* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/gfp.h>
#include <asm/unaligned.h>
#include "xhci.h"
#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
PORT_RC | PORT_PLC | PORT_PE)
+/* usb 1.1 root hub device descriptor */
+static u8 usb_bos_descriptor [] = {
+ USB_DT_BOS_SIZE, /* __u8 bLength, 5 bytes */
+ USB_DT_BOS, /* __u8 bDescriptorType */
+ 0x0F, 0x00, /* __le16 wTotalLength, 15 bytes */
+ 0x1, /* __u8 bNumDeviceCaps */
+ /* First device capability */
+ USB_DT_USB_SS_CAP_SIZE, /* __u8 bLength, 10 bytes */
+ USB_DT_DEVICE_CAPABILITY, /* Device Capability */
+ USB_SS_CAP_TYPE, /* bDevCapabilityType, SUPERSPEED_USB */
+ 0x00, /* bmAttributes, LTM off by default */
+ USB_5GBPS_OPERATION, 0x00, /* wSpeedsSupported, 5Gbps only */
+ 0x03, /* bFunctionalitySupport,
+ USB 3.0 speed only */
+ 0x00, /* bU1DevExitLat, set later. */
+ 0x00, 0x00 /* __le16 bU2DevExitLat, set later. */
+};
+
+
static void xhci_common_hub_descriptor(struct xhci_hcd *xhci,
struct usb_hub_descriptor *desc, int ports)
{
*/
memset(port_removable, 0, sizeof(port_removable));
for (i = 0; i < ports; i++) {
- portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
+ portsc = xhci_readl(xhci, xhci->usb2_ports[i]);
/* If a device is removable, PORTSC reports a 0, same as in the
* hub descriptor DeviceRemovable bits.
*/
continue;
speed = xhci->devs[i]->udev->speed;
if (((speed == USB_SPEED_SUPER) == (hcd->speed == HCD_USB3))
- && xhci->devs[i]->port == port) {
+ && xhci->devs[i]->fake_port == port) {
slot_id = i;
break;
}
return max_ports;
}
+void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
+ int port_id, u32 link_state)
+{
+ u32 temp;
+
+ temp = xhci_readl(xhci, port_array[port_id]);
+ temp = xhci_port_state_to_neutral(temp);
+ temp &= ~PORT_PLS_MASK;
+ temp |= PORT_LINK_STROBE | link_state;
+ xhci_writel(xhci, temp, port_array[port_id]);
+}
+
+/* Test and clear port RWC bit */
+void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
+ int port_id, u32 port_bit)
+{
+ u32 temp;
+
+ temp = xhci_readl(xhci, port_array[port_id]);
+ if (temp & port_bit) {
+ temp = xhci_port_state_to_neutral(temp);
+ temp |= port_bit;
+ xhci_writel(xhci, temp, port_array[port_id]);
+ }
+}
+
+/* Updates Link Status for super Speed port */
+static void xhci_hub_report_link_state(u32 *status, u32 status_reg)
+{
+ u32 pls = status_reg & PORT_PLS_MASK;
+
+ /* resume state is a xHCI internal state.
+ * Do not report it to usb core.
+ */
+ if (pls == XDEV_RESUME)
+ return;
+
+ /* When the CAS bit is set then warm reset
+ * should be performed on port
+ */
+ if (status_reg & PORT_CAS) {
+ /* The CAS bit can be set while the port is
+ * in any link state.
+ * Only roothubs have CAS bit, so we
+ * pretend to be in compliance mode
+ * unless we're already in compliance
+ * or the inactive state.
+ */
+ if (pls != USB_SS_PORT_LS_COMP_MOD &&
+ pls != USB_SS_PORT_LS_SS_INACTIVE) {
+ pls = USB_SS_PORT_LS_COMP_MOD;
+ }
+ /* Return also connection bit -
+ * hub state machine resets port
+ * when this bit is set.
+ */
+ pls |= USB_PORT_STAT_CONNECTION;
+ } else {
+ /*
+ * If CAS bit isn't set but the Port is already at
+ * Compliance Mode, fake a connection so the USB core
+ * notices the Compliance state and resets the port.
+ * This resolves an issue generated by the SN65LVPE502CP
+ * in which sometimes the port enters compliance mode
+ * caused by a delay on the host-device negotiation.
+ */
+ if (pls == USB_SS_PORT_LS_COMP_MOD)
+ pls |= USB_PORT_STAT_CONNECTION;
+ }
+
+ /* update status field */
+ *status |= pls;
+}
+
+/*
+ * Function for Compliance Mode Quirk.
+ *
+ * This Function verifies if all xhc USB3 ports have entered U0, if so,
+ * the compliance mode timer is deleted. A port won't enter
+ * compliance mode if it has previously entered U0.
+ */
+void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex)
+{
+ u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1);
+ bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0);
+
+ if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK))
+ return;
+
+ if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) {
+ xhci->port_status_u0 |= 1 << wIndex;
+ if (xhci->port_status_u0 == all_ports_seen_u0) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "All USB3 ports have entered U0 already!\n");
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted.\n");
+ }
+ }
+}
+
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int max_ports;
unsigned long flags;
- u32 temp, temp1, status;
+ u32 temp, status;
int retval = 0;
__le32 __iomem **port_array;
int slot_id;
xhci_hub_descriptor(hcd, xhci,
(struct usb_hub_descriptor *) buf);
break;
+ case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+ if ((wValue & 0xff00) != (USB_DT_BOS << 8))
+ goto error;
+
+ if (hcd->speed != HCD_USB3)
+ goto error;
+
+ memcpy(buf, &usb_bos_descriptor,
+ USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE);
+ temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
+ buf[12] = HCS_U1_LATENCY(temp);
+ put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]);
+
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE;
case GetPortStatus:
if (!wIndex || wIndex > max_ports)
goto error;
xhci_dbg(xhci, "Resume USB2 port %d\n",
wIndex + 1);
bus_state->resume_done[wIndex] = 0;
- temp1 = xhci_port_state_to_neutral(temp);
- temp1 &= ~PORT_PLS_MASK;
- temp1 |= PORT_LINK_STROBE | XDEV_U0;
- xhci_writel(xhci, temp1, port_array[wIndex]);
-
+ xhci_set_link_state(xhci, port_array, wIndex,
+ XDEV_U0);
xhci_dbg(xhci, "set port %d resume\n",
wIndex + 1);
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
else
status |= USB_PORT_STAT_POWER;
}
- /* Port Link State */
+ /* Update Port Link State for super speed ports*/
if (hcd->speed == HCD_USB3) {
- /* resume state is a xHCI internal state.
- * Do not report it to usb core.
+ xhci_hub_report_link_state(&status, temp);
+ /*
+ * Verify if all USB3 Ports Have entered U0 already.
+ * Delete Compliance Mode Timer if so.
*/
- if ((temp & PORT_PLS_MASK) != XDEV_RESUME)
- status |= (temp & PORT_PLS_MASK);
+ xhci_del_comp_mod_timer(xhci, temp, wIndex);
}
if (bus_state->port_c_suspend & (1 << wIndex))
status |= 1 << USB_PORT_FEAT_C_SUSPEND;
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
temp = xhci_readl(xhci, port_array[wIndex]);
+ if ((temp & PORT_PLS_MASK) != XDEV_U0) {
+ /* Resume the port to U0 first */
+ xhci_set_link_state(xhci, port_array, wIndex,
+ XDEV_U0);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ msleep(10);
+ spin_lock_irqsave(&xhci->lock, flags);
+ }
/* In spec software should not attempt to suspend
* a port unless the port reports that it is in the
* enabled (PED = ‘1’,PLS < ‘3’) state.
*/
+ temp = xhci_readl(xhci, port_array[wIndex]);
if ((temp & PORT_PE) == 0 || (temp & PORT_RESET)
|| (temp & PORT_PLS_MASK) >= XDEV_U3) {
xhci_warn(xhci, "USB core suspending device "
xhci_stop_device(xhci, slot_id, 1);
spin_lock_irqsave(&xhci->lock, flags);
- temp = xhci_port_state_to_neutral(temp);
- temp &= ~PORT_PLS_MASK;
- temp |= PORT_LINK_STROBE | XDEV_U3;
- xhci_writel(xhci, temp, port_array[wIndex]);
+ xhci_set_link_state(xhci, port_array, wIndex, XDEV_U3);
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(10); /* wait device to enter */
}
}
- temp = xhci_port_state_to_neutral(temp);
- temp &= ~PORT_PLS_MASK;
- temp |= PORT_LINK_STROBE | link_state;
- xhci_writel(xhci, temp, port_array[wIndex]);
+ xhci_set_link_state(xhci, port_array, wIndex,
+ link_state);
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(20); /* wait device to enter */
if ((temp & PORT_PE) == 0)
goto error;
- temp = xhci_port_state_to_neutral(temp);
- temp &= ~PORT_PLS_MASK;
- temp |= PORT_LINK_STROBE | XDEV_RESUME;
- xhci_writel(xhci, temp,
- port_array[wIndex]);
-
- spin_unlock_irqrestore(&xhci->lock,
- flags);
+ xhci_set_link_state(xhci, port_array, wIndex,
+ XDEV_RESUME);
+ spin_unlock_irqrestore(&xhci->lock, flags);
msleep(20);
spin_lock_irqsave(&xhci->lock, flags);
-
- temp = xhci_readl(xhci,
- port_array[wIndex]);
- temp = xhci_port_state_to_neutral(temp);
- temp &= ~PORT_PLS_MASK;
- temp |= PORT_LINK_STROBE | XDEV_U0;
- xhci_writel(xhci, temp,
- port_array[wIndex]);
+ xhci_set_link_state(xhci, port_array, wIndex,
+ XDEV_U0);
}
bus_state->port_c_suspend |= 1 << wIndex;
if (test_bit(port_index, &bus_state->bus_suspended) &&
(temp & PORT_PLS_MASK)) {
if (DEV_SUPERSPEED(temp)) {
- temp = xhci_port_state_to_neutral(temp);
- temp &= ~PORT_PLS_MASK;
- temp |= PORT_LINK_STROBE | XDEV_U0;
- xhci_writel(xhci, temp, port_array[port_index]);
+ xhci_set_link_state(xhci, port_array,
+ port_index, XDEV_U0);
} else {
- temp = xhci_port_state_to_neutral(temp);
- temp &= ~PORT_PLS_MASK;
- temp |= PORT_LINK_STROBE | XDEV_RESUME;
- xhci_writel(xhci, temp, port_array[port_index]);
+ xhci_set_link_state(xhci, port_array,
+ port_index, XDEV_RESUME);
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(20);
spin_lock_irqsave(&xhci->lock, flags);
- temp = xhci_readl(xhci, port_array[port_index]);
- temp = xhci_port_state_to_neutral(temp);
- temp &= ~PORT_PLS_MASK;
- temp |= PORT_LINK_STROBE | XDEV_U0;
- xhci_writel(xhci, temp, port_array[port_index]);
+ xhci_set_link_state(xhci, port_array,
+ port_index, XDEV_U0);
}
/* wait for the port to enter U0 and report port link
* state change.
spin_lock_irqsave(&xhci->lock, flags);
/* Clear PLC */
- temp = xhci_readl(xhci, port_array[port_index]);
- if (temp & PORT_PLC) {
- temp = xhci_port_state_to_neutral(temp);
- temp |= PORT_PLC;
- xhci_writel(xhci, temp, port_array[port_index]);
- }
+ xhci_test_and_clear_bit(xhci, port_array, port_index,
+ PORT_PLC);
slot_id = xhci_find_slot_id_by_port(hcd,
xhci, port_index + 1);
git.openpandora.org / pandora-kernel.git / blobdiff