#include <linux/ktime.h>
#include <linux/hrtimer.h>
#include <linux/seq_file.h>
+#include <linux/semaphore.h>
-#include <plat/display.h>
+#include <video/omapdss.h>
#include "dss.h"
struct rfbi_reg { u16 idx; };
#define REG_FLD_MOD(idx, val, start, end) \
rfbi_write_reg(idx, FLD_MOD(rfbi_read_reg(idx), val, start, end))
-/* To work around an RFBI transfer rate limitation */
-#define OMAP_RFBI_RATE_LIMIT 1
-
enum omap_rfbi_cycleformat {
OMAP_DSS_RFBI_CYCLEFORMAT_1_1 = 0,
OMAP_DSS_RFBI_CYCLEFORMAT_2_1 = 1,
OMAP_DSS_RFBI_PARALLELMODE_16 = 3,
};
-enum update_cmd {
- RFBI_CMD_UPDATE = 0,
- RFBI_CMD_SYNC = 1,
-};
-
static int rfbi_convert_timings(struct rfbi_timings *t);
static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div);
struct omap_dss_device *dssdev[2];
- struct kfifo cmd_fifo;
- spinlock_t cmd_lock;
- struct completion cmd_done;
- atomic_t cmd_fifo_full;
- atomic_t cmd_pending;
+ struct semaphore bus_lock;
} rfbi;
-struct update_region {
- u16 x;
- u16 y;
- u16 w;
- u16 h;
-};
-
static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val)
{
__raw_writel(val, rfbi.base + idx.idx);
dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
}
+void rfbi_bus_lock(void)
+{
+ down(&rfbi.bus_lock);
+}
+EXPORT_SYMBOL(rfbi_bus_lock);
+
+void rfbi_bus_unlock(void)
+{
+ up(&rfbi.bus_lock);
+}
+EXPORT_SYMBOL(rfbi_bus_unlock);
+
void omap_rfbi_write_command(const void *buf, u32 len)
{
- rfbi_enable_clocks(1);
switch (rfbi.parallelmode) {
case OMAP_DSS_RFBI_PARALLELMODE_8:
{
default:
BUG();
}
- rfbi_enable_clocks(0);
}
EXPORT_SYMBOL(omap_rfbi_write_command);
void omap_rfbi_read_data(void *buf, u32 len)
{
- rfbi_enable_clocks(1);
switch (rfbi.parallelmode) {
case OMAP_DSS_RFBI_PARALLELMODE_8:
{
default:
BUG();
}
- rfbi_enable_clocks(0);
}
EXPORT_SYMBOL(omap_rfbi_read_data);
void omap_rfbi_write_data(const void *buf, u32 len)
{
- rfbi_enable_clocks(1);
switch (rfbi.parallelmode) {
case OMAP_DSS_RFBI_PARALLELMODE_8:
{
BUG();
}
- rfbi_enable_clocks(0);
}
EXPORT_SYMBOL(omap_rfbi_write_data);
int horiz_offset = scr_width - w;
int i;
- rfbi_enable_clocks(1);
-
if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 &&
rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) {
const u16 __iomem *pd = buf;
} else {
BUG();
}
-
- rfbi_enable_clocks(0);
}
EXPORT_SYMBOL(omap_rfbi_write_pixels);
-void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
+static void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
u16 height, void (*callback)(void *data), void *data)
{
u32 l;
rfbi.framedone_callback = callback;
rfbi.framedone_callback_data = data;
- rfbi_enable_clocks(1);
-
rfbi_write_reg(RFBI_PIXEL_CNT, width * height);
l = rfbi_read_reg(RFBI_CONTROL);
REG_FLD_MOD(RFBI_CONTROL, 0, 0, 0);
- rfbi_enable_clocks(0);
-
callback = rfbi.framedone_callback;
rfbi.framedone_callback = NULL;
if (callback != NULL)
callback(rfbi.framedone_callback_data);
-
- atomic_set(&rfbi.cmd_pending, 0);
}
#if 1 /* VERBOSE */
}
-void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t)
+static void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t)
{
int r;
BUG_ON(!t->converted);
- rfbi_enable_clocks(1);
rfbi_write_reg(RFBI_ONOFF_TIME(rfbi_module), t->tim[0]);
rfbi_write_reg(RFBI_CYCLE_TIME(rfbi_module), t->tim[1]);
(t->tim[2] ? 1 : 0), 4, 4);
rfbi_print_timings();
- rfbi_enable_clocks(0);
}
static int ps_to_rfbi_ticks(int time, int div)
return ret;
}
-#ifdef OMAP_RFBI_RATE_LIMIT
-unsigned long rfbi_get_max_tx_rate(void)
-{
- unsigned long l4_rate, dss1_rate;
- int min_l4_ticks = 0;
- int i;
-
- /* According to TI this can't be calculated so make the
- * adjustments for a couple of known frequencies and warn for
- * others.
- */
- static const struct {
- unsigned long l4_clk; /* HZ */
- unsigned long dss1_clk; /* HZ */
- unsigned long min_l4_ticks;
- } ftab[] = {
- { 55, 132, 7, }, /* 7.86 MPix/s */
- { 110, 110, 12, }, /* 9.16 MPix/s */
- { 110, 132, 10, }, /* 11 Mpix/s */
- { 120, 120, 10, }, /* 12 Mpix/s */
- { 133, 133, 10, }, /* 13.3 Mpix/s */
- };
-
- l4_rate = rfbi.l4_khz / 1000;
- dss1_rate = dss_clk_get_rate(DSS_CLK_FCK) / 1000000;
-
- for (i = 0; i < ARRAY_SIZE(ftab); i++) {
- /* Use a window instead of an exact match, to account
- * for different DPLL multiplier / divider pairs.
- */
- if (abs(ftab[i].l4_clk - l4_rate) < 3 &&
- abs(ftab[i].dss1_clk - dss1_rate) < 3) {
- min_l4_ticks = ftab[i].min_l4_ticks;
- break;
- }
- }
- if (i == ARRAY_SIZE(ftab)) {
- /* Can't be sure, return anyway the maximum not
- * rate-limited. This might cause a problem only for the
- * tearing synchronisation.
- */
- DSSERR("can't determine maximum RFBI transfer rate\n");
- return rfbi.l4_khz * 1000;
- }
- return rfbi.l4_khz * 1000 / min_l4_ticks;
-}
-#else
-int rfbi_get_max_tx_rate(void)
-{
- return rfbi.l4_khz * 1000;
-}
-#endif
-
static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div)
{
*clk_period = 1000000000 / rfbi.l4_khz;
DSSDBG("setup_te: mode %d hs %d vs %d hs_inv %d vs_inv %d\n",
mode, hs, vs, hs_pol_inv, vs_pol_inv);
- rfbi_enable_clocks(1);
rfbi_write_reg(RFBI_HSYNC_WIDTH, hs);
rfbi_write_reg(RFBI_VSYNC_WIDTH, vs);
l &= ~(1 << 20);
else
l |= 1 << 20;
- rfbi_enable_clocks(0);
return 0;
}
if (line > (1 << 11) - 1)
return -EINVAL;
- rfbi_enable_clocks(1);
l = rfbi_read_reg(RFBI_CONFIG(0));
l &= ~(0x3 << 2);
if (enable) {
rfbi.te_enabled = 0;
rfbi_write_reg(RFBI_CONFIG(0), l);
rfbi_write_reg(RFBI_LINE_NUMBER, line);
- rfbi_enable_clocks(0);
return 0;
}
EXPORT_SYMBOL(omap_rfbi_enable_te);
-#if 0
-static void rfbi_enable_config(int enable1, int enable2)
-{
- u32 l;
- int cs = 0;
-
- if (enable1)
- cs |= 1<<0;
- if (enable2)
- cs |= 1<<1;
-
- rfbi_enable_clocks(1);
-
- l = rfbi_read_reg(RFBI_CONTROL);
-
- l = FLD_MOD(l, cs, 3, 2);
- l = FLD_MOD(l, 0, 1, 1);
-
- rfbi_write_reg(RFBI_CONTROL, l);
-
-
- l = rfbi_read_reg(RFBI_CONFIG(0));
- l = FLD_MOD(l, 0, 3, 2); /* TRIGGERMODE: ITE */
- /*l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */
- /*l |= FLD_VAL(0, 8, 7); */ /* L4FORMAT, 1pix/L4 */
-
- l = FLD_MOD(l, 0, 16, 16); /* A0POLARITY */
- l = FLD_MOD(l, 1, 20, 20); /* TE_VSYNC_POLARITY */
- l = FLD_MOD(l, 1, 21, 21); /* HSYNCPOLARITY */
-
- l = FLD_MOD(l, OMAP_DSS_RFBI_PARALLELMODE_8, 1, 0);
- rfbi_write_reg(RFBI_CONFIG(0), l);
-
- rfbi_enable_clocks(0);
-}
-#endif
-
-int rfbi_configure(int rfbi_module, int bpp, int lines)
+static int rfbi_configure(int rfbi_module, int bpp, int lines)
{
u32 l;
int cycle1 = 0, cycle2 = 0, cycle3 = 0;
break;
}
- rfbi_enable_clocks(1);
-
REG_FLD_MOD(RFBI_CONTROL, 0, 3, 2); /* clear CS */
l = 0;
DSSDBG("RFBI config: bpp %d, lines %d, cycles: 0x%x 0x%x 0x%x\n",
bpp, lines, cycle1, cycle2, cycle3);
- rfbi_enable_clocks(0);
-
return 0;
}
-EXPORT_SYMBOL(rfbi_configure);
+
+int omap_rfbi_configure(struct omap_dss_device *dssdev, int pixel_size,
+ int data_lines)
+{
+ return rfbi_configure(dssdev->phy.rfbi.channel, pixel_size, data_lines);
+}
+EXPORT_SYMBOL(omap_rfbi_configure);
int omap_rfbi_prepare_update(struct omap_dss_device *dssdev,
u16 *x, u16 *y, u16 *w, u16 *h)
{
int r;
+ rfbi_enable_clocks(1);
+
r = omap_dss_start_device(dssdev);
if (r) {
DSSERR("failed to start device\n");
omap_dispc_unregister_isr(framedone_callback, NULL,
DISPC_IRQ_FRAMEDONE);
omap_dss_stop_device(dssdev);
+
+ rfbi_enable_clocks(0);
}
EXPORT_SYMBOL(omapdss_rfbi_display_disable);
rfbi.pdev = pdev;
- spin_lock_init(&rfbi.cmd_lock);
-
- init_completion(&rfbi.cmd_done);
- atomic_set(&rfbi.cmd_fifo_full, 0);
- atomic_set(&rfbi.cmd_pending, 0);
+ sema_init(&rfbi.bus_lock, 1);
rfbi_mem = platform_get_resource(rfbi.pdev, IORESOURCE_MEM, 0);
if (!rfbi_mem) {
git.openpandora.org / pandora-kernel.git / blobdiff