#endif
/*
- * Both Galileo boards have the same UART mappings.
+ * Galileo EV64120 evaluation board
*/
-#if defined (CONFIG_MIPS_EV96100) || defined (CONFIG_MIPS_EV64120)
-#include <asm/galileo-boards/ev96100.h>
-#include <asm/galileo-boards/ev96100int.h>
-#define EV96100_SERIAL_PORT_DEFNS \
- { .baud_base = EV96100_BASE_BAUD, .irq = EV96100INT_UART_0, \
+#ifdef CONFIG_MIPS_EV64120
+#include <mach-gt64120.h>
+#define EV64120_SERIAL_PORT_DEFNS \
+ { .baud_base = EV64120_BASE_BAUD, .irq = EV64120_UART_IRQ, \
.flags = STD_COM_FLAGS, \
- .iomem_base = EV96100_UART0_REGS_BASE, .iomem_reg_shift = 2, \
+ .iomem_base = EV64120_UART0_REGS_BASE, .iomem_reg_shift = 2, \
.io_type = SERIAL_IO_MEM }, \
- { .baud_base = EV96100_BASE_BAUD, .irq = EV96100INT_UART_0, \
+ { .baud_base = EV64120_BASE_BAUD, .irq = EV64120_UART_IRQ, \
.flags = STD_COM_FLAGS, \
- .iomem_base = EV96100_UART1_REGS_BASE, .iomem_reg_shift = 2, \
+ .iomem_base = EV64120_UART1_REGS_BASE, .iomem_reg_shift = 2, \
.io_type = SERIAL_IO_MEM },
#else
-#define EV96100_SERIAL_PORT_DEFNS
-#endif
-
-#ifdef CONFIG_MIPS_ITE8172
-#include <asm/it8172/it8172.h>
-#include <asm/it8172/it8172_int.h>
-#include <asm/it8712.h>
-#define ITE_SERIAL_PORT_DEFNS \
- { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \
- .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 }, \
- { .baud_base = (24000000/(16*13)), .port = (IT8172_PCI_IO_BASE + IT8712_UART1_PORT), \
- .irq = IT8172_SERIRQ_4, .flags = STD_COM_FLAGS, .port = PORT_16550 }, \
- /* Smart Card Reader 0 */ \
- { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR0_BASE), \
- .irq = IT8172_SCR0_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 }, \
- /* Smart Card Reader 1 */ \
- { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \
- .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 },
-#else
-#define ITE_SERIAL_PORT_DEFNS
-#endif
-
-#ifdef CONFIG_MIPS_IVR
-#include <asm/it8172/it8172.h>
-#include <asm/it8172/it8172_int.h>
-#define IVR_SERIAL_PORT_DEFNS \
- { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \
- .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 }, \
- /* Smart Card Reader 1 */ \
- { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \
- .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 },
-#else
-#define IVR_SERIAL_PORT_DEFNS
+#define EV64120_SERIAL_PORT_DEFNS
#endif
#ifdef CONFIG_HAVE_STD_PC_SERIAL_PORT
#define STD_SERIAL_PORT_DEFNS
#endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */
-#ifdef CONFIG_MOMENCO_JAGUAR_ATX
-/* Ordinary NS16552 duart with a 20MHz crystal. */
-#define JAGUAR_ATX_UART_CLK 20000000
-#define JAGUAR_ATX_BASE_BAUD (JAGUAR_ATX_UART_CLK / 16)
-
-#define JAGUAR_ATX_SERIAL1_IRQ 6
-#define JAGUAR_ATX_SERIAL1_BASE 0xfd000023L
-
-#define _JAGUAR_ATX_SERIAL_INIT(int, base) \
- { .baud_base = JAGUAR_ATX_BASE_BAUD, irq: int, \
- .flags = (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
- .iomem_base = (u8 *) base, iomem_reg_shift: 2, \
- io_type: SERIAL_IO_MEM }
-#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS \
- _JAGUAR_ATX_SERIAL_INIT(JAGUAR_ATX_SERIAL1_IRQ, JAGUAR_ATX_SERIAL1_BASE)
-#else
-#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS
-#endif
-
#ifdef CONFIG_MOMENCO_OCELOT_3
#define OCELOT_3_BASE_BAUD ( 20000000 / 16 )
#define OCELOT_3_SERIAL_IRQ 6
#define MOMENCO_OCELOT_SERIAL_PORT_DEFNS
#endif
-#ifdef CONFIG_MOMENCO_OCELOT_G
-/* Ordinary NS16552 duart with a 20MHz crystal. */
-#define OCELOT_G_BASE_BAUD ( 20000000 / 16 )
-
-#define OCELOT_G_SERIAL1_IRQ 4
-#if 0
-#define OCELOT_G_SERIAL1_BASE 0xe0001020
-#else
-#define OCELOT_G_SERIAL1_BASE 0xfd000020
-#endif
-
-#define _OCELOT_G_SERIAL_INIT(int, base) \
- { .baud_base = OCELOT_G_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS,\
- .iomem_base = (u8 *) base, .iomem_reg_shift = 2, \
- .io_type = SERIAL_IO_MEM }
-#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS \
- _OCELOT_G_SERIAL_INIT(OCELOT_G_SERIAL1_IRQ, OCELOT_G_SERIAL1_BASE)
-#else
-#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS
-#endif
-
#ifdef CONFIG_MOMENCO_OCELOT_C
/* Ordinary NS16552 duart with a 20MHz crystal. */
#define OCELOT_C_BASE_BAUD ( 20000000 / 16 )
#define SERIAL_PORT_DFNS \
DDB5477_SERIAL_PORT_DEFNS \
- EV96100_SERIAL_PORT_DEFNS \
+ EV64120_SERIAL_PORT_DEFNS \
IP32_SERIAL_PORT_DEFNS \
- ITE_SERIAL_PORT_DEFNS \
- IVR_SERIAL_PORT_DEFNS \
JAZZ_SERIAL_PORT_DEFNS \
STD_SERIAL_PORT_DEFNS \
- MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS \
MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS \
MOMENCO_OCELOT_SERIAL_PORT_DEFNS \
MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS