/*
- * Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ * Copyright (c) by Jaroslav Kysela <perex@perex.cz>
* Creative Labs, Inc.
* Routines for control of EMU10K1 chips
*
*
*/
-#include <sound/driver.h>
+#include <linux/sched.h>
+#include <linux/kthread.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#define HANA_FILENAME "emu/hana.fw"
#define DOCK_FILENAME "emu/audio_dock.fw"
+#define EMU1010B_FILENAME "emu/emu1010b.fw"
+#define MICRO_DOCK_FILENAME "emu/micro_dock.fw"
+#define EMU1010_NOTEBOOK_FILENAME "emu/emu1010_notebook.fw"
MODULE_FIRMWARE(HANA_FILENAME);
MODULE_FIRMWARE(DOCK_FILENAME);
+MODULE_FIRMWARE(EMU1010B_FILENAME);
+MODULE_FIRMWARE(MICRO_DOCK_FILENAME);
+MODULE_FIRMWARE(EMU1010_NOTEBOOK_FILENAME);
/*************************************************************************
return err;
}
snd_printk(KERN_INFO "firmware size=0x%zx\n", fw_entry->size);
+#if 0
if (fw_entry->size != 0x133a4) {
snd_printk(KERN_ERR "firmware: %s wrong size.\n",filename);
return -EINVAL;
}
+#endif
/* The FPGA is a Xilinx Spartan IIE XC2S50E */
/* GPIO7 -> FPGA PGMN
return 0;
}
+int emu1010_firmware_thread(void *data) {
+ struct snd_emu10k1 * emu = data;
+ int tmp,tmp2;
+ int reg;
+ int err;
+
+ for (;;) {
+ /* Delay to allow Audio Dock to settle */
+ msleep(1000);
+ if (kthread_should_stop())
+ break;
+ snd_emu1010_fpga_read(emu, EMU_HANA_IRQ_STATUS, &tmp ); /* IRQ Status */
+ snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, ® ); /* OPTIONS: Which cards are attached to the EMU */
+ if (reg & EMU_HANA_OPTION_DOCK_OFFLINE) {
+ /* Audio Dock attached */
+ /* Return to Audio Dock programming mode */
+ snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware\n");
+ snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, EMU_HANA_FPGA_CONFIG_AUDIODOCK );
+ if (emu->card_capabilities->emu1010 == 1) {
+ if ((err = snd_emu1010_load_firmware(emu, DOCK_FILENAME)) != 0) {
+ return err;
+ }
+ } else if (emu->card_capabilities->emu1010 == 2) {
+ if ((err = snd_emu1010_load_firmware(emu, MICRO_DOCK_FILENAME)) != 0) {
+ return err;
+ }
+ } else if (emu->card_capabilities->emu1010 == 3) {
+ if ((err = snd_emu1010_load_firmware(emu, MICRO_DOCK_FILENAME)) != 0) {
+ return err;
+ }
+ }
+
+ snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, 0 );
+ snd_emu1010_fpga_read(emu, EMU_HANA_IRQ_STATUS, ® );
+ snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_IRQ_STATUS=0x%x\n",reg);
+ /* ID, should read & 0x7f = 0x55 when FPGA programmed. */
+ snd_emu1010_fpga_read(emu, EMU_HANA_ID, ® );
+ snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_ID=0x%x\n",reg);
+ if ((reg & 0x1f) != 0x15) {
+ /* FPGA failed to be programmed */
+ snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware file failed, reg=0x%x\n", reg);
+ return 0;
+ return -ENODEV;
+ }
+ snd_printk(KERN_INFO "emu1010: Audio Dock Firmware loaded\n");
+ snd_emu1010_fpga_read(emu, EMU_DOCK_MAJOR_REV, &tmp );
+ snd_emu1010_fpga_read(emu, EMU_DOCK_MINOR_REV, &tmp2 );
+ snd_printk("Audio Dock ver:%d.%d\n",tmp ,tmp2);
+ /* Sync clocking between 1010 and Dock */
+ /* Allow DLL to settle */
+ msleep(10);
+ /* Unmute all. Default is muted after a firmware load */
+ snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE );
+ break;
+ }
+ }
+ return 0;
+}
+
+/*
+ * EMU-1010 - details found out from this driver, official MS Win drivers,
+ * testing the card:
+ *
+ * Audigy2 (aka Alice2):
+ * ---------------------
+ * * communication over PCI
+ * * conversion of 32-bit data coming over EMU32 links from HANA FPGA
+ * to 2 x 16-bit, using internal DSP instructions
+ * * slave mode, clock supplied by HANA
+ * * linked to HANA using:
+ * 32 x 32-bit serial EMU32 output channels
+ * 16 x EMU32 input channels
+ * (?) x I2S I/O channels (?)
+ *
+ * FPGA (aka HANA):
+ * ---------------
+ * * provides all (?) physical inputs and outputs of the card
+ * (ADC, DAC, SPDIF I/O, ADAT I/O, etc.)
+ * * provides clock signal for the card and Alice2
+ * * two crystals - for 44.1kHz and 48kHz multiples
+ * * provides internal routing of signal sources to signal destinations
+ * * inputs/outputs to Alice2 - see above
+ *
+ * Current status of the driver:
+ * ----------------------------
+ * * only 44.1/48kHz supported (the MS Win driver supports up to 192 kHz)
+ * * PCM device nb. 2:
+ * 16 x 16-bit playback - snd_emu10k1_fx8010_playback_ops
+ * 16 x 32-bit capture - snd_emu10k1_capture_efx_ops
+ */
static int snd_emu10k1_emu1010_init(struct snd_emu10k1 * emu)
{
unsigned int i;
/* ID, should read & 0x7f = 0x55. (Bit 7 is the IRQ bit) */
snd_emu1010_fpga_read(emu, EMU_HANA_ID, ® );
snd_printdd("reg1=0x%x\n",reg);
- if (reg == 0x55) {
+ if ((reg & 0x3f) == 0x15) {
/* FPGA netlist already present so clear it */
/* Return to programming mode */
}
snd_emu1010_fpga_read(emu, EMU_HANA_ID, ® );
snd_printdd("reg2=0x%x\n",reg);
- if (reg == 0x55) {
+ if ((reg & 0x3f) == 0x15) {
/* FPGA failed to return to programming mode */
+ snd_printk(KERN_INFO "emu1010: FPGA failed to return to programming mode\n");
return -ENODEV;
}
snd_printk(KERN_INFO "emu1010: EMU_HANA_ID=0x%x\n",reg);
- if ((err = snd_emu1010_load_firmware(emu, HANA_FILENAME)) != 0) {
- snd_printk(KERN_INFO "emu1010: Loading Hana Firmware file %s failed\n", HANA_FILENAME);
- return err;
+ if (emu->card_capabilities->emu1010 == 1) {
+ if ((err = snd_emu1010_load_firmware(emu, HANA_FILENAME)) != 0) {
+ snd_printk(KERN_INFO "emu1010: Loading Hana Firmware file %s failed\n", HANA_FILENAME);
+ return err;
+ }
+ } else if (emu->card_capabilities->emu1010 == 2) {
+ if ((err = snd_emu1010_load_firmware(emu, EMU1010B_FILENAME)) != 0) {
+ snd_printk(KERN_INFO "emu1010: Loading Firmware file %s failed\n", EMU1010B_FILENAME);
+ return err;
+ }
+ } else if (emu->card_capabilities->emu1010 == 3) {
+ if ((err = snd_emu1010_load_firmware(emu, EMU1010_NOTEBOOK_FILENAME)) != 0) {
+ snd_printk(KERN_INFO "emu1010: Loading Firmware file %s failed\n", EMU1010_NOTEBOOK_FILENAME);
+ return err;
+ }
}
/* ID, should read & 0x7f = 0x55 when FPGA programmed. */
snd_emu1010_fpga_read(emu, EMU_HANA_ID, ® );
- if (reg != 0x55) {
+ if ((reg & 0x3f) != 0x15) {
/* FPGA failed to be programmed */
snd_printk(KERN_INFO "emu1010: Loading Hana Firmware file failed, reg=0x%x\n", reg);
return -ENODEV;
snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, ® );
snd_printk(KERN_INFO "emu1010: Card options=0x%x\n",reg);
snd_emu1010_fpga_read(emu, EMU_HANA_OPTICAL_TYPE, &tmp );
- /* ADAT input. */
- snd_emu1010_fpga_write(emu, EMU_HANA_OPTICAL_TYPE, 0x01 );
+ /* Optical -> ADAT I/O */
+ /* 0 : SPDIF
+ * 1 : ADAT
+ */
+ emu->emu1010.optical_in = 1; /* IN_ADAT */
+ emu->emu1010.optical_out = 1; /* IN_ADAT */
+ tmp = 0;
+ tmp = (emu->emu1010.optical_in ? EMU_HANA_OPTICAL_IN_ADAT : 0) |
+ (emu->emu1010.optical_out ? EMU_HANA_OPTICAL_OUT_ADAT : 0);
+ snd_emu1010_fpga_write(emu, EMU_HANA_OPTICAL_TYPE, tmp );
snd_emu1010_fpga_read(emu, EMU_HANA_ADC_PADS, &tmp );
/* Set no attenuation on Audio Dock pads. */
snd_emu1010_fpga_write(emu, EMU_HANA_ADC_PADS, 0x00 );
EMU_DST_ALICE2_EMU32_6, EMU_SRC_DOCK_ADC2_LEFT1);
snd_emu1010_fpga_link_dst_src_write(emu,
EMU_DST_ALICE2_EMU32_7, EMU_SRC_DOCK_ADC2_RIGHT1);
+ /* Pavel Hofman - setting defaults for 8 more capture channels
+ * Defaults only, users will set their own values anyways, let's
+ * just copy/paste.
+ */
+
+ snd_emu1010_fpga_link_dst_src_write(emu,
+ EMU_DST_ALICE2_EMU32_8, EMU_SRC_DOCK_MIC_A1);
+ snd_emu1010_fpga_link_dst_src_write(emu,
+ EMU_DST_ALICE2_EMU32_9, EMU_SRC_DOCK_MIC_B1);
+ snd_emu1010_fpga_link_dst_src_write(emu,
+ EMU_DST_ALICE2_EMU32_A, EMU_SRC_HAMOA_ADC_LEFT2);
+ snd_emu1010_fpga_link_dst_src_write(emu,
+ EMU_DST_ALICE2_EMU32_B, EMU_SRC_HAMOA_ADC_LEFT2);
+ snd_emu1010_fpga_link_dst_src_write(emu,
+ EMU_DST_ALICE2_EMU32_C, EMU_SRC_DOCK_ADC1_LEFT1);
+ snd_emu1010_fpga_link_dst_src_write(emu,
+ EMU_DST_ALICE2_EMU32_D, EMU_SRC_DOCK_ADC1_RIGHT1);
+ snd_emu1010_fpga_link_dst_src_write(emu,
+ EMU_DST_ALICE2_EMU32_E, EMU_SRC_DOCK_ADC2_LEFT1);
+ snd_emu1010_fpga_link_dst_src_write(emu,
+ EMU_DST_ALICE2_EMU32_F, EMU_SRC_DOCK_ADC2_RIGHT1);
#endif
#if 0
/* Original */
snd_emu1010_fpga_read(emu, EMU_HANA_SPDIF_MODE, &tmp );
snd_emu1010_fpga_write(emu, EMU_HANA_SPDIF_MODE, 0x10 ); /* SPDIF Format spdif (or 0x11 for aes/ebu) */
- /* Delay to allow Audio Dock to settle */
- msleep(100);
- snd_emu1010_fpga_read(emu, EMU_HANA_IRQ_STATUS, &tmp ); /* IRQ Status */
- snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, ® ); /* OPTIONS: Which cards are attached to the EMU */
- /* FIXME: The loading of this should be able to happen any time,
- * as the user can plug/unplug it at any time
- */
- if (reg & (EMU_HANA_OPTION_DOCK_ONLINE | EMU_HANA_OPTION_DOCK_OFFLINE) ) {
- /* Audio Dock attached */
- /* Return to Audio Dock programming mode */
- snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware\n");
- snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, EMU_HANA_FPGA_CONFIG_AUDIODOCK );
- if ((err = snd_emu1010_load_firmware(emu, DOCK_FILENAME)) != 0) {
- return err;
- }
- snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, 0 );
- snd_emu1010_fpga_read(emu, EMU_HANA_IRQ_STATUS, ® );
- snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_IRQ_STATUS=0x%x\n",reg);
- /* ID, should read & 0x7f = 0x55 when FPGA programmed. */
- snd_emu1010_fpga_read(emu, EMU_HANA_ID, ® );
- snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_ID=0x%x\n",reg);
- if (reg != 0x55) {
- /* FPGA failed to be programmed */
- snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware file failed, reg=0x%x\n", reg);
- return 0;
- return -ENODEV;
- }
- snd_printk(KERN_INFO "emu1010: Audio Dock Firmware loaded\n");
- snd_emu1010_fpga_read(emu, EMU_DOCK_MAJOR_REV, &tmp );
- snd_emu1010_fpga_read(emu, EMU_DOCK_MINOR_REV, &tmp2 );
- snd_printk("Audio Dock ver:%d.%d\n",tmp ,tmp2);
- }
+ /* Start Micro/Audio Dock firmware loader thread */
+ emu->emu1010.firmware_thread = kthread_create(&emu1010_firmware_thread,
+ emu,
+ "emu1010_firmware");
+ wake_up_process(emu->emu1010.firmware_thread);
+
#if 0
snd_emu1010_fpga_link_dst_src_write(emu,
EMU_DST_HAMOA_DAC_LEFT1, EMU_SRC_ALICE_EMU32B + 2); /* ALICE2 bus 0xa2 */
emu->emu1010.output_source[23] = 28;
/* TEMP: Select SPDIF in/out */
- snd_emu1010_fpga_write(emu, EMU_HANA_OPTICAL_TYPE, 0x0); /* Output spdif */
+ //snd_emu1010_fpga_write(emu, EMU_HANA_OPTICAL_TYPE, 0x0); /* Output spdif */
/* TEMP: Select 48kHz SPDIF out */
snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, 0x0); /* Mute all */
if (emu->card_capabilities->emu1010) {
/* Disable 48Volt power to Audio Dock */
snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, 0 );
+ kthread_stop(emu->emu1010.firmware_thread);
}
if (emu->memhdr)
snd_util_memhdr_free(emu->memhdr);
.emu10k2_chip = 1,
.ca0108_chip = 1,
.ca_cardbus_chip = 1,
- .spi_dac = 1,
- .i2c_adc = 1,
- .spk71 = 1} ,
+ .spk71 = 1 ,
+ .emu1010 = 3} ,
+ {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40041102,
+ .driver = "Audigy2", .name = "E-mu 1010b PCI [MAEM????]",
+ .id = "EMU1010",
+ .emu10k2_chip = 1,
+ .ca0108_chip = 1,
+ .spk71 = 1 ,
+ .emu1010 = 2} ,
{.vendor = 0x1102, .device = 0x0008,
.driver = "Audigy2", .name = "Audigy 2 Value [Unknown]",
.id = "Audigy2",
goto error;
}
- emu->page_ptr_table = (void **)vmalloc(emu->max_cache_pages * sizeof(void*));
- emu->page_addr_table = (unsigned long*)vmalloc(emu->max_cache_pages * sizeof(unsigned long));
+ emu->page_ptr_table = vmalloc(emu->max_cache_pages * sizeof(void *));
+ emu->page_addr_table = vmalloc(emu->max_cache_pages *
+ sizeof(unsigned long));
if (emu->page_ptr_table == NULL || emu->page_addr_table == NULL) {
err = -ENOMEM;
goto error;
emu->fx8010.extout_mask = extout_mask;
emu->enable_ir = enable_ir;
+ if (emu->card_capabilities->ca_cardbus_chip) {
+ if ((err = snd_emu10k1_cardbus_init(emu)) < 0)
+ goto error;
+ }
if (emu->card_capabilities->ecard) {
if ((err = snd_emu10k1_ecard_init(emu)) < 0)
goto error;
- } else if (emu->card_capabilities->ca_cardbus_chip) {
- if ((err = snd_emu10k1_cardbus_init(emu)) < 0)
- goto error;
} else if (emu->card_capabilities->emu1010) {
if ((err = snd_emu10k1_emu1010_init(emu)) < 0) {
snd_emu10k1_free(emu);
void snd_emu10k1_resume_init(struct snd_emu10k1 *emu)
{
+ if (emu->card_capabilities->ca_cardbus_chip)
+ snd_emu10k1_cardbus_init(emu);
if (emu->card_capabilities->ecard)
snd_emu10k1_ecard_init(emu);
- else if (emu->card_capabilities->ca_cardbus_chip)
- snd_emu10k1_cardbus_init(emu);
else if (emu->card_capabilities->emu1010)
snd_emu10k1_emu1010_init(emu);
else
git.openpandora.org / pandora-kernel.git / blobdiff