if (!conf) {
sdata_info(sdata,
"no channel context assigned to vif?, disconnecting\n");
- ieee80211_queue_work(&local->hw,
- &ifmgd->csa_connection_drop_work);
- mutex_unlock(&local->chanctx_mtx);
- mutex_unlock(&local->mtx);
- return;
+ goto drop_connection;
}
chanctx = container_of(conf, struct ieee80211_chanctx, conf);
!(local->hw.flags & IEEE80211_HW_CHANCTX_STA_CSA)) {
sdata_info(sdata,
"driver doesn't support chan-switch with channel contexts\n");
- ieee80211_queue_work(&local->hw,
- &ifmgd->csa_connection_drop_work);
- mutex_unlock(&local->chanctx_mtx);
- mutex_unlock(&local->mtx);
- return;
+ goto drop_connection;
}
ch_switch.timestamp = timestamp;
if (drv_pre_channel_switch(sdata, &ch_switch)) {
sdata_info(sdata,
"preparing for channel switch failed, disconnecting\n");
- ieee80211_queue_work(&local->hw,
- &ifmgd->csa_connection_drop_work);
- mutex_unlock(&local->chanctx_mtx);
- mutex_unlock(&local->mtx);
- return;
+ goto drop_connection;
}
res = ieee80211_vif_reserve_chanctx(sdata, &csa_ie.chandef,
sdata_info(sdata,
"failed to reserve channel context for channel switch, disconnecting (err=%d)\n",
res);
- ieee80211_queue_work(&local->hw,
- &ifmgd->csa_connection_drop_work);
- mutex_unlock(&local->chanctx_mtx);
- mutex_unlock(&local->mtx);
- return;
+ goto drop_connection;
}
mutex_unlock(&local->chanctx_mtx);
mod_timer(&ifmgd->chswitch_timer,
TU_TO_EXP_TIME((csa_ie.count - 1) *
cbss->beacon_interval));
+ return;
+ drop_connection:
+ ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work);
+ mutex_unlock(&local->chanctx_mtx);
+ mutex_unlock(&local->mtx);
}
static bool
{
struct ieee80211_local *local = (void *) data;
- if (local->quiescing || local->suspended)
- return;
-
ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work);
}
rate_control_rate_init(sta);
- if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED)
+ if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) {
set_sta_flag(sta, WLAN_STA_MFP);
+ sta->sta.mfp = true;
+ } else {
+ sta->sta.mfp = false;
+ }
sta->sta.wme = elems.wmm_param;
if (ifmgd->csa_waiting_bcn)
ieee80211_chswitch_post_beacon(sdata);
+ /*
+ * Update beacon timing and dtim count on every beacon appearance. This
+ * will allow the driver to use the most updated values. Do it before
+ * comparing this one with last received beacon.
+ * IMPORTANT: These parameters would possibly be out of sync by the time
+ * the driver will use them. The synchronized view is currently
+ * guaranteed only in certain callbacks.
+ */
+ if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) {
+ sdata->vif.bss_conf.sync_tsf =
+ le64_to_cpu(mgmt->u.beacon.timestamp);
+ sdata->vif.bss_conf.sync_device_ts =
+ rx_status->device_timestamp;
+ if (elems.tim)
+ sdata->vif.bss_conf.sync_dtim_count =
+ elems.tim->dtim_count;
+ else
+ sdata->vif.bss_conf.sync_dtim_count = 0;
+ }
+
if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid)
return;
ifmgd->beacon_crc = ncrc;
else
bss_conf->dtim_period = 1;
- if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) {
- sdata->vif.bss_conf.sync_tsf =
- le64_to_cpu(mgmt->u.beacon.timestamp);
- sdata->vif.bss_conf.sync_device_ts =
- rx_status->device_timestamp;
- if (elems.tim)
- sdata->vif.bss_conf.sync_dtim_count =
- elems.tim->dtim_count;
- else
- sdata->vif.bss_conf.sync_dtim_count = 0;
- }
-
changed |= BSS_CHANGED_BEACON_INFO;
ifmgd->have_beacon = true;
{
struct ieee80211_sub_if_data *sdata =
(struct ieee80211_sub_if_data *) data;
- struct ieee80211_local *local = sdata->local;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- if (local->quiescing)
- return;
-
if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn)
return;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_local *local = sdata->local;
- if (local->quiescing)
- return;
-
if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn)
return;
IEEE80211_DEAUTH_FRAME_LEN);
}
+ /* This is a bit of a hack - we should find a better and more generic
+ * solution to this. Normally when suspending, cfg80211 will in fact
+ * deauthenticate. However, it doesn't (and cannot) stop an ongoing
+ * auth (not so important) or assoc (this is the problem) process.
+ *
+ * As a consequence, it can happen that we are in the process of both
+ * associating and suspending, and receive an association response
+ * after cfg80211 has checked if it needs to disconnect, but before
+ * we actually set the flag to drop incoming frames. This will then
+ * cause the workqueue flush to process the association response in
+ * the suspend, resulting in a successful association just before it
+ * tries to remove the interface from the driver, which now though
+ * has a channel context assigned ... this results in issues.
+ *
+ * To work around this (for now) simply deauth here again if we're
+ * now connected.
+ */
+ if (ifmgd->associated && !sdata->local->wowlan) {
+ u8 bssid[ETH_ALEN];
+ struct cfg80211_deauth_request req = {
+ .reason_code = WLAN_REASON_DEAUTH_LEAVING,
+ .bssid = bssid,
+ };
+
+ memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
+ ieee80211_mgd_deauth(sdata, &req);
+ }
+
sdata_unlock(sdata);
}
git.openpandora.org / pandora-kernel.git / blobdiff