#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
+#include <linux/platform_data/asoc-mx27vis.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/tlv.h>
#include <asm/mach-types.h>
-#include <mach/iomux-mx27.h>
#include "../codecs/tlv320aic32x4.h"
#include "imx-ssi.h"
#define MX27VIS_AMP_GAIN 0
#define MX27VIS_AMP_MUTE 1
-#define MX27VIS_PIN_G0 (GPIO_PORTF + 9)
-#define MX27VIS_PIN_G1 (GPIO_PORTF + 8)
-#define MX27VIS_PIN_SDL (GPIO_PORTE + 5)
-#define MX27VIS_PIN_SDR (GPIO_PORTF + 7)
-
static int mx27vis_amp_gain;
static int mx27vis_amp_mute;
-
-static const int mx27vis_amp_pins[] = {
- MX27VIS_PIN_G0 | GPIO_GPIO | GPIO_OUT,
- MX27VIS_PIN_G1 | GPIO_GPIO | GPIO_OUT,
- MX27VIS_PIN_SDL | GPIO_GPIO | GPIO_OUT,
- MX27VIS_PIN_SDR | GPIO_GPIO | GPIO_OUT,
-};
+static int mx27vis_amp_gain0_gpio;
+static int mx27vis_amp_gain1_gpio;
+static int mx27vis_amp_mutel_gpio;
+static int mx27vis_amp_muter_gpio;
static int mx27vis_aic32x4_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
switch (reg) {
case MX27VIS_AMP_GAIN:
- gpio_set_value(MX27VIS_PIN_G0, value & 1);
- gpio_set_value(MX27VIS_PIN_G1, value >> 1);
+ gpio_set_value(mx27vis_amp_gain0_gpio, value & 1);
+ gpio_set_value(mx27vis_amp_gain1_gpio, value >> 1);
mx27vis_amp_gain = value;
break;
case MX27VIS_AMP_MUTE:
- gpio_set_value(MX27VIS_PIN_SDL, value & 1);
- gpio_set_value(MX27VIS_PIN_SDR, value >> 1);
+ gpio_set_value(mx27vis_amp_mutel_gpio, value & 1);
+ gpio_set_value(mx27vis_amp_muter_gpio, value >> 1);
mx27vis_amp_mute = value;
break;
}
.num_dapm_routes = ARRAY_SIZE(aic32x4_dapm_routes),
};
-static int __devinit mx27vis_aic32x4_probe(struct platform_device *pdev)
+static int mx27vis_aic32x4_probe(struct platform_device *pdev)
{
+ struct snd_mx27vis_platform_data *pdata = pdev->dev.platform_data;
int ret;
+ if (!pdata) {
+ dev_err(&pdev->dev, "No platform data supplied\n");
+ return -EINVAL;
+ }
+
+ mx27vis_amp_gain0_gpio = pdata->amp_gain0_gpio;
+ mx27vis_amp_gain1_gpio = pdata->amp_gain1_gpio;
+ mx27vis_amp_mutel_gpio = pdata->amp_mutel_gpio;
+ mx27vis_amp_muter_gpio = pdata->amp_muter_gpio;
+
mx27vis_aic32x4.dev = &pdev->dev;
ret = snd_soc_register_card(&mx27vis_aic32x4);
if (ret) {
IMX_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0)
);
- ret = mxc_gpio_setup_multiple_pins(mx27vis_amp_pins,
- ARRAY_SIZE(mx27vis_amp_pins), "MX27VIS_AMP");
- if (ret)
- printk(KERN_ERR "ASoC: unable to setup gpios\n");
-
return ret;
}
-static int __devexit mx27vis_aic32x4_remove(struct platform_device *pdev)
+static int mx27vis_aic32x4_remove(struct platform_device *pdev)
{
snd_soc_unregister_card(&mx27vis_aic32x4);
.owner = THIS_MODULE,
},
.probe = mx27vis_aic32x4_probe,
- .remove = __devexit_p(mx27vis_aic32x4_remove),
+ .remove = mx27vis_aic32x4_remove,
};
module_platform_driver(mx27vis_aic32x4_audio_driver);