[ALSA] sound/pci/Kconfig - fix broken indenting for SND_FM801_TEA575X
[pandora-kernel.git] / sound / ppc / tumbler.c
index 15c63cb..692c611 100644 (file)
@@ -28,7 +28,6 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
-#include <linux/i2c-dev.h>
 #include <linux/kmod.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
@@ -239,8 +238,8 @@ static int tumbler_set_master_volume(struct pmac_tumbler *mix)
        block[4] = (right_vol >> 8)  & 0xff;
        block[5] = (right_vol >> 0)  & 0xff;
   
-       if (i2c_smbus_write_block_data(mix->i2c.client, TAS_REG_VOL,
-                                      6, block) < 0) {
+       if (i2c_smbus_write_i2c_block_data(mix->i2c.client, TAS_REG_VOL, 6,
+                                          block) < 0) {
                snd_printk("failed to set volume \n");
                return -EINVAL;
        }
@@ -345,8 +344,8 @@ static int tumbler_set_drc(struct pmac_tumbler *mix)
                val[1] = 0;
        }
 
-       if (i2c_smbus_write_block_data(mix->i2c.client, TAS_REG_DRC,
-                                      2, val) < 0) {
+       if (i2c_smbus_write_i2c_block_data(mix->i2c.client, TAS_REG_DRC,
+                                          2, val) < 0) {
                snd_printk("failed to set DRC\n");
                return -EINVAL;
        }
@@ -381,8 +380,8 @@ static int snapper_set_drc(struct pmac_tumbler *mix)
        val[4] = 0x60;
        val[5] = 0xa0;
 
-       if (i2c_smbus_write_block_data(mix->i2c.client, TAS_REG_DRC,
-                                      6, val) < 0) {
+       if (i2c_smbus_write_i2c_block_data(mix->i2c.client, TAS_REG_DRC,
+                                          6, val) < 0) {
                snd_printk("failed to set DRC\n");
                return -EINVAL;
        }
@@ -492,8 +491,8 @@ static int tumbler_set_mono_volume(struct pmac_tumbler *mix,
        vol = info->table[vol];
        for (i = 0; i < info->bytes; i++)
                block[i] = (vol >> ((info->bytes - i - 1) * 8)) & 0xff;
-       if (i2c_smbus_write_block_data(mix->i2c.client, info->reg,
-                                      info->bytes, block) < 0) {
+       if (i2c_smbus_write_i2c_block_data(mix->i2c.client, info->reg,
+                                          info->bytes, block) < 0) {
                snd_printk("failed to set mono volume %d\n", info->index);
                return -EINVAL;
        }
@@ -625,7 +624,8 @@ static int snapper_set_mix_vol1(struct pmac_tumbler *mix, int idx, int ch, int r
                for (j = 0; j < 3; j++)
                        block[i * 3 + j] = (vol >> ((2 - j) * 8)) & 0xff;
        }
-       if (i2c_smbus_write_block_data(mix->i2c.client, reg, 9, block) < 0) {
+       if (i2c_smbus_write_i2c_block_data(mix->i2c.client, reg,
+                                          9, block) < 0) {
                snd_printk("failed to set mono volume %d\n", reg);
                return -EINVAL;
        }
@@ -1121,7 +1121,7 @@ static long tumbler_find_device(const char *device, const char *platform,
        DBG("(I) GPIO device %s found, offset: %x, active state: %d !\n",
            device, gp->addr, gp->active_state);
 
-       return (node->n_intrs > 0) ? node->intrs[0].line : 0;
+       return irq_of_parse_and_map(node, 0);
 }
 
 /* reset audio */
@@ -1264,16 +1264,16 @@ static int __init tumbler_init(struct snd_pmac *chip)
                                    &mix->line_mute, 1);
        irq = tumbler_find_device("headphone-detect",
                                  NULL, &mix->hp_detect, 0);
-       if (irq < 0)
+       if (irq <= NO_IRQ)
                irq = tumbler_find_device("headphone-detect",
                                          NULL, &mix->hp_detect, 1);
-       if (irq < 0)
+       if (irq <= NO_IRQ)
                irq = tumbler_find_device("keywest-gpio15",
                                          NULL, &mix->hp_detect, 1);
        mix->headphone_irq = irq;
        irq = tumbler_find_device("line-output-detect",
                                  NULL, &mix->line_detect, 0);
-       if (irq < 0)
+       if (irq <= NO_IRQ)
                irq = tumbler_find_device("line-output-detect",
                                          NULL, &mix->line_detect, 1);
        mix->lineout_irq = irq;
@@ -1313,7 +1313,7 @@ int __init snd_pmac_tumbler_init(struct snd_pmac *chip)
 
 #ifdef CONFIG_KMOD
        if (current->fs->root)
-               request_module("i2c-keywest");
+               request_module("i2c-powermac");
 #endif /* CONFIG_KMOD */       
 
        mix = kmalloc(sizeof(*mix), GFP_KERNEL);