DSS2: Add sysfs entry to for the alpha blending support.
[pandora-kernel.git] / drivers / video / pxafb.c
index 69de2fe..9720449 100644 (file)
 #include <linux/kthread.h>
 #include <linux/freezer.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/div64.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/bitfield.h>
-#include <asm/arch/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/bitfield.h>
+#include <mach/pxafb.h>
 
 /*
  * Complain if VAR is out of range.
@@ -1031,7 +1031,9 @@ static void pxafb_setup_gpio(struct pxafb_info *fbi)
        pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
        pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
        pxa_gpio_mode(GPIO76_LCD_PCLK_MD);
-       pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
+
+       if ((lccr0 & LCCR0_PAS) == 0)
+               pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
 }
 
 static void pxafb_enable_controller(struct pxafb_info *fbi)
@@ -1400,6 +1402,8 @@ static void pxafb_decode_mach_info(struct pxafb_info *fbi,
        if (lcd_conn == LCD_MONO_STN_8BPP)
                fbi->lccr0 |= LCCR0_DPD;
 
+       fbi->lccr0 |= (lcd_conn & LCD_ALTERNATE_MAPPING) ? LCCR0_LDDALT : 0;
+
        fbi->lccr3 = LCCR3_Acb((inf->lcd_conn >> 10) & 0xff);
        fbi->lccr3 |= (lcd_conn & LCD_BIAS_ACTIVE_LOW) ? LCCR3_OEP : 0;
        fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL)  ? LCCR3_PCP : 0;
@@ -1673,53 +1677,63 @@ MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)");
 #define pxafb_setup_options()          (0)
 #endif
 
-static int __devinit pxafb_probe(struct platform_device *dev)
-{
-       struct pxafb_info *fbi;
-       struct pxafb_mach_info *inf;
-       struct resource *r;
-       int irq, ret;
-
-       dev_dbg(&dev->dev, "pxafb_probe\n");
-
-       inf = dev->dev.platform_data;
-       ret = -ENOMEM;
-       fbi = NULL;
-       if (!inf)
-               goto failed;
-
-       ret = pxafb_parse_options(&dev->dev, g_options);
-       if (ret < 0)
-               goto failed;
-
 #ifdef DEBUG_VAR
-       /* Check for various illegal bit-combinations. Currently only
-        * a warning is given. */
+/* Check for various illegal bit-combinations. Currently only
+ * a warning is given. */
+static void __devinit pxafb_check_options(struct device *dev,
+                                         struct pxafb_mach_info *inf)
+{
+       if (inf->lcd_conn)
+               return;
 
        if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK)
-               dev_warn(&dev->dev, "machine LCCR0 setting contains "
+               dev_warn(dev, "machine LCCR0 setting contains "
                                "illegal bits: %08x\n",
                        inf->lccr0 & LCCR0_INVALID_CONFIG_MASK);
        if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK)
-               dev_warn(&dev->dev, "machine LCCR3 setting contains "
+               dev_warn(dev, "machine LCCR3 setting contains "
                                "illegal bits: %08x\n",
                        inf->lccr3 & LCCR3_INVALID_CONFIG_MASK);
        if (inf->lccr0 & LCCR0_DPD &&
            ((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas ||
             (inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl ||
             (inf->lccr0 & LCCR0_CMS) != LCCR0_Mono))
-               dev_warn(&dev->dev, "Double Pixel Data (DPD) mode is "
+               dev_warn(dev, "Double Pixel Data (DPD) mode is "
                                "only valid in passive mono"
                                " single panel mode\n");
        if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act &&
            (inf->lccr0 & LCCR0_SDS) == LCCR0_Dual)
-               dev_warn(&dev->dev, "Dual panel only valid in passive mode\n");
+               dev_warn(dev, "Dual panel only valid in passive mode\n");
        if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas &&
             (inf->modes->upper_margin || inf->modes->lower_margin))
-               dev_warn(&dev->dev, "Upper and lower margins must be 0 in "
+               dev_warn(dev, "Upper and lower margins must be 0 in "
                                "passive mode\n");
+}
+#else
+#define pxafb_check_options(...)       do {} while (0)
 #endif
 
+static int __devinit pxafb_probe(struct platform_device *dev)
+{
+       struct pxafb_info *fbi;
+       struct pxafb_mach_info *inf;
+       struct resource *r;
+       int irq, ret;
+
+       dev_dbg(&dev->dev, "pxafb_probe\n");
+
+       inf = dev->dev.platform_data;
+       ret = -ENOMEM;
+       fbi = NULL;
+       if (!inf)
+               goto failed;
+
+       ret = pxafb_parse_options(&dev->dev, g_options);
+       if (ret < 0)
+               goto failed;
+
+       pxafb_check_options(&dev->dev, inf);
+
        dev_dbg(&dev->dev, "got a %dx%dx%d LCD\n",
                        inf->modes->xres,
                        inf->modes->yres,