* @seq_len: length of @seq.
*/
struct key_params {
- u8 *key;
- u8 *seq;
+ const u8 *key;
+ const u8 *seq;
int key_len;
int seq_len;
u32 cipher;
*
* @chandef: defines the channel to use after the switch
* @beacon_csa: beacon data while performing the switch
- * @counter_offset_beacon: offset for the counter within the beacon (tail)
- * @counter_offset_presp: offset for the counter within the probe response
+ * @counter_offsets_beacon: offsets of the counters within the beacon (tail)
+ * @counter_offsets_presp: offsets of the counters within the probe response
+ * @n_counter_offsets_beacon: number of csa counters the beacon (tail)
+ * @n_counter_offsets_presp: number of csa counters in the probe response
* @beacon_after: beacon data to be used on the new channel
* @radar_required: whether radar detection is required on the new channel
* @block_tx: whether transmissions should be blocked while changing
struct cfg80211_csa_settings {
struct cfg80211_chan_def chandef;
struct cfg80211_beacon_data beacon_csa;
- u16 counter_offset_beacon, counter_offset_presp;
+ const u16 *counter_offsets_beacon;
+ const u16 *counter_offsets_presp;
+ unsigned int n_counter_offsets_beacon;
+ unsigned int n_counter_offsets_presp;
struct cfg80211_beacon_data beacon_after;
bool radar_required;
bool block_tx;
int use_cts_prot;
int use_short_preamble;
int use_short_slot_time;
- u8 *basic_rates;
+ const u8 *basic_rates;
u8 basic_rates_len;
int ap_isolate;
int ht_opmode;
* @ht_capa_mask: The bits of ht_capa which are to be used.
*/
struct cfg80211_ibss_params {
- u8 *ssid;
- u8 *bssid;
+ const u8 *ssid;
+ const u8 *bssid;
struct cfg80211_chan_def chandef;
- u8 *ie;
+ const u8 *ie;
u8 ssid_len, ie_len;
u16 beacon_interval;
u32 basic_rates;
* @pmkid: The PMK material itself.
*/
struct cfg80211_pmksa {
- u8 *bssid;
- u8 *pmkid;
+ const u8 *bssid;
+ const u8 *pmkid;
};
/**
* memory, free @mask only!
*/
struct cfg80211_pkt_pattern {
- u8 *mask, *pattern;
+ const u8 *mask, *pattern;
int pattern_len;
int pkt_offset;
};
* @len: buffer length
* @no_cck: don't use cck rates for this frame
* @dont_wait_for_ack: tells the low level not to wait for an ack
+ * @n_csa_offsets: length of csa_offsets array
+ * @csa_offsets: array of all the csa offsets in the frame
*/
struct cfg80211_mgmt_tx_params {
struct ieee80211_channel *chan;
size_t len;
bool no_cck;
bool dont_wait_for_ack;
+ int n_csa_offsets;
+ const u16 *csa_offsets;
};
/**
int (*add_station)(struct wiphy *wiphy, struct net_device *dev,
- u8 *mac, struct station_parameters *params);
+ const u8 *mac,
+ struct station_parameters *params);
int (*del_station)(struct wiphy *wiphy, struct net_device *dev,
- u8 *mac);
+ const u8 *mac);
int (*change_station)(struct wiphy *wiphy, struct net_device *dev,
- u8 *mac, struct station_parameters *params);
+ const u8 *mac,
+ struct station_parameters *params);
int (*get_station)(struct wiphy *wiphy, struct net_device *dev,
- u8 *mac, struct station_info *sinfo);
+ const u8 *mac, struct station_info *sinfo);
int (*dump_station)(struct wiphy *wiphy, struct net_device *dev,
- int idx, u8 *mac, struct station_info *sinfo);
+ int idx, u8 *mac, struct station_info *sinfo);
int (*add_mpath)(struct wiphy *wiphy, struct net_device *dev,
- u8 *dst, u8 *next_hop);
+ const u8 *dst, const u8 *next_hop);
int (*del_mpath)(struct wiphy *wiphy, struct net_device *dev,
- u8 *dst);
+ const u8 *dst);
int (*change_mpath)(struct wiphy *wiphy, struct net_device *dev,
- u8 *dst, u8 *next_hop);
+ const u8 *dst, const u8 *next_hop);
int (*get_mpath)(struct wiphy *wiphy, struct net_device *dev,
- u8 *dst, u8 *next_hop,
- struct mpath_info *pinfo);
+ u8 *dst, u8 *next_hop, struct mpath_info *pinfo);
int (*dump_mpath)(struct wiphy *wiphy, struct net_device *dev,
- int idx, u8 *dst, u8 *next_hop,
- struct mpath_info *pinfo);
+ int idx, u8 *dst, u8 *next_hop,
+ struct mpath_info *pinfo);
int (*get_mesh_config)(struct wiphy *wiphy,
struct net_device *dev,
struct mesh_config *conf);
struct cfg80211_gtk_rekey_data *data);
int (*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev,
- u8 *peer, u8 action_code, u8 dialog_token,
+ const u8 *peer, u8 action_code, u8 dialog_token,
u16 status_code, u32 peer_capability,
const u8 *buf, size_t len);
int (*tdls_oper)(struct wiphy *wiphy, struct net_device *dev,
- u8 *peer, enum nl80211_tdls_operation oper);
+ const u8 *peer, enum nl80211_tdls_operation oper);
int (*probe_client)(struct wiphy *wiphy, struct net_device *dev,
const u8 *peer, u64 *cookie);
* between infrastructure and AP types must match. This is required
* only in special cases.
* @radar_detect_widths: bitmap of channel widths supported for radar detection
+ * @radar_detect_regions: bitmap of regions supported for radar detection
*
* With this structure the driver can describe which interface
* combinations it supports concurrently.
u8 n_limits;
bool beacon_int_infra_match;
u8 radar_detect_widths;
+ u8 radar_detect_regions;
};
struct ieee80211_txrx_stypes {
* (including P2P GO) or 0 to indicate no such limit is advertised. The
* driver is allowed to advertise a theoretical limit that it can reach in
* some cases, but may not always reach.
+ *
+ * @max_num_csa_counters: Number of supported csa_counters in beacons
+ * and probe responses. This value should be set if the driver
+ * wishes to limit the number of csa counters. Default (0) means
+ * infinite.
*/
struct wiphy {
/* assign these fields before you register the wiphy */
u16 max_ap_assoc_sta;
+ u8 max_num_csa_counters;
+
char priv[0] __aligned(NETDEV_ALIGN);
};
struct cfg80211_ibss_params ibss;
struct cfg80211_connect_params connect;
struct cfg80211_cached_keys *keys;
- u8 *ie;
+ const u8 *ie;
size_t ie_len;
u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN];
u8 ssid[IEEE80211_MAX_SSID_LEN];
* Return: 0 on success, or a negative error code.
*/
int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr,
- enum nl80211_iftype iftype, u8 *bssid, bool qos);
+ enum nl80211_iftype iftype, const u8 *bssid,
+ bool qos);
/**
* ieee80211_amsdu_to_8023s - decode an IEEE 802.11n A-MSDU frame
* and not try to connect to any AP any more.
*/
void cfg80211_disconnected(struct net_device *dev, u16 reason,
- u8 *ie, size_t ie_len, gfp_t gfp);
+ const u8 *ie, size_t ie_len, gfp_t gfp);
/**
* cfg80211_ready_on_channel - notification of remain_on_channel start
void cfg80211_stop_iface(struct wiphy *wiphy, struct wireless_dev *wdev,
gfp_t gfp);
+/**
+ * cfg80211_shutdown_all_interfaces - shut down all interfaces for a wiphy
+ * @wiphy: the wiphy to shut down
+ *
+ * This function shuts down all interfaces belonging to this wiphy by
+ * calling dev_close() (and treating non-netdev interfaces as needed).
+ * It shouldn't really be used unless there are some fatal device errors
+ * that really can't be recovered in any other way.
+ *
+ * Callers must hold the RTNL and be able to deal with callbacks into
+ * the driver while the function is running.
+ */
+void cfg80211_shutdown_all_interfaces(struct wiphy *wiphy);
+
/* Logging, debugging and troubleshooting/diagnostic helpers. */
/* wiphy_printk helpers, similar to dev_printk */
git.openpandora.org / pandora-kernel.git / blobdiff