pAd->bLedOnScanning = FALSE;
RTMPSetLED(pAd, pAd->LedStatus);
}
-#ifdef DOT11N_DRAFT3
- // AP sent a 2040Coexistence mgmt frame, then station perform a scan, and then send back the respone.
- if (pAd->CommonCfg.BSSCoexist2040.field.InfoReq == 1)
- {
- Update2040CoexistFrameAndNotify(pAd, BSSID_WCID, TRUE);
- }
-#endif // DOT11N_DRAFT3 //
}
break;
DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ, sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
-#ifdef WPA_SUPPLICANT_SUPPORT
+
if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_ENABLE_WITH_WEB_UI)
-#endif // WPA_SUPPLICANT_SUPPORT //
{
// Set the AutoReconnectSsid to prevent it reconnect to old SSID
// Since calling this indicate user don't want to connect to that SSID anymore.
WpaMicFailureReportFrame(pAd, Elem);
break;
-#ifdef QOS_DLS_SUPPORT
- case RT_OID_802_11_SET_DLS_PARAM:
- CntlOidDLSSetupProc(pAd, Elem);
- break;
-#endif // QOS_DLS_SUPPORT //
-
default:
DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Illegal message in CntlIdleProc(MsgType=%ld)\n",Elem->MsgType));
break;
(pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
(pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
(pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-#ifdef LEAP_SUPPORT
- || (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
) &&
(pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
{
}
pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
+
{
union iwreq_data wrqu;
wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
}
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
}
}
else if (INFRA_ON(pAd))
// already connected to the same BSSID, go back to idle state directly
DBGPRINT(RT_DEBUG_TRACE, ("CNTL - already in this BSSID. ignore this SET_BSSID request\n"));
pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
+
{
union iwreq_data wrqu;
wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
}
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
}
else
{
IterateOnBssTab(pAd);
}
-#ifdef QOS_DLS_SUPPORT
-/*
- ==========================================================================
- Description:
-
- IRQL = DISPATCH_LEVEL
-
- ==========================================================================
-*/
-VOID CntlOidDLSSetupProc(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem)
-{
- PRT_802_11_DLS pDLS = (PRT_802_11_DLS)Elem->Msg;
- MLME_DLS_REQ_STRUCT MlmeDlsReq;
- INT i;
- USHORT reason = REASON_UNSPECIFY;
-
- DBGPRINT(RT_DEBUG_TRACE,("CNTL - (OID set %02x:%02x:%02x:%02x:%02x:%02x with Valid=%d, Status=%d, TimeOut=%d, CountDownTimer=%d)\n",
- pDLS->MacAddr[0], pDLS->MacAddr[1], pDLS->MacAddr[2], pDLS->MacAddr[3], pDLS->MacAddr[4], pDLS->MacAddr[5],
- pDLS->Valid, pDLS->Status, pDLS->TimeOut, pDLS->CountDownTimer));
-
- if (!pAd->CommonCfg.bDLSCapable)
- return;
-
- // DLS will not be supported when Adhoc mode
- if (INFRA_ON(pAd))
- {
- for (i = 0; i < MAX_NUM_OF_DLS_ENTRY; i++)
- {
- if (pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) &&
- (pDLS->TimeOut == pAd->StaCfg.DLSEntry[i].TimeOut) && MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
- {
- // 1. Same setting, just drop it
- DBGPRINT(RT_DEBUG_TRACE,("CNTL - setting unchanged\n"));
- break;
- }
- else if (!pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) &&
- MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
- {
- // 2. Disable DLS link case, just tear down DLS link
- reason = REASON_QOS_UNWANTED_MECHANISM;
- pAd->StaCfg.DLSEntry[i].Valid = FALSE;
- pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
- DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
- MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
- DBGPRINT(RT_DEBUG_TRACE,("CNTL - start tear down procedure\n"));
- break;
- }
- else if ((i < MAX_NUM_OF_DLS_ENTRY) && pDLS->Valid && !pAd->StaCfg.DLSEntry[i].Valid)
- {
- // 3. Enable case, start DLS setup procedure
- NdisMoveMemory(&pAd->StaCfg.DLSEntry[i], pDLS, sizeof(RT_802_11_DLS_UI));
-
- //Update countdown timer
- pAd->StaCfg.DLSEntry[i].CountDownTimer = pAd->StaCfg.DLSEntry[i].TimeOut;
- DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
- MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
- DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS setup case\n"));
- break;
- }
- else if ((i < MAX_NUM_OF_DLS_ENTRY) && pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid &&
- (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) && !MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
- {
- // 4. update mac case, tear down old DLS and setup new DLS
- reason = REASON_QOS_UNWANTED_MECHANISM;
- pAd->StaCfg.DLSEntry[i].Valid = FALSE;
- pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
- DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
- MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
- NdisMoveMemory(&pAd->StaCfg.DLSEntry[i], pDLS, sizeof(RT_802_11_DLS_UI));
- DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
- MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
- DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS tear down and restart case\n"));
- break;
- }
- else if (pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid &&
- MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr) && (pAd->StaCfg.DLSEntry[i].TimeOut != pDLS->TimeOut))
- {
- // 5. update timeout case, start DLS setup procedure (no tear down)
- pAd->StaCfg.DLSEntry[i].TimeOut = pDLS->TimeOut;
- //Update countdown timer
- pAd->StaCfg.DLSEntry[i].CountDownTimer = pAd->StaCfg.DLSEntry[i].TimeOut;
- DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
- MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
- DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS update timeout case\n"));
- break;
- }
- else if (pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid &&
- (pAd->StaCfg.DLSEntry[i].Status != DLS_FINISH) && MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
- {
- // 6. re-setup case, start DLS setup procedure (no tear down)
- DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
- MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
- DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS retry setup procedure\n"));
- break;
- }
- else
- {
- DBGPRINT(RT_DEBUG_WARN,("CNTL - DLS not changed in entry - %d - Valid=%d, Status=%d, TimeOut=%d\n",
- i, pAd->StaCfg.DLSEntry[i].Valid, pAd->StaCfg.DLSEntry[i].Status, pAd->StaCfg.DLSEntry[i].TimeOut));
- }
- }
- }
-}
-#endif // QOS_DLS_SUPPORT //
-
/*
==========================================================================
Description:
// 2. joined a new INFRA network, start from authentication
else
{
-#ifdef LEAP_SUPPORT
- // Add AuthMode "LEAP" for CCX 1.X
- if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
- {
- AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, CISCO_AuthModeLEAP);
- }
- else
-#endif // LEAP_SUPPORT //
{
// either Ndis802_11AuthModeShared or Ndis802_11AuthModeAutoSwitch, try shared key first
if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeShared) ||
AssocParmFill(pAd, &AssocReq, pAd->MlmeAux.Bssid, pAd->MlmeAux.CapabilityInfo,
ASSOC_TIMEOUT, pAd->StaCfg.DefaultListenCount);
-#ifdef LEAP_SUPPORT
- //
- // Cisco Leap CCKM supported Re-association.
- //
- if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE))
- {
- //if CCKM is turn on , that's mean Fast Reauthentication
- //Use CCKM Reassociation instead of normal association for Fast Roaming.
- MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_REASSOC_REQ,
- sizeof(MLME_ASSOC_REQ_STRUCT), &AssocReq);
-
- pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_REASSOC;
- }
- else
-#endif // LEAP_SUPPORT //
{
MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_ASSOC_REQ,
sizeof(MLME_ASSOC_REQ_STRUCT), &AssocReq);
// ageing-out. The previous authentication attempt must have let it remove us.
// so try Authentication again may help. For D-Link DWL-900AP+ compatibility.
DBGPRINT(RT_DEBUG_TRACE, ("CNTL - AUTH FAIL, try again...\n"));
-#ifdef LEAP_SUPPORT
- //Add AuthMode "LEAP" for CCX 1.X
- if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
- {
- AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, CISCO_AuthModeLEAP);
- }
- else
-#endif // LEAP_SUPPORT //
+
{
if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeShared) ||
(pAd->StaCfg.AuthMode == Ndis802_11AuthModeAutoSwitch))
}
else
{
-#ifdef LEAP_SUPPORT
- // Process LEAP first, since it use different control variable
- // We don't want to affect other poven operation
- if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
- {
- // LEAP Auth not success, try next BSS
- DBGPRINT(RT_DEBUG_TRACE, ("CNTL - *LEAP* AUTH FAIL, give up; try next BSS\n"));
- DBGPRINT(RT_DEBUG_TRACE, ("Total match BSSID [=%d]\n", pAd->MlmeAux.SsidBssTab.BssNr));
- pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
- pAd->MlmeAux.BssIdx++;
- IterateOnBssTab(pAd);
- }
- else
-#endif // LEAP_SUPPORT //
if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeAutoSwitch) &&
(pAd->MlmeAux.Alg == Ndis802_11AuthModeShared))
{
if (pAd->CommonCfg.bWirelessEvent)
RTMPSendWirelessEvent(pAd, IW_ASSOC_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-
-#ifdef LEAP_SUPPORT
- if (LEAP_CCKM_ON(pAd))
- {
- STA_PORT_SECURED(pAd);
- pAd->StaCfg.WpaState = SS_FINISH;
- }
-#endif // LEAP_SUPPORT //
pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Re-assocition successful on BSS #%ld\n", pAd->MlmeAux.RoamIdx));
}
// If WEP is enabled, add paiewise and shared key
-#ifdef WPA_SUPPLICANT_SUPPORT
if (((pAd->StaCfg.WpaSupplicantUP)&&
(pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)&&
(pAd->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)) ||
((pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE)&&
(pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)))
-#else
- if (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)
-#endif // WPA_SUPPLICANT_SUPPORT //
{
PUCHAR Key;
UCHAR CipherAlg;
DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !! (StaActive.bHtEnable =%d, )\n", pAd->StaActive.SupportedPhyInfo.bHtEnable));
#endif // DOT11_N_SUPPORT //
- //
- // Report Adjacent AP report.
- //
-#ifdef LEAP_SUPPORT
- CCXAdjacentAPReport(pAd);
-#endif // LEAP_SUPPORT //
-
if (pAd->CommonCfg.bAggregationCapable)
{
if ((pAd->CommonCfg.bPiggyBackCapable) && (pAd->MlmeAux.APRalinkIe & 0x00000003) == 3)
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW);
-
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
- if ((pAd->CommonCfg.BACapability.field.b2040CoexistScanSup) && (pAd->CommonCfg.Channel <= 11))
- {
- OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SCAN_2040);
- BuildEffectedChannelList(pAd);
- }
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
}
/*
{
DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN 2!!!\n"));
-#ifdef QOS_DLS_SUPPORT
- // DLS tear down frame must be sent before link down
- // send DLS-TEAR_DOWN message
- if (pAd->CommonCfg.bDLSCapable)
- {
- // tear down local dls table entry
- for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
- {
- if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
- {
- pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
- RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
- }
- }
-
- // tear down peer dls table entry
- for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
- {
- if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
- {
- pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
- RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
- }
- }
- }
-#endif // QOS_DLS_SUPPORT //
-
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON);
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
NdisMoveMemory(pAd->StaCfg.CCXAdjacentAPSsid, pAd->CommonCfg.Ssid, pAd->StaCfg.CCXAdjacentAPSsidLen);
COPY_MAC_ADDR(pAd->StaCfg.CCXAdjacentAPBssid, pAd->CommonCfg.Bssid);
}
-
-#ifdef EXT_BUILD_CHANNEL_LIST
- // Country IE of the AP will be evaluated and will be used.
- if (pAd->StaCfg.IEEE80211dClientMode != Rt802_11_D_None)
- {
- NdisMoveMemory(&pAd->CommonCfg.CountryCode[0], &pAd->StaCfg.StaOriCountryCode[0], 2);
- pAd->CommonCfg.Geography = pAd->StaCfg.StaOriGeography;
- BuildChannelListEx(pAd);
- }
-#endif // EXT_BUILD_CHANNEL_LIST //
-
}
for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++)
pAd->StaCfg.WpaState = SS_START;
// Clear Replay counter
NdisZeroMemory(pAd->StaCfg.ReplayCounter, 8);
-
-#ifdef QOS_DLS_SUPPORT
- if (pAd->CommonCfg.bDLSCapable)
- NdisZeroMemory(pAd->StaCfg.DlsReplayCounter, 8);
-#endif // QOS_DLS_SUPPORT //
}
}
// 802.1x port control
-#ifdef WPA_SUPPLICANT_SUPPORT
+
// Prevent clear PortSecured here with static WEP
// NetworkManger set security policy first then set SSID to connect AP.
if (pAd->StaCfg.WpaSupplicantUP &&
pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
}
else
-#endif // WPA_SUPPLICANT_SUPPORT //
{
pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
pAd->StaCfg.PrivacyFilter = Ndis802_11PrivFilter8021xWEP;
pAd->CommonCfg.IOTestParm.bCurrentAtheros = FALSE;
pAd->CommonCfg.IOTestParm.bNowAtherosBurstOn = FALSE;
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
- OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SCAN_2040);
- pAd->CommonCfg.BSSCoexist2040.word = 0;
- TriEventInit(pAd);
- for (i = 0; i < (pAd->ChannelListNum - 1); i++)
- {
- pAd->ChannelList[i].bEffectedChannel = FALSE;
- }
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, 0x1fff);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
// Allow go to sleep after linkdown steps.
RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
- if (pAd->StaCfg.WpaSupplicantUP) {
- union iwreq_data wrqu;
- //send disassociate event to wpa_supplicant
- memset(&wrqu, 0, sizeof(wrqu));
- wrqu.data.flags = RT_DISASSOC_EVENT_FLAG;
- wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
- }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
{
union iwreq_data wrqu;
memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
}
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
}
/*
ScanReq->ScanType = ScanType;
}
-#ifdef QOS_DLS_SUPPORT
-/*
- ==========================================================================
- Description:
-
- IRQL = DISPATCH_LEVEL
-
- ==========================================================================
-*/
-VOID DlsParmFill(
- IN PRTMP_ADAPTER pAd,
- IN OUT MLME_DLS_REQ_STRUCT *pDlsReq,
- IN PRT_802_11_DLS pDls,
- IN USHORT reason)
-{
- pDlsReq->pDLS = pDls;
- pDlsReq->Reason = reason;
-}
-#endif // QOS_DLS_SUPPORT //
-
/*
==========================================================================
Description:
ULONG TmpLen;
UCHAR HtLen, HtLen1;
-#ifdef RT_BIG_ENDIAN
- HT_CAPABILITY_IE HtCapabilityTmp;
- ADD_HT_INFO_IE addHTInfoTmp;
- USHORT b2lTmp, b2lTmp2;
-#endif
-
// add HT Capability IE
HtLen = sizeof(pAd->CommonCfg.HtCapability);
HtLen1 = sizeof(pAd->CommonCfg.AddHTInfo);
-#ifndef RT_BIG_ENDIAN
+
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
1, &HtLen1,
HtLen1, &pAd->CommonCfg.AddHTInfo,
END_OF_ARGS);
-#else
- NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, HtLen);
- *(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
- *(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
-
- NdisMoveMemory(&addHTInfoTmp, &pAd->CommonCfg.AddHTInfo, HtLen1);
- *(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
- *(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
- MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
- 1, &HtCapIe,
- 1, &HtLen,
- HtLen, &HtCapabilityTmp,
- 1, &AddHtInfoIe,
- 1, &HtLen1,
- HtLen1, &addHTInfoTmp,
- END_OF_ARGS);
-#endif
FrameLen += TmpLen;
}
#endif // DOT11_N_SUPPORT //
PID_MGMT, PID_BEACON, RATE_1, IFS_HTTXOP, FALSE, &Transmit);
}
-#ifdef RT_BIG_ENDIAN
- RTMPFrameEndianChange(pAd, pBeaconFrame, DIR_WRITE, FALSE);
- RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI);
-#endif
-
DBGPRINT(RT_DEBUG_TRACE, ("MakeIbssBeacon (len=%ld), SupRateLen=%d, ExtRateLen=%d, Channel=%d, PhyMode=%d\n",
FrameLen, SupRateLen, ExtRateLen, pAd->CommonCfg.Channel, pAd->CommonCfg.PhyMode));
return FrameLen;
git.openpandora.org / pandora-kernel.git / blobdiff