+++ /dev/null
-/*
- * include/asm-v850/entry.h -- Definitions used by low-level trap handlers
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_ENTRY_H__
-#define __V850_ENTRY_H__
-
-
-#include <asm/ptrace.h>
-#include <asm/machdep.h>
-
-
-/* These are special variables using by the kernel trap/interrupt code
- to save registers in, at a time when there are no spare registers we
- can use to do so, and we can't depend on the value of the stack
- pointer. This means that they must be within a signed 16-bit
- displacement of 0x00000000. */
-
-#define KERNEL_VAR_SPACE_ADDR R0_RAM_ADDR
-
-#ifdef __ASSEMBLY__
-#define KERNEL_VAR(addr) addr[r0]
-#else
-#define KERNEL_VAR(addr) (*(volatile unsigned long *)(addr))
-#endif
-
-/* Kernel stack pointer, 4 bytes. */
-#define KSP_ADDR (KERNEL_VAR_SPACE_ADDR + 0)
-#define KSP KERNEL_VAR (KSP_ADDR)
-/* 1 if in kernel-mode, 0 if in user mode, 1 byte. */
-#define KM_ADDR (KERNEL_VAR_SPACE_ADDR + 4)
-#define KM KERNEL_VAR (KM_ADDR)
-/* Temporary storage for interrupt handlers, 4 bytes. */
-#define INT_SCRATCH_ADDR (KERNEL_VAR_SPACE_ADDR + 8)
-#define INT_SCRATCH KERNEL_VAR (INT_SCRATCH_ADDR)
-/* Where the stack-pointer is saved when jumping to various sorts of
- interrupt handlers. ENTRY_SP is used by everything except NMIs,
- which have their own location. Higher-priority NMIs can clobber the
- value written by a lower priority NMI, since they can't be disabled,
- but that's OK, because only NMI0 (the lowest-priority one) is allowed
- to return. */
-#define ENTRY_SP_ADDR (KERNEL_VAR_SPACE_ADDR + 12)
-#define ENTRY_SP KERNEL_VAR (ENTRY_SP_ADDR)
-#define NMI_ENTRY_SP_ADDR (KERNEL_VAR_SPACE_ADDR + 16)
-#define NMI_ENTRY_SP KERNEL_VAR (NMI_ENTRY_SP_ADDR)
-
-#ifdef CONFIG_RESET_GUARD
-/* Used to detect unexpected resets (since the v850 has no MMU, any call
- through a null pointer will jump to the reset vector). We detect
- such resets by checking for a magic value, RESET_GUARD_ACTIVE, in
- this location. Properly resetting the machine stores zero there, so
- it shouldn't trigger the guard; the power-on value is uncertain, but
- it's unlikely to be RESET_GUARD_ACTIVE. */
-#define RESET_GUARD_ADDR (KERNEL_VAR_SPACE_ADDR + 28)
-#define RESET_GUARD KERNEL_VAR (RESET_GUARD_ADDR)
-#define RESET_GUARD_ACTIVE 0xFAB4BEEF
-#endif /* CONFIG_RESET_GUARD */
-
-#ifdef CONFIG_V850E_HIGHRES_TIMER
-#define HIGHRES_TIMER_SLOW_TICKS_ADDR (KERNEL_VAR_SPACE_ADDR + 32)
-#define HIGHRES_TIMER_SLOW_TICKS KERNEL_VAR (HIGHRES_TIMER_SLOW_TICKS_ADDR)
-#endif /* CONFIG_V850E_HIGHRES_TIMER */
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_RESET_GUARD
-/* Turn off reset guard, so that resetting the machine works normally.
- This should be called in the various machine_halt, etc., functions. */
-static inline void disable_reset_guard (void)
-{
- RESET_GUARD = 0;
-}
-#endif /* CONFIG_RESET_GUARD */
-
-#endif /* !__ASSEMBLY__ */
-
-
-/* A `state save frame' is a struct pt_regs preceded by some extra space
- suitable for a function call stack frame. */
-
-/* Amount of room on the stack reserved for arguments and to satisfy the
- C calling conventions, in addition to the space used by the struct
- pt_regs that actually holds saved values. */
-#define STATE_SAVE_ARG_SPACE (6*4) /* Up to six arguments. */
-
-
-#ifdef __ASSEMBLY__
-
-/* The size of a state save frame. */
-#define STATE_SAVE_SIZE (PT_SIZE + STATE_SAVE_ARG_SPACE)
-
-#else /* !__ASSEMBLY__ */
-
-/* The size of a state save frame. */
-#define STATE_SAVE_SIZE (sizeof (struct pt_regs) + STATE_SAVE_ARG_SPACE)
-
-#endif /* __ASSEMBLY__ */
-
-
-/* Offset of the struct pt_regs in a state save frame. */
-#define STATE_SAVE_PT_OFFSET STATE_SAVE_ARG_SPACE
-
-
-#endif /* __V850_ENTRY_H__ */
git.openpandora.org / pandora-kernel.git / blobdiff