#endif
}
+static int
+pci_xr17c154_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ port->flags |= UPF_EXAR_EFR;
+ return pci_default_setup(priv, board, port, idx);
+}
+
/* This should be in linux/pci_ids.h */
#define PCI_VENDOR_ID_SBSMODULARIO 0x124B
#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
.subdevice = PCI_ANY_ID,
.setup = pci_timedia_setup,
},
+ /*
+ * Exar cards
+ */
+ {
+ .vendor = PCI_VENDOR_ID_EXAR,
+ .device = PCI_DEVICE_ID_EXAR_XR17C152,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_xr17c154_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_EXAR,
+ .device = PCI_DEVICE_ID_EXAR_XR17C154,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_xr17c154_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_EXAR,
+ .device = PCI_DEVICE_ID_EXAR_XR17C158,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_xr17c154_setup,
+ },
/*
* Xircom cards
*/
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8811,
.init = pci_eg20t_init,
+ .setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8812,
.init = pci_eg20t_init,
+ .setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8813,
.init = pci_eg20t_init,
+ .setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8814,
.init = pci_eg20t_init,
+ .setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x8027,
.init = pci_eg20t_init,
+ .setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x8028,
.init = pci_eg20t_init,
+ .setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x8029,
.init = pci_eg20t_init,
+ .setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x800C,
.init = pci_eg20t_init,
+ .setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x800D,
.init = pci_eg20t_init,
+ .setup = pci_default_setup,
},
/*
* Cronyx Omega PCI (PLX-chip based)