[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

[pandora-kernel.git] / include / asm-arm / arch-s3c2410 / debug-macro.S

diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S
deleted file mode 100644 (file)
index 89076c3..0000000
--- a/include/asm-arm/arch-s3c2410/debug-macro.S
+++ /dev/null
@@ -1,102 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Copyright (C) 2005 Simtec Electronics
- *
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/map.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
-
-#define S3C2410_UART1_OFF (0x4000)
-#define SHIFT_2440TXF (14-9)
-
-       .macro addruart, rx
-               mrc     p15, 0, \rx, c1, c0
-               tst     \rx, #1
-               ldreq   \rx, = S3C24XX_PA_UART
-               ldrne   \rx, = S3C24XX_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
-               add     \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
-#endif
-       .endm
-
-       .macro fifo_full_s3c24xx rd, rx
-               @ check for arm920 vs arm926. currently assume all arm926
-               @ devices have an 64 byte FIFO identical to the s3c2440
-               mrc     p15, 0, \rd, c0, c0
-               and     \rd, \rd, #0xff0
-               teq     \rd, #0x260
-               beq     1004f
-               mrc     p15, 0, \rd, c1, c0
-               tst     \rd, #1
-               addeq   \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
-               addne   \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
-               bic     \rd, \rd, #0xff000
-               ldr     \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
-               and     \rd, \rd, #0x00ff0000
-               teq     \rd, #0x00440000                @ is it 2440?
-1004:
-               ldr     \rd, [ \rx, # S3C2410_UFSTAT ]
-               moveq   \rd, \rd, lsr #SHIFT_2440TXF
-               tst     \rd, #S3C2410_UFSTAT_TXFULL
-       .endm
-
-       .macro  fifo_full_s3c2410 rd, rx
-               ldr     \rd, [ \rx, # S3C2410_UFSTAT ]
-               tst     \rd, #S3C2410_UFSTAT_TXFULL
-       .endm
-
-/* fifo level reading */
-
-       .macro fifo_level_s3c24xx rd, rx
-               @ check for arm920 vs arm926. currently assume all arm926
-               @ devices have an 64 byte FIFO identical to the s3c2440
-               mrc     p15, 0, \rd, c0, c0
-               and     \rd, \rd, #0xff0
-               teq     \rd, #0x260
-               beq     10000f
-               mrc     p15, 0, \rd, c1, c0
-               tst     \rd, #1
-               addeq   \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
-               addne   \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
-               bic     \rd, \rd, #0xff000
-               ldr     \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
-               and     \rd, \rd, #0x00ff0000
-               teq     \rd, #0x00440000                @ is it 2440?
-
-10000:
-               ldr     \rd, [ \rx, # S3C2410_UFSTAT ]
-               andne   \rd, \rd, #S3C2410_UFSTAT_TXMASK
-               andeq   \rd, \rd, #S3C2440_UFSTAT_TXMASK
-       .endm
-
-       .macro fifo_level_s3c2410 rd, rx
-               ldr     \rd, [ \rx, # S3C2410_UFSTAT ]
-               and     \rd, \rd, #S3C2410_UFSTAT_TXMASK
-       .endm
-
-/* Select the correct implementation depending on the configuration. The
- * S3C2440 will get selected by default, as these are the most widely
- * used variants of these
-*/
-
-#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY)
-#define fifo_full  fifo_full_s3c2410
-#define fifo_level fifo_level_s3c2410
-#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY)
-#define fifo_full  fifo_full_s3c24xx
-#define fifo_level fifo_level_s3c24xx
-#endif
-
-/* include the reset of the code which will do the work */
-
-#include <asm/plat-s3c/debug-macro.S>