#include <asm/sh_bios.h>
#endif
-#ifdef CONFIG_H8300
-#include <asm/gpio.h>
-#endif
-
#include "sh-sci.h"
struct sci_port {
/* Platform configuration */
struct plat_sci_port *cfg;
- /* Port enable callback */
- void (*enable)(struct uart_port *port);
-
- /* Port disable callback */
- void (*disable)(struct uart_port *port);
-
/* Break timer */
struct timer_list break_timer;
int break_flag;
/* Function clock */
struct clk *fclk;
+ char *irqstr[SCIx_NR_IRQS];
+
struct dma_chan *chan_tx;
struct dma_chan *chan_rx;
return container_of(uart, struct sci_port, port);
}
+struct plat_sci_reg {
+ u8 offset, size;
+};
+
+/* Helper for invalidating specific entries of an inherited map. */
+#define sci_reg_invalid { .offset = 0, .size = 0 }
+
+static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
+ [SCIx_PROBE_REGTYPE] = {
+ [0 ... SCIx_NR_REGS - 1] = sci_reg_invalid,
+ },
+
+ /*
+ * Common SCI definitions, dependent on the port's regshift
+ * value.
+ */
+ [SCIx_SCI_REGTYPE] = {
+ [SCSMR] = { 0x00, 8 },
+ [SCBRR] = { 0x01, 8 },
+ [SCSCR] = { 0x02, 8 },
+ [SCxTDR] = { 0x03, 8 },
+ [SCxSR] = { 0x04, 8 },
+ [SCxRDR] = { 0x05, 8 },
+ [SCFCR] = sci_reg_invalid,
+ [SCFDR] = sci_reg_invalid,
+ [SCTFDR] = sci_reg_invalid,
+ [SCRFDR] = sci_reg_invalid,
+ [SCSPTR] = sci_reg_invalid,
+ [SCLSR] = sci_reg_invalid,
+ },
+
+ /*
+ * Common definitions for legacy IrDA ports, dependent on
+ * regshift value.
+ */
+ [SCIx_IRDA_REGTYPE] = {
+ [SCSMR] = { 0x00, 8 },
+ [SCBRR] = { 0x01, 8 },
+ [SCSCR] = { 0x02, 8 },
+ [SCxTDR] = { 0x03, 8 },
+ [SCxSR] = { 0x04, 8 },
+ [SCxRDR] = { 0x05, 8 },
+ [SCFCR] = { 0x06, 8 },
+ [SCFDR] = { 0x07, 16 },
+ [SCTFDR] = sci_reg_invalid,
+ [SCRFDR] = sci_reg_invalid,
+ [SCSPTR] = sci_reg_invalid,
+ [SCLSR] = sci_reg_invalid,
+ },
+
+ /*
+ * Common SCIFA definitions.
+ */
+ [SCIx_SCIFA_REGTYPE] = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x20, 8 },
+ [SCxSR] = { 0x14, 16 },
+ [SCxRDR] = { 0x24, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCTFDR] = sci_reg_invalid,
+ [SCRFDR] = sci_reg_invalid,
+ [SCSPTR] = sci_reg_invalid,
+ [SCLSR] = sci_reg_invalid,
+ },
+
+ /*
+ * Common SCIFB definitions.
+ */
+ [SCIx_SCIFB_REGTYPE] = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x40, 8 },
+ [SCxSR] = { 0x14, 16 },
+ [SCxRDR] = { 0x60, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCTFDR] = sci_reg_invalid,
+ [SCRFDR] = sci_reg_invalid,
+ [SCSPTR] = sci_reg_invalid,
+ [SCLSR] = sci_reg_invalid,
+ },
+
+ /*
+ * Common SH-3 SCIF definitions.
+ */
+ [SCIx_SH3_SCIF_REGTYPE] = {
+ [SCSMR] = { 0x00, 8 },
+ [SCBRR] = { 0x02, 8 },
+ [SCSCR] = { 0x04, 8 },
+ [SCxTDR] = { 0x06, 8 },
+ [SCxSR] = { 0x08, 16 },
+ [SCxRDR] = { 0x0a, 8 },
+ [SCFCR] = { 0x0c, 8 },
+ [SCFDR] = { 0x0e, 16 },
+ [SCTFDR] = sci_reg_invalid,
+ [SCRFDR] = sci_reg_invalid,
+ [SCSPTR] = sci_reg_invalid,
+ [SCLSR] = sci_reg_invalid,
+ },
+
+ /*
+ * Common SH-4(A) SCIF(B) definitions.
+ */
+ [SCIx_SH4_SCIF_REGTYPE] = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x0c, 8 },
+ [SCxSR] = { 0x10, 16 },
+ [SCxRDR] = { 0x14, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCTFDR] = sci_reg_invalid,
+ [SCRFDR] = sci_reg_invalid,
+ [SCSPTR] = { 0x20, 16 },
+ [SCLSR] = { 0x24, 16 },
+ },
+
+ /*
+ * Common SH-4(A) SCIF(B) definitions for ports without an SCSPTR
+ * register.
+ */
+ [SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE] = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x0c, 8 },
+ [SCxSR] = { 0x10, 16 },
+ [SCxRDR] = { 0x14, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCTFDR] = sci_reg_invalid,
+ [SCRFDR] = sci_reg_invalid,
+ [SCSPTR] = sci_reg_invalid,
+ [SCLSR] = { 0x24, 16 },
+ },
+
+ /*
+ * Common SH-4(A) SCIF(B) definitions for ports with FIFO data
+ * count registers.
+ */
+ [SCIx_SH4_SCIF_FIFODATA_REGTYPE] = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x0c, 8 },
+ [SCxSR] = { 0x10, 16 },
+ [SCxRDR] = { 0x14, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCTFDR] = { 0x1c, 16 }, /* aliased to SCFDR */
+ [SCRFDR] = { 0x20, 16 },
+ [SCSPTR] = { 0x24, 16 },
+ [SCLSR] = { 0x28, 16 },
+ },
+
+ /*
+ * SH7705-style SCIF(B) ports, lacking both SCSPTR and SCLSR
+ * registers.
+ */
+ [SCIx_SH7705_SCIF_REGTYPE] = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x20, 8 },
+ [SCxSR] = { 0x14, 16 },
+ [SCxRDR] = { 0x24, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCTFDR] = sci_reg_invalid,
+ [SCRFDR] = sci_reg_invalid,
+ [SCSPTR] = sci_reg_invalid,
+ [SCLSR] = sci_reg_invalid,
+ },
+};
+
+#define sci_getreg(up, offset) (sci_regmap[to_sci_port(up)->cfg->regtype] + offset)
+
+/*
+ * The "offset" here is rather misleading, in that it refers to an enum
+ * value relative to the port mapping rather than the fixed offset
+ * itself, which needs to be manually retrieved from the platform's
+ * register map for the given port.
+ */
+static unsigned int sci_serial_in(struct uart_port *p, int offset)
+{
+ struct plat_sci_reg *reg = sci_getreg(p, offset);
+
+ if (reg->size == 8)
+ return ioread8(p->membase + (reg->offset << p->regshift));
+ else if (reg->size == 16)
+ return ioread16(p->membase + (reg->offset << p->regshift));
+ else
+ WARN(1, "Invalid register access\n");
+
+ return 0;
+}
+
+static void sci_serial_out(struct uart_port *p, int offset, int value)
+{
+ struct plat_sci_reg *reg = sci_getreg(p, offset);
+
+ if (reg->size == 8)
+ iowrite8(value, p->membase + (reg->offset << p->regshift));
+ else if (reg->size == 16)
+ iowrite16(value, p->membase + (reg->offset << p->regshift));
+ else
+ WARN(1, "Invalid register access\n");
+}
+
+#define sci_in(up, offset) (up->serial_in(up, offset))
+#define sci_out(up, offset, value) (up->serial_out(up, offset, value))
+
+static int sci_probe_regmap(struct plat_sci_port *cfg)
+{
+ switch (cfg->type) {
+ case PORT_SCI:
+ cfg->regtype = SCIx_SCI_REGTYPE;
+ break;
+ case PORT_IRDA:
+ cfg->regtype = SCIx_IRDA_REGTYPE;
+ break;
+ case PORT_SCIFA:
+ cfg->regtype = SCIx_SCIFA_REGTYPE;
+ break;
+ case PORT_SCIFB:
+ cfg->regtype = SCIx_SCIFB_REGTYPE;
+ break;
+ case PORT_SCIF:
+ /*
+ * The SH-4 is a bit of a misnomer here, although that's
+ * where this particular port layout originated. This
+ * configuration (or some slight variation thereof)
+ * remains the dominant model for all SCIFs.
+ */
+ cfg->regtype = SCIx_SH4_SCIF_REGTYPE;
+ break;
+ default:
+ printk(KERN_ERR "Can't probe register map for given port\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void sci_port_enable(struct sci_port *sci_port)
+{
+ if (!sci_port->port.dev)
+ return;
+
+ pm_runtime_get_sync(sci_port->port.dev);
+
+ clk_enable(sci_port->iclk);
+ sci_port->port.uartclk = clk_get_rate(sci_port->iclk);
+ clk_enable(sci_port->fclk);
+}
+
+static void sci_port_disable(struct sci_port *sci_port)
+{
+ if (!sci_port->port.dev)
+ return;
+
+ clk_disable(sci_port->fclk);
+ clk_disable(sci_port->iclk);
+
+ pm_runtime_put_sync(sci_port->port.dev);
+}
+
#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
#ifdef CONFIG_CONSOLE_POLL
}
#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
-#if defined(__H8300H__) || defined(__H8300S__)
static void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
- int ch = (port->mapbase - SMR0) >> 3;
-
- /* set DDR regs */
- H8300_GPIO_DDR(h8300_sci_pins[ch].port,
- h8300_sci_pins[ch].rx,
- H8300_GPIO_INPUT);
- H8300_GPIO_DDR(h8300_sci_pins[ch].port,
- h8300_sci_pins[ch].tx,
- H8300_GPIO_OUTPUT);
-
- /* tx mark output*/
- H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
-static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
-{
- if (port->mapbase == 0xA4400000) {
- __raw_writew(__raw_readw(PACR) & 0xffc0, PACR);
- __raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR);
- } else if (port->mapbase == 0xA4410000)
- __raw_writew(__raw_readw(PBCR) & 0xf003, PBCR);
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7721)
-static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
-{
- unsigned short data;
-
- if (cflag & CRTSCTS) {
- /* enable RTS/CTS */
- if (port->mapbase == 0xa4430000) { /* SCIF0 */
- /* Clear PTCR bit 9-2; enable all scif pins but sck */
- data = __raw_readw(PORT_PTCR);
- __raw_writew((data & 0xfc03), PORT_PTCR);
- } else if (port->mapbase == 0xa4438000) { /* SCIF1 */
- /* Clear PVCR bit 9-2 */
- data = __raw_readw(PORT_PVCR);
- __raw_writew((data & 0xfc03), PORT_PVCR);
- }
- } else {
- if (port->mapbase == 0xa4430000) { /* SCIF0 */
- /* Clear PTCR bit 5-2; enable only tx and rx */
- data = __raw_readw(PORT_PTCR);
- __raw_writew((data & 0xffc3), PORT_PTCR);
- } else if (port->mapbase == 0xa4438000) { /* SCIF1 */
- /* Clear PVCR bit 5-2 */
- data = __raw_readw(PORT_PVCR);
- __raw_writew((data & 0xffc3), PORT_PVCR);
- }
- }
-}
-#elif defined(CONFIG_CPU_SH3)
-/* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */
-static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
-{
- unsigned short data;
-
- /* We need to set SCPCR to enable RTS/CTS */
- data = __raw_readw(SCPCR);
- /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
- __raw_writew(data & 0x0fcf, SCPCR);
-
- if (!(cflag & CRTSCTS)) {
- /* We need to set SCPCR to enable RTS/CTS */
- data = __raw_readw(SCPCR);
- /* Clear out SCP7MD1,0, SCP4MD1,0,
- Set SCP6MD1,0 = {01} (output) */
- __raw_writew((data & 0x0fcf) | 0x1000, SCPCR);
+ struct sci_port *s = to_sci_port(port);
+ struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR;
- data = __raw_readb(SCPDR);
- /* Set /RTS2 (bit6) = 0 */
- __raw_writeb(data & 0xbf, SCPDR);
+ /*
+ * Use port-specific handler if provided.
+ */
+ if (s->cfg->ops && s->cfg->ops->init_pins) {
+ s->cfg->ops->init_pins(port, cflag);
+ return;
}
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
-static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
-{
- unsigned short data;
- if (port->mapbase == 0xffe00000) {
- data = __raw_readw(PSCR);
- data &= ~0x03cf;
- if (!(cflag & CRTSCTS))
- data |= 0x0340;
+ /*
+ * For the generic path SCSPTR is necessary. Bail out if that's
+ * unavailable, too.
+ */
+ if (!reg->size)
+ return;
- __raw_writew(data, PSCR);
- }
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \
- defined(CONFIG_CPU_SUBTYPE_SH7763) || \
- defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7785) || \
- defined(CONFIG_CPU_SUBTYPE_SH7786) || \
- defined(CONFIG_CPU_SUBTYPE_SHX3)
-static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
-{
- if (!(cflag & CRTSCTS))
- __raw_writew(0x0080, SCSPTR0); /* Set RTS = 1 */
-}
-#elif defined(CONFIG_CPU_SH4) && !defined(CONFIG_CPU_SH4A)
-static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
-{
if (!(cflag & CRTSCTS))
- __raw_writew(0x0080, SCSPTR2); /* Set RTS = 1 */
+ sci_out(port, SCSPTR, 0x0080); /* Set RTS = 1 */
}
-#else
-static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
-{
- /* Nothing to do */
-}
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
- defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7785) || \
- defined(CONFIG_CPU_SUBTYPE_SH7786)
-static int scif_txfill(struct uart_port *port)
+static int sci_txfill(struct uart_port *port)
{
- return sci_in(port, SCTFDR) & 0xff;
-}
+ struct plat_sci_reg *reg;
-static int scif_txroom(struct uart_port *port)
-{
- return SCIF_TXROOM_MAX - scif_txfill(port);
-}
-
-static int scif_rxfill(struct uart_port *port)
-{
- return sci_in(port, SCRFDR) & 0xff;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
-static int scif_txfill(struct uart_port *port)
-{
- if (port->mapbase == 0xffe00000 ||
- port->mapbase == 0xffe08000)
- /* SCIF0/1*/
+ reg = sci_getreg(port, SCTFDR);
+ if (reg->size)
return sci_in(port, SCTFDR) & 0xff;
- else
- /* SCIF2 */
+
+ reg = sci_getreg(port, SCFDR);
+ if (reg->size)
return sci_in(port, SCFDR) >> 8;
-}
-static int scif_txroom(struct uart_port *port)
-{
- if (port->mapbase == 0xffe00000 ||
- port->mapbase == 0xffe08000)
- /* SCIF0/1*/
- return SCIF_TXROOM_MAX - scif_txfill(port);
- else
- /* SCIF2 */
- return SCIF2_TXROOM_MAX - scif_txfill(port);
+ return !(sci_in(port, SCxSR) & SCI_TDRE);
}
-static int scif_rxfill(struct uart_port *port)
-{
- if ((port->mapbase == 0xffe00000) ||
- (port->mapbase == 0xffe08000)) {
- /* SCIF0/1*/
- return sci_in(port, SCRFDR) & 0xff;
- } else {
- /* SCIF2 */
- return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
- }
-}
-#elif defined(CONFIG_ARCH_SH7372)
-static int scif_txfill(struct uart_port *port)
+static int sci_txroom(struct uart_port *port)
{
- if (port->type == PORT_SCIFA)
- return sci_in(port, SCFDR) >> 8;
- else
- return sci_in(port, SCTFDR);
+ return port->fifosize - sci_txfill(port);
}
-static int scif_txroom(struct uart_port *port)
+static int sci_rxfill(struct uart_port *port)
{
- return port->fifosize - scif_txfill(port);
-}
+ struct plat_sci_reg *reg;
-static int scif_rxfill(struct uart_port *port)
-{
- if (port->type == PORT_SCIFA)
- return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
- else
- return sci_in(port, SCRFDR);
-}
-#else
-static int scif_txfill(struct uart_port *port)
-{
- return sci_in(port, SCFDR) >> 8;
-}
+ reg = sci_getreg(port, SCRFDR);
+ if (reg->size)
+ return sci_in(port, SCRFDR) & 0xff;
-static int scif_txroom(struct uart_port *port)
-{
- return SCIF_TXROOM_MAX - scif_txfill(port);
-}
+ reg = sci_getreg(port, SCFDR);
+ if (reg->size)
+ return sci_in(port, SCFDR) & ((port->fifosize << 1) - 1);
-static int scif_rxfill(struct uart_port *port)
-{
- return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
+ return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0;
}
-#endif
-static int sci_txfill(struct uart_port *port)
+/*
+ * SCI helper for checking the state of the muxed port/RXD pins.
+ */
+static inline int sci_rxd_in(struct uart_port *port)
{
- return !(sci_in(port, SCxSR) & SCI_TDRE);
-}
+ struct sci_port *s = to_sci_port(port);
-static int sci_txroom(struct uart_port *port)
-{
- return !sci_txfill(port);
-}
+ if (s->cfg->port_reg <= 0)
+ return 1;
-static int sci_rxfill(struct uart_port *port)
-{
- return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0;
+ return !!__raw_readb(s->cfg->port_reg);
}
/* ********************************************************************** *
return;
}
- if (port->type == PORT_SCI)
- count = sci_txroom(port);
- else
- count = scif_txroom(port);
+ count = sci_txroom(port);
do {
unsigned char c;
return;
while (1) {
- if (port->type == PORT_SCI)
- count = sci_rxfill(port);
- else
- count = scif_rxfill(port);
-
/* Don't copy more bytes than there is room for in the buffer */
- count = tty_buffer_request_room(tty, count);
+ count = tty_buffer_request_room(tty, sci_rxfill(port));
/* If for any reason we can't copy more data, we're done! */
if (count == 0)
{
struct sci_port *port = (struct sci_port *)data;
- if (port->enable)
- port->enable(&port->port);
+ sci_port_enable(port);
if (sci_rxd_in(&port->port) == 0) {
port->break_flag = 1;
} else
port->break_flag = 0;
- if (port->disable)
- port->disable(&port->port);
+ sci_port_disable(port);
}
static int sci_handle_errors(struct uart_port *port)
int copied = 0;
unsigned short status = sci_in(port, SCxSR);
struct tty_struct *tty = port->state->port.tty;
+ struct sci_port *s = to_sci_port(port);
- if (status & SCxSR_ORER(port)) {
- /* overrun error */
- if (tty_insert_flip_char(tty, 0, TTY_OVERRUN))
- copied++;
+ /*
+ * Handle overruns, if supported.
+ */
+ if (s->cfg->overrun_bit != SCIx_NOT_SUPPORTED) {
+ if (status & (1 << s->cfg->overrun_bit)) {
+ /* overrun error */
+ if (tty_insert_flip_char(tty, 0, TTY_OVERRUN))
+ copied++;
- dev_notice(port->dev, "overrun error");
+ dev_notice(port->dev, "overrun error");
+ }
}
if (status & SCxSR_FER(port)) {
static int sci_handle_fifo_overrun(struct uart_port *port)
{
struct tty_struct *tty = port->state->port.tty;
+ struct sci_port *s = to_sci_port(port);
+ struct plat_sci_reg *reg;
int copied = 0;
- if (port->type != PORT_SCIF)
+ reg = sci_getreg(port, SCLSR);
+ if (!reg->size)
return 0;
- if ((sci_in(port, SCLSR) & SCIF_ORER) != 0) {
+ if ((sci_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) {
sci_out(port, SCLSR, 0);
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
return NOTIFY_OK;
}
-static void sci_clk_enable(struct uart_port *port)
-{
- struct sci_port *sci_port = to_sci_port(port);
-
- pm_runtime_get_sync(port->dev);
+static struct sci_irq_desc {
+ const char *desc;
+ irq_handler_t handler;
+} sci_irq_desc[] = {
+ /*
+ * Split out handlers, the default case.
+ */
+ [SCIx_ERI_IRQ] = {
+ .desc = "rx err",
+ .handler = sci_er_interrupt,
+ },
- clk_enable(sci_port->iclk);
- sci_port->port.uartclk = clk_get_rate(sci_port->iclk);
- clk_enable(sci_port->fclk);
-}
+ [SCIx_RXI_IRQ] = {
+ .desc = "rx full",
+ .handler = sci_rx_interrupt,
+ },
-static void sci_clk_disable(struct uart_port *port)
-{
- struct sci_port *sci_port = to_sci_port(port);
+ [SCIx_TXI_IRQ] = {
+ .desc = "tx empty",
+ .handler = sci_tx_interrupt,
+ },
- clk_disable(sci_port->fclk);
- clk_disable(sci_port->iclk);
+ [SCIx_BRI_IRQ] = {
+ .desc = "break",
+ .handler = sci_br_interrupt,
+ },
- pm_runtime_put_sync(port->dev);
-}
+ /*
+ * Special muxed handler.
+ */
+ [SCIx_MUX_IRQ] = {
+ .desc = "mux",
+ .handler = sci_mpxed_interrupt,
+ },
+};
static int sci_request_irq(struct sci_port *port)
{
- int i;
- irqreturn_t (*handlers[4])(int irq, void *ptr) = {
- sci_er_interrupt, sci_rx_interrupt, sci_tx_interrupt,
- sci_br_interrupt,
- };
- const char *desc[] = { "SCI Receive Error", "SCI Receive Data Full",
- "SCI Transmit Data Empty", "SCI Break" };
-
- if (port->cfg->irqs[0] == port->cfg->irqs[1]) {
- if (unlikely(!port->cfg->irqs[0]))
- return -ENODEV;
-
- if (request_irq(port->cfg->irqs[0], sci_mpxed_interrupt,
- IRQF_DISABLED, "sci", port)) {
- dev_err(port->port.dev, "Can't allocate IRQ\n");
- return -ENODEV;
+ struct uart_port *up = &port->port;
+ int i, j, ret = 0;
+
+ for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) {
+ struct sci_irq_desc *desc;
+ unsigned int irq;
+
+ if (SCIx_IRQ_IS_MUXED(port)) {
+ i = SCIx_MUX_IRQ;
+ irq = up->irq;
+ } else
+ irq = port->cfg->irqs[i];
+
+ desc = sci_irq_desc + i;
+ port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s",
+ dev_name(up->dev), desc->desc);
+ if (!port->irqstr[j]) {
+ dev_err(up->dev, "Failed to allocate %s IRQ string\n",
+ desc->desc);
+ goto out_nomem;
}
- } else {
- for (i = 0; i < ARRAY_SIZE(handlers); i++) {
- if (unlikely(!port->cfg->irqs[i]))
- continue;
-
- if (request_irq(port->cfg->irqs[i], handlers[i],
- IRQF_DISABLED, desc[i], port)) {
- dev_err(port->port.dev, "Can't allocate IRQ\n");
- return -ENODEV;
- }
+
+ ret = request_irq(irq, desc->handler, up->irqflags,
+ port->irqstr[j], port);
+ if (unlikely(ret)) {
+ dev_err(up->dev, "Can't allocate %s IRQ\n", desc->desc);
+ goto out_noirq;
}
}
return 0;
+
+out_noirq:
+ while (--i >= 0)
+ free_irq(port->cfg->irqs[i], port);
+
+out_nomem:
+ while (--j >= 0)
+ kfree(port->irqstr[j]);
+
+ return ret;
}
static void sci_free_irq(struct sci_port *port)
{
int i;
- if (port->cfg->irqs[0] == port->cfg->irqs[1])
- free_irq(port->cfg->irqs[0], port);
- else {
- for (i = 0; i < ARRAY_SIZE(port->cfg->irqs); i++) {
- if (!port->cfg->irqs[i])
- continue;
+ /*
+ * Intentionally in reverse order so we iterate over the muxed
+ * IRQ first.
+ */
+ for (i = 0; i < SCIx_NR_IRQS; i++) {
+ free_irq(port->cfg->irqs[i], port);
+ kfree(port->irqstr[i]);
- free_irq(port->cfg->irqs[i], port);
+ if (SCIx_IRQ_IS_MUXED(port)) {
+ /* If there's only one IRQ, we're done. */
+ return;
}
}
}
static unsigned int sci_tx_empty(struct uart_port *port)
{
unsigned short status = sci_in(port, SCxSR);
- unsigned short in_tx_fifo = scif_txfill(port);
+ unsigned short in_tx_fifo = sci_txfill(port);
return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0;
}
dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
- if (s->enable)
- s->enable(port);
+ sci_port_enable(s);
ret = sci_request_irq(s);
if (unlikely(ret < 0))
sci_free_dma(port);
sci_free_irq(s);
- if (s->disable)
- s->disable(port);
+ sci_port_disable(s);
}
static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps,
if (likely(baud && port->uartclk))
t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud, port->uartclk);
- if (s->enable)
- s->enable(port);
+ sci_port_enable(s);
do {
status = sci_in(port, SCxSR);
if ((termios->c_cflag & CREAD) != 0)
sci_start_rx(port);
- if (s->disable)
- s->disable(port);
+ sci_port_disable(s);
}
static const char *sci_type(struct uart_port *port)
struct plat_sci_port *p)
{
struct uart_port *port = &sci_port->port;
+ int ret;
port->ops = &sci_uart_ops;
port->iotype = UPIO_MEM;
break;
}
+ if (p->regtype == SCIx_PROBE_REGTYPE) {
+ ret = sci_probe_regmap(p);
+ if (unlikely(!ret))
+ return ret;
+ }
+
if (dev) {
sci_port->iclk = clk_get(&dev->dev, "sci_ick");
if (IS_ERR(sci_port->iclk)) {
if (IS_ERR(sci_port->fclk))
sci_port->fclk = NULL;
- sci_port->enable = sci_clk_enable;
- sci_port->disable = sci_clk_disable;
port->dev = &dev->dev;
pm_runtime_enable(&dev->dev);
sci_port->break_timer.function = sci_break_timer;
init_timer(&sci_port->break_timer);
+ /*
+ * Establish some sensible defaults for the error detection.
+ */
+ if (!p->error_mask)
+ p->error_mask = (p->type == PORT_SCI) ?
+ SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK;
+
+ /*
+ * Establish sensible defaults for the overrun detection, unless
+ * the part has explicitly disabled support for it.
+ */
+ if (p->overrun_bit != SCIx_NOT_SUPPORTED) {
+ if (p->type == PORT_SCI)
+ p->overrun_bit = 5;
+ else if (p->scbrr_algo_id == SCBRR_ALGO_4)
+ p->overrun_bit = 9;
+ else
+ p->overrun_bit = 0;
+
+ /*
+ * Make the error mask inclusive of overrun detection, if
+ * supported.
+ */
+ p->error_mask |= (1 << p->overrun_bit);
+ }
+
sci_port->cfg = p;
port->mapbase = p->mapbase;
port->type = p->type;
port->flags = p->flags;
+ port->regshift = p->regshift;
/*
- * The UART port needs an IRQ value, so we peg this to the TX IRQ
+ * The UART port needs an IRQ value, so we peg this to the RX IRQ
* for the multi-IRQ ports, which is where we are primarily
* concerned with the shutdown path synchronization.
*
* For the muxed case there's nothing more to do.
*/
port->irq = p->irqs[SCIx_RXI_IRQ];
+ port->irqflags = IRQF_DISABLED;
+
+ port->serial_in = sci_serial_in;
+ port->serial_out = sci_serial_out;
if (p->dma_dev)
dev_dbg(port->dev, "DMA device %p, tx %d, rx %d\n",
struct uart_port *port = &sci_port->port;
unsigned short bits;
- if (sci_port->enable)
- sci_port->enable(port);
+ sci_port_enable(sci_port);
uart_console_write(port, s, count, serial_console_putchar);
while ((sci_in(port, SCxSR) & bits) != bits)
cpu_relax();
- if (sci_port->disable)
- sci_port->disable(port);
+ sci_port_disable(sci_port);
}
static int __devinit serial_console_setup(struct console *co, char *options)
if (unlikely(ret != 0))
return ret;
- if (sci_port->enable)
- sci_port->enable(port);
+ sci_port_enable(sci_port);
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
- ret = uart_set_options(port, co, baud, parity, bits, flow);
-#if defined(__H8300H__) || defined(__H8300S__)
- /* disable rx interrupt */
- if (ret == 0)
- sci_stop_rx(port);
-#endif
/* TODO: disable clock */
- return ret;
+ return uart_set_options(port, co, baud, parity, bits, flow);
}
static struct console serial_console = {
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:sh-sci");
+MODULE_AUTHOR("Paul Mundt");
+MODULE_DESCRIPTION("SuperH SCI(F) serial driver");
git.openpandora.org / pandora-kernel.git / blobdiff