/*
- tm6000-cards.c - driver for TM5600/TM6000 USB video capture devices
+ tm6000-cards.c - driver for TM5600/TM6000/TM6010 USB video capture devices
Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
#include <linux/version.h>
#include <media/v4l2-common.h>
#include <media/tuner.h>
+#include <media/tvaudio.h>
+#include <media/i2c-addr.h>
#include "tm6000.h"
#include "tm6000-regs.h"
#include "tuner-xc2028.h"
+#include "xc5000.h"
#define TM6000_BOARD_UNKNOWN 0
#define TM5600_BOARD_GENERIC 1
#define TM6000_BOARD_GENERIC 2
-#define TM5600_BOARD_10MOONS_UT821 3
-#define TM5600_BOARD_10MOONS_UT330 4
-#define TM6000_BOARD_ADSTECH_DUAL_TV 5
-#define TM6000_BOARD_FREECOM_AND_SIMILAR 6
-#define TM6000_BOARD_ADSTECH_MINI_DUAL_TV 7
+#define TM6010_BOARD_GENERIC 3
+#define TM5600_BOARD_10MOONS_UT821 4
+#define TM5600_BOARD_10MOONS_UT330 5
+#define TM6000_BOARD_ADSTECH_DUAL_TV 6
+#define TM6000_BOARD_FREECOM_AND_SIMILAR 7
+#define TM6000_BOARD_ADSTECH_MINI_DUAL_TV 8
+#define TM6010_BOARD_HAUPPAUGE_900H 9
+#define TM6010_BOARD_BEHOLD_WANDER 10
+#define TM6010_BOARD_BEHOLD_VOYAGER 11
+#define TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE 12
+#define TM6010_BOARD_TWINHAN_TU501 13
#define TM6000_MAXBOARDS 16
static unsigned int card[] = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET };
struct tm6000_capabilities caps;
+ enum tm6000_devtype type; /* variant of the chipset */
int tuner_type; /* type of the tuner */
int tuner_addr; /* tuner address */
int demod_addr; /* demodulator address */
- int gpio_addr_tun_reset; /* GPIO used for tuner reset */
+
+ struct tm6000_gpio gpio;
};
struct tm6000_board tm6000_boards[] = {
.caps = {
.has_tuner = 1,
},
- .gpio_addr_tun_reset = TM6000_GPIO_1,
+ .gpio = {
+ .tuner_reset = TM6000_GPIO_1,
+ },
},
[TM5600_BOARD_GENERIC] = {
.name = "Generic tm5600 board",
+ .type = TM5600,
.tuner_type = TUNER_XC2028,
- .tuner_addr = 0xc2,
+ .tuner_addr = 0xc2 >> 1,
.caps = {
.has_tuner = 1,
},
- .gpio_addr_tun_reset = TM6000_GPIO_1,
+ .gpio = {
+ .tuner_reset = TM6000_GPIO_1,
+ },
},
[TM6000_BOARD_GENERIC] = {
.name = "Generic tm6000 board",
.tuner_type = TUNER_XC2028,
- .tuner_addr = 0xc2,
+ .tuner_addr = 0xc2 >> 1,
.caps = {
.has_tuner = 1,
.has_dvb = 1,
},
- .gpio_addr_tun_reset = TM6000_GPIO_1,
+ .gpio = {
+ .tuner_reset = TM6000_GPIO_1,
+ },
+ },
+ [TM6010_BOARD_GENERIC] = {
+ .name = "Generic tm6010 board",
+ .type = TM6010,
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ .has_remote = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_2,
+ .tuner_on = TM6010_GPIO_3,
+ .demod_reset = TM6010_GPIO_1,
+ .demod_on = TM6010_GPIO_4,
+ .power_led = TM6010_GPIO_7,
+ .dvb_led = TM6010_GPIO_5,
+ .ir = TM6010_GPIO_0,
+ },
},
[TM5600_BOARD_10MOONS_UT821] = {
.name = "10Moons UT 821",
.tuner_type = TUNER_XC2028,
- .tuner_addr = 0xc2,
+ .type = TM5600,
+ .tuner_addr = 0xc2 >> 1,
.caps = {
.has_tuner = 1,
.has_eeprom = 1,
},
- .gpio_addr_tun_reset = TM6000_GPIO_1,
+ .gpio = {
+ .tuner_reset = TM6000_GPIO_1,
+ },
},
[TM5600_BOARD_10MOONS_UT330] = {
.name = "10Moons UT 330",
.tuner_type = TUNER_PHILIPS_FQ1216AME_MK4,
- .tuner_addr = 0xc8,
+ .tuner_addr = 0xc8 >> 1,
.caps = {
.has_tuner = 1,
.has_dvb = 0,
[TM6000_BOARD_ADSTECH_DUAL_TV] = {
.name = "ADSTECH Dual TV USB",
.tuner_type = TUNER_XC2028,
- .tuner_addr = 0xc8,
+ .tuner_addr = 0xc8 >> 1,
.caps = {
.has_tuner = 1,
.has_tda9874 = 1,
[TM6000_BOARD_FREECOM_AND_SIMILAR] = {
.name = "Freecom Hybrid Stick / Moka DVB-T Receiver Dual",
.tuner_type = TUNER_XC2028, /* has a XC3028 */
- .tuner_addr = 0xc2,
- .demod_addr = 0x1e,
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
.caps = {
.has_tuner = 1,
.has_dvb = 1,
.has_eeprom = 0,
.has_remote = 1,
},
- .gpio_addr_tun_reset = TM6000_GPIO_4,
+ .gpio = {
+ .tuner_reset = TM6000_GPIO_4,
+ },
},
[TM6000_BOARD_ADSTECH_MINI_DUAL_TV] = {
.name = "ADSTECH Mini Dual TV USB",
.tuner_type = TUNER_XC2028, /* has a XC3028 */
- .tuner_addr = 0xc8,
- .demod_addr = 0x1e,
+ .tuner_addr = 0xc8 >> 1,
+ .demod_addr = 0x1e >> 1,
.caps = {
.has_tuner = 1,
.has_dvb = 1,
.has_zl10353 = 1,
.has_eeprom = 0,
},
- .gpio_addr_tun_reset = TM6000_GPIO_4,
+ .gpio = {
+ .tuner_reset = TM6000_GPIO_4,
+ },
+ },
+ [TM6010_BOARD_HAUPPAUGE_900H] = {
+ .name = "Hauppauge WinTV HVR-900H / WinTV USB2-Stick",
+ .tuner_type = TUNER_XC2028, /* has a XC3028 */
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .type = TM6010,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ .has_remote = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_2,
+ .tuner_on = TM6010_GPIO_3,
+ .demod_reset = TM6010_GPIO_1,
+ .demod_on = TM6010_GPIO_4,
+ .power_led = TM6010_GPIO_7,
+ .dvb_led = TM6010_GPIO_5,
+ .ir = TM6010_GPIO_0,
+ },
+ },
+ [TM6010_BOARD_BEHOLD_WANDER] = {
+ .name = "Beholder Wander DVB-T/TV/FM USB2.0",
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .type = TM6010,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ .has_remote = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_0,
+ .demod_reset = TM6010_GPIO_1,
+ .power_led = TM6010_GPIO_6,
+ },
+ },
+ [TM6010_BOARD_BEHOLD_VOYAGER] = {
+ .name = "Beholder Voyager TV/FM USB2.0",
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0xc2 >> 1,
+ .type = TM6010,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 0,
+ .has_zl10353 = 0,
+ .has_eeprom = 1,
+ .has_remote = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_0,
+ .power_led = TM6010_GPIO_6,
+ },
+ },
+ [TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = {
+ .name = "Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick",
+ .tuner_type = TUNER_XC2028, /* has a XC3028 */
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .type = TM6010,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ .has_remote = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_2,
+ .tuner_on = TM6010_GPIO_3,
+ .demod_reset = TM6010_GPIO_1,
+ .demod_on = TM6010_GPIO_4,
+ .power_led = TM6010_GPIO_7,
+ .dvb_led = TM6010_GPIO_5,
+ .ir = TM6010_GPIO_0,
+ },
},
+ [TM6010_BOARD_TWINHAN_TU501] = {
+ .name = "Twinhan TU501(704D1)",
+ .tuner_type = TUNER_XC2028, /* has a XC3028 */
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .type = TM6010,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ .has_remote = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_2,
+ .tuner_on = TM6010_GPIO_3,
+ .demod_reset = TM6010_GPIO_1,
+ .demod_on = TM6010_GPIO_4,
+ .power_led = TM6010_GPIO_7,
+ .dvb_led = TM6010_GPIO_5,
+ .ir = TM6010_GPIO_0,
+ },
+ }
};
/* table of devices that work with this driver */
-struct usb_device_id tm6000_id_table [] = {
+struct usb_device_id tm6000_id_table[] = {
{ USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_10MOONS_UT821 },
+ { USB_DEVICE(0x6000, 0x0002), .driver_info = TM6010_BOARD_GENERIC },
{ USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV },
{ USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR },
{ USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV },
+ { USB_DEVICE(0x2040, 0x6600), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+ { USB_DEVICE(0x2040, 0x6601), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+ { USB_DEVICE(0x2040, 0x6610), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+ { USB_DEVICE(0x2040, 0x6611), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+ { USB_DEVICE(0x6000, 0xdec0), .driver_info = TM6010_BOARD_BEHOLD_WANDER },
+ { USB_DEVICE(0x6000, 0xdec1), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER },
+ { USB_DEVICE(0x0ccd, 0x0086), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
+ { USB_DEVICE(0x0ccd, 0x00A5), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
+ { USB_DEVICE(0x13d3, 0x3240), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+ { USB_DEVICE(0x13d3, 0x3241), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+ { USB_DEVICE(0x13d3, 0x3243), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+ { USB_DEVICE(0x13d3, 0x3264), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
{ },
};
-static void tm6000_config_tuner (struct tm6000_core *dev)
+/* Tuner callback to provide the proper gpio changes needed for xc5000 */
+int tm6000_xc5000_callback(void *ptr, int component, int command, int arg)
+{
+ int rc = 0;
+ struct tm6000_core *dev = ptr;
+
+ if (dev->tuner_type != TUNER_XC5000)
+ return 0;
+
+ switch (command) {
+ case XC5000_TUNER_RESET:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x00);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ break;
+ }
+ return (rc);
+}
+
+
+/* Tuner callback to provide the proper gpio changes needed for xc2028 */
+
+int tm6000_tuner_callback(void *ptr, int component, int command, int arg)
+{
+ int rc = 0;
+ struct tm6000_core *dev = ptr;
+
+ if (dev->tuner_type != TUNER_XC2028)
+ return 0;
+
+ switch (command) {
+ case XC2028_RESET_CLK:
+ tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
+ 0x02, arg);
+ msleep(10);
+ rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6000_GPIO_CLK, 0);
+ if (rc < 0)
+ return rc;
+ msleep(10);
+ rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6000_GPIO_CLK, 1);
+ break;
+ case XC2028_TUNER_RESET:
+ /* Reset codes during load firmware */
+ switch (arg) {
+ case 0:
+ /* newer tuner can faster reset */
+ switch (dev->model) {
+ case TM5600_BOARD_10MOONS_UT821:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ 0x300, 0x01);
+ msleep(10);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x00);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ 0x300, 0x00);
+ msleep(10);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ 0x300, 0x01);
+ break;
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ msleep(60);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x00);
+ msleep(75);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ msleep(60);
+ break;
+ default:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x00);
+ msleep(130);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ msleep(130);
+ break;
+ }
+ break;
+ case 1:
+ tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
+ 0x02, 0x01);
+ msleep(10);
+ break;
+
+ case 2:
+ rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6000_GPIO_CLK, 0);
+ if (rc < 0)
+ return rc;
+ msleep(100);
+ rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6000_GPIO_CLK, 1);
+ msleep(100);
+ break;
+ }
+ }
+ return rc;
+}
+
+int tm6000_cards_setup(struct tm6000_core *dev)
+{
+ int i, rc;
+
+ /*
+ * Board-specific initialization sequence. Handles all GPIO
+ * initialization sequences that are board-specific.
+ * Up to now, all found devices use GPIO1 and GPIO4 at the same way.
+ * Probably, they're all based on some reference device. Due to that,
+ * there's a common routine at the end to handle those GPIO's. Devices
+ * that use different pinups or init sequences can just return at
+ * the board-specific session.
+ */
+ switch (dev->model) {
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ case TM6010_BOARD_GENERIC:
+ /* Turn xceive 3028 on */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_on, 0x01);
+ msleep(15);
+ /* Turn zarlink zl10353 on */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
+ msleep(15);
+ /* Reset zarlink zl10353 */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
+ msleep(50);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
+ msleep(15);
+ /* Turn zarlink zl10353 off */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x01);
+ msleep(15);
+ /* ir ? */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.ir, 0x01);
+ msleep(15);
+ /* Power led on (blue) */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00);
+ msleep(15);
+ /* DVB led off (orange) */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.dvb_led, 0x01);
+ msleep(15);
+ /* Turn zarlink zl10353 on */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
+ msleep(15);
+ break;
+ case TM6010_BOARD_BEHOLD_WANDER:
+ /* Power led on (blue) */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
+ msleep(15);
+ /* Reset zarlink zl10353 */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
+ msleep(50);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
+ msleep(15);
+ break;
+ case TM6010_BOARD_BEHOLD_VOYAGER:
+ /* Power led on (blue) */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
+ msleep(15);
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * Default initialization. Most of the devices seem to use GPIO1
+ * and GPIO4.on the same way, so, this handles the common sequence
+ * used by most devices.
+ * If a device uses a different sequence or different GPIO pins for
+ * reset, just add the code at the board-specific part
+ */
+
+ if (dev->gpio.tuner_reset) {
+ for (i = 0; i < 2; i++) {
+ rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x00);
+ if (rc < 0) {
+ printk(KERN_ERR "Error %i doing tuner reset\n", rc);
+ return rc;
+ }
+
+ msleep(10); /* Just to be conservative */
+ rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ if (rc < 0) {
+ printk(KERN_ERR "Error %i doing tuner reset\n", rc);
+ return rc;
+ }
+ msleep(10);
+
+ if (!i) {
+ rc = tm6000_get_reg32(dev, REQ_40_GET_VERSION, 0, 0);
+ if (rc >= 0)
+ printk(KERN_DEBUG "board=0x%08x\n", rc);
+ }
+ }
+ } else {
+ printk(KERN_ERR "Tuner reset is not configured\n");
+ return -1;
+ }
+
+ msleep(50);
+
+ return 0;
+};
+
+static void tm6000_config_tuner(struct tm6000_core *dev)
{
- struct v4l2_priv_tun_config xc2028_cfg;
- struct xc2028_ctrl ctl;
+ struct tuner_setup tun_setup;
- memset (&ctl,0,sizeof(ctl));
+ /* Load tuner module */
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "tuner", "tuner", dev->tuner_addr, NULL);
- ctl.fname = "tm6000-xc3028.fw";
- ctl.type = XC2028_FIRM_MTS;
+ memset(&tun_setup, 0, sizeof(tun_setup));
+ tun_setup.type = dev->tuner_type;
+ tun_setup.addr = dev->tuner_addr;
- xc2028_cfg.tuner = TUNER_XC2028;
- xc2028_cfg.priv = &ctl;
+ tun_setup.mode_mask = 0;
+ if (dev->caps.has_tuner)
+ tun_setup.mode_mask |= (T_ANALOG_TV | T_RADIO);
+ if (dev->caps.has_dvb)
+ tun_setup.mode_mask |= T_DIGITAL_TV;
-printk("Setting firmware parameters for tm6000\n");
+ switch (dev->tuner_type) {
+ case TUNER_XC2028:
+ tun_setup.tuner_callback = tm6000_tuner_callback;;
+ break;
+ case TUNER_XC5000:
+ tun_setup.tuner_callback = tm6000_xc5000_callback;
+ break;
+ }
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
+
+ switch (dev->tuner_type) {
+ case TUNER_XC2028: {
+ struct v4l2_priv_tun_config xc2028_cfg;
+ struct xc2028_ctrl ctl;
+
+ memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
+ memset(&ctl, 0, sizeof(ctl));
+
+ ctl.input1 = 1;
+ ctl.read_not_reliable = 0;
+ ctl.msleep = 10;
+ ctl.demod = XC3028_FE_ZARLINK456;
+ ctl.vhfbw7 = 1;
+ ctl.uhfbw8 = 1;
+ xc2028_cfg.tuner = TUNER_XC2028;
+ xc2028_cfg.priv = &ctl;
+
+ switch (dev->model) {
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ ctl.fname = "xc3028L-v36.fw";
+ break;
+ default:
+ if (dev->dev_type == TM6010)
+ ctl.fname = "xc3028-v27.fw";
+ else
+ ctl.fname = "xc3028-v24.fw";
+ }
+
+ printk(KERN_INFO "Setting firmware parameters for xc2028\n");
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
+ &xc2028_cfg);
+
+ }
+ break;
+ case TUNER_XC5000:
+ {
+ struct v4l2_priv_tun_config xc5000_cfg;
+ struct xc5000_config ctl = {
+ .i2c_address = dev->tuner_addr,
+ .if_khz = 4570,
+ .radio_input = XC5000_RADIO_FM1,
+ };
- tm6000_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
+ xc5000_cfg.tuner = TUNER_XC5000;
+ xc5000_cfg.priv = &ctl;
+
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
+ &xc5000_cfg);
+ }
+ break;
+ default:
+ printk(KERN_INFO "Unknown tuner type. Tuner is not configured.\n");
+ break;
+ }
}
static int tm6000_init_dev(struct tm6000_core *dev)
mutex_lock(&dev->lock);
/* Initializa board-specific data */
+ dev->dev_type = tm6000_boards[dev->model].type;
dev->tuner_type = tm6000_boards[dev->model].tuner_type;
dev->tuner_addr = tm6000_boards[dev->model].tuner_addr;
- dev->tuner_reset_gpio = tm6000_boards[dev->model].gpio_addr_tun_reset;
+
+ dev->gpio = tm6000_boards[dev->model].gpio;
dev->demod_addr = tm6000_boards[dev->model].demod_addr;
dev->caps = tm6000_boards[dev->model].caps;
/* initialize hardware */
- rc=tm6000_init (dev);
- if (rc<0)
+ rc = tm6000_init(dev);
+ if (rc < 0)
goto err;
- /* register i2c bus */
- rc=tm6000_i2c_register(dev);
- if (rc<0)
+ rc = v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev);
+ if (rc < 0)
goto err;
- /* register and initialize V4L2 */
- rc=tm6000_v4l2_register(dev);
- if (rc<0)
+ /* register i2c bus */
+ rc = tm6000_i2c_register(dev);
+ if (rc < 0)
goto err;
- /* Request tuner */
- request_module ("tuner");
+ /* Default values for STD and resolutions */
+ dev->width = 720;
+ dev->height = 480;
+ dev->norm = V4L2_STD_PAL_M;
- tm6000_config_tuner (dev);
+ /* Configure tuner */
+ tm6000_config_tuner(dev);
-// norm=V4L2_STD_NTSC_M;
- dev->norm=V4L2_STD_PAL_M;
- tm6000_i2c_call_clients(dev, VIDIOC_S_STD, &dev->norm);
+ /* Set video standard */
+ v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm);
- /* configure tuner */
+ /* Set tuner frequency - also loads firmware on xc2028/xc3028 */
f.tuner = 0;
f.type = V4L2_TUNER_ANALOG_TV;
f.frequency = 3092; /* 193.25 MHz */
dev->freq = f.frequency;
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
- tm6000_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, &f);
- if(dev->caps.has_dvb) {
+ if (dev->caps.has_tda9874)
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "tvaudio", "tvaudio", I2C_ADDR_TDA9874, NULL);
+
+ /* register and initialize V4L2 */
+ rc = tm6000_v4l2_register(dev);
+ if (rc < 0)
+ goto err;
+
+ if (dev->caps.has_dvb) {
dev->dvb = kzalloc(sizeof(*(dev->dvb)), GFP_KERNEL);
- if(!dev->dvb) {
+ if (!dev->dvb) {
rc = -ENOMEM;
- goto err;
+ goto err2;
}
+
#ifdef CONFIG_VIDEO_TM6000_DVB
rc = tm6000_dvb_register(dev);
- if(rc < 0) {
+ if (rc < 0) {
kfree(dev->dvb);
dev->dvb = NULL;
- goto err;
+ goto err2;
}
#endif
}
+ mutex_unlock(&dev->lock);
+ return 0;
+
+err2:
+ v4l2_device_unregister(&dev->v4l2_dev);
+
err:
mutex_unlock(&dev->lock);
return rc;
/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
-static void get_max_endpoint ( struct usb_device *usbdev,
- char *msgtype,
- struct usb_host_endpoint *curr_e,
- unsigned int *maxsize,
- struct usb_host_endpoint **ep )
+static void get_max_endpoint(struct usb_device *udev,
+ struct usb_host_interface *alt,
+ char *msgtype,
+ struct usb_host_endpoint *curr_e,
+ struct tm6000_endpoint *tm_ep)
{
u16 tmp = le16_to_cpu(curr_e->desc.wMaxPacketSize);
unsigned int size = tmp & 0x7ff;
- if (usbdev->speed == USB_SPEED_HIGH)
+ if (udev->speed == USB_SPEED_HIGH)
size = size * hb_mult (tmp);
- if (size>*maxsize) {
- *ep = curr_e;
- *maxsize = size;
- printk("tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n",
+ if (size > tm_ep->maxsize) {
+ tm_ep->endp = curr_e;
+ tm_ep->maxsize = size;
+ tm_ep->bInterfaceNumber = alt->desc.bInterfaceNumber;
+ tm_ep->bAlternateSetting = alt->desc.bAlternateSetting;
+
+ printk(KERN_INFO "tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n",
msgtype, curr_e->desc.bEndpointAddress,
size);
}
{
struct usb_device *usbdev;
struct tm6000_core *dev = NULL;
- int i,rc=0;
- int nr=0;
+ int i, rc = 0;
+ int nr = 0;
char *speed;
-
- usbdev=usb_get_dev(interface_to_usbdev(interface));
+ usbdev = usb_get_dev(interface_to_usbdev(interface));
/* Selects the proper interface */
- rc=usb_set_interface(usbdev,0,1);
- if (rc<0)
+ rc = usb_set_interface(usbdev, 0, 1);
+ if (rc < 0)
goto err;
/* Check to see next free device and mark as used */
- nr=find_first_zero_bit(&tm6000_devused,TM6000_MAXBOARDS);
+ nr = find_first_zero_bit(&tm6000_devused, TM6000_MAXBOARDS);
if (nr >= TM6000_MAXBOARDS) {
- printk ("tm6000: Supports only %i em28xx boards.\n",TM6000_MAXBOARDS);
+ printk(KERN_ERR "tm6000: Supports only %i tm60xx boards.\n", TM6000_MAXBOARDS);
usb_put_dev(usbdev);
return -ENOMEM;
}
/* Create and initialize dev struct */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
- printk ("tm6000" ": out of memory!\n");
+ printk(KERN_ERR "tm6000" ": out of memory!\n");
usb_put_dev(usbdev);
return -ENOMEM;
}
spin_lock_init(&dev->slock);
/* Increment usage count */
- tm6000_devused|=1<<nr;
+ tm6000_devused |= 1<<nr;
snprintf(dev->name, 29, "tm6000 #%d", nr);
- dev->model=id->driver_info;
- if ((card[nr]>=0) && (card[nr]<ARRAY_SIZE(tm6000_boards))) {
- dev->model=card[nr];
- }
+ dev->model = id->driver_info;
+ if ((card[nr] >= 0) && (card[nr] < ARRAY_SIZE(tm6000_boards)))
+ dev->model = card[nr];
- INIT_LIST_HEAD(&dev->tm6000_corelist);
- dev->udev= usbdev;
- dev->devno=nr;
+ dev->udev = usbdev;
+ dev->devno = nr;
switch (usbdev->speed) {
case USB_SPEED_LOW:
dir_out = ((e->desc.bEndpointAddress &
USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
- printk("tm6000: alt %d, interface %i, class %i\n",
+ printk(KERN_INFO "tm6000: alt %d, interface %i, class %i\n",
i,
interface->altsetting[i].desc.bInterfaceNumber,
interface->altsetting[i].desc.bInterfaceClass);
switch (e->desc.bmAttributes) {
case USB_ENDPOINT_XFER_BULK:
if (!dir_out) {
- get_max_endpoint (usbdev, "Bulk IN", e,
- &dev->max_bulk_in,
- &dev->bulk_in);
+ get_max_endpoint(usbdev,
+ &interface->altsetting[i],
+ "Bulk IN", e,
+ &dev->bulk_in);
} else {
- get_max_endpoint (usbdev, "Bulk OUT", e,
- &dev->max_bulk_out,
- &dev->bulk_out);
+ get_max_endpoint(usbdev,
+ &interface->altsetting[i],
+ "Bulk OUT", e,
+ &dev->bulk_out);
}
break;
case USB_ENDPOINT_XFER_ISOC:
if (!dir_out) {
- get_max_endpoint (usbdev, "ISOC IN", e,
- &dev->max_isoc_in,
- &dev->isoc_in);
+ get_max_endpoint(usbdev,
+ &interface->altsetting[i],
+ "ISOC IN", e,
+ &dev->isoc_in);
} else {
- get_max_endpoint (usbdev, "ISOC OUT", e,
- &dev->max_isoc_out,
- &dev->isoc_out);
+ get_max_endpoint(usbdev,
+ &interface->altsetting[i],
+ "ISOC OUT", e,
+ &dev->isoc_out);
}
break;
}
}
}
- if (interface->altsetting->desc.bAlternateSetting) {
- printk("selecting alt setting %d\n",
- interface->altsetting->desc.bAlternateSetting);
- rc = usb_set_interface (usbdev,
- interface->altsetting->desc.bInterfaceNumber,
- interface->altsetting->desc.bAlternateSetting);
- if (rc<0)
- goto err;
- }
- printk("tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n",
+ printk(KERN_INFO "tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n",
speed,
le16_to_cpu(dev->udev->descriptor.idVendor),
le16_to_cpu(dev->udev->descriptor.idProduct),
interface->altsetting->desc.bInterfaceNumber);
/* check if the the device has the iso in endpoint at the correct place */
- if (!dev->isoc_in) {
- printk("tm6000: probing error: no IN ISOC endpoint!\n");
- rc= -ENODEV;
+ if (!dev->isoc_in.endp) {
+ printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
+ rc = -ENODEV;
goto err;
}
/* save our data pointer in this interface device */
usb_set_intfdata(interface, dev);
- printk("tm6000: Found %s\n", tm6000_boards[dev->model].name);
+ printk(KERN_INFO "tm6000: Found %s\n", tm6000_boards[dev->model].name);
- rc=tm6000_init_dev(dev);
+ rc = tm6000_init_dev(dev);
- if (rc<0)
+ if (rc < 0)
goto err;
return 0;
err:
- tm6000_devused&=~(1<<nr);
+ printk(KERN_ERR "tm6000: Error %d while registering\n", rc);
+
+ tm6000_devused &= ~(1<<nr);
usb_put_dev(usbdev);
kfree(dev);
if (!dev)
return;
- printk("tm6000: disconnecting %s\n", dev->name);
+ printk(KERN_INFO "tm6000: disconnecting %s\n", dev->name);
mutex_lock(&dev->lock);
#ifdef CONFIG_VIDEO_TM6000_DVB
- if(dev->dvb) {
+ if (dev->dvb) {
tm6000_dvb_unregister(dev);
kfree(dev->dvb);
}
tm6000_i2c_unregister(dev);
-// wake_up_interruptible_all(&dev->open);
+ v4l2_device_unregister(&dev->v4l2_dev);
dev->state |= DEV_DISCONNECTED;
/* register this driver with the USB subsystem */
result = usb_register(&tm6000_usb_driver);
if (result)
- printk("tm6000"
+ printk(KERN_ERR "tm6000"
" usb_register failed. Error number %d.\n", result);
return result;
module_init(tm6000_module_init);
module_exit(tm6000_module_exit);
-MODULE_DESCRIPTION("Trident TVMaster TM5600/TM6000 USB2 adapter");
+MODULE_DESCRIPTION("Trident TVMaster TM5600/TM6000/TM6010 USB2 adapter");
MODULE_AUTHOR("Mauro Carvalho Chehab");
MODULE_LICENSE("GPL");
git.openpandora.org / pandora-kernel.git / blobdiff