." --timeout 6
+ echo $normbright > /sys/class/leds/pandora\:\:power/brightness
+ ;;
+
+ "sd1")
+ if zenity --question --title="Enable / Disable LED?" --text="Do you want to enable or disable the LED for SD Card 1?" --ok-label="Enable it" --cancel-label="Disable it"; then
+ echo mmc0 > /sys/class/leds/pandora\:\:sd1/trigger
+ sed -i "s/.*pandora::sd1.*/pandora::sd1 mmc0/g" /etc/default/leds
+ else
+ echo none > /sys/class/leds/pandora\:\:sd1/trigger
+ sed -i "s/.*pandora::sd1.*/pandora::sd1 none/g" /etc/default/leds
+ fi
+ ;;
+
+ "sd2")
+ if zenity --question --title="Enable / Disable LED?" --text="Do you want to enable or disable the LED for SD Card 2?" --ok-label="Enable it" --cancel-label="Disable it"; then
+ echo mmc1 > /sys/class/leds/pandora\:\:sd2/trigger
+ sed -i "s/.*pandora::sd2.*/pandora::sd2 mmc1/g" /etc/default/leds
+ else
+ echo none > /sys/class/leds/pandora\:\:sd2/trigger
+ sed -i "s/.*pandora::sd2.*/pandora::sd2 none/g" /etc/default/leds
+ fi
+ ;;
+
+ "bt")
+ if zenity --question --title="Enable / Disable LED?" --text="Do you want to enable or disable the LED for the Bluetooth LED?" --ok-label="Enable it" --cancel-label="Disable it"; then
+ echo bluetooth > /sys/class/leds/pandora\:\:bluetooth/trigger
+ sed -i "s/.*pandora::bluetooth.*/pandora::bluetooth bluetooth/g" /etc/default/leds
+ if hciconfig "$INTERFACE" | grep UP &>/dev/null
+ then
+ echo default-on > /sys/class/leds/pandora\:\:bluetooth/trigger
+ echo 255 > /sys/class/leds/pandora\:\:bluetooth/brightness
+ fi
+ else
+ echo none > /sys/class/leds/pandora\:\:bluetooth/trigger
+ sed -i "s/.*pandora::bluetooth.*/pandora::bluetooth none/g" /etc/default/leds
+ fi
+ ;;
+
+ "wifi")
+ if zenity --question --title="Enable / Disable LED?" --text="Do you want to enable or disable the WiFi LED?" --ok-label="Enable it" --cancel-label="Disable it"; then
+ sed -i "s/.*pandora::wifi.*/pandora::wifi phy0radio/g" /etc/default/leds
+ if [ "`lsmod | grep wl1251`" ]
+ then
+ phy_idx=0
+ for a in `seq 20` ; do
+ if [ -e /sys/class/net/wlan0 ] ; then
+ phy_idx=$(cat /sys/class/net/wlan0/phy80211/index)
+ break
+ else
+ sleep 0.2
+ fi
+ done
+
+ # restore phy related LED triggers (they come from mac80211.ko)
+ if [ -e /sys/class/leds/ ] ; then
+ for led in /sys/class/leds/* ; do
+ trigger=$(grep "$(basename $led)" /etc/default/leds | grep phy | \
+ awk '{print $2}' | sed -e 's/.*phy[0-9]*\(.*\)/\1/')
+ if [ "x$trigger" != "x" ] ; then
+ echo "phy${phy_idx}$trigger" > "$led/trigger"
+ fi
+ done
+ fi
+ fi
+ zenity --info --title="WiFi LED Set" --text "The WiFi LED has been enabled.\nPlease note: You need to disable and re-enable WiFi before it switches on again." --timeout 6
+ else
+ echo none > /sys/class/leds/pandora\:\:wifi/trigger
+ sed -i "s/.*pandora::wifi.*/pandora::wifi none/g" /etc/default/leds
+ fi
+ ;;
+esac
+done
+