* zero to MAXTC, the PLL will converge in 15 minutes to 16 hours,
* respectively.
*/
-#define SHIFT_KG 6 /* phase factor (shift) */
-#define SHIFT_KF 16 /* PLL frequency factor (shift) */
-#define SHIFT_KH 2 /* FLL frequency factor (shift) */
-#define MAXTC 6 /* maximum time constant (shift) */
+#define SHIFT_PLL 4 /* PLL frequency factor (shift) */
+#define SHIFT_FLL 2 /* FLL frequency factor (shift) */
+#define MAXTC 10 /* maximum time constant (shift) */
/*
- * The SHIFT_SCALE define establishes the decimal point of the time_phase
- * variable which serves as an extension to the low-order bits of the
- * system clock variable. The SHIFT_UPDATE define establishes the decimal
- * point of the time_offset variable which represents the current offset
- * with respect to standard time. The FINENSEC define represents 1 nsec in
- * scaled units.
+ * The SHIFT_UPDATE define establishes the decimal point of the
+ * time_offset variable which represents the current offset with
+ * respect to standard time.
*
* SHIFT_USEC defines the scaling (shift) of the time_freq and
* time_tolerance variables, which represent the current frequency
* offset and maximum frequency tolerance.
- *
- * FINENSEC is 1 ns in SHIFT_UPDATE units of the time_phase variable.
*/
-#define SHIFT_SCALE 22 /* phase scale (shift) */
-#define SHIFT_UPDATE (SHIFT_KG + MAXTC) /* time offset scale (shift) */
+#define SHIFT_UPDATE (SHIFT_HZ + 1) /* time offset scale (shift) */
#define SHIFT_USEC 16 /* frequency offset scale (shift) */
-#define FINENSEC (1L << (SHIFT_SCALE - 10)) /* ~1 ns in phase units */
+#define SHIFT_NSEC 12 /* kernel frequency offset scale */
#define MAXPHASE 512000L /* max phase error (us) */
#define MAXFREQ (512L << SHIFT_USEC) /* max frequency error (ppm) */
-#define MINSEC 16L /* min interval between updates (s) */
-#define MAXSEC 1200L /* max interval between updates (s) */
+#define MAXFREQ_NSEC (512000L << SHIFT_NSEC) /* max frequency error (ppb) */
+#define MINSEC 256 /* min interval between updates (s) */
+#define MAXSEC 2048 /* max interval between updates (s) */
#define NTP_PHASE_LIMIT (MAXPHASE << 5) /* beyond max. dispersion */
/*
/*
* phase-lock loop variables
*/
-extern int time_state; /* clock status */
extern int time_status; /* clock synchronization status bits */
-extern long time_offset; /* time adjustment (us) */
-extern long time_constant; /* pll time constant */
-extern long time_tolerance; /* frequency tolerance (ppm) */
-extern long time_precision; /* clock precision (us) */
extern long time_maxerror; /* maximum error */
extern long time_esterror; /* estimated error */
extern long time_freq; /* frequency offset (scaled ppm) */
-extern long time_reftime; /* time at last adjustment (s) */
extern long time_adjust; /* The amount of adjtime left */
-extern long time_next_adjust; /* Value for time_adjust at next tick */
-/**
- * ntp_clear - Clears the NTP state variables
- *
- * Must be called while holding a write on the xtime_lock
- */
-static inline void ntp_clear(void)
-{
- time_adjust = 0; /* stop active adjtime() */
- time_status |= STA_UNSYNC;
- time_maxerror = NTP_PHASE_LIMIT;
- time_esterror = NTP_PHASE_LIMIT;
-}
+extern void ntp_clear(void);
/**
* ntp_synced - Returns 1 if the NTP status is not UNSYNC
__x < 0 ? -(-__x >> __s) : __x >> __s; \
})
-
-#ifdef CONFIG_TIME_INTERPOLATION
-
-#define TIME_SOURCE_CPU 0
-#define TIME_SOURCE_MMIO64 1
-#define TIME_SOURCE_MMIO32 2
-#define TIME_SOURCE_FUNCTION 3
-
-/* For proper operations time_interpolator clocks must run slightly slower
- * than the standard clock since the interpolator may only correct by having
- * time jump forward during a tick. A slower clock is usually a side effect
- * of the integer divide of the nanoseconds in a second by the frequency.
- * The accuracy of the division can be increased by specifying a shift.
- * However, this may cause the clock not to be slow enough.
- * The interpolator will self-tune the clock by slowing down if no
- * resets occur or speeding up if the time jumps per analysis cycle
- * become too high.
- *
- * Setting jitter compensates for a fluctuating timesource by comparing
- * to the last value read from the timesource to insure that an earlier value
- * is not returned by a later call. The price to pay
- * for the compensation is that the timer routines are not as scalable anymore.
- */
-
-struct time_interpolator {
- u16 source; /* time source flags */
- u8 shift; /* increases accuracy of multiply by shifting. */
- /* Note that bits may be lost if shift is set too high */
- u8 jitter; /* if set compensate for fluctuations */
- u32 nsec_per_cyc; /* set by register_time_interpolator() */
- void *addr; /* address of counter or function */
- u64 mask; /* mask the valid bits of the counter */
- unsigned long offset; /* nsec offset at last update of interpolator */
- u64 last_counter; /* counter value in units of the counter at last update */
- u64 last_cycle; /* Last timer value if TIME_SOURCE_JITTER is set */
- u64 frequency; /* frequency in counts/second */
- long drift; /* drift in parts-per-million (or -1) */
- unsigned long skips; /* skips forward */
- unsigned long ns_skipped; /* nanoseconds skipped */
- struct time_interpolator *next;
-};
-
-extern void register_time_interpolator(struct time_interpolator *);
-extern void unregister_time_interpolator(struct time_interpolator *);
-extern void time_interpolator_reset(void);
-extern unsigned long time_interpolator_get_offset(void);
-extern void time_interpolator_update(long delta_nsec);
-
-#else /* !CONFIG_TIME_INTERPOLATION */
-
-static inline void time_interpolator_reset(void)
-{
-}
-
-static inline void time_interpolator_update(long delta_nsec)
-{
-}
-
-#endif /* !CONFIG_TIME_INTERPOLATION */
-
#define TICK_LENGTH_SHIFT 32
+#ifdef CONFIG_NO_HZ
+#define NTP_INTERVAL_FREQ (2)
+#else
+#define NTP_INTERVAL_FREQ (HZ)
+#endif
+#define NTP_INTERVAL_LENGTH (NSEC_PER_SEC/NTP_INTERVAL_FREQ)
+
/* Returns how long ticks are at present, in ns / 2^(SHIFT_SCALE-10). */
extern u64 current_tick_length(void);
extern void update_ntp_one_tick(void);
extern int do_adjtimex(struct timex *);
+/* Don't use! Compatibility define for existing users. */
+#define tickadj (500/HZ ? : 1)
+
#endif /* KERNEL */
#endif /* LINUX_TIMEX_H */
git.openpandora.org / pandora-kernel.git / blobdiff