* @n_channels: total number of channels to scan
* @ie: optional information element(s) to add into Probe Request or %NULL
* @ie_len: length of ie in octets
+ * @rates: bitmap of rates to advertise for each band
* @wiphy: the wiphy this was for
* @dev: the interface
* @aborted: (internal) scan request was notified as aborted
const u8 *ie;
size_t ie_len;
+ u32 rates[IEEE80211_NUM_BANDS];
+
/* internal */
struct wiphy *wiphy;
struct net_device *dev;
* @magic_pkt: wake up on receiving magic packet
* @patterns: wake up on receiving packet matching a pattern
* @n_patterns: number of patterns
+ * @gtk_rekey_failure: wake up on GTK rekey failure
+ * @eap_identity_req: wake up on EAP identity request packet
+ * @four_way_handshake: wake up on 4-way handshake
+ * @rfkill_release: wake up when rfkill is released
*/
struct cfg80211_wowlan {
- bool any, disconnect, magic_pkt;
+ bool any, disconnect, magic_pkt, gtk_rekey_failure,
+ eap_identity_req, four_way_handshake,
+ rfkill_release;
struct cfg80211_wowlan_trig_pkt_pattern *patterns;
int n_patterns;
};
+/**
+ * struct cfg80211_gtk_rekey_data - rekey data
+ * @kek: key encryption key
+ * @kck: key confirmation key
+ * @replay_ctr: replay counter
+ */
+struct cfg80211_gtk_rekey_data {
+ u8 kek[NL80211_KEK_LEN];
+ u8 kck[NL80211_KCK_LEN];
+ u8 replay_ctr[NL80211_REPLAY_CTR_LEN];
+};
+
/**
* struct cfg80211_ops - backend description for wireless configuration
*
*
* @set_default_mgmt_key: set the default management frame key on an interface
*
+ * @set_rekey_data: give the data necessary for GTK rekeying to the driver
+ *
* @add_beacon: Add a beacon with given parameters, @head, @interval
* and @dtim_period will be valid, @tail is optional.
* @set_beacon: Change the beacon parameters for an access point mode
* frame on another channel
*
* @testmode_cmd: run a test mode command
+ * @testmode_dump: Implement a test mode dump. The cb->args[2] and up may be
+ * used by the function, but 0 and 1 must not be touched. Additionally,
+ * return error codes other than -ENOBUFS and -ENOENT will terminate the
+ * dump and return to userspace with an error, so be careful. If any data
+ * was passed in from userspace then the data/len arguments will be present
+ * and point to the data contained in %NL80211_ATTR_TESTDATA.
*
* @set_bitrate_mask: set the bitrate mask configuration
*
#ifdef CONFIG_NL80211_TESTMODE
int (*testmode_cmd)(struct wiphy *wiphy, void *data, int len);
+ int (*testmode_dump)(struct wiphy *wiphy, struct sk_buff *skb,
+ struct netlink_callback *cb,
+ void *data, int len);
#endif
int (*set_bitrate_mask)(struct wiphy *wiphy,
struct net_device *dev,
struct cfg80211_sched_scan_request *request);
int (*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev);
+
+ int (*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_gtk_rekey_data *data);
};
/*
* @WIPHY_WOWLAN_MAGIC_PKT: supports wakeup on magic packet
* (see nl80211.h)
* @WIPHY_WOWLAN_DISCONNECT: supports wakeup on disconnect
+ * @WIPHY_WOWLAN_SUPPORTS_GTK_REKEY: supports GTK rekeying while asleep
+ * @WIPHY_WOWLAN_GTK_REKEY_FAILURE: supports wakeup on GTK rekey failure
+ * @WIPHY_WOWLAN_EAP_IDENTITY_REQ: supports wakeup on EAP identity request
+ * @WIPHY_WOWLAN_4WAY_HANDSHAKE: supports wakeup on 4-way handshake failure
+ * @WIPHY_WOWLAN_RFKILL_RELEASE: supports wakeup on RF-kill release
*/
enum wiphy_wowlan_support_flags {
- WIPHY_WOWLAN_ANY = BIT(0),
- WIPHY_WOWLAN_MAGIC_PKT = BIT(1),
- WIPHY_WOWLAN_DISCONNECT = BIT(2),
+ WIPHY_WOWLAN_ANY = BIT(0),
+ WIPHY_WOWLAN_MAGIC_PKT = BIT(1),
+ WIPHY_WOWLAN_DISCONNECT = BIT(2),
+ WIPHY_WOWLAN_SUPPORTS_GTK_REKEY = BIT(3),
+ WIPHY_WOWLAN_GTK_REKEY_FAILURE = BIT(4),
+ WIPHY_WOWLAN_EAP_IDENTITY_REQ = BIT(5),
+ WIPHY_WOWLAN_4WAY_HANDSHAKE = BIT(6),
+ WIPHY_WOWLAN_RFKILL_RELEASE = BIT(7),
};
/**
* by default for perm_addr. In this case, the mask should be set to
* all-zeroes. In this case it is assumed that the device can handle
* the same number of arbitrary MAC addresses.
+ * @registered: protects ->resume and ->suspend sysfs callbacks against
+ * unregister hardware
* @debugfsdir: debugfs directory used for this wiphy, will be renamed
* automatically on wiphy renames
* @dev: (virtual) struct device for this wiphy
* this variable determines its size
* @max_scan_ssids: maximum number of SSIDs the device can scan for in
* any given scan
+ * @max_sched_scan_ssids: maximum number of SSIDs the device can scan
+ * for in any given scheduled scan
* @max_scan_ie_len: maximum length of user-controlled IEs device can
* add to probe request frames transmitted during a scan, must not
* include fixed IEs like supported rates
+ * @max_sched_scan_ie_len: same as max_scan_ie_len, but for scheduled
+ * scans
* @coverage_class: current coverage class
* @fw_version: firmware version for ethtool reporting
* @hw_version: hardware version for ethtool reporting
int bss_priv_size;
u8 max_scan_ssids;
+ u8 max_sched_scan_ssids;
u16 max_scan_ie_len;
+ u16 max_sched_scan_ie_len;
int n_cipher_suites;
const u32 *cipher_suites;
* you need use set_wiphy_dev() (see below) */
struct device dev;
+ /* protects ->resume, ->suspend sysfs callbacks against unregister hw */
+ bool registered;
+
/* dir in debugfs: ieee80211/<wiphyname> */
struct dentry *debugfsdir;
void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp);
#define CFG80211_TESTMODE_CMD(cmd) .testmode_cmd = (cmd),
+#define CFG80211_TESTMODE_DUMP(cmd) .testmode_dump = (cmd),
#else
#define CFG80211_TESTMODE_CMD(cmd)
+#define CFG80211_TESTMODE_DUMP(cmd)
#endif
/**
void cfg80211_cqm_pktloss_notify(struct net_device *dev,
const u8 *peer, u32 num_packets, gfp_t gfp);
+/**
+ * cfg80211_gtk_rekey_notify - notify userspace about driver rekeying
+ * @dev: network device
+ * @bssid: BSSID of AP (to avoid races)
+ * @replay_ctr: new replay counter
+ * @gfp: allocation flags
+ */
+void cfg80211_gtk_rekey_notify(struct net_device *dev, const u8 *bssid,
+ const u8 *replay_ctr, gfp_t gfp);
+
/* Logging, debugging and troubleshooting/diagnostic helpers. */
/* wiphy_printk helpers, similar to dev_printk */
git.openpandora.org / pandora-kernel.git / blobdiff