/*
- * Copyright (c) 2008 open80211s Ltd.
+ * Copyright (c) 2008, 2009 open80211s Ltd.
* Authors: Luis Carlos Cobo <luisca@cozybit.com>
* Javier Cardona <javier@cozybit.com>
*
#define IEEE80211_MESH_PEER_INACTIVITY_LIMIT (1800 * HZ)
#define IEEE80211_MESH_HOUSEKEEPING_INTERVAL (60 * HZ)
+#define IEEE80211_MESH_RANN_INTERVAL (1 * HZ)
#define MESHCONF_PP_OFFSET 0 /* Path Selection Protocol */
#define MESHCONF_PM_OFFSET 1 /* Path Selection Metric */
#define TMR_RUNNING_HK 0
#define TMR_RUNNING_MP 1
+#define TMR_RUNNING_MPR 2
int mesh_allocated;
static struct kmem_cache *rm_cache;
struct ieee80211_supported_band *sband;
u8 *pos;
int len, i, rate;
+ u8 neighbors;
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
len = sband->n_bitrates;
}
}
+ if (sband->band == IEEE80211_BAND_2GHZ) {
+ pos = skb_put(skb, 2 + 1);
+ *pos++ = WLAN_EID_DS_PARAMS;
+ *pos++ = 1;
+ *pos++ = ieee80211_frequency_to_channel(local->hw.conf.channel->center_freq);
+ }
+
pos = skb_put(skb, 2 + sdata->u.mesh.mesh_id_len);
*pos++ = WLAN_EID_MESH_ID;
*pos++ = sdata->u.mesh.mesh_id_len;
/* Authentication Protocol identifier */
*pos++ = sdata->u.mesh.mesh_auth_id;
- /* Mesh Formation Info */
- memset(pos, 0x00, 1);
- pos += 1;
+ /* Mesh Formation Info - number of neighbors */
+ neighbors = atomic_read(&sdata->u.mesh.mshstats.estab_plinks);
+ /* Number of neighbor mesh STAs or 15 whichever is smaller */
+ neighbors = (neighbors > 15) ? 15 : neighbors;
+ *pos++ = neighbors << 1;
/* Mesh capability */
sdata->u.mesh.accepting_plinks = mesh_plink_availables(sdata);
ieee80211_queue_work(&local->hw, &ifmsh->work);
}
+static void ieee80211_mesh_path_root_timer(unsigned long data)
+{
+ struct ieee80211_sub_if_data *sdata =
+ (struct ieee80211_sub_if_data *) data;
+ struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+ struct ieee80211_local *local = sdata->local;
+
+ set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
+
+ if (local->quiescing) {
+ set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running);
+ return;
+ }
+
+ ieee80211_queue_work(&local->hw, &ifmsh->work);
+}
+
+void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh)
+{
+ if (ifmsh->mshcfg.dot11MeshHWMPRootMode)
+ set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
+ else {
+ clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
+ /* stop running timer */
+ del_timer_sync(&ifmsh->mesh_path_root_timer);
+ }
+}
+
/**
* ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame
* @hdr: 802.11 frame header
*
* Return the length of the 802.11 (does not include a mesh control header)
*/
-int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc, char
- *meshda, char *meshsa) {
+int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc,
+ const u8 *meshda, const u8 *meshsa)
+{
if (is_multicast_ether_addr(meshda)) {
*fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
/* DA TA SA */
round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL));
}
+static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+
+ mesh_path_tx_root_frame(sdata);
+ mod_timer(&ifmsh->mesh_path_root_timer,
+ round_jiffies(jiffies + IEEE80211_MESH_RANN_INTERVAL));
+}
+
#ifdef CONFIG_PM
void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata)
{
set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
if (del_timer_sync(&ifmsh->mesh_path_timer))
set_bit(TMR_RUNNING_MP, &ifmsh->timers_running);
+ if (del_timer_sync(&ifmsh->mesh_path_root_timer))
+ set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running);
}
void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata)
add_timer(&ifmsh->housekeeping_timer);
if (test_and_clear_bit(TMR_RUNNING_MP, &ifmsh->timers_running))
add_timer(&ifmsh->mesh_path_timer);
+ if (test_and_clear_bit(TMR_RUNNING_MPR, &ifmsh->timers_running))
+ add_timer(&ifmsh->mesh_path_root_timer);
+ ieee80211_mesh_root_setup(ifmsh);
}
#endif
struct ieee80211_local *local = sdata->local;
set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
+ ieee80211_mesh_root_setup(ifmsh);
ieee80211_queue_work(&local->hw, &ifmsh->work);
sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL;
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON |
void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
{
del_timer_sync(&sdata->u.mesh.housekeeping_timer);
+ del_timer_sync(&sdata->u.mesh.mesh_path_root_timer);
/*
* If the timer fired while we waited for it, it will have
* requeued the work. Now the work will be running again
struct ieee80211_rx_status *rx_status)
{
switch (mgmt->u.action.category) {
- case PLINK_CATEGORY:
+ case MESH_PLINK_CATEGORY:
mesh_rx_plink_frame(sdata, mgmt, len, rx_status);
break;
case MESH_PATH_SEL_CATEGORY:
if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags))
ieee80211_mesh_housekeeping(sdata, ifmsh);
+
+ if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags))
+ ieee80211_mesh_rootpath(sdata);
}
void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local)
MESH_MIN_DISCOVERY_TIMEOUT;
ifmsh->accepting_plinks = true;
ifmsh->preq_id = 0;
- ifmsh->dsn = 0;
+ ifmsh->sn = 0;
atomic_set(&ifmsh->mpaths, 0);
mesh_rmc_init(sdata);
ifmsh->last_preq = jiffies;
setup_timer(&ifmsh->mesh_path_timer,
ieee80211_mesh_path_timer,
(unsigned long) sdata);
+ setup_timer(&ifmsh->mesh_path_root_timer,
+ ieee80211_mesh_path_root_timer,
+ (unsigned long) sdata);
INIT_LIST_HEAD(&ifmsh->preq_queue.list);
spin_lock_init(&ifmsh->mesh_preq_queue_lock);
}
git.openpandora.org / pandora-kernel.git / blobdiff