/* Parisc type numbers. */
#define PORT_MUX 48
-/* Atmel AT91RM9200 SoC */
-#define PORT_AT91RM9200 49
+/* Atmel AT91xxx SoC */
+#define PORT_AT91 49
/* Macintosh Zilog type numbers */
#define PORT_MAC_ZILOG 50 /* m68k : not yet implemented */
/* Hilscher netx */
#define PORT_NETX 71
+/* SUN4V Hypervisor Console */
+#define PORT_SUNHV 72
+
+#define PORT_S3C2412 73
+
+
#ifdef __KERNEL__
-#include <linux/config.h>
#include <linux/compiler.h>
#include <linux/interrupt.h>
#include <linux/circ_buf.h>
__u32 buf_overrun;
};
+typedef unsigned int __bitwise__ upf_t;
+
struct uart_port {
spinlock_t lock; /* port lock */
unsigned int iobase; /* in/out[bwl] */
unsigned char __iomem *membase; /* read/write[bwl] */
unsigned int irq; /* irq number */
unsigned int uartclk; /* base uart clock */
- unsigned char fifosize; /* tx fifo size */
+ unsigned int fifosize; /* tx fifo size */
unsigned char x_char; /* xon/xoff char */
unsigned char regshift; /* reg offset shift */
unsigned char iotype; /* io access style */
+ unsigned char unused1;
#define UPIO_PORT (0)
#define UPIO_HUB6 (1)
unsigned long sysrq; /* sysrq timeout */
#endif
- unsigned int flags;
-
-#define UPF_FOURPORT (1 << 1)
-#define UPF_SAK (1 << 2)
-#define UPF_SPD_MASK (0x1030)
-#define UPF_SPD_HI (0x0010)
-#define UPF_SPD_VHI (0x0020)
-#define UPF_SPD_CUST (0x0030)
-#define UPF_SPD_SHI (0x1000)
-#define UPF_SPD_WARP (0x1010)
-#define UPF_SKIP_TEST (1 << 6)
-#define UPF_AUTO_IRQ (1 << 7)
-#define UPF_HARDPPS_CD (1 << 11)
-#define UPF_LOW_LATENCY (1 << 13)
-#define UPF_BUGGY_UART (1 << 14)
-#define UPF_AUTOPROBE (1 << 15)
-#define UPF_MAGIC_MULTIPLIER (1 << 16)
-#define UPF_BOOT_ONLYMCA (1 << 22)
-#define UPF_CONS_FLOW (1 << 23)
-#define UPF_SHARE_IRQ (1 << 24)
-#define UPF_BOOT_AUTOCONF (1 << 28)
-#define UPF_IOREMAP (1 << 31)
-
-#define UPF_CHANGE_MASK (0x17fff)
-#define UPF_USR_MASK (UPF_SPD_MASK|UPF_LOW_LATENCY)
+ upf_t flags;
+
+#define UPF_FOURPORT ((__force upf_t) (1 << 1))
+#define UPF_SAK ((__force upf_t) (1 << 2))
+#define UPF_SPD_MASK ((__force upf_t) (0x1030))
+#define UPF_SPD_HI ((__force upf_t) (0x0010))
+#define UPF_SPD_VHI ((__force upf_t) (0x0020))
+#define UPF_SPD_CUST ((__force upf_t) (0x0030))
+#define UPF_SPD_SHI ((__force upf_t) (0x1000))
+#define UPF_SPD_WARP ((__force upf_t) (0x1010))
+#define UPF_SKIP_TEST ((__force upf_t) (1 << 6))
+#define UPF_AUTO_IRQ ((__force upf_t) (1 << 7))
+#define UPF_HARDPPS_CD ((__force upf_t) (1 << 11))
+#define UPF_LOW_LATENCY ((__force upf_t) (1 << 13))
+#define UPF_BUGGY_UART ((__force upf_t) (1 << 14))
+#define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16))
+#define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
+#define UPF_SHARE_IRQ ((__force upf_t) (1 << 24))
+#define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28))
+#define UPF_DEAD ((__force upf_t) (1 << 30))
+#define UPF_IOREMAP ((__force upf_t) (1 << 31))
+
+#define UPF_CHANGE_MASK ((__force upf_t) (0x17fff))
+#define UPF_USR_MASK ((__force upf_t) (UPF_SPD_MASK|UPF_LOW_LATENCY))
unsigned int mctrl; /* current modem ctrl settings */
unsigned int timeout; /* character-based timeout */
unsigned int type; /* port type */
- struct uart_ops *ops;
+ const struct uart_ops *ops;
unsigned int custom_divisor;
unsigned int line; /* port index */
unsigned long mapbase; /* for ioremap */
};
#define UART_XMIT_SIZE PAGE_SIZE
+
+typedef unsigned int __bitwise__ uif_t;
+
/*
* This is the state information which is only valid when the port
* is open; it may be freed by the core driver once the device has
struct uart_info {
struct tty_struct *tty;
struct circ_buf xmit;
- unsigned int flags;
+ uif_t flags;
/*
- * These are the flags that specific to info->flags, and reflect our
- * internal state. They can not be accessed via port->flags. Low
- * level drivers must not change these, but may query them instead.
+ * Definitions for info->flags. These are _private_ to serial_core, and
+ * are specific to this structure. They may be queried by low level drivers.
*/
-#define UIF_CHECK_CD (1 << 25)
-#define UIF_CTS_FLOW (1 << 26)
-#define UIF_NORMAL_ACTIVE (1 << 29)
-#define UIF_INITIALIZED (1 << 31)
+#define UIF_CHECK_CD ((__force uif_t) (1 << 25))
+#define UIF_CTS_FLOW ((__force uif_t) (1 << 26))
+#define UIF_NORMAL_ACTIVE ((__force uif_t) (1 << 29))
+#define UIF_INITIALIZED ((__force uif_t) (1 << 31))
int blocked_open;
struct module *owner;
const char *driver_name;
const char *dev_name;
- const char *devfs_name;
int major;
int minor;
int nr;
int uart_set_options(struct uart_port *port, struct console *co, int baud,
int parity, int bits, int flow);
struct tty_driver *uart_console_device(struct console *co, int *index);
+void uart_console_write(struct uart_port *port, const char *s,
+ unsigned int count,
+ void (*putchar)(struct uart_port *, int));
/*
* Port/driver registration/removal
port->sysrq = 0;
}
#endif
- if (info->flags & UPF_SAK)
+ if (port->flags & UPF_SAK)
do_SAK(info->tty);
return 0;
}
git.openpandora.org / pandora-kernel.git / blobdiff