#define HVSC .long 0x44000022
-#define H_Success 0
-#define H_Busy 1 /* Hardware busy -- retry later */
-#define H_Closed 2 /* Resource closed */
-#define H_Constrained 4 /* Resource request constrained to max allowed */
-#define H_InProgress 14 /* Kind of like busy */
-#define H_Pending 17 /* returned from H_POLL_PENDING */
-#define H_Continue 18 /* Returned from H_Join on success */
-#define H_LongBusyStartRange 9900 /* Start of long busy range */
-#define H_LongBusyOrder1msec 9900 /* Long busy, hint that 1msec is a good time to retry */
-#define H_LongBusyOrder10msec 9901 /* Long busy, hint that 10msec is a good time to retry */
-#define H_LongBusyOrder100msec 9902 /* Long busy, hint that 100msec is a good time to retry */
-#define H_LongBusyOrder1sec 9903 /* Long busy, hint that 1sec is a good time to retry */
-#define H_LongBusyOrder10sec 9904 /* Long busy, hint that 10sec is a good time to retry */
-#define H_LongBusyOrder100sec 9905 /* Long busy, hint that 100sec is a good time to retry */
-#define H_LongBusyEndRange 9905 /* End of long busy range */
-#define H_Hardware -1 /* Hardware error */
-#define H_Function -2 /* Function not supported */
-#define H_Privilege -3 /* Caller not privileged */
-#define H_Parameter -4 /* Parameter invalid, out-of-range or conflicting */
-#define H_Bad_Mode -5 /* Illegal msr value */
-#define H_PTEG_Full -6 /* PTEG is full */
-#define H_Not_Found -7 /* PTE was not found" */
-#define H_Reserved_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */
-#define H_NoMem -9
-#define H_Authority -10
-#define H_Permission -11
-#define H_Dropped -12
-#define H_SourceParm -13
-#define H_DestParm -14
-#define H_RemoteParm -15
-#define H_Resource -16
+#define H_SUCCESS 0
+#define H_BUSY 1 /* Hardware busy -- retry later */
+#define H_CLOSED 2 /* Resource closed */
+#define H_NOT_AVAILABLE 3
+#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */
+#define H_PARTIAL 5
+#define H_IN_PROGRESS 14 /* Kind of like busy */
+#define H_PAGE_REGISTERED 15
+#define H_PARTIAL_STORE 16
+#define H_PENDING 17 /* returned from H_POLL_PENDING */
+#define H_CONTINUE 18 /* Returned from H_Join on success */
+#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */
+#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \
+ is a good time to retry */
+#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */
+#define H_HARDWARE -1 /* Hardware error */
+#define H_FUNCTION -2 /* Function not supported */
+#define H_PRIVILEGE -3 /* Caller not privileged */
+#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */
+#define H_BAD_MODE -5 /* Illegal msr value */
+#define H_PTEG_FULL -6 /* PTEG is full */
+#define H_NOT_FOUND -7 /* PTE was not found" */
+#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */
+#define H_NO_MEM -9
+#define H_AUTHORITY -10
+#define H_PERMISSION -11
+#define H_DROPPED -12
+#define H_SOURCE_PARM -13
+#define H_DEST_PARM -14
+#define H_REMOTE_PARM -15
+#define H_RESOURCE -16
+#define H_ADAPTER_PARM -17
+#define H_RH_PARM -18
+#define H_RCQ_PARM -19
+#define H_SCQ_PARM -20
+#define H_EQ_PARM -21
+#define H_RT_PARM -22
+#define H_ST_PARM -23
+#define H_SIGT_PARM -24
+#define H_TOKEN_PARM -25
+#define H_MLENGTH_PARM -27
+#define H_MEM_PARM -28
+#define H_MEM_ACCESS_PARM -29
+#define H_ATTR_PARM -30
+#define H_PORT_PARM -31
+#define H_MCG_PARM -32
+#define H_VL_PARM -33
+#define H_TSIZE_PARM -34
+#define H_TRACE_PARM -35
+
+#define H_MASK_PARM -37
+#define H_MCG_FULL -38
+#define H_ALIAS_EXIST -39
+#define H_P_COUNTER -40
+#define H_TABLE_FULL -41
+#define H_ALT_TABLE -42
+#define H_MR_CONDITION -43
+#define H_NOT_ENOUGH_RESOURCES -44
+#define H_R_STATE -45
+#define H_RESCINDEND -46
+
/* Long Busy is a condition that can be returned by the firmware
* when a call cannot be completed now, but the identical call
* should be retried later. This prevents calls blocking in the
- * firmware for long periods of time. Annoyingly the firmware can return
+ * firmware for long periods of time. Annoyingly the firmware can return
* a range of return codes, hinting at how long we should wait before
* retrying. If you don't care for the hint, the macro below is a good
* way to check for the long_busy return codes
*/
-#define H_isLongBusy(x) ((x >= H_LongBusyStartRange) && (x <= H_LongBusyEndRange))
+#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \
+ && (x <= H_LONG_BUSY_END_RANGE))
/* Flags */
#define H_LARGE_PAGE (1UL<<(63-16))
#define H_PP1 (1UL<<(63-62))
#define H_PP2 (1UL<<(63-63))
+/* VASI States */
+#define H_VASI_INVALID 0
+#define H_VASI_ENABLED 1
+#define H_VASI_ABORTED 2
+#define H_VASI_SUSPENDING 3
+#define H_VASI_SUSPENDED 4
+#define H_VASI_RESUMED 5
+#define H_VASI_COMPLETED 6
+
/* DABRX flags */
#define H_DABRX_HYPERVISOR (1UL<<(63-61))
#define H_DABRX_KERNEL (1UL<<(63-62))
#define H_DABRX_USER (1UL<<(63-63))
+/* Each control block has to be on a 4K bondary */
+#define H_CB_ALIGNMENT 4096
+
/* pSeries hypervisor opcodes */
#define H_REMOVE 0x04
#define H_ENTER 0x08
#define H_PERFMON 0x7c
#define H_MIGRATE_DMA 0x78
#define H_REGISTER_VPA 0xDC
-#define H_CEDE 0xE0
+#define H_CEDE 0xE0
#define H_CONFER 0xE4
-#define H_PROD 0xE8
+#define H_PROD 0xE8
#define H_GET_PPP 0xEC
#define H_SET_PPP 0xF0
#define H_PURR 0xF4
-#define H_PIC 0xF8
+#define H_PIC 0xF8
#define H_REG_CRQ 0xFC
#define H_FREE_CRQ 0x100
#define H_VIO_SIGNAL 0x104
#define H_SEND_CRQ 0x108
-#define H_COPY_RDMA 0x110
+#define H_COPY_RDMA 0x110
+#define H_REGISTER_LOGICAL_LAN 0x114
+#define H_FREE_LOGICAL_LAN 0x118
+#define H_ADD_LOGICAL_LAN_BUFFER 0x11C
+#define H_SEND_LOGICAL_LAN 0x120
+#define H_MULTICAST_CTRL 0x130
#define H_SET_XDABR 0x134
#define H_STUFF_TCE 0x138
#define H_PUT_TCE_INDIRECT 0x13C
+#define H_CHANGE_LOGICAL_LAN_MAC 0x14C
#define H_VTERM_PARTNER_INFO 0x150
#define H_REGISTER_VTERM 0x154
#define H_FREE_VTERM 0x158
-#define H_POLL_PENDING 0x1D8
+#define H_RESET_EVENTS 0x15C
+#define H_ALLOC_RESOURCE 0x160
+#define H_FREE_RESOURCE 0x164
+#define H_MODIFY_QP 0x168
+#define H_QUERY_QP 0x16C
+#define H_REREGISTER_PMR 0x170
+#define H_REGISTER_SMR 0x174
+#define H_QUERY_MR 0x178
+#define H_QUERY_MW 0x17C
+#define H_QUERY_HCA 0x180
+#define H_QUERY_PORT 0x184
+#define H_MODIFY_PORT 0x188
+#define H_DEFINE_AQP1 0x18C
+#define H_GET_TRACE_BUFFER 0x190
+#define H_DEFINE_AQP0 0x194
+#define H_RESIZE_MR 0x198
+#define H_ATTACH_MCQP 0x19C
+#define H_DETACH_MCQP 0x1A0
+#define H_CREATE_RPT 0x1A4
+#define H_REMOVE_RPT 0x1A8
+#define H_REGISTER_RPAGES 0x1AC
+#define H_DISABLE_AND_GETC 0x1B0
+#define H_ERROR_DATA 0x1B4
+#define H_GET_HCA_INFO 0x1B8
+#define H_GET_PERF_COUNT 0x1BC
+#define H_MANAGE_TRACE 0x1C0
+#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
+#define H_QUERY_INT_STATE 0x1E4
+#define H_POLL_PENDING 0x1D8
#define H_JOIN 0x298
+#define H_VASI_STATE 0x2A4
#define H_ENABLE_CRQ 0x2B0
+#define MAX_HCALL_OPCODE H_ENABLE_CRQ
#ifndef __ASSEMBLY__
-/* plpar_hcall() -- Generic call interface using above opcodes
+/**
+ * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments
+ * @opcode: The hypervisor call to make.
*
- * The actual call interface is a hypervisor call instruction with
- * the opcode in R3 and input args in R4-R7.
- * Status is returned in R3 with variable output values in R4-R11.
- * Only H_PTE_READ with H_READ_4 uses R6-R11 so we ignore it for now
- * and return only two out args which MUST ALWAYS BE PROVIDED.
- */
-long plpar_hcall(unsigned long opcode,
- unsigned long arg1,
- unsigned long arg2,
- unsigned long arg3,
- unsigned long arg4,
- unsigned long *out1,
- unsigned long *out2,
- unsigned long *out3);
-
-/* Same as plpar_hcall but for those opcodes that return no values
- * other than status. Slightly more efficient.
+ * This call supports up to 7 arguments and only returns the status of
+ * the hcall. Use this version where possible, its slightly faster than
+ * the other plpar_hcalls.
*/
long plpar_hcall_norets(unsigned long opcode, ...);
-/*
- * Special hcall interface for ibmveth support.
- * Takes 8 input parms. Returns a rc and stores the
- * R4 return value in *out1.
- */
-long plpar_hcall_8arg_2ret(unsigned long opcode,
- unsigned long arg1,
- unsigned long arg2,
- unsigned long arg3,
- unsigned long arg4,
- unsigned long arg5,
- unsigned long arg6,
- unsigned long arg7,
- unsigned long arg8,
- unsigned long *out1);
-
-/* plpar_hcall_4out()
+/**
+ * plpar_hcall: - Make a pseries hypervisor call
+ * @opcode: The hypervisor call to make.
+ * @retbuf: Buffer to store up to 4 return arguments in.
*
- * same as plpar_hcall except with 4 output arguments.
+ * This call supports up to 6 arguments and 4 return arguments. Use
+ * PLPAR_HCALL_BUFSIZE to size the return argument buffer.
*
+ * Used for all but the craziest of phyp interfaces (see plpar_hcall9)
*/
-long plpar_hcall_4out(unsigned long opcode,
- unsigned long arg1,
- unsigned long arg2,
- unsigned long arg3,
- unsigned long arg4,
- unsigned long *out1,
- unsigned long *out2,
- unsigned long *out3,
- unsigned long *out4);
+#define PLPAR_HCALL_BUFSIZE 4
+long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...);
+
+/**
+ * plpar_hcall9: - Make a pseries hypervisor call with up to 9 return arguments
+ * @opcode: The hypervisor call to make.
+ * @retbuf: Buffer to store up to 9 return arguments in.
+ *
+ * This call supports up to 9 arguments and 9 return arguments. Use
+ * PLPAR_HCALL9_BUFSIZE to size the return argument buffer.
+ */
+#define PLPAR_HCALL9_BUFSIZE 9
+long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...);
+
+/* For hcall instrumentation. One structure per-hcall, per-CPU */
+struct hcall_stats {
+ unsigned long num_calls; /* number of calls (on this CPU) */
+ unsigned long tb_total; /* total wall time (mftb) of calls. */
+ unsigned long purr_total; /* total cpu time (PURR) of calls. */
+};
+void update_hcall_stats(unsigned long opcode, unsigned long tb_delta,
+ unsigned long purr_delta);
+#define HCALL_STAT_ARRAY_SIZE ((MAX_HCALL_OPCODE >> 2) + 1)
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */