tvec_base_t boot_tvec_bases;
EXPORT_SYMBOL(boot_tvec_bases);
-static DEFINE_PER_CPU(tvec_base_t *, tvec_bases) = { &boot_tvec_bases };
+static DEFINE_PER_CPU(tvec_base_t *, tvec_bases) = &boot_tvec_bases;
static inline void set_running_timer(tvec_base_t *base,
struct timer_list *timer)
int ret = try_to_del_timer_sync(timer);
if (ret >= 0)
return ret;
+ cpu_relax();
}
}
* This function cascades all vectors and executes all expired timer
* vectors.
*/
-#define INDEX(N) (base->timer_jiffies >> (TVR_BITS + N * TVN_BITS)) & TVN_MASK
+#define INDEX(N) ((base->timer_jiffies >> (TVR_BITS + (N) * TVN_BITS)) & TVN_MASK)
static inline void __run_timers(tvec_base_t *base)
{
set_normalized_timespec(&xtime, sec, nsec);
set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+ clock->error = 0;
ntp_clear();
write_sequnlock_irqrestore(&xtime_lock, flags);
}
+static int timekeeping_suspended;
/*
* timekeeping_resume - Resumes the generic timekeeping subsystem.
* @dev: unused
write_seqlock_irqsave(&xtime_lock, flags);
/* restart the last cycle value */
clock->cycle_last = clocksource_read(clock);
+ clock->error = 0;
+ timekeeping_suspended = 0;
+ write_sequnlock_irqrestore(&xtime_lock, flags);
+ return 0;
+}
+
+static int timekeeping_suspend(struct sys_device *dev, pm_message_t state)
+{
+ unsigned long flags;
+
+ write_seqlock_irqsave(&xtime_lock, flags);
+ timekeeping_suspended = 1;
write_sequnlock_irqrestore(&xtime_lock, flags);
return 0;
}
/* sysfs resume/suspend bits for timekeeping */
static struct sysdev_class timekeeping_sysclass = {
.resume = timekeeping_resume,
+ .suspend = timekeeping_suspend,
set_kset_name("timekeeping"),
};
device_initcall(timekeeping_init_device);
/*
- * If the error is already larger, we look ahead another tick,
+ * If the error is already larger, we look ahead even further
* to compensate for late or lost adjustments.
*/
-static __always_inline int clocksource_bigadjust(int sign, s64 error, s64 *interval, s64 *offset)
+static __always_inline int clocksource_bigadjust(s64 error, s64 *interval, s64 *offset)
{
- int adj;
+ s64 tick_error, i;
+ u32 look_ahead, adj;
+ s32 error2, mult;
/*
- * As soon as the machine is synchronized to the external time
- * source this should be the common case.
+ * Use the current error value to determine how much to look ahead.
+ * The larger the error the slower we adjust for it to avoid problems
+ * with losing too many ticks, otherwise we would overadjust and
+ * produce an even larger error. The smaller the adjustment the
+ * faster we try to adjust for it, as lost ticks can do less harm
+ * here. This is tuned so that an error of about 1 msec is adusted
+ * within about 1 sec (or 2^20 nsec in 2^SHIFT_HZ ticks).
*/
- error >>= 2;
- if (likely(sign > 0 ? error <= *interval : error >= *interval))
- return sign;
+ error2 = clock->error >> (TICK_LENGTH_SHIFT + 22 - 2 * SHIFT_HZ);
+ error2 = abs(error2);
+ for (look_ahead = 0; error2 > 0; look_ahead++)
+ error2 >>= 2;
/*
- * An extra look ahead dampens the effect of the current error,
- * which can grow quite large with continously late updates, as
- * it would dominate the adjustment value and can lead to
- * oscillation.
+ * Now calculate the error in (1 << look_ahead) ticks, but first
+ * remove the single look ahead already included in the error.
*/
- error += current_tick_length() >> (TICK_LENGTH_SHIFT - clock->shift + 1);
- error -= clock->xtime_interval >> 1;
-
- adj = 0;
- while (1) {
- error >>= 1;
- if (sign > 0 ? error <= *interval : error >= *interval)
- break;
- adj++;
+ tick_error = current_tick_length() >> (TICK_LENGTH_SHIFT - clock->shift + 1);
+ tick_error -= clock->xtime_interval >> 1;
+ error = ((error - tick_error) >> look_ahead) + tick_error;
+
+ /* Finally calculate the adjustment shift value. */
+ i = *interval;
+ mult = 1;
+ if (error < 0) {
+ error = -error;
+ *interval = -*interval;
+ *offset = -*offset;
+ mult = -1;
}
-
- /*
- * Add the current adjustments to the error and take the offset
- * into account, the latter can cause the error to be hardly
- * reduced at the next tick. Check the error again if there's
- * room for another adjustment, thus further reducing the error
- * which otherwise had to be corrected at the next update.
- */
- error = (error << 1) - *interval + *offset;
- if (sign > 0 ? error > *interval : error < *interval)
- adj++;
+ for (adj = 0; error > i; adj++)
+ error >>= 1;
*interval <<= adj;
*offset <<= adj;
- return sign << adj;
+ return mult << adj;
}
/*
error = clock->error >> (TICK_LENGTH_SHIFT - clock->shift - 1);
if (error > interval) {
- adj = clocksource_bigadjust(1, error, &interval, &offset);
+ error >>= 2;
+ if (likely(error <= interval))
+ adj = 1;
+ else
+ adj = clocksource_bigadjust(error, &interval, &offset);
} else if (error < -interval) {
- interval = -interval;
- offset = -offset;
- adj = clocksource_bigadjust(-1, error, &interval, &offset);
+ error >>= 2;
+ if (likely(error >= -interval)) {
+ adj = -1;
+ interval = -interval;
+ offset = -offset;
+ } else
+ adj = clocksource_bigadjust(error, &interval, &offset);
} else
return;
{
cycle_t offset;
- clock->xtime_nsec += (s64)xtime.tv_nsec << clock->shift;
+ /* Make sure we're fully resumed: */
+ if (unlikely(timekeeping_suspended))
+ return;
#ifdef CONFIG_GENERIC_TIME
offset = (clocksource_read(clock) - clock->cycle_last) & clock->mask;
#else
offset = clock->cycle_interval;
#endif
+ clock->xtime_nsec += (s64)xtime.tv_nsec << clock->shift;
/* normally this loop will run just once, however in the
* case of lost or late ticks, it will accumulate correctly.
clocksource_adjust(clock, offset);
/* store full nanoseconds into xtime */
- xtime.tv_nsec = clock->xtime_nsec >> clock->shift;
+ xtime.tv_nsec = (s64)clock->xtime_nsec >> clock->shift;
clock->xtime_nsec -= (s64)xtime.tv_nsec << clock->shift;
/* check to see if there is a new clocksource to use */
}
/*
- * Accessing ->group_leader->real_parent is not SMP-safe, it could
- * change from under us. However, rather than getting any lock
- * we can use an optimistic algorithm: get the parent
- * pid, and go back and check that the parent is still
- * the same. If it has changed (which is extremely unlikely
- * indeed), we just try again..
- *
- * NOTE! This depends on the fact that even if we _do_
- * get an old value of "parent", we can happily dereference
- * the pointer (it was and remains a dereferencable kernel pointer
- * no matter what): we just can't necessarily trust the result
- * until we know that the parent pointer is valid.
- *
- * NOTE2: ->group_leader never changes from under us.
+ * Accessing ->real_parent is not SMP-safe, it could
+ * change from under us. However, we can use a stale
+ * value of ->real_parent under rcu_read_lock(), see
+ * release_task()->call_rcu(delayed_put_task_struct).
*/
asmlinkage long sys_getppid(void)
{
int pid;
- struct task_struct *me = current;
- struct task_struct *parent;
- parent = me->group_leader->real_parent;
- for (;;) {
- pid = parent->tgid;
-#if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT)
-{
- struct task_struct *old = parent;
+ rcu_read_lock();
+ pid = rcu_dereference(current->real_parent)->tgid;
+ rcu_read_unlock();
- /*
- * Make sure we read the pid before re-reading the
- * parent pointer:
- */
- smp_rmb();
- parent = me->group_leader->real_parent;
- if (old != parent)
- continue;
-}
-#endif
- break;
- }
return pid;
}
static void process_timeout(unsigned long __data)
{
- wake_up_process((task_t *)__data);
+ wake_up_process((struct task_struct *)__data);
}
/**
}
#endif /* CONFIG_HOTPLUG_CPU */
-static int __devinit timer_cpu_notify(struct notifier_block *self,
+static int __cpuinit timer_cpu_notify(struct notifier_block *self,
unsigned long action, void *hcpu)
{
long cpu = (long)hcpu;
return NOTIFY_OK;
}
-static struct notifier_block __devinitdata timers_nb = {
+static struct notifier_block __cpuinitdata timers_nb = {
.notifier_call = timer_cpu_notify,
};
git.openpandora.org / pandora-kernel.git / blobdiff