audit: inode watches depend on CONFIG_AUDIT not CONFIG_AUDIT_SYSCALL

[pandora-kernel.git] / drivers / watchdog / Kconfig

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b166f28..b1ccc04 100644 (file)
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -240,6 +240,32 @@ config ORION_WATCHDOG
          To compile this driver as a module, choose M here: the
          module will be called orion_wdt.
 
+config COH901327_WATCHDOG
+       bool "ST-Ericsson COH 901 327 watchdog"
+       depends on ARCH_U300
+       default y if MACH_U300
+       help
+         Say Y here to include Watchdog timer support for the
+         watchdog embedded into the ST-Ericsson U300 series platforms.
+         This watchdog is used to reset the system and thus cannot be
+         compiled as a module.
+
+config TWL4030_WATCHDOG
+       tristate "TWL4030 Watchdog"
+       depends on TWL4030_CORE
+       help
+         Support for TI TWL4030 watchdog.  Say 'Y' here to enable the
+         watchdog timer support for TWL4030 chips.
+
+config STMP3XXX_WATCHDOG
+       tristate "Freescale STMP3XXX watchdog"
+       depends on ARCH_STMP3XXX
+       help
+         Say Y here if to include support for the watchdog timer
+         for the Sigmatel STMP37XX/378X SoC.
+         To compile this driver as a module, choose M here: the
+         module will be called stmp3xxx_wdt.
+
 # AVR32 Architecture
 
 config AT32AP700X_WDT
@@ -703,6 +729,12 @@ config SBC_EPX_C3_WATCHDOG
 
 # MIPS Architecture
 
+config BCM47XX_WDT
+       tristate "Broadcom BCM47xx Watchdog Timer"
+       depends on BCM47XX
+       help
+         Hardware driver for the Broadcom BCM47xx Watchog Timer.
+
 config RC32434_WDT
        tristate "IDT RC32434 SoC Watchdog Timer"
        depends on MIKROTIK_RB532
@@ -729,6 +761,15 @@ config WDT_MTX1
          Hardware driver for the MTX-1 boards. This is a watchdog timer that
          will reboot the machine after a 100 seconds timer expired.
 
+config PNX833X_WDT
+       tristate "PNX833x Hardware Watchdog"
+       depends on SOC_PNX8335
+       help
+         Hardware driver for the PNX833x's watchdog. This is a
+         watchdog timer that will reboot the machine after a programable
+         timer has expired and no process has written to /dev/watchdog during
+         that time.
+
 config WDT_RM9K_GPI
        tristate "RM9000/GPI hardware watchdog"
        depends on CPU_RM9000
@@ -966,24 +1007,16 @@ config WDTPCI
        ---help---
          If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
 
-         To compile this driver as a module, choose M here: the
-         module will be called wdt_pci.
-
-config WDT_501_PCI
-       bool "PCI-WDT501 features"
-       depends on WDTPCI
-       help
-         Saying Y here and creating a character special file /dev/temperature
-         with major number 10 and minor number 131 ("man mknod") will give
-         you a thermometer inside your computer: reading from
-         /dev/temperature yields one byte, the temperature in degrees
-         Fahrenheit. This works only if you have a PCI-WDT501 watchdog board
-         installed.
+         If you have a PCI-WDT501 watchdog board then you can enable the
+         temperature sensor by setting the type parameter to 501.
 
          If you want to enable the Fan Tachometer on the PCI-WDT501, then you
          can do this via the tachometer parameter. Only do this if you have a
          fan tachometer actually set up.
 
+         To compile this driver as a module, choose M here: the
+         module will be called wdt_pci.
+
 #
 # USB-based Watchdog Cards
 #