[MIPS] Remove Momenco Jaguar ATX support

[pandora-kernel.git] / include / asm-mips / serial.h

diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h
index 584bd9c..ce51213 100644 (file)
--- a/include/asm-mips/serial.h
+++ b/include/asm-mips/serial.h
@@ -52,54 +52,21 @@
 #endif
 
 /*
- * Both Galileo boards have the same UART mappings.
+ * Galileo EV64120 evaluation board
  */
-#if defined (CONFIG_MIPS_EV96100) || defined (CONFIG_MIPS_EV64120)
-#include <asm/galileo-boards/ev96100.h>
-#include <asm/galileo-boards/ev96100int.h>
-#define EV96100_SERIAL_PORT_DEFNS                                  \
-    { .baud_base = EV96100_BASE_BAUD, .irq = EV96100INT_UART_0, \
+#ifdef CONFIG_MIPS_EV64120
+#include <mach-gt64120.h>
+#define EV64120_SERIAL_PORT_DEFNS                                  \
+    { .baud_base = EV64120_BASE_BAUD, .irq = EV64120_UART_IRQ, \
       .flags = STD_COM_FLAGS,  \
-      .iomem_base = EV96100_UART0_REGS_BASE, .iomem_reg_shift = 2, \
+      .iomem_base = EV64120_UART0_REGS_BASE, .iomem_reg_shift = 2, \
       .io_type = SERIAL_IO_MEM }, \
-    { .baud_base = EV96100_BASE_BAUD, .irq = EV96100INT_UART_0, \
+    { .baud_base = EV64120_BASE_BAUD, .irq = EV64120_UART_IRQ, \
       .flags = STD_COM_FLAGS, \
-      .iomem_base = EV96100_UART1_REGS_BASE, .iomem_reg_shift = 2, \
+      .iomem_base = EV64120_UART1_REGS_BASE, .iomem_reg_shift = 2, \
       .io_type = SERIAL_IO_MEM },
 #else
-#define EV96100_SERIAL_PORT_DEFNS
-#endif
-
-#ifdef CONFIG_MIPS_ITE8172
-#include <asm/it8172/it8172.h>
-#include <asm/it8172/it8172_int.h>
-#include <asm/it8712.h>
-#define ITE_SERIAL_PORT_DEFNS                                  \
-    { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \
-      .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 }, \
-    { .baud_base = (24000000/(16*13)), .port = (IT8172_PCI_IO_BASE + IT8712_UART1_PORT), \
-      .irq = IT8172_SERIRQ_4, .flags = STD_COM_FLAGS, .port = PORT_16550 }, \
-    /* Smart Card Reader 0 */ \
-    { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR0_BASE), \
-      .irq = IT8172_SCR0_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 }, \
-    /* Smart Card Reader 1 */ \
-    { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \
-      .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 },
-#else
-#define ITE_SERIAL_PORT_DEFNS
-#endif
-
-#ifdef CONFIG_MIPS_IVR
-#include <asm/it8172/it8172.h>
-#include <asm/it8172/it8172_int.h>
-#define IVR_SERIAL_PORT_DEFNS                                  \
-    { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \
-      .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 },         \
-    /* Smart Card Reader 1 */ \
-    { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \
-      .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 },
-#else
-#define IVR_SERIAL_PORT_DEFNS
+#define EV64120_SERIAL_PORT_DEFNS
 #endif
 
 #ifdef CONFIG_HAVE_STD_PC_SERIAL_PORT
@@ -114,25 +81,6 @@
 #define STD_SERIAL_PORT_DEFNS
 #endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */
 
-#ifdef CONFIG_MOMENCO_JAGUAR_ATX
-/* Ordinary NS16552 duart with a 20MHz crystal.  */
-#define JAGUAR_ATX_UART_CLK    20000000
-#define JAGUAR_ATX_BASE_BAUD   (JAGUAR_ATX_UART_CLK / 16)
-
-#define JAGUAR_ATX_SERIAL1_IRQ 6
-#define JAGUAR_ATX_SERIAL1_BASE        0xfd000023L
-
-#define _JAGUAR_ATX_SERIAL_INIT(int, base)                             \
-       { .baud_base = JAGUAR_ATX_BASE_BAUD, irq: int,                  \
-         .flags = (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),             \
-         .iomem_base = (u8 *) base, iomem_reg_shift: 2,                        \
-         io_type: SERIAL_IO_MEM }
-#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS                           \
-       _JAGUAR_ATX_SERIAL_INIT(JAGUAR_ATX_SERIAL1_IRQ, JAGUAR_ATX_SERIAL1_BASE)
-#else
-#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS
-#endif
-
 #ifdef CONFIG_MOMENCO_OCELOT_3
 #define OCELOT_3_BASE_BAUD     ( 20000000 / 16 )
 #define OCELOT_3_SERIAL_IRQ    6
@@ -167,27 +115,6 @@
 #define MOMENCO_OCELOT_SERIAL_PORT_DEFNS
 #endif
 
-#ifdef CONFIG_MOMENCO_OCELOT_G
-/* Ordinary NS16552 duart with a 20MHz crystal.  */
-#define OCELOT_G_BASE_BAUD ( 20000000 / 16 )
-
-#define OCELOT_G_SERIAL1_IRQ   4
-#if 0
-#define OCELOT_G_SERIAL1_BASE  0xe0001020
-#else
-#define OCELOT_G_SERIAL1_BASE  0xfd000020
-#endif
-
-#define _OCELOT_G_SERIAL_INIT(int, base)                               \
-       { .baud_base = OCELOT_G_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS,\
-         .iomem_base = (u8 *) base, .iomem_reg_shift = 2,                      \
-         .io_type = SERIAL_IO_MEM }
-#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS                             \
-       _OCELOT_G_SERIAL_INIT(OCELOT_G_SERIAL1_IRQ, OCELOT_G_SERIAL1_BASE)
-#else
-#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS
-#endif
-
 #ifdef CONFIG_MOMENCO_OCELOT_C
 /* Ordinary NS16552 duart with a 20MHz crystal.  */
 #define OCELOT_C_BASE_BAUD ( 20000000 / 16 )
@@ -239,13 +166,10 @@
 
 #define SERIAL_PORT_DFNS                               \
        DDB5477_SERIAL_PORT_DEFNS                       \
-       EV96100_SERIAL_PORT_DEFNS                       \
+       EV64120_SERIAL_PORT_DEFNS                       \
        IP32_SERIAL_PORT_DEFNS                          \
-       ITE_SERIAL_PORT_DEFNS                           \
-       IVR_SERIAL_PORT_DEFNS                           \
        JAZZ_SERIAL_PORT_DEFNS                          \
        STD_SERIAL_PORT_DEFNS                           \
-       MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS              \
        MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS              \
        MOMENCO_OCELOT_SERIAL_PORT_DEFNS                \
        MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS