#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/types.h>
-#include <linux/version.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/proc_fs.h>
#include <linux/mm.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <asm/byteorder.h>
* pxa2xx_ep_alloc_request - allocate a request data structure
*/
static struct usb_request *
-pxa2xx_ep_alloc_request (struct usb_ep *_ep, unsigned gfp_flags)
+pxa2xx_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
{
struct pxa2xx_request *req;
*/
static void *
pxa2xx_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
- dma_addr_t *dma, unsigned gfp_flags)
+ dma_addr_t *dma, gfp_t gfp_flags)
{
char *retval;
}
static int
-write_packet(volatile unsigned long *uddr, struct pxa2xx_request *req, unsigned max)
+write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max)
{
u8 *buf;
unsigned length, count;
/*-------------------------------------------------------------------------*/
static int
-pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags)
+pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
{
struct pxa2xx_request *req;
struct pxa2xx_ep *ep;
* VBUS IRQs should probably be ignored so that the PXA device just acts
* "dead" to USB hosts until system resume.
*/
-static int pxa2xx_udc_suspend(struct device *dev, pm_message_t state, u32 level)
+static int pxa2xx_udc_suspend(struct device *dev, pm_message_t state)
{
struct pxa2xx_udc *udc = dev_get_drvdata(dev);
- if (level == SUSPEND_POWER_DOWN) {
- if (!udc->mach->udc_command)
- WARN("USB host won't detect disconnect!\n");
- pullup(udc, 0);
- }
+ if (!udc->mach->udc_command)
+ WARN("USB host won't detect disconnect!\n");
+ pullup(udc, 0);
+
return 0;
}
-static int pxa2xx_udc_resume(struct device *dev, u32 level)
+static int pxa2xx_udc_resume(struct device *dev)
{
struct pxa2xx_udc *udc = dev_get_drvdata(dev);
- if (level == RESUME_POWER_ON)
- pullup(udc, 1);
+ pullup(udc, 1);
+
return 0;
}
static struct device_driver udc_driver = {
.name = "pxa2xx-udc",
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = pxa2xx_udc_probe,
.shutdown = pxa2xx_udc_shutdown,