#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/cpufreq.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/mutex.h>
#include <linux/io.h>
+#include <video/sa1100fb.h>
+
#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <mach/assabet.h>
#include <mach/shannon.h>
-/*
- * debugging?
- */
-#define DEBUG 0
/*
* Complain if VAR is out of range.
*/
#define DEBUG_VAR 1
-#undef ASSABET_PAL_VIDEO
-
#include "sa1100fb.h"
-extern void (*sa1100fb_backlight_power)(int on);
-extern void (*sa1100fb_lcd_power)(int on);
-
-static struct sa1100fb_rgb rgb_4 = {
+static const struct sa1100fb_rgb rgb_4 = {
.red = { .offset = 0, .length = 4, },
.green = { .offset = 0, .length = 4, },
.blue = { .offset = 0, .length = 4, },
.transp = { .offset = 0, .length = 0, },
};
-static struct sa1100fb_rgb rgb_8 = {
+static const struct sa1100fb_rgb rgb_8 = {
.red = { .offset = 0, .length = 8, },
.green = { .offset = 0, .length = 8, },
.blue = { .offset = 0, .length = 8, },
.transp = { .offset = 0, .length = 0, },
};
-static struct sa1100fb_rgb def_rgb_16 = {
+static const struct sa1100fb_rgb def_rgb_16 = {
.red = { .offset = 11, .length = 5, },
.green = { .offset = 5, .length = 6, },
.blue = { .offset = 0, .length = 5, },
.transp = { .offset = 0, .length = 0, },
};
-#ifdef CONFIG_SA1100_ASSABET
-#ifndef ASSABET_PAL_VIDEO
-/*
- * The assabet uses a sharp LQ039Q2DS54 LCD module. It is actually
- * takes an RGB666 signal, but we provide it with an RGB565 signal
- * instead (def_rgb_16).
- */
-static struct sa1100fb_mach_info lq039q2ds54_info __initdata = {
- .pixclock = 171521, .bpp = 16,
- .xres = 320, .yres = 240,
-
- .hsync_len = 5, .vsync_len = 1,
- .left_margin = 61, .upper_margin = 3,
- .right_margin = 9, .lower_margin = 0,
-
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
- .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#else
-static struct sa1100fb_mach_info pal_info __initdata = {
- .pixclock = 67797, .bpp = 16,
- .xres = 640, .yres = 512,
-
- .hsync_len = 64, .vsync_len = 6,
- .left_margin = 125, .upper_margin = 70,
- .right_margin = 115, .lower_margin = 36,
-
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
- .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#endif
-
-#ifdef CONFIG_SA1100_H3600
-static struct sa1100fb_mach_info h3600_info __initdata = {
- .pixclock = 174757, .bpp = 16,
- .xres = 320, .yres = 240,
-
- .hsync_len = 3, .vsync_len = 3,
- .left_margin = 12, .upper_margin = 10,
- .right_margin = 17, .lower_margin = 1,
-
- .cmap_static = 1,
-
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
- .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-
-static struct sa1100fb_rgb h3600_rgb_16 = {
- .red = { .offset = 12, .length = 4, },
- .green = { .offset = 7, .length = 4, },
- .blue = { .offset = 1, .length = 4, },
- .transp = { .offset = 0, .length = 0, },
-};
-#endif
-
-#ifdef CONFIG_SA1100_H3100
-static struct sa1100fb_mach_info h3100_info __initdata = {
- .pixclock = 406977, .bpp = 4,
- .xres = 320, .yres = 240,
-
- .hsync_len = 26, .vsync_len = 41,
- .left_margin = 4, .upper_margin = 0,
- .right_margin = 4, .lower_margin = 0,
-
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .cmap_greyscale = 1,
- .cmap_inverse = 1,
-
- .lccr0 = LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
- .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#endif
-
-#ifdef CONFIG_SA1100_COLLIE
-static struct sa1100fb_mach_info collie_info __initdata = {
- .pixclock = 171521, .bpp = 16,
- .xres = 320, .yres = 240,
-
- .hsync_len = 5, .vsync_len = 1,
- .left_margin = 11, .upper_margin = 2,
- .right_margin = 30, .lower_margin = 0,
-
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
- .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#endif
-
-#ifdef LART_GREY_LCD
-static struct sa1100fb_mach_info lart_grey_info __initdata = {
- .pixclock = 150000, .bpp = 4,
- .xres = 320, .yres = 240,
-
- .hsync_len = 1, .vsync_len = 1,
- .left_margin = 4, .upper_margin = 0,
- .right_margin = 2, .lower_margin = 0,
-
- .cmap_greyscale = 1,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
- .lccr0 = LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono,
- .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#ifdef LART_COLOR_LCD
-static struct sa1100fb_mach_info lart_color_info __initdata = {
- .pixclock = 150000, .bpp = 16,
- .xres = 320, .yres = 240,
-
- .hsync_len = 2, .vsync_len = 3,
- .left_margin = 69, .upper_margin = 14,
- .right_margin = 8, .lower_margin = 4,
-
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
- .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#ifdef LART_VIDEO_OUT
-static struct sa1100fb_mach_info lart_video_info __initdata = {
- .pixclock = 39721, .bpp = 16,
- .xres = 640, .yres = 480,
-
- .hsync_len = 95, .vsync_len = 2,
- .left_margin = 40, .upper_margin = 32,
- .right_margin = 24, .lower_margin = 11,
-
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
- .lccr3 = LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-
-#ifdef LART_KIT01_LCD
-static struct sa1100fb_mach_info lart_kit01_info __initdata = {
- .pixclock = 63291, .bpp = 16,
- .xres = 640, .yres = 480,
-
- .hsync_len = 64, .vsync_len = 3,
- .left_margin = 122, .upper_margin = 45,
- .right_margin = 10, .lower_margin = 10,
-
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
- .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg
-};
-#endif
-
-#ifdef CONFIG_SA1100_SHANNON
-static struct sa1100fb_mach_info shannon_info __initdata = {
- .pixclock = 152500, .bpp = 8,
- .xres = 640, .yres = 480,
-
- .hsync_len = 4, .vsync_len = 3,
- .left_margin = 2, .upper_margin = 0,
- .right_margin = 1, .lower_margin = 0,
-
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
- .lccr0 = LCCR0_Color | LCCR0_Dual | LCCR0_Pas,
- .lccr3 = LCCR3_ACBsDiv(512),
-};
-#endif
-
-static struct sa1100fb_mach_info * __init
-sa1100fb_get_machine_info(struct sa1100fb_info *fbi)
-{
- struct sa1100fb_mach_info *inf = NULL;
-
- /*
- * R G B T
- * default {11,5}, { 5,6}, { 0,5}, { 0,0}
- * h3600 {12,4}, { 7,4}, { 1,4}, { 0,0}
- * freebird { 8,4}, { 4,4}, { 0,4}, {12,4}
- */
-#ifdef CONFIG_SA1100_ASSABET
- if (machine_is_assabet()) {
-#ifndef ASSABET_PAL_VIDEO
- inf = &lq039q2ds54_info;
-#else
- inf = &pal_info;
-#endif
- }
-#endif
-#ifdef CONFIG_SA1100_H3100
- if (machine_is_h3100()) {
- inf = &h3100_info;
- }
-#endif
-#ifdef CONFIG_SA1100_H3600
- if (machine_is_h3600()) {
- inf = &h3600_info;
- fbi->rgb[RGB_16] = &h3600_rgb_16;
- }
-#endif
-#ifdef CONFIG_SA1100_COLLIE
- if (machine_is_collie()) {
- inf = &collie_info;
- }
-#endif
-#ifdef CONFIG_SA1100_LART
- if (machine_is_lart()) {
-#ifdef LART_GREY_LCD
- inf = &lart_grey_info;
-#endif
-#ifdef LART_COLOR_LCD
- inf = &lart_color_info;
-#endif
-#ifdef LART_VIDEO_OUT
- inf = &lart_video_info;
-#endif
-#ifdef LART_KIT01_LCD
- inf = &lart_kit01_info;
-#endif
- }
-#endif
-#ifdef CONFIG_SA1100_SHANNON
- if (machine_is_shannon()) {
- inf = &shannon_info;
- }
-#endif
- return inf;
-}
-
static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_info *);
static void set_ctrlr_state(struct sa1100fb_info *fbi, u_int state);
* is what you poke into the framebuffer to produce the
* colour you requested.
*/
- if (fbi->cmap_inverse) {
+ if (fbi->inf->cmap_inverse) {
red = 0xffff - red;
green = 0xffff - green;
blue = 0xffff - blue;
var->xres = MIN_XRES;
if (var->yres < MIN_YRES)
var->yres = MIN_YRES;
- if (var->xres > fbi->max_xres)
- var->xres = fbi->max_xres;
- if (var->yres > fbi->max_yres)
- var->yres = fbi->max_yres;
+ if (var->xres > fbi->inf->xres)
+ var->xres = fbi->inf->xres;
+ if (var->yres > fbi->inf->yres)
+ var->yres = fbi->inf->yres;
var->xres_virtual = max(var->xres_virtual, var->xres);
var->yres_virtual = max(var->yres_virtual, var->yres);
- DPRINTK("var->bits_per_pixel=%d\n", var->bits_per_pixel);
+ dev_dbg(fbi->dev, "var->bits_per_pixel=%d\n", var->bits_per_pixel);
switch (var->bits_per_pixel) {
case 4:
rgbidx = RGB_4;
var->blue = fbi->rgb[rgbidx]->blue;
var->transp = fbi->rgb[rgbidx]->transp;
- DPRINTK("RGBT length = %d:%d:%d:%d\n",
+ dev_dbg(fbi->dev, "RGBT length = %d:%d:%d:%d\n",
var->red.length, var->green.length, var->blue.length,
var->transp.length);
- DPRINTK("RGBT offset = %d:%d:%d:%d\n",
+ dev_dbg(fbi->dev, "RGBT offset = %d:%d:%d:%d\n",
var->red.offset, var->green.offset, var->blue.offset,
var->transp.offset);
#ifdef CONFIG_CPU_FREQ
- printk(KERN_DEBUG "dma period = %d ps, clock = %d kHz\n",
+ dev_dbg(fbi->dev, "dma period = %d ps, clock = %d kHz\n",
sa1100fb_display_dma_period(var),
cpufreq_get(smp_processor_id()));
#endif
return 0;
}
-static inline void sa1100fb_set_truecolor(u_int is_true_color)
+static void sa1100fb_set_visual(struct sa1100fb_info *fbi, u32 visual)
{
- if (machine_is_assabet()) {
-#if 1 // phase 4 or newer Assabet's
- if (is_true_color)
- ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
- else
- ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
-#else
- // older Assabet's
- if (is_true_color)
- ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
- else
- ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
-#endif
- }
+ if (fbi->inf->set_visual)
+ fbi->inf->set_visual(visual);
}
/*
struct fb_var_screeninfo *var = &info->var;
unsigned long palette_mem_size;
- DPRINTK("set_par\n");
+ dev_dbg(fbi->dev, "set_par\n");
if (var->bits_per_pixel == 16)
fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR;
- else if (!fbi->cmap_static)
+ else if (!fbi->inf->cmap_static)
fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
else {
/*
palette_mem_size = fbi->palette_size * sizeof(u16);
- DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
+ dev_dbg(fbi->dev, "palette_mem_size = 0x%08lx\n", palette_mem_size);
fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size);
fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size;
/*
* Set (any) board control register to handle new color depth
*/
- sa1100fb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR);
+ sa1100fb_set_visual(fbi, fbi->fb.fix.visual);
sa1100fb_activate_var(var, fbi);
return 0;
/*
* Make sure the user isn't doing something stupid.
*/
- if (!kspc && (fbi->fb.var.bits_per_pixel == 16 || fbi->cmap_static))
+ if (!kspc && (fbi->fb.var.bits_per_pixel == 16 || fbi->inf->cmap_static))
return -EINVAL;
return gen_set_cmap(cmap, kspc, con, info);
struct sa1100fb_info *fbi = (struct sa1100fb_info *)info;
int i;
- DPRINTK("sa1100fb_blank: blank=%d\n", blank);
+ dev_dbg(fbi->dev, "sa1100fb_blank: blank=%d\n", blank);
switch (blank) {
case FB_BLANK_POWERDOWN:
u_int half_screen_size, yres, pcd;
u_long flags;
- DPRINTK("Configuring SA1100 LCD\n");
+ dev_dbg(fbi->dev, "Configuring SA1100 LCD\n");
- DPRINTK("var: xres=%d hslen=%d lm=%d rm=%d\n",
+ dev_dbg(fbi->dev, "var: xres=%d hslen=%d lm=%d rm=%d\n",
var->xres, var->hsync_len,
var->left_margin, var->right_margin);
- DPRINTK("var: yres=%d vslen=%d um=%d bm=%d\n",
+ dev_dbg(fbi->dev, "var: yres=%d vslen=%d um=%d bm=%d\n",
var->yres, var->vsync_len,
var->upper_margin, var->lower_margin);
#if DEBUG_VAR
if (var->xres < 16 || var->xres > 1024)
- printk(KERN_ERR "%s: invalid xres %d\n",
+ dev_err(fbi->dev, "%s: invalid xres %d\n",
fbi->fb.fix.id, var->xres);
if (var->hsync_len < 1 || var->hsync_len > 64)
- printk(KERN_ERR "%s: invalid hsync_len %d\n",
+ dev_err(fbi->dev, "%s: invalid hsync_len %d\n",
fbi->fb.fix.id, var->hsync_len);
if (var->left_margin < 1 || var->left_margin > 255)
- printk(KERN_ERR "%s: invalid left_margin %d\n",
+ dev_err(fbi->dev, "%s: invalid left_margin %d\n",
fbi->fb.fix.id, var->left_margin);
if (var->right_margin < 1 || var->right_margin > 255)
- printk(KERN_ERR "%s: invalid right_margin %d\n",
+ dev_err(fbi->dev, "%s: invalid right_margin %d\n",
fbi->fb.fix.id, var->right_margin);
if (var->yres < 1 || var->yres > 1024)
- printk(KERN_ERR "%s: invalid yres %d\n",
+ dev_err(fbi->dev, "%s: invalid yres %d\n",
fbi->fb.fix.id, var->yres);
if (var->vsync_len < 1 || var->vsync_len > 64)
- printk(KERN_ERR "%s: invalid vsync_len %d\n",
+ dev_err(fbi->dev, "%s: invalid vsync_len %d\n",
fbi->fb.fix.id, var->vsync_len);
if (var->upper_margin < 0 || var->upper_margin > 255)
- printk(KERN_ERR "%s: invalid upper_margin %d\n",
+ dev_err(fbi->dev, "%s: invalid upper_margin %d\n",
fbi->fb.fix.id, var->upper_margin);
if (var->lower_margin < 0 || var->lower_margin > 255)
- printk(KERN_ERR "%s: invalid lower_margin %d\n",
+ dev_err(fbi->dev, "%s: invalid lower_margin %d\n",
fbi->fb.fix.id, var->lower_margin);
#endif
- new_regs.lccr0 = fbi->lccr0 |
+ new_regs.lccr0 = fbi->inf->lccr0 |
LCCR0_LEN | LCCR0_LDM | LCCR0_BAM |
LCCR0_ERM | LCCR0_LtlEnd | LCCR0_DMADel(0);
* the YRES parameter.
*/
yres = var->yres;
- if (fbi->lccr0 & LCCR0_Dual)
+ if (fbi->inf->lccr0 & LCCR0_Dual)
yres /= 2;
new_regs.lccr2 =
LCCR2_EndFrmDel(var->lower_margin);
pcd = get_pcd(var->pixclock, cpufreq_get(0));
- new_regs.lccr3 = LCCR3_PixClkDiv(pcd) | fbi->lccr3 |
+ new_regs.lccr3 = LCCR3_PixClkDiv(pcd) | fbi->inf->lccr3 |
(var->sync & FB_SYNC_HOR_HIGH_ACT ? LCCR3_HorSnchH : LCCR3_HorSnchL) |
(var->sync & FB_SYNC_VERT_HIGH_ACT ? LCCR3_VrtSnchH : LCCR3_VrtSnchL);
- DPRINTK("nlccr0 = 0x%08lx\n", new_regs.lccr0);
- DPRINTK("nlccr1 = 0x%08lx\n", new_regs.lccr1);
- DPRINTK("nlccr2 = 0x%08lx\n", new_regs.lccr2);
- DPRINTK("nlccr3 = 0x%08lx\n", new_regs.lccr3);
+ dev_dbg(fbi->dev, "nlccr0 = 0x%08lx\n", new_regs.lccr0);
+ dev_dbg(fbi->dev, "nlccr1 = 0x%08lx\n", new_regs.lccr1);
+ dev_dbg(fbi->dev, "nlccr2 = 0x%08lx\n", new_regs.lccr2);
+ dev_dbg(fbi->dev, "nlccr3 = 0x%08lx\n", new_regs.lccr3);
half_screen_size = var->bits_per_pixel;
half_screen_size = half_screen_size * var->xres * var->yres / 16;
* Only update the registers if the controller is enabled
* and something has changed.
*/
- if ((LCCR0 != fbi->reg_lccr0) || (LCCR1 != fbi->reg_lccr1) ||
- (LCCR2 != fbi->reg_lccr2) || (LCCR3 != fbi->reg_lccr3) ||
- (DBAR1 != fbi->dbar1) || (DBAR2 != fbi->dbar2))
+ if (readl_relaxed(fbi->base + LCCR0) != fbi->reg_lccr0 ||
+ readl_relaxed(fbi->base + LCCR1) != fbi->reg_lccr1 ||
+ readl_relaxed(fbi->base + LCCR2) != fbi->reg_lccr2 ||
+ readl_relaxed(fbi->base + LCCR3) != fbi->reg_lccr3 ||
+ readl_relaxed(fbi->base + DBAR1) != fbi->dbar1 ||
+ readl_relaxed(fbi->base + DBAR2) != fbi->dbar2)
sa1100fb_schedule_work(fbi, C_REENABLE);
return 0;
*/
static inline void __sa1100fb_backlight_power(struct sa1100fb_info *fbi, int on)
{
- DPRINTK("backlight o%s\n", on ? "n" : "ff");
+ dev_dbg(fbi->dev, "backlight o%s\n", on ? "n" : "ff");
- if (sa1100fb_backlight_power)
- sa1100fb_backlight_power(on);
+ if (fbi->inf->backlight_power)
+ fbi->inf->backlight_power(on);
}
static inline void __sa1100fb_lcd_power(struct sa1100fb_info *fbi, int on)
{
- DPRINTK("LCD power o%s\n", on ? "n" : "ff");
+ dev_dbg(fbi->dev, "LCD power o%s\n", on ? "n" : "ff");
- if (sa1100fb_lcd_power)
- sa1100fb_lcd_power(on);
+ if (fbi->inf->lcd_power)
+ fbi->inf->lcd_power(on);
}
static void sa1100fb_setup_gpio(struct sa1100fb_info *fbi)
}
if (mask) {
+ unsigned long flags;
+
+ /*
+ * SA-1100 requires the GPIO direction register set
+ * appropriately for the alternate function. Hence
+ * we set it here via bitmask rather than excessive
+ * fiddling via the GPIO subsystem - and even then
+ * we'll still have to deal with GAFR.
+ */
+ local_irq_save(flags);
GPDR |= mask;
GAFR |= mask;
+ local_irq_restore(flags);
}
}
static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
{
- DPRINTK("Enabling LCD controller\n");
+ dev_dbg(fbi->dev, "Enabling LCD controller\n");
/*
* Make sure the mode bits are present in the first palette entry
fbi->palette_cpu[0] |= palette_pbs(&fbi->fb.var);
/* Sequence from 11.7.10 */
- LCCR3 = fbi->reg_lccr3;
- LCCR2 = fbi->reg_lccr2;
- LCCR1 = fbi->reg_lccr1;
- LCCR0 = fbi->reg_lccr0 & ~LCCR0_LEN;
- DBAR1 = fbi->dbar1;
- DBAR2 = fbi->dbar2;
- LCCR0 |= LCCR0_LEN;
-
- if (machine_is_shannon()) {
- GPDR |= SHANNON_GPIO_DISP_EN;
- GPSR |= SHANNON_GPIO_DISP_EN;
- }
-
- DPRINTK("DBAR1 = 0x%08x\n", DBAR1);
- DPRINTK("DBAR2 = 0x%08x\n", DBAR2);
- DPRINTK("LCCR0 = 0x%08x\n", LCCR0);
- DPRINTK("LCCR1 = 0x%08x\n", LCCR1);
- DPRINTK("LCCR2 = 0x%08x\n", LCCR2);
- DPRINTK("LCCR3 = 0x%08x\n", LCCR3);
+ writel_relaxed(fbi->reg_lccr3, fbi->base + LCCR3);
+ writel_relaxed(fbi->reg_lccr2, fbi->base + LCCR2);
+ writel_relaxed(fbi->reg_lccr1, fbi->base + LCCR1);
+ writel_relaxed(fbi->reg_lccr0 & ~LCCR0_LEN, fbi->base + LCCR0);
+ writel_relaxed(fbi->dbar1, fbi->base + DBAR1);
+ writel_relaxed(fbi->dbar2, fbi->base + DBAR2);
+ writel_relaxed(fbi->reg_lccr0 | LCCR0_LEN, fbi->base + LCCR0);
+
+ if (machine_is_shannon())
+ gpio_set_value(SHANNON_GPIO_DISP_EN, 1);
+
+ dev_dbg(fbi->dev, "DBAR1: 0x%08x\n", readl_relaxed(fbi->base + DBAR1));
+ dev_dbg(fbi->dev, "DBAR2: 0x%08x\n", readl_relaxed(fbi->base + DBAR2));
+ dev_dbg(fbi->dev, "LCCR0: 0x%08x\n", readl_relaxed(fbi->base + LCCR0));
+ dev_dbg(fbi->dev, "LCCR1: 0x%08x\n", readl_relaxed(fbi->base + LCCR1));
+ dev_dbg(fbi->dev, "LCCR2: 0x%08x\n", readl_relaxed(fbi->base + LCCR2));
+ dev_dbg(fbi->dev, "LCCR3: 0x%08x\n", readl_relaxed(fbi->base + LCCR3));
}
static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
{
DECLARE_WAITQUEUE(wait, current);
+ u32 lccr0;
- DPRINTK("Disabling LCD controller\n");
+ dev_dbg(fbi->dev, "Disabling LCD controller\n");
- if (machine_is_shannon()) {
- GPCR |= SHANNON_GPIO_DISP_EN;
- }
+ if (machine_is_shannon())
+ gpio_set_value(SHANNON_GPIO_DISP_EN, 0);
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&fbi->ctrlr_wait, &wait);
- LCSR = 0xffffffff; /* Clear LCD Status Register */
- LCCR0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */
- LCCR0 &= ~LCCR0_LEN; /* Disable LCD Controller */
+ /* Clear LCD Status Register */
+ writel_relaxed(~0, fbi->base + LCSR);
+
+ lccr0 = readl_relaxed(fbi->base + LCCR0);
+ lccr0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */
+ writel_relaxed(lccr0, fbi->base + LCCR0);
+ lccr0 &= ~LCCR0_LEN; /* Disable LCD Controller */
+ writel_relaxed(lccr0, fbi->base + LCCR0);
schedule_timeout(20 * HZ / 1000);
remove_wait_queue(&fbi->ctrlr_wait, &wait);
static irqreturn_t sa1100fb_handle_irq(int irq, void *dev_id)
{
struct sa1100fb_info *fbi = dev_id;
- unsigned int lcsr = LCSR;
+ unsigned int lcsr = readl_relaxed(fbi->base + LCSR);
if (lcsr & LCSR_LDD) {
- LCCR0 |= LCCR0_LDM;
+ u32 lccr0 = readl_relaxed(fbi->base + LCCR0) | LCCR0_LDM;
+ writel_relaxed(lccr0, fbi->base + LCCR0);
wake_up(&fbi->ctrlr_wait);
}
- LCSR = lcsr;
+ writel_relaxed(lcsr, fbi->base + LCSR);
return IRQ_HANDLED;
}
switch (val) {
case CPUFREQ_ADJUST:
case CPUFREQ_INCOMPATIBLE:
- printk(KERN_DEBUG "min dma period: %d ps, "
+ dev_dbg(fbi->dev, "min dma period: %d ps, "
"new clock %d kHz\n", sa1100fb_min_dma_period(fbi),
policy->max);
/* todo: fill in min/max values */
* cache. Once this area is remapped, all virtual memory
* access to the video memory should occur at the new region.
*/
-static int __init sa1100fb_map_video_memory(struct sa1100fb_info *fbi)
+static int __devinit sa1100fb_map_video_memory(struct sa1100fb_info *fbi)
{
/*
* We reserve one page for the palette, plus the size
}
/* Fake monspecs to fill in fbinfo structure */
-static struct fb_monspecs monspecs __initdata = {
+static struct fb_monspecs monspecs __devinitdata = {
.hfmin = 30000,
.hfmax = 70000,
.vfmin = 50,
};
-static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
+static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev)
{
- struct sa1100fb_mach_info *inf;
+ struct sa1100fb_mach_info *inf = dev->platform_data;
struct sa1100fb_info *fbi;
+ unsigned i;
fbi = kmalloc(sizeof(struct sa1100fb_info) + sizeof(u32) * 16,
GFP_KERNEL);
fbi->rgb[RGB_8] = &rgb_8;
fbi->rgb[RGB_16] = &def_rgb_16;
- inf = sa1100fb_get_machine_info(fbi);
-
/*
* People just don't seem to get this. We don't support
* anything but correct entries now, so panic if someone
panic("sa1100fb error: invalid LCCR3 fields set or zero "
"pixclock.");
- fbi->max_xres = inf->xres;
fbi->fb.var.xres = inf->xres;
fbi->fb.var.xres_virtual = inf->xres;
- fbi->max_yres = inf->yres;
fbi->fb.var.yres = inf->yres;
fbi->fb.var.yres_virtual = inf->yres;
- fbi->max_bpp = inf->bpp;
fbi->fb.var.bits_per_pixel = inf->bpp;
fbi->fb.var.pixclock = inf->pixclock;
fbi->fb.var.hsync_len = inf->hsync_len;
fbi->fb.var.lower_margin = inf->lower_margin;
fbi->fb.var.sync = inf->sync;
fbi->fb.var.grayscale = inf->cmap_greyscale;
- fbi->cmap_inverse = inf->cmap_inverse;
- fbi->cmap_static = inf->cmap_static;
- fbi->lccr0 = inf->lccr0;
- fbi->lccr3 = inf->lccr3;
fbi->state = C_STARTUP;
fbi->task_state = (u_char)-1;
- fbi->fb.fix.smem_len = fbi->max_xres * fbi->max_yres *
- fbi->max_bpp / 8;
+ fbi->fb.fix.smem_len = inf->xres * inf->yres *
+ inf->bpp / 8;
+ fbi->inf = inf;
+
+ /* Copy the RGB bitfield overrides */
+ for (i = 0; i < NR_RGB; i++)
+ if (inf->rgb[i])
+ fbi->rgb[i] = inf->rgb[i];
init_waitqueue_head(&fbi->ctrlr_wait);
INIT_WORK(&fbi->task, sa1100fb_task);
static int __devinit sa1100fb_probe(struct platform_device *pdev)
{
struct sa1100fb_info *fbi;
+ struct resource *res;
int ret, irq;
+ if (!pdev->dev.platform_data) {
+ dev_err(&pdev->dev, "no platform LCD data\n");
+ return -EINVAL;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
- if (irq < 0)
+ if (irq < 0 || !res)
return -EINVAL;
- if (!request_mem_region(0xb0100000, 0x10000, "LCD"))
+ if (!request_mem_region(res->start, resource_size(res), "LCD"))
return -EBUSY;
fbi = sa1100fb_init_fbinfo(&pdev->dev);
if (!fbi)
goto failed;
+ fbi->base = ioremap(res->start, resource_size(res));
+ if (!fbi->base)
+ goto failed;
+
/* Initialize video memory */
ret = sa1100fb_map_video_memory(fbi);
if (ret)
ret = request_irq(irq, sa1100fb_handle_irq, 0, "LCD", fbi);
if (ret) {
- printk(KERN_ERR "sa1100fb: request_irq failed: %d\n", ret);
+ dev_err(&pdev->dev, "request_irq failed: %d\n", ret);
goto failed;
}
-#ifdef ASSABET_PAL_VIDEO
- if (machine_is_assabet())
- ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
-#endif
+ if (machine_is_shannon()) {
+ ret = gpio_request_one(SHANNON_GPIO_DISP_EN,
+ GPIOF_OUT_INIT_LOW, "display enable");
+ if (ret)
+ goto err_free_irq;
+ }
/*
* This makes sure that our colour bitfield
ret = register_framebuffer(&fbi->fb);
if (ret < 0)
- goto err_free_irq;
+ goto err_reg_fb;
#ifdef CONFIG_CPU_FREQ
fbi->freq_transition.notifier_call = sa1100fb_freq_transition;
/* This driver cannot be unloaded at the moment */
return 0;
+ err_reg_fb:
+ if (machine_is_shannon())
+ gpio_free(SHANNON_GPIO_DISP_EN);
err_free_irq:
free_irq(irq, fbi);
failed:
+ if (fbi)
+ iounmap(fbi->base);
platform_set_drvdata(pdev, NULL);
kfree(fbi);
- release_mem_region(0xb0100000, 0x10000);
+ release_mem_region(res->start, resource_size(res));
return ret;
}
.resume = sa1100fb_resume,
.driver = {
.name = "sa11x0-fb",
+ .owner = THIS_MODULE,
},
};
git.openpandora.org / pandora-kernel.git / blobdiff