[media] v4l: videobuf2: Typo fix

vb2_get_plane_payload() gets the bytesused field for a plane, it doesn't
set it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers:media:cx231xx.h remove one to many l's in the word

The patch below removes an extra "l" in the word.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers:media:cx23418.h remove one to many l's in the word

The patch below removes an extra "l" in the word.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging/cx25721: serialize access to devlist

Out of the three files accessing the device list,
one uses a mutex, one uses the BKL and one does
not have any locking. That is of course pointless,
so let's make all of them use the same mutex,
and get rid of one more BKL user.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Palash Bandyopadhyay <palash.bandyopadhyay@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: add audio conf for new cards

Add configuration of an audio for our new TV cards.

With my best regards, Dmitry.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dw2102: prof 1100 corrected

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dw2102: i2c transfer corrected for yet another cards

Related to Acorp DS120 and some revisions of DVBWorld DW2102.
If you read three or more registers at one time, you get wrong value for third etc.
Actually, it didn't affect the driver as it reads registers only by one at a time.
But it needs to correct.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dw2102: i2c transfer corrected for some cards

Prof 7500 and TeVii s630, s660, s480 works better now

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dw2102: remove unnecessary delays for i2c transfer for some cards

Prof 7500 and TeVii s630, s660, s480 works faster now

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dw2102: X3M TV SPC1400HD added

The card consist of PCI to USB bridge and USB DVB-S2 receiver.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ds3000: wrong hardware tune function implemented

It is taken from another tree, where it is modified.
Patch to fix that

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] stv0900: Update status when LOCK is missed

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] stv0900: speed up DVB-S searching

Simptoms:
After zapping DVB-S2 channel searching for DVB-S tooks long time.
Now it takes less than a second.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx23885, altera-ci: remove operator return <value> in void procedure

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib9000: fix return type in dib9000_mbx_send_attr()

dib9000_mbx_send_attr() returns an int.  It doesn't work to save
negative error codes in an unsigned char, so I've made "ret" an int
type.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib8000: fix small memory leak on error

kfree(state) if fe allocation fails.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ASoC: WL1273 FM radio: Access I2C IO functions through pointers

These changes are needed to keep up with the changes in the
MFD core and V4L2 parts of the wl1273 FM radio driver.

Use function pointers instead of exported functions for I2C IO.
Also move all preprocessor constants from the wl1273.h to
include/linux/mfd/wl1273-core.h.

Also update the year in the copyright statement.

Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L2: WL1273 FM Radio: TI WL1273 FM radio driver

This module implements V4L2 controls for the Texas Instruments
WL1273 FM Radio and handles the communication with the chip.

Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] MFD: WL1273 FM Radio: MFD driver for the FM radio

This is the core of the WL1273 FM radio driver, it connects
the two child modules. The two child drivers are
drivers/media/radio/radio-wl1273.c and sound/soc/codecs/wl1273.c.

The radio-wl1273 driver implements the V4L2 interface and communicates
with the device. The ALSA codec offers digital audio, without it only
analog audio is available.

Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DocBook/v4l2.xml: Update version of the spec

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DocBook: Document the removal of the old VIDIOC_*_OLD ioctls

Those ioctls passed away. Properly documented it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] videodev2.h.xml: Update to reflect videodev2.h changes

A few changes happened at videodev2.h:
- Addition of multiplane API;
- removal of VIDIOC_*_OLD ioctls;
- a few more video standards.

Update the file to reflect the latest changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

matrox: Remove legacy VIDIOC_*_OLD ioctls

Those ioctls were produced by the wrong arguments for _IO macros,
and were replaced by fixed versions on an early 2.6 kernel.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media/radio/wl1273: fix build errors

RADIO_WL1273 needs to make sure that the mfd core is built to avoid
build errors:

ERROR: "mfd_add_devices" [drivers/mfd/wl1273-core.ko] undefined!
ERROR: "mfd_remove_devices" [drivers/mfd/wl1273-core.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Matti Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] via-camera: Add suspend/resume support

Add suspend/resume support to the via-camera driver, so that the video
continues streaming over a suspend-resume cycle.

Originally implemented by Jon Corbet.

[mchehab@redhat.com: fix a small CodingStyle issue]
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Technisat AirStar TeleStick 2

Based on staging 2.6.39.

This patch is based on Veit Berwig's work.

Signed-off-by: Lukas Fisch <lukas.fisch@gmail.com>
Thanks-to: Veit Berwig <veit.Berwig@fimi.landsh.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] stv090x: handle allocation failures

kmalloc() can fail so check whether state->internal is NULL.
append_internal() can return NULL on allocation failures so check that.
Also if we hit the error condition later in the function then there is
a memory leak and we need to call remove_dev() to fix it.

Also Oliver Endriss pointed out an additional leak that I missed in the
first version of this patch.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers:media:radio: Update Kconfig and Makefile for wl128x FM driver

Signed-off-by: Manjunatha Halli <manjunatha_halli@ti.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers:media:radio: wl128x: Kconfig & Makefile for wl128x driver

Signed-off-by: Manjunatha Halli <manjunatha_halli@ti.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers:media:radio: wl128x: FM driver TX sources

This has implementation for FM TX functionality.
It communicates with FM V4l2 module and FM common module.

Signed-off-by: Manjunatha Halli <manjunatha_halli@ti.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers:media:radio: wl128x: FM driver RX sources

This has implementation for FM RX functionality.
It communicates with FM V4l2 module and FM common module

Signed-off-by: Manjunatha Halli <manjunatha_halli@ti.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers:media:radio: wl128x: FM Driver Common sources

These are the sources for the common interfaces required by the
FM V4L2 driver for TI WL127x and WL128x chips.

These implement the FM channel-8 protocol communication with the
chip. This makes use of the Shared Transport as its transport.

Signed-off-by: Manjunatha Halli <manjunatha_halli@ti.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers:media:radio: wl128x: FM Driver V4L2 sources

This module interfaces V4L2 subsystem and FM common module.
It registers itself with V4L2 as Radio module.

Signed-off-by: Manjunatha Halli <manjunatha_halli@ti.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers:media:radio: wl128x: FM Driver common header file

These are common headers used in FM submodules (FM V4L2,
FM common, FM Rx,and FM TX).

Signed-off-by: Manjunatha Halli <manjunatha_halli@ti.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ivtv: yuv: handle get_user_pages() -errno returns

get_user_pages() may return -errno, such as -EFAULT.  So don't blindly use
its return value as an offset into dma->map[] for the next get_user_pages()
call.  Since we'll give up and return an error if either fails, don't even
make the second call if the first failed to give us exactly what we were
looking for.

The old code would also call put_page() on as many elements of dma->map[]
as we'd asked for, regardless of how many were valid.

[Andy Walls modified this patch to return -EFAULT instead of -EINVAL
as Paul's observation "I'm not sure -EINVAL is the best return code vs
-EFAULT or -ENOMEM, [...]" was correct.  The return value bubbles up
as a return code for write(), for which the V4L2 API spec indicates
EINVAL is incorrect and EFAULT is correct.]

Signed-off-by: Paul Cassella <fortytwo-ivtv@maneteren.bigw.org>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ivtv: Fix sparse warning regarding a user pointer in ivtv_write_vbi_from_user()

Fix the first, botched attempt at preventing direct use of a user pointer in
ivtv_write_vbi().

Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ivtv: udma: handle get_user_pages() returning fewer pages than we asked for

get_user_pages() may return fewer page than we ask for.  As we give up and
return an error in this case, we need to put_page() each of the pages we
did get.

[Andy Walls modified the patch, only removing the braces in the 'for'
statement, to eliminate a checkpatch warning.]

Signed-off-by: Paul Cassella <fortytwo-ivtv@manetheren.bigw.org>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Documentation: README.ivtv: Remove note that ivtvfb is not yet in the kernel

ivtvfb is now in the kernel, so stop saying it's not.

Signed-off-by: Paul Cassella <fortytwo-ivtv@manetheren.bigw.org>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx88: add support for TeVii S464 PCI card

The card uses ds3000 demod from Montage.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ds3000: hardware tune algorithm

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ds3000: add carrier offset calculation

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ds3000: remove unnecessary dnxt, dcur structures

All necessary parameters already stored in frontend cache.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ds3000: clean up in tune procedure

Variable 'retune' does not make sense.
Loop is not needed for only one try.
Remove unnecessary dprintk's.
Remove a lot of debug messages and delays.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dw2102: Copyright, cards list updated

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dw2102: add support for the TeVii S480 PCIe

The card consists of a PCI-e to USB Host Controller and
two TeVii S660 equivalent cards.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dw2102: fix TeVii s660 remote control

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dw2102: corrections for TeVii s660 LNB power control

There are two TeVii s660 modifications with different LNB power control
implementations. It is safe to call both methods for each card.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dw2102: unnecessary NULL's removed

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dw2102: Prof 1100 initialization fix

RC keys structure for Prof 1100 already defined, so remove extra initialization.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dw2102: Prof 7500 remote fix

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dw2102: Prof 7500: Lock LED implemented

Code changed for dw2102, stv0900 in order to achieve that.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dw2102: Add Terratec Cinergy S2 USB HD

MarkusF wrote:
I accidently got a Terratec Cinergy S2 USB HD (instead of a Terratec Cinergy S2 PCI HD).
I found in the windows driver, that the driver is for the usb ids:
0CCD:00A8
1F4D:3000
The dvb-s2 usb adapter has the id 0CCD-00A8.
So I patches your driver and added the usb id, where the 1F4D:3000 is
and it worked (after I downloaded the firmware dvb-fe-ds3000.fw).
w_scan found the channels and vdr is working fine.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dw2102: add support for Geniatech SU3000 USB DVB-S2 card

The card uses ds3000 demod from Montage.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dw2102: use separate firmwares for Prof 1100, TeVii S630, S660

Before this patch we can use only one card type from list due to
sharing one firmware name. Now it's fixed.
Also driver tries to attach only appropriate demod for this cards.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dw2102: Extend keymap parameter for not used remote

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] TTUSB DVB: ttusb_boot_dsp() needs to release_firmware() or it leaks memory

In drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c:ttusb_boot_dsp() we
need to call release_firmware(fw) before returning or we'll leak - no
matter if we succeed or fail.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] pvrusb2: Use sysfs_attr_init() where appropriate

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] pvrusb2: Minor VBI tweak to help potential CC support

pvrusb2: Declare closed-caption setup for line 21 - this is needed for
sliced VBI capture support.  (However none of that works right now
anyway.)

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] pvrusb2: width and height maximum values

pvrusb2: The origin of the capability bounds rectangle may differ from
(left=0,top=0) so the calculation should use absolute coordinates,
here below, or use relative coordinates like
cropl_val-cap->bounds.left and cropt_val-cap->bounds.top.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] pvrusb2: Fix a few missing default control values, for cropping

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] pvrusb2: Minor cosmetic code tweak

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] pvrusb2: Handle change of mode before handling change of video standard

pvrusb2: Recognize and handle mode change before dealing with changes
related to the video standard.  Even though the video standard should
only matter when in analog mode, doing this way is technically cleaner
in case there's other stuff that might depend on both.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dvb_pll: DVB-S incorrect tune settings for dw2102/dm1105/cx88/opera1

This tuner PLL has missing initialisation settings resulting in
haphazard tuning. The PLL LPF was set to just 22000 symbol rate.

Basically, the module is a Sharp BS2F7HZ0194 (STV0299+IX2410)

I have had problems implementing the PLL in a new driver and
did not want to break the IX2410 out of the PLL.

This applies to DW2102, DM1105, CX88 and OPERA1 drivers.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] firedtv: drop obsolete backend abstraction

Since the drivers/ieee1394/ backend was removed from firedtv, its I/O no
longer needs to be abstracted as exchangeable backend methods.

Also, ieee1394 variants of module and device probe and removal are no
longer there.  Move module probe and removal into firedtv-fw.c where
device probe and removal are implemented.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] video: sn9c102: world-wirtable sysfs files

Don't allow everybody to change video settings.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: add radio support to the driver

Changes:
  Add function tm6000_set_reg_mask for change some bits in regs. Very usefull, simplify some code with this function.
  Add control mute
  Add control volume
  Add control audio input MUX
  Add support radio

Radio works well. TV works too

Known bugs:
  The programm gnomeradio can't set freq for radio, it use old v4l API. Audio over USB works via arecord.
  The programm mplayer can set freq but no any audio
           mplayer -v -rawaudio rate=48000 radio://105.2/capture driver=v4l2:alsa:adevice=hw.1,0:amode=1:audiorate=48000:forceaudio:immediatemode=0
  When start watch TV very shortly after radio the kernel crashed hardly. Didn't stop all USB URBs, need some time for stop.

[mchehab@redhat.com: fix merge conflicts]

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Add support for Terratec Grabster AV 150/250 MX

This patch adds support for Terratec Grabster AV 150/250 MX. For now it is
only possible to use composite input as switching inputs does not work.

[mchehab@redhat.com: Fix merge conflicts and simplify board entries]
Signed-off-by: Holger Nelson <hnelson@hnelson.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: add new TV cards of Beholder

Add two new TV cards of Beholder.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ds3000: don't load firmware during demod init

Speed up tuning, as firmware is not necessary to load every attempt to tune

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ds3000: loading firmware in bigger chunks

Decrease firmware loading time. Before it is ~4000 i2c calls,
now it is ~256 i2c calls to load ds3000 firmware.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ds3000: decrease mpeg clock output

TeVii s480 works fine with that on DVB-S2 channels

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ds3000: fill in demod init function

Make some initializations in init, not in tune function

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Add proper audio support for Nova-S Plus with wm8775 ADC

This patch adds audio DMA capture and ALSA mixer elements for the line
input jack of the Hauppauge Nova-S-plus DVB-S PCI card.  The Nova-S-plus
has a WM8775 ADC that is currently not detected.  This patch enables
this chip and exports volume, balance mute and ALC elements for ALSA
mixer controls.

[mchehab@redhat.com: Changed the patch to only talk with wm8775 if board
info says so. Also, added platform_data support, to avoid changing the
behaviour for other boards, and fixed CodingStyle]

[awalls@md.metrocast.net: Changed patch to make the WM8775_GID defintion
bridge driver private and let the bridge driver set the value of
v4l2_subdev.grp_id.]

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>

[media] xc5000: add set_config and other

Add one more radio input, usefull for tm6010
Add control output amplitude.
Add set_config function for configure tuner when TV card hasn't dvb part.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] omap24xxcam: Fix compilation

Add linux/sched.h because of missing declaration of TASK_NORMAL.

This patch fixes the following error:

drivers/media/video/omap24xxcam.c: In function
'omap24xxcam_vbq_complete':
drivers/media/video/omap24xxcam.c:415: error: 'TASK_NORMAL' undeclared
(first use in this function)
drivers/media/video/omap24xxcam.c:415: error: (Each undeclared
identifier is reported only once
drivers/media/video/omap24xxcam.c:415: error: for each function it
appears in.)

Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] video/saa7164: Fix sparse warning: Using plain integer as NULL pointer

This patch fixes the warning "Using plain integer as NULL pointer",
generated by sparse, by replacing
if (var == 0)
with
if (!var)
after an allocation
and all other offending 0s with NULL.

KernelVersion: linus' tree-1f0324c

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx18: fix kernel oops when setting MPEG control before capturing

The cxhdl->priv field was not set initially, only after capturing started.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx23885, altera-ci: enable all PID's less than 0x20 in hardware PID filter

It takes too long time to scan due to low symbol rate PID's
like PAT, PMT, CAT, NIT.
For that matter we enabled permanently all PID's
less 0x20 in hardware PID filter for NetUP Dual DVB-T/C CI RF card
to combine rates.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx23885: disable MSI for NetUP cards, otherwise CI is not working

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx23885: implement num_fds_portb, num_fds_portc parameters for cx23885_board structure

This is needed for multifrontend support.
NetUP Dual DVB-T/C CI RF card has frontends connected to port B & C
Each frontend has two switchable cores - DVB-T & DVB-C

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx23885: implement tuner_bus parameter for cx23885_board structure

There is two external I2C buses in cx23885 chip.
Currently, analog tuners supported for second I2C bus only
In NetUP Dual DVB-T/C CI RF card tuners connected to first bus
So, in order to support analog tuners sitting on first bus
we need modifications.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Initial commit to support NetUP Dual DVB-T/C CI RF card

The card based on cx23885 PCI-e brige. Altera FPGA for CI,
multistandard demods stv0367 from STM for QAM & OFDM,  Xcieve xc5000 tuners
and additional cx25840 for second analog input.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] xc5000: add support for DVB-C tuning

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Support for stv0367 multi-standard demodulator

The STV0367 is a multi-standard demodulator which is
capable of processing DVB-T as well as DVB-C signals.
It is fully compliant with DVB-T and DVB-C
recommendations for broadcast services.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Altera FPGA based CI driver module

An Altera FPGA CI module for NetUP Dual DVB-T/C RF CI card.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Altera FPGA firmware download module

It uses STAPL files and programs Altera FPGA through JTAG.
Interface to JTAG must be provided from main device module,
for example through cx23885 GPIO.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] video/cx231xx: Fix sparse warning: Using plain integer as NULL pointer

This patch fixes the warning "Using plain integer as NULL pointer",
generated by sparse, by replacing the offending 0s with NULL.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Reviewed-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: Initial submit of OV9740 driver

This soc_camera driver is for Omnivision's OV9740 sensor.  This initial
submission provides support for YUV422 output at 1280x720 (720p), which is
the sensor's native resolution.  640x480 (VGA) is also supported, with
cropping and scaling performed by the sensor's ISP.

This driver is heavily based off of the existing OV9640 driver.

Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4l: sh_mobile_ceu_camera: fix cropping offset calculation

Use the correct scales to calculate cropping offsets.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: mx3_camera: convert to videobuf2

Now that soc-camera supports videobuf API v1 and v2, camera-host drivers
can be converted to videobuf2 individually. This patch converts the
mx3_camera driver.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: sh_mobile_ceu_camera: convert to videobuf2

Convert the sh_mobile_ceu_camera driver to the videobuf2 API.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: soc-camera: add helper functions for videobuf queue handling

Add two helper inline functions to retrieve soc-camera device context
from videobuf and videobuf2 queue pointers.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: soc-camera: extend to also support videobuf2

Extend soc-camera core to also support the videobuf2 API.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: add missing EXPORT_SYMBOL* statements to vb2

videobuf2-memops and videobuf2-core can be compiled as modules, in which
case 3 more symbols from videobuf2-memops.c have to be exported.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: omap1_camera: join split format lines

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: mx3_camera: fix capture issues for non 8-bit per pixel formats

If the camera was set to output formats like RGB565 YUYV or SBGGR10,
the resulting image was scrambled due to erroneous interpretations of
horizontal parameter's units.

This patch in fourcc_to_ipu_pix, eliminate also the pixel formats mappings
that, first are not used within mainline code and second, standing at
the datasheets, they will not work properly:

The IPU internal bus support only the following data formatting
(44.1.1.3 Data Flows and Formats):
 1 YUV 4:4:4 or RGB-8 bits per color component
 2 YUV 4:4:4 or RGB-10 bits per color component
 3 Generic data (from sensor to the system memory only)

And format conversions are done:
 - from memory: unpacking from other formats to IPU supported ones
 - to memory: packing in the inverse order.

So, assigning a packing/unpacking strategy to the IPU for those formats
will produce a packing to memory and not the inverse.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: mx3_camera: correct 'sizeimage' value reporting

The 'pix->width' field may be updated in mx3_camera_set_fmt() to
fulfill the IPU stride line alignment requirements. If this update
takes place, the 'fmt.pix.sizeimage' field in the struct v4l2_format
stucture returned by VIDIOC_S_FMT is wrong. We need to update the
'pix->sizeimage' field in the mx3_camera_set_fmt() function to fix
this issue.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: omap1_camera: fix use after free

Even though clk_put() is a no-op on most architectures it is not for
some ARM implementations. To not fail on those, release the clock timer
before freeing the surrounding structure.

This bug was spotted by the semantic patch tool coccinelle using the
script found at scripts/coccinelle/free/kfree.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: soc_mediabus: add a method to obtain the number of samples per pixel

Add a function to calculate the number of samples on the media-bus,
required to retrieve one pixel of a certain format.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: soc-camera: start stream after queueing the buffers

Some camera systems have strong requirement for capturing
an exact number of frames after starting the stream and do
not tolerate losing captured frames. By starting the stream
after the videobuf has queued the buffers, we ensure that
no frame will be lost.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>