#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_GENERIC_BOARD
/* Generic Interrupt Controller Definitions */
#define CONFIG_GICV2
#define GICD_BASE 0xF9010000
#define GICC_BASE 0xF9020000
-/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_SYS_SDRAM_BASE 0
-#define CONFIG_SYS_SDRAM_SIZE 0x40000000
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_SYS_MEMTEST_SCRATCH 0xfffc0000
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_SDRAM_SIZE
+#ifndef CONFIG_NR_DRAM_BANKS
+# define CONFIG_NR_DRAM_BANKS 2
+#endif
+#define CONFIG_SYS_MEMTEST_START 0
+#define CONFIG_SYS_MEMTEST_END 1000
/* Have release address at the end of 256MB for now */
#define CPU_RELEASE_ADDR 0xFFFFFF0
/* Cache Definitions */
#define CONFIG_SYS_CACHELINE_SIZE 64
-#define CONFIG_IDENT_STRING " Xilinx ZynqMP"
+#if !defined(CONFIG_IDENT_STRING)
+# define CONFIG_IDENT_STRING " Xilinx ZynqMP"
+#endif
-#define CONFIG_SYS_TEXT_BASE 0x8000000
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
/* Flat Device Tree Definitions */
-#define CONFIG_OF_LIBFDT
/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
-#define COUNTER_FREQUENCY 4000000
+#if !defined(COUNTER_FREQUENCY)
+# define COUNTER_FREQUENCY 100000000
+#endif
/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x400000)
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x2000000)
/* Serial setup */
-#define CONFIG_ZYNQ_SERIAL_UART0
+#define CONFIG_ARM_DCC
+#define CONFIG_CPU_ARMV8
#define CONFIG_ZYNQ_SERIAL
#define CONFIG_CONS_INDEX 0
#define CONFIG_SYS_BAUDRATE_TABLE \
{ 4800, 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_ZYNQ_SDHCI0
-
/* Command line configuration */
#define CONFIG_CMD_ENV
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_FS_GENERIC
#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_ELF
#define CONFIG_MP
+#define CONFIG_CMD_MII
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_MAY_FAIL
+#define CONFIG_BOOTP_SERVERIP
+
/* SPI */
#ifdef CONFIG_ZYNQ_SPI
-# define CONFIG_SPI_FLASH_SST
# define CONFIG_CMD_SF
#endif
-#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
+#if defined(CONFIG_ZYNQ_SDHCI)
# define CONFIG_MMC
# define CONFIG_GENERIC_MMC
# define CONFIG_SDHCI
-# define CONFIG_ZYNQ_SDHCI
# define CONFIG_CMD_MMC
+# ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
+# define CONFIG_ZYNQ_SDHCI_MAX_FREQ 200000000
+# endif
#endif
-#if defined(CONFIG_ZYNQ_SDHCI)
+#if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQMP_USB)
# define CONFIG_FAT_WRITE
# define CONFIG_CMD_EXT4_WRITE
#endif
+#ifdef CONFIG_NAND_ARASAN
+# define CONFIG_CMD_NAND
+# define CONFIG_CMD_NAND_LOCK_UNLOCK
+# define CONFIG_SYS_MAX_NAND_DEVICE 1
+# define CONFIG_SYS_NAND_SELF_INIT
+# define CONFIG_SYS_NAND_ONFI_DETECTION
+# define CONFIG_MTD_DEVICE
+#endif
+
/* Miscellaneous configurable options */
#define CONFIG_SYS_LOAD_ADDR 0x8000000
+#if defined(CONFIG_ZYNQMP_USB)
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_XHCI_ZYNQMP
+
+#define CONFIG_USB_DWC3
+#define CONFIG_USB_DWC3_GADGET
+
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000
+#define DFU_DEFAULT_POLL_TIMEOUT 300
+#define CONFIG_USB_FUNCTION_DFU
+#define CONFIG_DFU_RAM
+#define CONFIG_G_DNL_VENDOR_NUM 0x03FD
+#define CONFIG_G_DNL_PRODUCT_NUM 0x0300
+#define CONFIG_G_DNL_MANUFACTURER "Xilinx"
+#define CONFIG_USB_CABLE_CHECK
+#define CONFIG_CMD_DFU
+#define CONFIG_CMD_THOR_DOWNLOAD
+#define CONFIG_USB_FUNCTION_THOR
+#define CONFIG_THOR_RESET_OFF
+#define DFU_ALT_INFO_RAM \
+ "dfu_ram_info=" \
+ "setenv dfu_alt_info " \
+ "Image ram $kernel_addr $kernel_size\\\\;" \
+ "system.dtb ram $fdt_addr $fdt_size\0" \
+ "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
+ "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
+
+#define DFU_ALT_INFO \
+ DFU_ALT_INFO_RAM
+#endif
+
+#if !defined(DFU_ALT_INFO)
+# define DFU_ALT_INFO
+#endif
+
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
"kernel_addr=0x80000\0" \
"fdt_addr=0x7000000\0" \
"fdt_high=0x10000000\0" \
- "sdboot=mmcinfo && load mmc 0:0 $fdt_addr system.dtb && " \
- "load mmc 0:0 $kernel_addr Image && booti $kernel_addr - $fdt_addr\0"
+ "kernel_size=0x2000000\0" \
+ "fdt_size=0x80000\0" \
+ "sdbootdev=0\0"\
+ "sdboot=mmc dev $sdbootdev && mmcinfo && load mmc $sdbootdev:$partid $fdt_addr system.dtb && " \
+ "load mmc $sdbootdev:$partid $kernel_addr Image && " \
+ "booti $kernel_addr - $fdt_addr\0" \
+ DFU_ALT_INFO
-#define CONFIG_BOOTARGS "setenv bootargs console=ttyPS0,${baudrate} " \
- "earlycon=cdns,mmio,0xff000000,${baudrate}n8"
#define CONFIG_PREBOOT "run bootargs"
#define CONFIG_BOOTCOMMAND "run $modeboot"
-#define CONFIG_BOOTDELAY 5
+#define CONFIG_BOOTDELAY 3
#define CONFIG_BOARD_LATE_INIT
/* Monitor Command Prompt */
/* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE 2048
-#define CONFIG_SYS_PROMPT "ZynqMP> "
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_MAXARGS 64
-#define CONFIG_ZYNQ_I2C0
-#define CONFIG_SYS_I2C_ZYNQ
+/* Ethernet driver */
+#if defined(CONFIG_ZYNQ_GEM)
+# define CONFIG_NET_MULTI
+# define CONFIG_MII
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# define CONFIG_PHY_MARVELL
+# define CONFIG_PHY_NATSEMI
+# define CONFIG_PHY_TI
+# define CONFIG_PHY_GIGE
+# define PHY_ANEG_TIMEOUT 20000
+#endif
/* I2C */
#if defined(CONFIG_SYS_I2C_ZYNQ)
# define CONFIG_SYS_I2C_ZYNQ_SLAVE 0
#endif
-#define CONFIG_ZYNQMP_EEPROM
-
/* EEPROM */
#ifdef CONFIG_ZYNQMP_EEPROM
# define CONFIG_CMD_EEPROM
# define CONFIG_SYS_EEPROM_SIZE (64 * 1024)
#endif
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
+#ifdef CONFIG_AHCI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+#define CONFIG_CMD_SCSI
+#endif
#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
git.openpandora.org / pandora-u-boot.git / blobdiff