*************************************************************************
Module Name:
- sync.c
+ cmm_sync.c
Abstract:
UCHAR A_BAND_REGION_4_CHANNEL_LIST[]={149, 153, 157, 161, 165};
UCHAR A_BAND_REGION_5_CHANNEL_LIST[]={149, 153, 157, 161};
UCHAR A_BAND_REGION_6_CHANNEL_LIST[]={36, 40, 44, 48};
-UCHAR A_BAND_REGION_7_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165};
+UCHAR A_BAND_REGION_7_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165, 169, 173};
UCHAR A_BAND_REGION_8_CHANNEL_LIST[]={52, 56, 60, 64};
UCHAR A_BAND_REGION_9_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165};
UCHAR A_BAND_REGION_10_CHANNEL_LIST[]={36, 40, 44, 48, 149, 153, 157, 161, 165};
UCHAR A_BAND_REGION_11_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161};
+UCHAR A_BAND_REGION_12_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140};
+UCHAR A_BAND_REGION_13_CHANNEL_LIST[]={52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161};
+UCHAR A_BAND_REGION_14_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 136, 140, 149, 153, 157, 161, 165};
+UCHAR A_BAND_REGION_15_CHANNEL_LIST[]={149, 153, 157, 161, 165, 169, 173};
+
//BaSizeArray follows the 802.11n definition as MaxRxFactor. 2^(13+factor) bytes. When factor =0, it's about Ba buffer size =8.
UCHAR BaSizeArray[4] = {8,16,32,64};
num = sizeof(A_BAND_REGION_11_CHANNEL_LIST)/sizeof(UCHAR);
pChannelList = A_BAND_REGION_11_CHANNEL_LIST;
break;
-
+ case REGION_12_A_BAND:
+ num = sizeof(A_BAND_REGION_12_CHANNEL_LIST)/sizeof(UCHAR);
+ pChannelList = A_BAND_REGION_12_CHANNEL_LIST;
+ break;
+ case REGION_13_A_BAND:
+ num = sizeof(A_BAND_REGION_13_CHANNEL_LIST)/sizeof(UCHAR);
+ pChannelList = A_BAND_REGION_13_CHANNEL_LIST;
+ break;
+ case REGION_14_A_BAND:
+ num = sizeof(A_BAND_REGION_14_CHANNEL_LIST)/sizeof(UCHAR);
+ pChannelList = A_BAND_REGION_14_CHANNEL_LIST;
+ break;
+ case REGION_15_A_BAND:
+ num = sizeof(A_BAND_REGION_15_CHANNEL_LIST)/sizeof(UCHAR);
+ pChannelList = A_BAND_REGION_15_CHANNEL_LIST;
+ break;
default: // Error. should never happen
DBGPRINT(RT_DEBUG_WARN,("countryregion=%d not support", pAd->CommonCfg.CountryRegionForABand));
break;
PHEADER_802_11 pHdr80211;
UINT ScanTimeIn5gChannel = SHORT_CHANNEL_TIME;
+ {
if (MONITOR_ON(pAd))
return;
+ }
+
if (pAd->MlmeAux.Channel == 0)
{
}
{
+#ifdef RT2860
+ /*
+ If all peer Ad-hoc clients leave, driver would do LinkDown and LinkUp.
+ In LinkUp, CommonCfg.Ssid would copy SSID from MlmeAux.
+ To prevent SSID is zero or wrong in Beacon, need to recover MlmeAux.SSID here.
+ */
+ if (ADHOC_ON(pAd))
+ {
+ NdisZeroMemory(pAd->MlmeAux.Ssid, MAX_LEN_OF_SSID);
+ pAd->MlmeAux.SsidLen = pAd->CommonCfg.SsidLen;
+ NdisMoveMemory(pAd->MlmeAux.Ssid, pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen);
+ }
+#endif // RT2860 //
//
// To prevent data lost.
// Send an NULL data with turned PSM bit on to current associated AP before SCAN progress.
MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
}
+
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
}
-#ifdef RT2870
+#ifdef RTMP_MAC_USB
else if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) && (pAd->OpMode == OPMODE_STA))
{
pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
MlmeCntlConfirm(pAd, MT2_SCAN_CONF, MLME_FAIL_NO_RESOURCE);
}
-#endif // RT2870 //
+#endif // RTMP_MAC_USB //
else
{
{
// BBP and RF are not accessible in PS mode, we has to wake them up first
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-#ifdef RT2860
- AsicForceWakeup(pAd, FROM_TX);
-#endif
-#ifdef RT2870
AsicForceWakeup(pAd, TRUE);
-#endif
+
// leave PSM during scanning. otherwise we may lost ProbeRsp & BEACON
if (pAd->StaCfg.Psm == PWR_SAVE)
- MlmeSetPsmBit(pAd, PWR_ACTIVE);
+ RTMP_SET_PSM_BIT(pAd, PWR_ACTIVE);
}
AsicSwitchChannel(pAd, pAd->MlmeAux.Channel, TRUE);
// Chnage the channel scan time for CISCO stuff based on its IAPP announcement
if (ScanType == FAST_SCAN_ACTIVE)
RTMPSetTimer(&pAd->MlmeAux.ScanTimer, FAST_ACTIVE_SCAN_TIME);
- else if (((ScanType == SCAN_CISCO_ACTIVE) ||
- (ScanType == SCAN_CISCO_PASSIVE) ||
- (ScanType == SCAN_CISCO_CHANNEL_LOAD) ||
- (ScanType == SCAN_CISCO_NOISE)) && (pAd->OpMode == OPMODE_STA))
- {
- if (pAd->StaCfg.CCXScanTime < 25)
- RTMPSetTimer(&pAd->MlmeAux.ScanTimer, pAd->StaCfg.CCXScanTime * 2);
- else
- RTMPSetTimer(&pAd->MlmeAux.ScanTimer, pAd->StaCfg.CCXScanTime);
- }
else // must be SCAN_PASSIVE or SCAN_ACTIVE
{
if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED)
RTMPSetTimer(&pAd->MlmeAux.ScanTimer, MAX_CHANNEL_TIME);
}
- if ((ScanType == SCAN_ACTIVE) || (ScanType == FAST_SCAN_ACTIVE) ||
- (ScanType == SCAN_CISCO_ACTIVE))
+ if ((ScanType == SCAN_ACTIVE)
+ || (ScanType == FAST_SCAN_ACTIVE)
+ )
{
NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory
if (NStatus != NDIS_STATUS_SUCCESS)
git.openpandora.org / pandora-kernel.git / blobdiff