return PktLen;
}
-static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
+static int bcm_char_ioctl_reg_read_private(void __user *argp, struct bcm_mini_adapter *Adapter)
{
- struct bcm_tarang_data *pTarang = filp->private_data;
- void __user *argp = (void __user *)arg;
- struct bcm_mini_adapter *Adapter = pTarang->Adapter;
- INT Status = STATUS_FAILURE;
- int timeout = 0;
+ struct bcm_rdm_buffer sRdmBuffer = {0};
struct bcm_ioctl_buffer IoBuffer;
+ PCHAR temp_buff;
+ INT Status = STATUS_FAILURE;
+ UINT Bufflen;
+ u16 temp_value;
int bytes;
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
- "Parameters Passed to control IOCTL cmd=0x%X arg=0x%lX",
- cmd, arg);
-
- if (_IOC_TYPE(cmd) != BCM_IOCTL)
+ /* Copy Ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
- if (_IOC_DIR(cmd) & _IOC_READ)
- Status = !access_ok(VERIFY_WRITE, argp, _IOC_SIZE(cmd));
- else if (_IOC_DIR(cmd) & _IOC_WRITE)
- Status = !access_ok(VERIFY_READ, argp, _IOC_SIZE(cmd));
- else if (_IOC_NONE == (_IOC_DIR(cmd) & _IOC_NONE))
- Status = STATUS_SUCCESS;
- if (Status)
- return -EFAULT;
+ if (IoBuffer.InputLength > sizeof(sRdmBuffer))
+ return -EINVAL;
- if (Adapter->device_removed)
+ if (copy_from_user(&sRdmBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength))
return -EFAULT;
- if (false == Adapter->fw_download_done) {
- switch (cmd) {
- case IOCTL_MAC_ADDR_REQ:
- case IOCTL_LINK_REQ:
- case IOCTL_CM_REQUEST:
- case IOCTL_SS_INFO_REQ:
- case IOCTL_SEND_CONTROL_MESSAGE:
- case IOCTL_IDLE_REQ:
- case IOCTL_BCM_GPIO_SET_REQUEST:
- case IOCTL_BCM_GPIO_STATUS_REQUEST:
- return -EACCES;
- default:
- break;
- }
+ if (IoBuffer.OutputLength > USHRT_MAX ||
+ IoBuffer.OutputLength == 0) {
+ return -EINVAL;
}
- Status = vendorextnIoctl(Adapter, cmd, arg);
- if (Status != CONTINUE_COMMON_PATH)
- return Status;
-
- switch (cmd) {
- /* Rdms for Swin Idle... */
- case IOCTL_BCM_REGISTER_READ_PRIVATE: {
- struct bcm_rdm_buffer sRdmBuffer = {0};
- PCHAR temp_buff;
- UINT Bufflen;
- u16 temp_value;
-
- /* Copy Ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
+ Bufflen = IoBuffer.OutputLength;
+ temp_value = 4 - (Bufflen % 4);
+ Bufflen += temp_value % 4;
- if (IoBuffer.InputLength > sizeof(sRdmBuffer))
- return -EINVAL;
+ temp_buff = kmalloc(Bufflen, GFP_KERNEL);
+ if (!temp_buff)
+ return -ENOMEM;
- if (copy_from_user(&sRdmBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength))
+ bytes = rdmalt(Adapter, (UINT)sRdmBuffer.Register,
+ (PUINT)temp_buff, Bufflen);
+ if (bytes > 0) {
+ Status = STATUS_SUCCESS;
+ if (copy_to_user(IoBuffer.OutputBuffer, temp_buff, bytes)) {
+ kfree(temp_buff);
return -EFAULT;
-
- if (IoBuffer.OutputLength > USHRT_MAX ||
- IoBuffer.OutputLength == 0) {
- return -EINVAL;
}
+ } else {
+ Status = bytes;
+ }
- Bufflen = IoBuffer.OutputLength;
- temp_value = 4 - (Bufflen % 4);
- Bufflen += temp_value % 4;
+ kfree(temp_buff);
+ return Status;
+}
- temp_buff = kmalloc(Bufflen, GFP_KERNEL);
- if (!temp_buff)
- return -ENOMEM;
+static int bcm_char_ioctl_reg_write_private(void __user *argp, struct bcm_mini_adapter *Adapter)
+{
+ struct bcm_wrm_buffer sWrmBuffer = {0};
+ struct bcm_ioctl_buffer IoBuffer;
+ UINT uiTempVar = 0;
+ INT Status;
- bytes = rdmalt(Adapter, (UINT)sRdmBuffer.Register,
- (PUINT)temp_buff, Bufflen);
- if (bytes > 0) {
- Status = STATUS_SUCCESS;
- if (copy_to_user(IoBuffer.OutputBuffer, temp_buff, bytes)) {
- kfree(temp_buff);
- return -EFAULT;
- }
- } else {
- Status = bytes;
- }
+ /* Copy Ioctl Buffer structure */
- kfree(temp_buff);
- break;
- }
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
+ return -EFAULT;
- case IOCTL_BCM_REGISTER_WRITE_PRIVATE: {
- struct bcm_wrm_buffer sWrmBuffer = {0};
- UINT uiTempVar = 0;
- /* Copy Ioctl Buffer structure */
+ if (IoBuffer.InputLength > sizeof(sWrmBuffer))
+ return -EINVAL;
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
+ /* Get WrmBuffer structure */
+ if (copy_from_user(&sWrmBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength))
+ return -EFAULT;
- if (IoBuffer.InputLength > sizeof(sWrmBuffer))
- return -EINVAL;
+ uiTempVar = sWrmBuffer.Register & EEPROM_REJECT_MASK;
+ if (!((Adapter->pstargetparams->m_u32Customize) & VSG_MODE) &&
+ ((uiTempVar == EEPROM_REJECT_REG_1) ||
+ (uiTempVar == EEPROM_REJECT_REG_2) ||
+ (uiTempVar == EEPROM_REJECT_REG_3) ||
+ (uiTempVar == EEPROM_REJECT_REG_4))) {
- /* Get WrmBuffer structure */
- if (copy_from_user(&sWrmBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength))
- return -EFAULT;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "EEPROM Access Denied, not in VSG Mode\n");
+ return -EFAULT;
+ }
- uiTempVar = sWrmBuffer.Register & EEPROM_REJECT_MASK;
- if (!((Adapter->pstargetparams->m_u32Customize) & VSG_MODE) &&
- ((uiTempVar == EEPROM_REJECT_REG_1) ||
- (uiTempVar == EEPROM_REJECT_REG_2) ||
- (uiTempVar == EEPROM_REJECT_REG_3) ||
- (uiTempVar == EEPROM_REJECT_REG_4))) {
+ Status = wrmalt(Adapter, (UINT)sWrmBuffer.Register,
+ (PUINT)sWrmBuffer.Data, sizeof(ULONG));
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
- "EEPROM Access Denied, not in VSG Mode\n");
- return -EFAULT;
- }
+ if (Status == STATUS_SUCCESS) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+ DBG_LVL_ALL, "WRM Done\n");
+ } else {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+ DBG_LVL_ALL, "WRM Failed\n");
+ Status = -EFAULT;
+ }
+ return Status;
+}
+
+static int bcm_char_ioctl_eeprom_reg_read(void __user *argp, struct bcm_mini_adapter *Adapter)
+{
+ struct bcm_rdm_buffer sRdmBuffer = {0};
+ struct bcm_ioctl_buffer IoBuffer;
+ PCHAR temp_buff = NULL;
+ UINT uiTempVar = 0;
+ INT Status;
+ int bytes;
- Status = wrmalt(Adapter, (UINT)sWrmBuffer.Register,
- (PUINT)sWrmBuffer.Data, sizeof(ULONG));
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
- if (Status == STATUS_SUCCESS) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
- DBG_LVL_ALL, "WRM Done\n");
- } else {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
- DBG_LVL_ALL, "WRM Failed\n");
- Status = -EFAULT;
- }
- break;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "Device in Idle Mode, Blocking Rdms\n");
+ return -EACCES;
}
- case IOCTL_BCM_REGISTER_READ:
- case IOCTL_BCM_EEPROM_REGISTER_READ: {
- struct bcm_rdm_buffer sRdmBuffer = {0};
- PCHAR temp_buff = NULL;
- UINT uiTempVar = 0;
- if ((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus == TRUE) ||
- (Adapter->bPreparingForLowPowerMode == TRUE)) {
+ /* Copy Ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
+ return -EFAULT;
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
- "Device in Idle Mode, Blocking Rdms\n");
- return -EACCES;
- }
+ if (IoBuffer.InputLength > sizeof(sRdmBuffer))
+ return -EINVAL;
- /* Copy Ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
+ if (copy_from_user(&sRdmBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength))
+ return -EFAULT;
- if (IoBuffer.InputLength > sizeof(sRdmBuffer))
- return -EINVAL;
+ if (IoBuffer.OutputLength > USHRT_MAX ||
+ IoBuffer.OutputLength == 0) {
+ return -EINVAL;
+ }
- if (copy_from_user(&sRdmBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength))
- return -EFAULT;
+ temp_buff = kmalloc(IoBuffer.OutputLength, GFP_KERNEL);
+ if (!temp_buff)
+ return STATUS_FAILURE;
- if (IoBuffer.OutputLength > USHRT_MAX ||
- IoBuffer.OutputLength == 0) {
- return -EINVAL;
- }
+ if ((((ULONG)sRdmBuffer.Register & 0x0F000000) != 0x0F000000) ||
+ ((ULONG)sRdmBuffer.Register & 0x3)) {
- temp_buff = kmalloc(IoBuffer.OutputLength, GFP_KERNEL);
- if (!temp_buff)
- return STATUS_FAILURE;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "RDM Done On invalid Address : %x Access Denied.\n",
+ (int)sRdmBuffer.Register);
- if ((((ULONG)sRdmBuffer.Register & 0x0F000000) != 0x0F000000) ||
- ((ULONG)sRdmBuffer.Register & 0x3)) {
+ kfree(temp_buff);
+ return -EINVAL;
+ }
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
- "RDM Done On invalid Address : %x Access Denied.\n",
- (int)sRdmBuffer.Register);
+ uiTempVar = sRdmBuffer.Register & EEPROM_REJECT_MASK;
+ bytes = rdmaltWithLock(Adapter, (UINT)sRdmBuffer.Register,
+ (PUINT)temp_buff, IoBuffer.OutputLength);
+ if (bytes > 0) {
+ Status = STATUS_SUCCESS;
+ if (copy_to_user(IoBuffer.OutputBuffer, temp_buff, bytes)) {
kfree(temp_buff);
- return -EINVAL;
+ return -EFAULT;
}
+ } else {
+ Status = bytes;
+ }
- uiTempVar = sRdmBuffer.Register & EEPROM_REJECT_MASK;
- bytes = rdmaltWithLock(Adapter, (UINT)sRdmBuffer.Register,
- (PUINT)temp_buff, IoBuffer.OutputLength);
+ kfree(temp_buff);
+ return Status;
+}
- if (bytes > 0) {
- Status = STATUS_SUCCESS;
- if (copy_to_user(IoBuffer.OutputBuffer, temp_buff, bytes)) {
- kfree(temp_buff);
- return -EFAULT;
- }
- } else {
- Status = bytes;
- }
+static int bcm_char_ioctl_eeprom_reg_write(void __user *argp, struct bcm_mini_adapter *Adapter, UINT cmd)
+{
+ struct bcm_wrm_buffer sWrmBuffer = {0};
+ struct bcm_ioctl_buffer IoBuffer;
+ UINT uiTempVar = 0;
+ INT Status;
- kfree(temp_buff);
- break;
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "Device in Idle Mode, Blocking Wrms\n");
+ return -EACCES;
}
- case IOCTL_BCM_REGISTER_WRITE:
- case IOCTL_BCM_EEPROM_REGISTER_WRITE: {
- struct bcm_wrm_buffer sWrmBuffer = {0};
- UINT uiTempVar = 0;
- if ((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus == TRUE) ||
- (Adapter->bPreparingForLowPowerMode == TRUE)) {
+ /* Copy Ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
+ return -EFAULT;
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
- "Device in Idle Mode, Blocking Wrms\n");
- return -EACCES;
- }
+ if (IoBuffer.InputLength > sizeof(sWrmBuffer))
+ return -EINVAL;
- /* Copy Ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
+ /* Get WrmBuffer structure */
+ if (copy_from_user(&sWrmBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength))
+ return -EFAULT;
- if (IoBuffer.InputLength > sizeof(sWrmBuffer))
- return -EINVAL;
+ if ((((ULONG)sWrmBuffer.Register & 0x0F000000) != 0x0F000000) ||
+ ((ULONG)sWrmBuffer.Register & 0x3)) {
- /* Get WrmBuffer structure */
- if (copy_from_user(&sWrmBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength))
- return -EFAULT;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "WRM Done On invalid Address : %x Access Denied.\n",
+ (int)sWrmBuffer.Register);
+ return -EINVAL;
+ }
- if ((((ULONG)sWrmBuffer.Register & 0x0F000000) != 0x0F000000) ||
- ((ULONG)sWrmBuffer.Register & 0x3)) {
+ uiTempVar = sWrmBuffer.Register & EEPROM_REJECT_MASK;
+ if (!((Adapter->pstargetparams->m_u32Customize) & VSG_MODE) &&
+ ((uiTempVar == EEPROM_REJECT_REG_1) ||
+ (uiTempVar == EEPROM_REJECT_REG_2) ||
+ (uiTempVar == EEPROM_REJECT_REG_3) ||
+ (uiTempVar == EEPROM_REJECT_REG_4)) &&
+ (cmd == IOCTL_BCM_REGISTER_WRITE)) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
- "WRM Done On invalid Address : %x Access Denied.\n",
- (int)sWrmBuffer.Register);
- return -EINVAL;
- }
-
- uiTempVar = sWrmBuffer.Register & EEPROM_REJECT_MASK;
- if (!((Adapter->pstargetparams->m_u32Customize) & VSG_MODE) &&
- ((uiTempVar == EEPROM_REJECT_REG_1) ||
- (uiTempVar == EEPROM_REJECT_REG_2) ||
- (uiTempVar == EEPROM_REJECT_REG_3) ||
- (uiTempVar == EEPROM_REJECT_REG_4)) &&
- (cmd == IOCTL_BCM_REGISTER_WRITE)) {
-
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
- "EEPROM Access Denied, not in VSG Mode\n");
- return -EFAULT;
- }
+ "EEPROM Access Denied, not in VSG Mode\n");
+ return -EFAULT;
+ }
- Status = wrmaltWithLock(Adapter, (UINT)sWrmBuffer.Register,
- (PUINT)sWrmBuffer.Data,
- sWrmBuffer.Length);
+ Status = wrmaltWithLock(Adapter, (UINT)sWrmBuffer.Register,
+ (PUINT)sWrmBuffer.Data,
+ sWrmBuffer.Length);
- if (Status == STATUS_SUCCESS) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, OSAL_DBG,
- DBG_LVL_ALL, "WRM Done\n");
- } else {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
- DBG_LVL_ALL, "WRM Failed\n");
- Status = -EFAULT;
- }
- break;
+ if (Status == STATUS_SUCCESS) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, OSAL_DBG,
+ DBG_LVL_ALL, "WRM Done\n");
+ } else {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+ DBG_LVL_ALL, "WRM Failed\n");
+ Status = -EFAULT;
}
- case IOCTL_BCM_GPIO_SET_REQUEST: {
- UCHAR ucResetValue[4];
- UINT value = 0;
- UINT uiBit = 0;
- UINT uiOperation = 0;
- struct bcm_gpio_info gpio_info = {0};
+ return Status;
+}
- if ((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus == TRUE) ||
- (Adapter->bPreparingForLowPowerMode == TRUE)) {
+static int bcm_char_ioctl_gpio_set_request(void __user *argp, struct bcm_mini_adapter *Adapter)
+{
+ struct bcm_gpio_info gpio_info = {0};
+ struct bcm_ioctl_buffer IoBuffer;
+ UCHAR ucResetValue[4];
+ UINT value = 0;
+ UINT uiBit = 0;
+ UINT uiOperation = 0;
+ INT Status;
+ int bytes;
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
- DBG_LVL_ALL,
- "GPIO Can't be set/clear in Low power Mode");
- return -EACCES;
- }
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+ DBG_LVL_ALL,
+ "GPIO Can't be set/clear in Low power Mode");
+ return -EACCES;
+ }
- if (IoBuffer.InputLength > sizeof(gpio_info))
- return -EINVAL;
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
+ return -EFAULT;
- if (copy_from_user(&gpio_info, IoBuffer.InputBuffer, IoBuffer.InputLength))
- return -EFAULT;
+ if (IoBuffer.InputLength > sizeof(gpio_info))
+ return -EINVAL;
- uiBit = gpio_info.uiGpioNumber;
- uiOperation = gpio_info.uiGpioValue;
- value = (1<<uiBit);
+ if (copy_from_user(&gpio_info, IoBuffer.InputBuffer, IoBuffer.InputLength))
+ return -EFAULT;
- if (IsReqGpioIsLedInNVM(Adapter, value) == false) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
- DBG_LVL_ALL,
- "Sorry, Requested GPIO<0x%X> is not correspond to LED !!!",
- value);
- Status = -EINVAL;
- break;
- }
+ uiBit = gpio_info.uiGpioNumber;
+ uiOperation = gpio_info.uiGpioValue;
+ value = (1<<uiBit);
- /* Set - setting 1 */
- if (uiOperation) {
- /* Set the gpio output register */
- Status = wrmaltWithLock(Adapter,
- BCM_GPIO_OUTPUT_SET_REG,
- (PUINT)(&value), sizeof(UINT));
-
- if (Status == STATUS_SUCCESS) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
- OSAL_DBG, DBG_LVL_ALL,
- "Set the GPIO bit\n");
- } else {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
- OSAL_DBG, DBG_LVL_ALL,
- "Failed to set the %dth GPIO\n",
- uiBit);
- break;
- }
- } else {
- /* Set the gpio output register */
- Status = wrmaltWithLock(Adapter,
- BCM_GPIO_OUTPUT_CLR_REG,
- (PUINT)(&value), sizeof(UINT));
-
- if (Status == STATUS_SUCCESS) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
- OSAL_DBG, DBG_LVL_ALL,
- "Set the GPIO bit\n");
- } else {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
- OSAL_DBG, DBG_LVL_ALL,
- "Failed to clear the %dth GPIO\n",
- uiBit);
- break;
- }
- }
+ if (IsReqGpioIsLedInNVM(Adapter, value) == false) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+ DBG_LVL_ALL,
+ "Sorry, Requested GPIO<0x%X> is not correspond to LED !!!",
+ value);
+ return -EINVAL;
+ }
- bytes = rdmaltWithLock(Adapter, (UINT)GPIO_MODE_REGISTER,
- (PUINT)ucResetValue, sizeof(UINT));
- if (bytes < 0) {
- Status = bytes;
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
- "GPIO_MODE_REGISTER read failed");
- break;
+ /* Set - setting 1 */
+ if (uiOperation) {
+ /* Set the gpio output register */
+ Status = wrmaltWithLock(Adapter,
+ BCM_GPIO_OUTPUT_SET_REG,
+ (PUINT)(&value), sizeof(UINT));
+
+ if (Status == STATUS_SUCCESS) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+ OSAL_DBG, DBG_LVL_ALL,
+ "Set the GPIO bit\n");
} else {
- Status = STATUS_SUCCESS;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+ OSAL_DBG, DBG_LVL_ALL,
+ "Failed to set the %dth GPIO\n",
+ uiBit);
+ return Status;
}
-
- /* Set the gpio mode register to output */
- *(UINT *)ucResetValue |= (1<<uiBit);
- Status = wrmaltWithLock(Adapter, GPIO_MODE_REGISTER,
- (PUINT)ucResetValue, sizeof(UINT));
+ } else {
+ /* Set the gpio output register */
+ Status = wrmaltWithLock(Adapter,
+ BCM_GPIO_OUTPUT_CLR_REG,
+ (PUINT)(&value), sizeof(UINT));
if (Status == STATUS_SUCCESS) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
- DBG_LVL_ALL,
- "Set the GPIO to output Mode\n");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+ OSAL_DBG, DBG_LVL_ALL,
+ "Set the GPIO bit\n");
} else {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
- DBG_LVL_ALL,
- "Failed to put GPIO in Output Mode\n");
- break;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+ OSAL_DBG, DBG_LVL_ALL,
+ "Failed to clear the %dth GPIO\n",
+ uiBit);
+ return Status;
}
}
- break;
- case BCM_LED_THREAD_STATE_CHANGE_REQ: {
- struct bcm_user_thread_req threadReq = {0};
+ bytes = rdmaltWithLock(Adapter, (UINT)GPIO_MODE_REGISTER,
+ (PUINT)ucResetValue, sizeof(UINT));
+ if (bytes < 0) {
+ Status = bytes;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
- "User made LED thread InActive");
+ "GPIO_MODE_REGISTER read failed");
+ return Status;
+ } else {
+ Status = STATUS_SUCCESS;
+ }
- if ((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus == TRUE) ||
- (Adapter->bPreparingForLowPowerMode == TRUE)) {
+ /* Set the gpio mode register to output */
+ *(UINT *)ucResetValue |= (1<<uiBit);
+ Status = wrmaltWithLock(Adapter, GPIO_MODE_REGISTER,
+ (PUINT)ucResetValue, sizeof(UINT));
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
- DBG_LVL_ALL,
- "GPIO Can't be set/clear in Low power Mode");
- Status = -EACCES;
- break;
- }
+ if (Status == STATUS_SUCCESS) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+ DBG_LVL_ALL,
+ "Set the GPIO to output Mode\n");
+ } else {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+ DBG_LVL_ALL,
+ "Failed to put GPIO in Output Mode\n");
+ }
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
+ return Status;
+}
- if (IoBuffer.InputLength > sizeof(threadReq))
- return -EINVAL;
+static int bcm_char_ioctl_led_thread_state_change_req(void __user *argp, struct bcm_mini_adapter *Adapter)
+{
+ struct bcm_user_thread_req threadReq = {0};
+ struct bcm_ioctl_buffer IoBuffer;
- if (copy_from_user(&threadReq, IoBuffer.InputBuffer, IoBuffer.InputLength))
- return -EFAULT;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+ "User made LED thread InActive");
- /* if LED thread is running(Actively or Inactively) set it state to make inactive */
- if (Adapter->LEDInfo.led_thread_running) {
- if (threadReq.ThreadState == LED_THREAD_ACTIVATION_REQ) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
- OSAL_DBG, DBG_LVL_ALL,
- "Activating thread req");
- Adapter->DriverState = LED_THREAD_ACTIVE;
- } else {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
- OSAL_DBG, DBG_LVL_ALL,
- "DeActivating Thread req.....");
- Adapter->DriverState = LED_THREAD_INACTIVE;
- }
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
- /* signal thread. */
- wake_up(&Adapter->LEDInfo.notify_led_event);
- }
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+ DBG_LVL_ALL,
+ "GPIO Can't be set/clear in Low power Mode");
+ return -EACCES;
}
- break;
- case IOCTL_BCM_GPIO_STATUS_REQUEST: {
- ULONG uiBit = 0;
- UCHAR ucRead[4];
- struct bcm_gpio_info gpio_info = {0};
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
+ return -EFAULT;
- if ((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus == TRUE) ||
- (Adapter->bPreparingForLowPowerMode == TRUE))
- return -EACCES;
+ if (IoBuffer.InputLength > sizeof(threadReq))
+ return -EINVAL;
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
+ if (copy_from_user(&threadReq, IoBuffer.InputBuffer, IoBuffer.InputLength))
+ return -EFAULT;
- if (IoBuffer.InputLength > sizeof(gpio_info))
- return -EINVAL;
+ /* if LED thread is running(Actively or Inactively) set it state to make inactive */
+ if (Adapter->LEDInfo.led_thread_running) {
+ if (threadReq.ThreadState == LED_THREAD_ACTIVATION_REQ) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+ OSAL_DBG, DBG_LVL_ALL,
+ "Activating thread req");
+ Adapter->DriverState = LED_THREAD_ACTIVE;
+ } else {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+ OSAL_DBG, DBG_LVL_ALL,
+ "DeActivating Thread req.....");
+ Adapter->DriverState = LED_THREAD_INACTIVE;
+ }
- if (copy_from_user(&gpio_info, IoBuffer.InputBuffer, IoBuffer.InputLength))
- return -EFAULT;
+ /* signal thread. */
+ wake_up(&Adapter->LEDInfo.notify_led_event);
+ }
+ return STATUS_SUCCESS;
+}
- uiBit = gpio_info.uiGpioNumber;
+static int bcm_char_ioctl_gpio_status_request(void __user *argp, struct bcm_mini_adapter *Adapter)
+{
+ struct bcm_gpio_info gpio_info = {0};
+ struct bcm_ioctl_buffer IoBuffer;
+ ULONG uiBit = 0;
+ UCHAR ucRead[4];
+ INT Status;
+ int bytes;
- /* Set the gpio output register */
- bytes = rdmaltWithLock(Adapter, (UINT)GPIO_PIN_STATE_REGISTER,
- (PUINT)ucRead, sizeof(UINT));
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE))
+ return -EACCES;
- if (bytes < 0) {
- Status = bytes;
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
- "RDM Failed\n");
- return Status;
- } else {
- Status = STATUS_SUCCESS;
- }
- }
- break;
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
+ return -EFAULT;
- case IOCTL_BCM_GPIO_MULTI_REQUEST: {
- UCHAR ucResetValue[4];
- struct bcm_gpio_multi_info gpio_multi_info[MAX_IDX];
- struct bcm_gpio_multi_info *pgpio_multi_info = (struct bcm_gpio_multi_info *)gpio_multi_info;
+ if (IoBuffer.InputLength > sizeof(gpio_info))
+ return -EINVAL;
- memset(pgpio_multi_info, 0, MAX_IDX * sizeof(struct bcm_gpio_multi_info));
+ if (copy_from_user(&gpio_info, IoBuffer.InputBuffer, IoBuffer.InputLength))
+ return -EFAULT;
- if ((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus == TRUE) ||
- (Adapter->bPreparingForLowPowerMode == TRUE))
- return -EINVAL;
+ uiBit = gpio_info.uiGpioNumber;
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
+ /* Set the gpio output register */
+ bytes = rdmaltWithLock(Adapter, (UINT)GPIO_PIN_STATE_REGISTER,
+ (PUINT)ucRead, sizeof(UINT));
- if (IoBuffer.InputLength > sizeof(gpio_multi_info))
- return -EINVAL;
+ if (bytes < 0) {
+ Status = bytes;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "RDM Failed\n");
+ return Status;
+ } else {
+ Status = STATUS_SUCCESS;
+ }
+ return Status;
+}
- if (copy_from_user(&gpio_multi_info, IoBuffer.InputBuffer, IoBuffer.InputLength))
- return -EFAULT;
+static int bcm_char_ioctl_gpio_multi_request(void __user *argp, struct bcm_mini_adapter *Adapter)
+{
+ struct bcm_gpio_multi_info gpio_multi_info[MAX_IDX];
+ struct bcm_gpio_multi_info *pgpio_multi_info = (struct bcm_gpio_multi_info *)gpio_multi_info;
+ struct bcm_ioctl_buffer IoBuffer;
+ UCHAR ucResetValue[4];
+ INT Status = STATUS_FAILURE;
+ int bytes;
- if (IsReqGpioIsLedInNVM(Adapter, pgpio_multi_info[WIMAX_IDX].uiGPIOMask) == false) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
- DBG_LVL_ALL,
- "Sorry, Requested GPIO<0x%X> is not correspond to NVM LED bit map<0x%X>!!!",
- pgpio_multi_info[WIMAX_IDX].uiGPIOMask,
- Adapter->gpioBitMap);
- Status = -EINVAL;
- break;
- }
+ memset(pgpio_multi_info, 0, MAX_IDX * sizeof(struct bcm_gpio_multi_info));
- /* Set the gpio output register */
- if ((pgpio_multi_info[WIMAX_IDX].uiGPIOMask) &
- (pgpio_multi_info[WIMAX_IDX].uiGPIOCommand)) {
- /* Set 1's in GPIO OUTPUT REGISTER */
- *(UINT *)ucResetValue = pgpio_multi_info[WIMAX_IDX].uiGPIOMask &
- pgpio_multi_info[WIMAX_IDX].uiGPIOCommand &
- pgpio_multi_info[WIMAX_IDX].uiGPIOValue;
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE))
+ return -EINVAL;
- if (*(UINT *) ucResetValue)
- Status = wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_SET_REG,
- (PUINT)ucResetValue, sizeof(ULONG));
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
+ return -EFAULT;
- if (Status != STATUS_SUCCESS) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
- "WRM to BCM_GPIO_OUTPUT_SET_REG Failed.");
- return Status;
- }
+ if (IoBuffer.InputLength > sizeof(gpio_multi_info))
+ return -EINVAL;
- /* Clear to 0's in GPIO OUTPUT REGISTER */
- *(UINT *)ucResetValue = (pgpio_multi_info[WIMAX_IDX].uiGPIOMask &
- pgpio_multi_info[WIMAX_IDX].uiGPIOCommand &
- (~(pgpio_multi_info[WIMAX_IDX].uiGPIOValue)));
+ if (copy_from_user(&gpio_multi_info, IoBuffer.InputBuffer, IoBuffer.InputLength))
+ return -EFAULT;
- if (*(UINT *) ucResetValue)
- Status = wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, (PUINT)ucResetValue, sizeof(ULONG));
+ if (IsReqGpioIsLedInNVM(Adapter, pgpio_multi_info[WIMAX_IDX].uiGPIOMask) == false) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+ DBG_LVL_ALL,
+ "Sorry, Requested GPIO<0x%X> is not correspond to NVM LED bit map<0x%X>!!!",
+ pgpio_multi_info[WIMAX_IDX].uiGPIOMask,
+ Adapter->gpioBitMap);
+ return -EINVAL;
+ }
- if (Status != STATUS_SUCCESS) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
- "WRM to BCM_GPIO_OUTPUT_CLR_REG Failed.");
- return Status;
- }
+ /* Set the gpio output register */
+ if ((pgpio_multi_info[WIMAX_IDX].uiGPIOMask) &
+ (pgpio_multi_info[WIMAX_IDX].uiGPIOCommand)) {
+ /* Set 1's in GPIO OUTPUT REGISTER */
+ *(UINT *)ucResetValue = pgpio_multi_info[WIMAX_IDX].uiGPIOMask &
+ pgpio_multi_info[WIMAX_IDX].uiGPIOCommand &
+ pgpio_multi_info[WIMAX_IDX].uiGPIOValue;
+
+ if (*(UINT *) ucResetValue)
+ Status = wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_SET_REG,
+ (PUINT)ucResetValue, sizeof(ULONG));
+
+ if (Status != STATUS_SUCCESS) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "WRM to BCM_GPIO_OUTPUT_SET_REG Failed.");
+ return Status;
}
- if (pgpio_multi_info[WIMAX_IDX].uiGPIOMask) {
- bytes = rdmaltWithLock(Adapter, (UINT)GPIO_PIN_STATE_REGISTER, (PUINT)ucResetValue, sizeof(UINT));
+ /* Clear to 0's in GPIO OUTPUT REGISTER */
+ *(UINT *)ucResetValue = (pgpio_multi_info[WIMAX_IDX].uiGPIOMask &
+ pgpio_multi_info[WIMAX_IDX].uiGPIOCommand &
+ (~(pgpio_multi_info[WIMAX_IDX].uiGPIOValue)));
- if (bytes < 0) {
- Status = bytes;
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
- "RDM to GPIO_PIN_STATE_REGISTER Failed.");
- return Status;
- } else {
- Status = STATUS_SUCCESS;
- }
+ if (*(UINT *) ucResetValue)
+ Status = wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, (PUINT)ucResetValue, sizeof(ULONG));
- pgpio_multi_info[WIMAX_IDX].uiGPIOValue = (*(UINT *)ucResetValue &
- pgpio_multi_info[WIMAX_IDX].uiGPIOMask);
+ if (Status != STATUS_SUCCESS) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "WRM to BCM_GPIO_OUTPUT_CLR_REG Failed.");
+ return Status;
}
+ }
- Status = copy_to_user(IoBuffer.OutputBuffer, &gpio_multi_info, IoBuffer.OutputLength);
- if (Status) {
+ if (pgpio_multi_info[WIMAX_IDX].uiGPIOMask) {
+ bytes = rdmaltWithLock(Adapter, (UINT)GPIO_PIN_STATE_REGISTER, (PUINT)ucResetValue, sizeof(UINT));
+
+ if (bytes < 0) {
+ Status = bytes;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
- "Failed while copying Content to IOBufer for user space err:%d", Status);
- return -EFAULT;
+ "RDM to GPIO_PIN_STATE_REGISTER Failed.");
+ return Status;
+ } else {
+ Status = STATUS_SUCCESS;
}
+
+ pgpio_multi_info[WIMAX_IDX].uiGPIOValue = (*(UINT *)ucResetValue &
+ pgpio_multi_info[WIMAX_IDX].uiGPIOMask);
}
- break;
- case IOCTL_BCM_GPIO_MODE_REQUEST: {
- UCHAR ucResetValue[4];
- struct bcm_gpio_multi_mode gpio_multi_mode[MAX_IDX];
- struct bcm_gpio_multi_mode *pgpio_multi_mode = (struct bcm_gpio_multi_mode *)gpio_multi_mode;
+ Status = copy_to_user(IoBuffer.OutputBuffer, &gpio_multi_info, IoBuffer.OutputLength);
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "Failed while copying Content to IOBufer for user space err:%d", Status);
+ return -EFAULT;
+ }
+ return Status;
+}
- if ((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus == TRUE) ||
- (Adapter->bPreparingForLowPowerMode == TRUE))
- return -EINVAL;
+static int bcm_char_ioctl_gpio_mode_request(void __user *argp, struct bcm_mini_adapter *Adapter)
+{
+ struct bcm_gpio_multi_mode gpio_multi_mode[MAX_IDX];
+ struct bcm_gpio_multi_mode *pgpio_multi_mode = (struct bcm_gpio_multi_mode *)gpio_multi_mode;
+ struct bcm_ioctl_buffer IoBuffer;
+ UCHAR ucResetValue[4];
+ INT Status;
+ int bytes;
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE))
+ return -EINVAL;
- if (IoBuffer.InputLength > sizeof(gpio_multi_mode))
- return -EINVAL;
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
+ return -EFAULT;
- if (copy_from_user(&gpio_multi_mode, IoBuffer.InputBuffer, IoBuffer.InputLength))
- return -EFAULT;
+ if (IoBuffer.InputLength > sizeof(gpio_multi_mode))
+ return -EINVAL;
- bytes = rdmaltWithLock(Adapter, (UINT)GPIO_MODE_REGISTER, (PUINT)ucResetValue, sizeof(UINT));
+ if (copy_from_user(&gpio_multi_mode, IoBuffer.InputBuffer, IoBuffer.InputLength))
+ return -EFAULT;
- if (bytes < 0) {
- Status = bytes;
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Read of GPIO_MODE_REGISTER failed");
- return Status;
- } else {
- Status = STATUS_SUCCESS;
- }
+ bytes = rdmaltWithLock(Adapter, (UINT)GPIO_MODE_REGISTER, (PUINT)ucResetValue, sizeof(UINT));
- /* Validating the request */
- if (IsReqGpioIsLedInNVM(Adapter, pgpio_multi_mode[WIMAX_IDX].uiGPIOMask) == false) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
- "Sorry, Requested GPIO<0x%X> is not correspond to NVM LED bit map<0x%X>!!!",
- pgpio_multi_mode[WIMAX_IDX].uiGPIOMask, Adapter->gpioBitMap);
- Status = -EINVAL;
- break;
- }
+ if (bytes < 0) {
+ Status = bytes;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Read of GPIO_MODE_REGISTER failed");
+ return Status;
+ } else {
+ Status = STATUS_SUCCESS;
+ }
- if (pgpio_multi_mode[WIMAX_IDX].uiGPIOMask) {
- /* write all OUT's (1's) */
- *(UINT *) ucResetValue |= (pgpio_multi_mode[WIMAX_IDX].uiGPIOMode &
- pgpio_multi_mode[WIMAX_IDX].uiGPIOMask);
+ /* Validating the request */
+ if (IsReqGpioIsLedInNVM(Adapter, pgpio_multi_mode[WIMAX_IDX].uiGPIOMask) == false) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+ "Sorry, Requested GPIO<0x%X> is not correspond to NVM LED bit map<0x%X>!!!",
+ pgpio_multi_mode[WIMAX_IDX].uiGPIOMask, Adapter->gpioBitMap);
+ return -EINVAL;
+ }
- /* write all IN's (0's) */
- *(UINT *) ucResetValue &= ~((~pgpio_multi_mode[WIMAX_IDX].uiGPIOMode) &
- pgpio_multi_mode[WIMAX_IDX].uiGPIOMask);
+ if (pgpio_multi_mode[WIMAX_IDX].uiGPIOMask) {
+ /* write all OUT's (1's) */
+ *(UINT *) ucResetValue |= (pgpio_multi_mode[WIMAX_IDX].uiGPIOMode &
+ pgpio_multi_mode[WIMAX_IDX].uiGPIOMask);
- /* Currently implemented return the modes of all GPIO's
- * else needs to bit AND with mask
- */
- pgpio_multi_mode[WIMAX_IDX].uiGPIOMode = *(UINT *)ucResetValue;
+ /* write all IN's (0's) */
+ *(UINT *) ucResetValue &= ~((~pgpio_multi_mode[WIMAX_IDX].uiGPIOMode) &
+ pgpio_multi_mode[WIMAX_IDX].uiGPIOMask);
- Status = wrmaltWithLock(Adapter, GPIO_MODE_REGISTER, (PUINT)ucResetValue, sizeof(ULONG));
- if (Status == STATUS_SUCCESS) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
- "WRM to GPIO_MODE_REGISTER Done");
- } else {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
- "WRM to GPIO_MODE_REGISTER Failed");
- Status = -EFAULT;
- break;
- }
- } else {
-/* if uiGPIOMask is 0 then return mode register configuration */
- pgpio_multi_mode[WIMAX_IDX].uiGPIOMode = *(UINT *)ucResetValue;
- }
+ /* Currently implemented return the modes of all GPIO's
+ * else needs to bit AND with mask
+ */
+ pgpio_multi_mode[WIMAX_IDX].uiGPIOMode = *(UINT *)ucResetValue;
- Status = copy_to_user(IoBuffer.OutputBuffer, &gpio_multi_mode, IoBuffer.OutputLength);
- if (Status) {
+ Status = wrmaltWithLock(Adapter, GPIO_MODE_REGISTER, (PUINT)ucResetValue, sizeof(ULONG));
+ if (Status == STATUS_SUCCESS) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+ "WRM to GPIO_MODE_REGISTER Done");
+ } else {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
- "Failed while copying Content to IOBufer for user space err:%d", Status);
+ "WRM to GPIO_MODE_REGISTER Failed");
return -EFAULT;
}
+ } else {
+ /* if uiGPIOMask is 0 then return mode register configuration */
+ pgpio_multi_mode[WIMAX_IDX].uiGPIOMode = *(UINT *)ucResetValue;
}
- break;
- case IOCTL_MAC_ADDR_REQ:
- case IOCTL_LINK_REQ:
- case IOCTL_CM_REQUEST:
- case IOCTL_SS_INFO_REQ:
- case IOCTL_SEND_CONTROL_MESSAGE:
- case IOCTL_IDLE_REQ: {
- PVOID pvBuffer = NULL;
+ Status = copy_to_user(IoBuffer.OutputBuffer, &gpio_multi_mode, IoBuffer.OutputLength);
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "Failed while copying Content to IOBufer for user space err:%d", Status);
+ return -EFAULT;
+ }
+ return Status;
+}
- /* Copy Ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
+static int bcm_char_ioctl_misc_request(void __user *argp, struct bcm_mini_adapter *Adapter)
+{
+ struct bcm_ioctl_buffer IoBuffer;
+ PVOID pvBuffer = NULL;
+ INT Status;
- if (IoBuffer.InputLength < sizeof(struct bcm_link_request))
- return -EINVAL;
+ /* Copy Ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
+ return -EFAULT;
- if (IoBuffer.InputLength > MAX_CNTL_PKT_SIZE)
- return -EINVAL;
+ if (IoBuffer.InputLength < sizeof(struct bcm_link_request))
+ return -EINVAL;
- pvBuffer = memdup_user(IoBuffer.InputBuffer,
- IoBuffer.InputLength);
- if (IS_ERR(pvBuffer))
- return PTR_ERR(pvBuffer);
+ if (IoBuffer.InputLength > MAX_CNTL_PKT_SIZE)
+ return -EINVAL;
- down(&Adapter->LowPowerModeSync);
- Status = wait_event_interruptible_timeout(Adapter->lowpower_mode_wait_queue,
- !Adapter->bPreparingForLowPowerMode,
- (1 * HZ));
- if (Status == -ERESTARTSYS)
- goto cntrlEnd;
+ pvBuffer = memdup_user(IoBuffer.InputBuffer,
+ IoBuffer.InputLength);
+ if (IS_ERR(pvBuffer))
+ return PTR_ERR(pvBuffer);
- if (Adapter->bPreparingForLowPowerMode) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
- "Preparing Idle Mode is still True - Hence Rejecting control message\n");
- Status = STATUS_FAILURE;
- goto cntrlEnd;
- }
- Status = CopyBufferToControlPacket(Adapter, (PVOID)pvBuffer);
+ down(&Adapter->LowPowerModeSync);
+ Status = wait_event_interruptible_timeout(Adapter->lowpower_mode_wait_queue,
+ !Adapter->bPreparingForLowPowerMode,
+ (1 * HZ));
+ if (Status == -ERESTARTSYS)
+ goto cntrlEnd;
-cntrlEnd:
- up(&Adapter->LowPowerModeSync);
- kfree(pvBuffer);
- break;
+ if (Adapter->bPreparingForLowPowerMode) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+ "Preparing Idle Mode is still True - Hence Rejecting control message\n");
+ Status = STATUS_FAILURE;
+ goto cntrlEnd;
}
+ Status = CopyBufferToControlPacket(Adapter, (PVOID)pvBuffer);
- case IOCTL_BCM_BUFFER_DOWNLOAD_START: {
- if (down_trylock(&Adapter->NVMRdmWrmLock)) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
- "IOCTL_BCM_CHIP_RESET not allowed as EEPROM Read/Write is in progress\n");
- return -EACCES;
- }
+cntrlEnd:
+ up(&Adapter->LowPowerModeSync);
+ kfree(pvBuffer);
+ return Status;
+}
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
- "Starting the firmware download PID =0x%x!!!!\n", current->pid);
-
- if (down_trylock(&Adapter->fw_download_sema))
- return -EBUSY;
-
- Adapter->bBinDownloaded = false;
- Adapter->fw_download_process_pid = current->pid;
- Adapter->bCfgDownloaded = false;
- Adapter->fw_download_done = false;
- netif_carrier_off(Adapter->dev);
- netif_stop_queue(Adapter->dev);
- Status = reset_card_proc(Adapter);
- if (Status) {
- pr_err(PFX "%s: reset_card_proc Failed!\n", Adapter->dev->name);
- up(&Adapter->fw_download_sema);
- up(&Adapter->NVMRdmWrmLock);
- return Status;
- }
- mdelay(10);
+static int bcm_char_ioctl_buffer_download_start(struct bcm_mini_adapter *Adapter)
+{
+ INT Status;
+
+ if (down_trylock(&Adapter->NVMRdmWrmLock)) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+ "IOCTL_BCM_CHIP_RESET not allowed as EEPROM Read/Write is in progress\n");
+ return -EACCES;
+ }
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "Starting the firmware download PID =0x%x!!!!\n", current->pid);
+
+ if (down_trylock(&Adapter->fw_download_sema))
+ return -EBUSY;
+
+ Adapter->bBinDownloaded = false;
+ Adapter->fw_download_process_pid = current->pid;
+ Adapter->bCfgDownloaded = false;
+ Adapter->fw_download_done = false;
+ netif_carrier_off(Adapter->dev);
+ netif_stop_queue(Adapter->dev);
+ Status = reset_card_proc(Adapter);
+ if (Status) {
+ pr_err(PFX "%s: reset_card_proc Failed!\n", Adapter->dev->name);
+ up(&Adapter->fw_download_sema);
up(&Adapter->NVMRdmWrmLock);
return Status;
}
+ mdelay(10);
- case IOCTL_BCM_BUFFER_DOWNLOAD: {
- struct bcm_firmware_info *psFwInfo = NULL;
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Starting the firmware download PID =0x%x!!!!\n", current->pid);
+ up(&Adapter->NVMRdmWrmLock);
+ return Status;
+}
- if (!down_trylock(&Adapter->fw_download_sema)) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
- "Invalid way to download buffer. Use Start and then call this!!!\n");
- up(&Adapter->fw_download_sema);
- Status = -EINVAL;
- return Status;
- }
+static int bcm_char_ioctl_buffer_download(void __user *argp, struct bcm_mini_adapter *Adapter)
+{
+ struct bcm_firmware_info *psFwInfo = NULL;
+ struct bcm_ioctl_buffer IoBuffer;
+ INT Status;
- /* Copy Ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) {
- up(&Adapter->fw_download_sema);
- return -EFAULT;
- }
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Starting the firmware download PID =0x%x!!!!\n", current->pid);
+ if (!down_trylock(&Adapter->fw_download_sema)) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
- "Length for FW DLD is : %lx\n", IoBuffer.InputLength);
-
- if (IoBuffer.InputLength > sizeof(struct bcm_firmware_info)) {
- up(&Adapter->fw_download_sema);
- return -EINVAL;
- }
-
- psFwInfo = kmalloc(sizeof(*psFwInfo), GFP_KERNEL);
- if (!psFwInfo) {
- up(&Adapter->fw_download_sema);
- return -ENOMEM;
- }
-
- if (copy_from_user(psFwInfo, IoBuffer.InputBuffer, IoBuffer.InputLength)) {
- up(&Adapter->fw_download_sema);
- kfree(psFwInfo);
- return -EFAULT;
- }
-
- if (!psFwInfo->pvMappedFirmwareAddress ||
- (psFwInfo->u32FirmwareLength == 0)) {
+ "Invalid way to download buffer. Use Start and then call this!!!\n");
+ up(&Adapter->fw_download_sema);
+ return -EINVAL;
+ }
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Something else is wrong %lu\n",
- psFwInfo->u32FirmwareLength);
- up(&Adapter->fw_download_sema);
- kfree(psFwInfo);
- Status = -EINVAL;
- return Status;
- }
+ /* Copy Ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) {
+ up(&Adapter->fw_download_sema);
+ return -EFAULT;
+ }
- Status = bcm_ioctl_fw_download(Adapter, psFwInfo);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "Length for FW DLD is : %lx\n", IoBuffer.InputLength);
- if (Status != STATUS_SUCCESS) {
- if (psFwInfo->u32StartingAddress == CONFIG_BEGIN_ADDR)
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "IOCTL: Configuration File Upload Failed\n");
- else
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "IOCTL: Firmware File Upload Failed\n");
+ if (IoBuffer.InputLength > sizeof(struct bcm_firmware_info)) {
+ up(&Adapter->fw_download_sema);
+ return -EINVAL;
+ }
- /* up(&Adapter->fw_download_sema); */
+ psFwInfo = kmalloc(sizeof(*psFwInfo), GFP_KERNEL);
+ if (!psFwInfo) {
+ up(&Adapter->fw_download_sema);
+ return -ENOMEM;
+ }
- if (Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY) {
- Adapter->DriverState = DRIVER_INIT;
- Adapter->LEDInfo.bLedInitDone = false;
- wake_up(&Adapter->LEDInfo.notify_led_event);
- }
- }
+ if (copy_from_user(psFwInfo, IoBuffer.InputBuffer, IoBuffer.InputLength)) {
+ up(&Adapter->fw_download_sema);
+ kfree(psFwInfo);
+ return -EFAULT;
+ }
- if (Status != STATUS_SUCCESS)
- up(&Adapter->fw_download_sema);
+ if (!psFwInfo->pvMappedFirmwareAddress ||
+ (psFwInfo->u32FirmwareLength == 0)) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, OSAL_DBG, DBG_LVL_ALL, "IOCTL: Firmware File Uploaded\n");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Something else is wrong %lu\n",
+ psFwInfo->u32FirmwareLength);
+ up(&Adapter->fw_download_sema);
kfree(psFwInfo);
+ Status = -EINVAL;
return Status;
}
- case IOCTL_BCM_BUFFER_DOWNLOAD_STOP: {
- if (!down_trylock(&Adapter->fw_download_sema)) {
- up(&Adapter->fw_download_sema);
- return -EINVAL;
- }
-
- if (down_trylock(&Adapter->NVMRdmWrmLock)) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
- "FW download blocked as EEPROM Read/Write is in progress\n");
- up(&Adapter->fw_download_sema);
- return -EACCES;
- }
-
- Adapter->bBinDownloaded = TRUE;
- Adapter->bCfgDownloaded = TRUE;
- atomic_set(&Adapter->CurrNumFreeTxDesc, 0);
- Adapter->CurrNumRecvDescs = 0;
- Adapter->downloadDDR = 0;
-
- /* setting the Mips to Run */
- Status = run_card_proc(Adapter);
+ Status = bcm_ioctl_fw_download(Adapter, psFwInfo);
- if (Status) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Firm Download Failed\n");
- up(&Adapter->fw_download_sema);
- up(&Adapter->NVMRdmWrmLock);
- return Status;
- } else {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
- DBG_LVL_ALL, "Firm Download Over...\n");
- }
+ if (Status != STATUS_SUCCESS) {
+ if (psFwInfo->u32StartingAddress == CONFIG_BEGIN_ADDR)
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "IOCTL: Configuration File Upload Failed\n");
+ else
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "IOCTL: Firmware File Upload Failed\n");
- mdelay(10);
-
- /* Wait for MailBox Interrupt */
- if (StartInterruptUrb((struct bcm_interface_adapter *)Adapter->pvInterfaceAdapter))
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Unable to send interrupt...\n");
-
- timeout = 5*HZ;
- Adapter->waiting_to_fw_download_done = false;
- wait_event_timeout(Adapter->ioctl_fw_dnld_wait_queue,
- Adapter->waiting_to_fw_download_done, timeout);
- Adapter->fw_download_process_pid = INVALID_PID;
- Adapter->fw_download_done = TRUE;
- atomic_set(&Adapter->CurrNumFreeTxDesc, 0);
- Adapter->CurrNumRecvDescs = 0;
- Adapter->PrevNumRecvDescs = 0;
- atomic_set(&Adapter->cntrlpktCnt, 0);
- Adapter->LinkUpStatus = 0;
- Adapter->LinkStatus = 0;
+ /* up(&Adapter->fw_download_sema); */
if (Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY) {
- Adapter->DriverState = FW_DOWNLOAD_DONE;
+ Adapter->DriverState = DRIVER_INIT;
+ Adapter->LEDInfo.bLedInitDone = false;
wake_up(&Adapter->LEDInfo.notify_led_event);
}
+ }
+
+ if (Status != STATUS_SUCCESS)
+ up(&Adapter->fw_download_sema);
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, OSAL_DBG, DBG_LVL_ALL, "IOCTL: Firmware File Uploaded\n");
+ kfree(psFwInfo);
+ return Status;
+}
- if (!timeout)
- Status = -ENODEV;
+static int bcm_char_ioctl_buffer_download_stop(void __user *argp, struct bcm_mini_adapter *Adapter)
+{
+ INT Status;
+ int timeout = 0;
+ if (!down_trylock(&Adapter->fw_download_sema)) {
up(&Adapter->fw_download_sema);
- up(&Adapter->NVMRdmWrmLock);
- return Status;
+ return -EINVAL;
}
- case IOCTL_BE_BUCKET_SIZE:
- Status = 0;
- if (get_user(Adapter->BEBucketSize, (unsigned long __user *)arg))
- Status = -EFAULT;
- break;
+ if (down_trylock(&Adapter->NVMRdmWrmLock)) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "FW download blocked as EEPROM Read/Write is in progress\n");
+ up(&Adapter->fw_download_sema);
+ return -EACCES;
+ }
- case IOCTL_RTPS_BUCKET_SIZE:
- Status = 0;
- if (get_user(Adapter->rtPSBucketSize, (unsigned long __user *)arg))
- Status = -EFAULT;
- break;
+ Adapter->bBinDownloaded = TRUE;
+ Adapter->bCfgDownloaded = TRUE;
+ atomic_set(&Adapter->CurrNumFreeTxDesc, 0);
+ Adapter->CurrNumRecvDescs = 0;
+ Adapter->downloadDDR = 0;
- case IOCTL_CHIP_RESET: {
- INT NVMAccess = down_trylock(&Adapter->NVMRdmWrmLock);
- if (NVMAccess) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, " IOCTL_BCM_CHIP_RESET not allowed as EEPROM Read/Write is in progress\n");
- return -EACCES;
- }
+ /* setting the Mips to Run */
+ Status = run_card_proc(Adapter);
- down(&Adapter->RxAppControlQueuelock);
- Status = reset_card_proc(Adapter);
- flushAllAppQ();
- up(&Adapter->RxAppControlQueuelock);
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Firm Download Failed\n");
+ up(&Adapter->fw_download_sema);
up(&Adapter->NVMRdmWrmLock);
- ResetCounters(Adapter);
- break;
+ return Status;
+ } else {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+ DBG_LVL_ALL, "Firm Download Over...\n");
}
- case IOCTL_QOS_THRESHOLD: {
- USHORT uiLoopIndex;
-
- Status = 0;
- for (uiLoopIndex = 0; uiLoopIndex < NO_OF_QUEUES; uiLoopIndex++) {
- if (get_user(Adapter->PackInfo[uiLoopIndex].uiThreshold,
- (unsigned long __user *)arg)) {
- Status = -EFAULT;
- break;
- }
- }
- break;
+ mdelay(10);
+
+ /* Wait for MailBox Interrupt */
+ if (StartInterruptUrb((struct bcm_interface_adapter *)Adapter->pvInterfaceAdapter))
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Unable to send interrupt...\n");
+
+ timeout = 5*HZ;
+ Adapter->waiting_to_fw_download_done = false;
+ wait_event_timeout(Adapter->ioctl_fw_dnld_wait_queue,
+ Adapter->waiting_to_fw_download_done, timeout);
+ Adapter->fw_download_process_pid = INVALID_PID;
+ Adapter->fw_download_done = TRUE;
+ atomic_set(&Adapter->CurrNumFreeTxDesc, 0);
+ Adapter->CurrNumRecvDescs = 0;
+ Adapter->PrevNumRecvDescs = 0;
+ atomic_set(&Adapter->cntrlpktCnt, 0);
+ Adapter->LinkUpStatus = 0;
+ Adapter->LinkStatus = 0;
+
+ if (Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY) {
+ Adapter->DriverState = FW_DOWNLOAD_DONE;
+ wake_up(&Adapter->LEDInfo.notify_led_event);
}
- case IOCTL_DUMP_PACKET_INFO:
- DumpPackInfo(Adapter);
- DumpPhsRules(&Adapter->stBCMPhsContext);
- Status = STATUS_SUCCESS;
- break;
+ if (!timeout)
+ Status = -ENODEV;
- case IOCTL_GET_PACK_INFO:
- if (copy_to_user(argp, &Adapter->PackInfo, sizeof(struct bcm_packet_info)*NO_OF_QUEUES))
- return -EFAULT;
- Status = STATUS_SUCCESS;
- break;
+ up(&Adapter->fw_download_sema);
+ up(&Adapter->NVMRdmWrmLock);
+ return Status;
+}
- case IOCTL_BCM_SWITCH_TRANSFER_MODE: {
- UINT uiData = 0;
- if (copy_from_user(&uiData, argp, sizeof(UINT)))
- return -EFAULT;
+static int bcm_char_ioctl_chip_reset(struct bcm_mini_adapter *Adapter)
+{
+ INT Status;
+ INT NVMAccess;
- if (uiData) {
- /* Allow All Packets */
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_SWITCH_TRANSFER_MODE: ETH_PACKET_TUNNELING_MODE\n");
- Adapter->TransferMode = ETH_PACKET_TUNNELING_MODE;
- } else {
- /* Allow IP only Packets */
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_SWITCH_TRANSFER_MODE: IP_PACKET_ONLY_MODE\n");
- Adapter->TransferMode = IP_PACKET_ONLY_MODE;
- }
- Status = STATUS_SUCCESS;
- break;
+ NVMAccess = down_trylock(&Adapter->NVMRdmWrmLock);
+ if (NVMAccess) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, " IOCTL_BCM_CHIP_RESET not allowed as EEPROM Read/Write is in progress\n");
+ return -EACCES;
}
- case IOCTL_BCM_GET_DRIVER_VERSION: {
- ulong len;
-
- /* Copy Ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
+ down(&Adapter->RxAppControlQueuelock);
+ Status = reset_card_proc(Adapter);
+ flushAllAppQ();
+ up(&Adapter->RxAppControlQueuelock);
+ up(&Adapter->NVMRdmWrmLock);
+ ResetCounters(Adapter);
+ return Status;
+}
- len = min_t(ulong, IoBuffer.OutputLength, strlen(DRV_VERSION) + 1);
+static int bcm_char_ioctl_qos_threshold(ULONG arg, struct bcm_mini_adapter *Adapter)
+{
+ USHORT uiLoopIndex;
- if (copy_to_user(IoBuffer.OutputBuffer, DRV_VERSION, len))
+ for (uiLoopIndex = 0; uiLoopIndex < NO_OF_QUEUES; uiLoopIndex++) {
+ if (get_user(Adapter->PackInfo[uiLoopIndex].uiThreshold,
+ (unsigned long __user *)arg)) {
return -EFAULT;
- Status = STATUS_SUCCESS;
- break;
+ }
}
+ return 0;
+}
- case IOCTL_BCM_GET_CURRENT_STATUS: {
- struct bcm_link_state link_state;
+static int bcm_char_ioctl_switch_transfer_mode(void __user *argp, struct bcm_mini_adapter *Adapter)
+{
+ UINT uiData = 0;
- /* Copy Ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "copy_from_user failed..\n");
- return -EFAULT;
- }
+ if (copy_from_user(&uiData, argp, sizeof(UINT)))
+ return -EFAULT;
- if (IoBuffer.OutputLength != sizeof(link_state)) {
- Status = -EINVAL;
- break;
- }
+ if (uiData) {
+ /* Allow All Packets */
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_SWITCH_TRANSFER_MODE: ETH_PACKET_TUNNELING_MODE\n");
+ Adapter->TransferMode = ETH_PACKET_TUNNELING_MODE;
+ } else {
+ /* Allow IP only Packets */
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_SWITCH_TRANSFER_MODE: IP_PACKET_ONLY_MODE\n");
+ Adapter->TransferMode = IP_PACKET_ONLY_MODE;
+ }
+ return STATUS_SUCCESS;
+}
- memset(&link_state, 0, sizeof(link_state));
- link_state.bIdleMode = Adapter->IdleMode;
- link_state.bShutdownMode = Adapter->bShutStatus;
- link_state.ucLinkStatus = Adapter->LinkStatus;
+static int bcm_char_ioctl_get_driver_version(void __user *argp)
+{
+ struct bcm_ioctl_buffer IoBuffer;
+ ulong len;
- if (copy_to_user(IoBuffer.OutputBuffer, &link_state, min_t(size_t, sizeof(link_state), IoBuffer.OutputLength))) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy_to_user Failed..\n");
- return -EFAULT;
- }
- Status = STATUS_SUCCESS;
- break;
- }
+ /* Copy Ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
+ return -EFAULT;
- case IOCTL_BCM_SET_MAC_TRACING: {
- UINT tracing_flag;
+ len = min_t(ulong, IoBuffer.OutputLength, strlen(DRV_VERSION) + 1);
- /* copy ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
+ if (copy_to_user(IoBuffer.OutputBuffer, DRV_VERSION, len))
+ return -EFAULT;
- if (copy_from_user(&tracing_flag, IoBuffer.InputBuffer, sizeof(UINT)))
- return -EFAULT;
+ return STATUS_SUCCESS;
+}
- if (tracing_flag)
- Adapter->pTarangs->MacTracingEnabled = TRUE;
- else
- Adapter->pTarangs->MacTracingEnabled = false;
- break;
- }
+static int bcm_char_ioctl_get_current_status(void __user *argp, struct bcm_mini_adapter *Adapter)
+{
+ struct bcm_link_state link_state;
+ struct bcm_ioctl_buffer IoBuffer;
- case IOCTL_BCM_GET_DSX_INDICATION: {
- ULONG ulSFId = 0;
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
+ /* Copy Ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "copy_from_user failed..\n");
+ return -EFAULT;
+ }
- if (IoBuffer.OutputLength < sizeof(struct bcm_add_indication_alt)) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
- "Mismatch req: %lx needed is =0x%zx!!!",
- IoBuffer.OutputLength, sizeof(struct bcm_add_indication_alt));
- return -EINVAL;
- }
+ if (IoBuffer.OutputLength != sizeof(link_state))
+ return -EINVAL;
- if (copy_from_user(&ulSFId, IoBuffer.InputBuffer, sizeof(ulSFId)))
- return -EFAULT;
+ memset(&link_state, 0, sizeof(link_state));
+ link_state.bIdleMode = Adapter->IdleMode;
+ link_state.bShutdownMode = Adapter->bShutStatus;
+ link_state.ucLinkStatus = Adapter->LinkStatus;
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Get DSX Data SF ID is =%lx\n", ulSFId);
- get_dsx_sf_data_to_application(Adapter, ulSFId, IoBuffer.OutputBuffer);
- Status = STATUS_SUCCESS;
+ if (copy_to_user(IoBuffer.OutputBuffer, &link_state, min_t(size_t, sizeof(link_state), IoBuffer.OutputLength))) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy_to_user Failed..\n");
+ return -EFAULT;
}
- break;
+ return STATUS_SUCCESS;
+}
- case IOCTL_BCM_GET_HOST_MIBS: {
- PVOID temp_buff;
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
+static int bcm_char_ioctl_set_mac_tracing(void __user *argp, struct bcm_mini_adapter *Adapter)
+{
+ struct bcm_ioctl_buffer IoBuffer;
+ UINT tracing_flag;
- if (IoBuffer.OutputLength != sizeof(struct bcm_host_stats_mibs)) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
- "Length Check failed %lu %zd\n",
- IoBuffer.OutputLength, sizeof(struct bcm_host_stats_mibs));
- return -EINVAL;
- }
+ /* copy ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
+ return -EFAULT;
- /* FIXME: HOST_STATS are too big for kmalloc (122048)! */
- temp_buff = kzalloc(sizeof(struct bcm_host_stats_mibs), GFP_KERNEL);
- if (!temp_buff)
- return STATUS_FAILURE;
+ if (copy_from_user(&tracing_flag, IoBuffer.InputBuffer, sizeof(UINT)))
+ return -EFAULT;
- Status = ProcessGetHostMibs(Adapter, temp_buff);
- GetDroppedAppCntrlPktMibs(temp_buff, pTarang);
+ if (tracing_flag)
+ Adapter->pTarangs->MacTracingEnabled = TRUE;
+ else
+ Adapter->pTarangs->MacTracingEnabled = false;
- if (Status != STATUS_FAILURE)
- if (copy_to_user(IoBuffer.OutputBuffer, temp_buff, sizeof(struct bcm_host_stats_mibs))) {
- kfree(temp_buff);
- return -EFAULT;
- }
+ return STATUS_SUCCESS;
+}
- kfree(temp_buff);
- break;
- }
+static int bcm_char_ioctl_get_dsx_indication(void __user *argp, struct bcm_mini_adapter *Adapter)
+{
+ struct bcm_ioctl_buffer IoBuffer;
+ ULONG ulSFId = 0;
- case IOCTL_BCM_WAKE_UP_DEVICE_FROM_IDLE:
- if ((false == Adapter->bTriedToWakeUpFromlowPowerMode) && (TRUE == Adapter->IdleMode)) {
- Adapter->usIdleModePattern = ABORT_IDLE_MODE;
- Adapter->bWakeUpDevice = TRUE;
- wake_up(&Adapter->process_rx_cntrlpkt);
- }
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
+ return -EFAULT;
- Status = STATUS_SUCCESS;
- break;
+ if (IoBuffer.OutputLength < sizeof(struct bcm_add_indication_alt)) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "Mismatch req: %lx needed is =0x%zx!!!",
+ IoBuffer.OutputLength, sizeof(struct bcm_add_indication_alt));
+ return -EINVAL;
+ }
- case IOCTL_BCM_BULK_WRM: {
- struct bcm_bulk_wrm_buffer *pBulkBuffer;
- UINT uiTempVar = 0;
- PCHAR pvBuffer = NULL;
+ if (copy_from_user(&ulSFId, IoBuffer.InputBuffer, sizeof(ulSFId)))
+ return -EFAULT;
- if ((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus == TRUE) ||
- (Adapter->bPreparingForLowPowerMode == TRUE)) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Get DSX Data SF ID is =%lx\n", ulSFId);
+ get_dsx_sf_data_to_application(Adapter, ulSFId, IoBuffer.OutputBuffer);
+ return STATUS_SUCCESS;
+}
- BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "Device in Idle/Shutdown Mode, Blocking Wrms\n");
- Status = -EACCES;
- break;
- }
+static int bcm_char_ioctl_get_host_mibs(void __user *argp, struct bcm_mini_adapter *Adapter, struct bcm_tarang_data *pTarang)
+{
+ struct bcm_ioctl_buffer IoBuffer;
+ INT Status = STATUS_FAILURE;
+ PVOID temp_buff;
- /* Copy Ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
+ return -EFAULT;
- if (IoBuffer.InputLength < sizeof(ULONG) * 2)
- return -EINVAL;
+ if (IoBuffer.OutputLength != sizeof(struct bcm_host_stats_mibs)) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "Length Check failed %lu %zd\n",
+ IoBuffer.OutputLength, sizeof(struct bcm_host_stats_mibs));
+ return -EINVAL;
+ }
- pvBuffer = memdup_user(IoBuffer.InputBuffer,
- IoBuffer.InputLength);
- if (IS_ERR(pvBuffer))
- return PTR_ERR(pvBuffer);
+ /* FIXME: HOST_STATS are too big for kmalloc (122048)! */
+ temp_buff = kzalloc(sizeof(struct bcm_host_stats_mibs), GFP_KERNEL);
+ if (!temp_buff)
+ return STATUS_FAILURE;
- pBulkBuffer = (struct bcm_bulk_wrm_buffer *)pvBuffer;
+ Status = ProcessGetHostMibs(Adapter, temp_buff);
+ GetDroppedAppCntrlPktMibs(temp_buff, pTarang);
- if (((ULONG)pBulkBuffer->Register & 0x0F000000) != 0x0F000000 ||
- ((ULONG)pBulkBuffer->Register & 0x3)) {
- BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM Done On invalid Address : %x Access Denied.\n", (int)pBulkBuffer->Register);
- kfree(pvBuffer);
- Status = -EINVAL;
- break;
+ if (Status != STATUS_FAILURE) {
+ if (copy_to_user(IoBuffer.OutputBuffer, temp_buff, sizeof(struct bcm_host_stats_mibs))) {
+ kfree(temp_buff);
+ return -EFAULT;
}
+ }
- uiTempVar = pBulkBuffer->Register & EEPROM_REJECT_MASK;
- if (!((Adapter->pstargetparams->m_u32Customize)&VSG_MODE) &&
- ((uiTempVar == EEPROM_REJECT_REG_1) ||
- (uiTempVar == EEPROM_REJECT_REG_2) ||
- (uiTempVar == EEPROM_REJECT_REG_3) ||
- (uiTempVar == EEPROM_REJECT_REG_4)) &&
- (cmd == IOCTL_BCM_REGISTER_WRITE)) {
-
- kfree(pvBuffer);
- BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "EEPROM Access Denied, not in VSG Mode\n");
- Status = -EFAULT;
- break;
- }
+ kfree(temp_buff);
+ return Status;
+}
- if (pBulkBuffer->SwapEndian == false)
- Status = wrmWithLock(Adapter, (UINT)pBulkBuffer->Register, (PCHAR)pBulkBuffer->Values, IoBuffer.InputLength - 2*sizeof(ULONG));
- else
- Status = wrmaltWithLock(Adapter, (UINT)pBulkBuffer->Register, (PUINT)pBulkBuffer->Values, IoBuffer.InputLength - 2*sizeof(ULONG));
+static int bcm_char_ioctl_bulk_wrm(void __user *argp, struct bcm_mini_adapter *Adapter, UINT cmd)
+{
+ struct bcm_bulk_wrm_buffer *pBulkBuffer;
+ struct bcm_ioctl_buffer IoBuffer;
+ UINT uiTempVar = 0;
+ INT Status = STATUS_FAILURE;
+ PCHAR pvBuffer = NULL;
- if (Status != STATUS_SUCCESS)
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM Failed\n");
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
- kfree(pvBuffer);
- break;
+ BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "Device in Idle/Shutdown Mode, Blocking Wrms\n");
+ return -EACCES;
}
- case IOCTL_BCM_GET_NVM_SIZE:
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
+ /* Copy Ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
+ return -EFAULT;
- if (Adapter->eNVMType == NVM_EEPROM || Adapter->eNVMType == NVM_FLASH) {
- if (copy_to_user(IoBuffer.OutputBuffer, &Adapter->uiNVMDSDSize, sizeof(UINT)))
- return -EFAULT;
- }
+ if (IoBuffer.InputLength < sizeof(ULONG) * 2)
+ return -EINVAL;
- Status = STATUS_SUCCESS;
- break;
+ pvBuffer = memdup_user(IoBuffer.InputBuffer,
+ IoBuffer.InputLength);
+ if (IS_ERR(pvBuffer))
+ return PTR_ERR(pvBuffer);
- case IOCTL_BCM_CAL_INIT: {
- UINT uiSectorSize = 0;
- if (Adapter->eNVMType == NVM_FLASH) {
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
+ pBulkBuffer = (struct bcm_bulk_wrm_buffer *)pvBuffer;
- if (copy_from_user(&uiSectorSize, IoBuffer.InputBuffer, sizeof(UINT)))
- return -EFAULT;
+ if (((ULONG)pBulkBuffer->Register & 0x0F000000) != 0x0F000000 ||
+ ((ULONG)pBulkBuffer->Register & 0x3)) {
+ BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM Done On invalid Address : %x Access Denied.\n", (int)pBulkBuffer->Register);
+ kfree(pvBuffer);
+ return -EINVAL;
+ }
- if ((uiSectorSize < MIN_SECTOR_SIZE) || (uiSectorSize > MAX_SECTOR_SIZE)) {
- if (copy_to_user(IoBuffer.OutputBuffer, &Adapter->uiSectorSize,
- sizeof(UINT)))
- return -EFAULT;
- } else {
- if (IsFlash2x(Adapter)) {
- if (copy_to_user(IoBuffer.OutputBuffer, &Adapter->uiSectorSize, sizeof(UINT)))
- return -EFAULT;
- } else {
- if ((TRUE == Adapter->bShutStatus) || (TRUE == Adapter->IdleMode)) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Device is in Idle/Shutdown Mode\n");
- return -EACCES;
- }
-
- Adapter->uiSectorSize = uiSectorSize;
- BcmUpdateSectorSize(Adapter, Adapter->uiSectorSize);
- }
- }
- Status = STATUS_SUCCESS;
- } else {
- Status = STATUS_FAILURE;
- }
+ uiTempVar = pBulkBuffer->Register & EEPROM_REJECT_MASK;
+ if (!((Adapter->pstargetparams->m_u32Customize)&VSG_MODE) &&
+ ((uiTempVar == EEPROM_REJECT_REG_1) ||
+ (uiTempVar == EEPROM_REJECT_REG_2) ||
+ (uiTempVar == EEPROM_REJECT_REG_3) ||
+ (uiTempVar == EEPROM_REJECT_REG_4)) &&
+ (cmd == IOCTL_BCM_REGISTER_WRITE)) {
+
+ kfree(pvBuffer);
+ BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "EEPROM Access Denied, not in VSG Mode\n");
+ return -EFAULT;
}
- break;
- case IOCTL_BCM_SET_DEBUG:
-#ifdef DEBUG
- {
- struct bcm_user_debug_state sUserDebugState;
+ if (pBulkBuffer->SwapEndian == false)
+ Status = wrmWithLock(Adapter, (UINT)pBulkBuffer->Register, (PCHAR)pBulkBuffer->Values, IoBuffer.InputLength - 2*sizeof(ULONG));
+ else
+ Status = wrmaltWithLock(Adapter, (UINT)pBulkBuffer->Register, (PUINT)pBulkBuffer->Values, IoBuffer.InputLength - 2*sizeof(ULONG));
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "In SET_DEBUG ioctl\n");
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
+ if (Status != STATUS_SUCCESS)
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM Failed\n");
- if (copy_from_user(&sUserDebugState, IoBuffer.InputBuffer, sizeof(struct bcm_user_debug_state)))
- return -EFAULT;
+ kfree(pvBuffer);
+ return Status;
+}
- BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "IOCTL_BCM_SET_DEBUG: OnOff=%d Type = 0x%x ",
- sUserDebugState.OnOff, sUserDebugState.Type);
- /* sUserDebugState.Subtype <<= 1; */
- sUserDebugState.Subtype = 1 << sUserDebugState.Subtype;
- BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "actual Subtype=0x%x\n", sUserDebugState.Subtype);
-
- /* Update new 'DebugState' in the Adapter */
- Adapter->stDebugState.type |= sUserDebugState.Type;
- /* Subtype: A bitmap of 32 bits for Subtype per Type.
- * Valid indexes in 'subtype' array: 1,2,4,8
- * corresponding to valid Type values. Hence we can use the 'Type' field
- * as the index value, ignoring the array entries 0,3,5,6,7 !
- */
- if (sUserDebugState.OnOff)
- Adapter->stDebugState.subtype[sUserDebugState.Type] |= sUserDebugState.Subtype;
- else
- Adapter->stDebugState.subtype[sUserDebugState.Type] &= ~sUserDebugState.Subtype;
+static int bcm_char_ioctl_get_nvm_size(void __user *argp, struct bcm_mini_adapter *Adapter)
+{
+ struct bcm_ioctl_buffer IoBuffer;
- BCM_SHOW_DEBUG_BITMAP(Adapter);
- }
-#endif
- break;
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
+ return -EFAULT;
- case IOCTL_BCM_NVM_READ:
- case IOCTL_BCM_NVM_WRITE: {
- struct bcm_nvm_readwrite stNVMReadWrite;
- PUCHAR pReadData = NULL;
- ULONG ulDSDMagicNumInUsrBuff = 0;
- struct timeval tv0, tv1;
- memset(&tv0, 0, sizeof(struct timeval));
- memset(&tv1, 0, sizeof(struct timeval));
- if ((Adapter->eNVMType == NVM_FLASH) && (Adapter->uiFlashLayoutMajorVersion == 0)) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "The Flash Control Section is Corrupted. Hence Rejection on NVM Read/Write\n");
+ if (Adapter->eNVMType == NVM_EEPROM || Adapter->eNVMType == NVM_FLASH) {
+ if (copy_to_user(IoBuffer.OutputBuffer, &Adapter->uiNVMDSDSize, sizeof(UINT)))
return -EFAULT;
- }
+ }
- if (IsFlash2x(Adapter)) {
- if ((Adapter->eActiveDSD != DSD0) &&
- (Adapter->eActiveDSD != DSD1) &&
- (Adapter->eActiveDSD != DSD2)) {
+ return STATUS_SUCCESS;
+}
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "No DSD is active..hence NVM Command is blocked");
- return STATUS_FAILURE;
- }
- }
+static int bcm_char_ioctl_cal_init(void __user *argp, struct bcm_mini_adapter *Adapter)
+{
+ struct bcm_ioctl_buffer IoBuffer;
+ UINT uiSectorSize = 0;
+ INT Status = STATUS_FAILURE;
- /* Copy Ioctl Buffer structure */
+ if (Adapter->eNVMType == NVM_FLASH) {
if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
return -EFAULT;
- if (copy_from_user(&stNVMReadWrite,
- (IOCTL_BCM_NVM_READ == cmd) ? IoBuffer.OutputBuffer : IoBuffer.InputBuffer,
- sizeof(struct bcm_nvm_readwrite)))
+ if (copy_from_user(&uiSectorSize, IoBuffer.InputBuffer, sizeof(UINT)))
return -EFAULT;
- /*
- * Deny the access if the offset crosses the cal area limit.
- */
- if (stNVMReadWrite.uiNumBytes > Adapter->uiNVMDSDSize)
- return STATUS_FAILURE;
-
- if (stNVMReadWrite.uiOffset > Adapter->uiNVMDSDSize - stNVMReadWrite.uiNumBytes) {
- /* BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Can't allow access beyond NVM Size: 0x%x 0x%x\n", stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes); */
- return STATUS_FAILURE;
- }
-
- pReadData = memdup_user(stNVMReadWrite.pBuffer,
- stNVMReadWrite.uiNumBytes);
- if (IS_ERR(pReadData))
- return PTR_ERR(pReadData);
-
- do_gettimeofday(&tv0);
- if (IOCTL_BCM_NVM_READ == cmd) {
- down(&Adapter->NVMRdmWrmLock);
-
- if ((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus == TRUE) ||
- (Adapter->bPreparingForLowPowerMode == TRUE)) {
-
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n");
- up(&Adapter->NVMRdmWrmLock);
- kfree(pReadData);
- return -EACCES;
- }
-
- Status = BeceemNVMRead(Adapter, (PUINT)pReadData, stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes);
- up(&Adapter->NVMRdmWrmLock);
-
- if (Status != STATUS_SUCCESS) {
- kfree(pReadData);
- return Status;
- }
-
- if (copy_to_user(stNVMReadWrite.pBuffer, pReadData, stNVMReadWrite.uiNumBytes)) {
- kfree(pReadData);
+ if ((uiSectorSize < MIN_SECTOR_SIZE) || (uiSectorSize > MAX_SECTOR_SIZE)) {
+ if (copy_to_user(IoBuffer.OutputBuffer, &Adapter->uiSectorSize,
+ sizeof(UINT)))
return -EFAULT;
- }
} else {
- down(&Adapter->NVMRdmWrmLock);
-
- if ((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus == TRUE) ||
- (Adapter->bPreparingForLowPowerMode == TRUE)) {
-
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n");
- up(&Adapter->NVMRdmWrmLock);
- kfree(pReadData);
- return -EACCES;
- }
-
- Adapter->bHeaderChangeAllowed = TRUE;
if (IsFlash2x(Adapter)) {
- /*
- * New Requirement:-
- * DSD section updation will be allowed in two case:-
- * 1. if DSD sig is present in DSD header means dongle is ok and updation is fruitfull
- * 2. if point 1 failes then user buff should have DSD sig. this point ensures that if dongle is
- * corrupted then user space program first modify the DSD header with valid DSD sig so
- * that this as well as further write may be worthwhile.
- *
- * This restriction has been put assuming that if DSD sig is corrupted, DSD
- * data won't be considered valid.
- */
-
- Status = BcmFlash2xCorruptSig(Adapter, Adapter->eActiveDSD);
- if (Status != STATUS_SUCCESS) {
- if (((stNVMReadWrite.uiOffset + stNVMReadWrite.uiNumBytes) != Adapter->uiNVMDSDSize) ||
- (stNVMReadWrite.uiNumBytes < SIGNATURE_SIZE)) {
-
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "DSD Sig is present neither in Flash nor User provided Input..");
- up(&Adapter->NVMRdmWrmLock);
- kfree(pReadData);
- return Status;
- }
-
- ulDSDMagicNumInUsrBuff = ntohl(*(PUINT)(pReadData + stNVMReadWrite.uiNumBytes - SIGNATURE_SIZE));
- if (ulDSDMagicNumInUsrBuff != DSD_IMAGE_MAGIC_NUMBER) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "DSD Sig is present neither in Flash nor User provided Input..");
- up(&Adapter->NVMRdmWrmLock);
- kfree(pReadData);
- return Status;
- }
+ if (copy_to_user(IoBuffer.OutputBuffer, &Adapter->uiSectorSize, sizeof(UINT)))
+ return -EFAULT;
+ } else {
+ if ((TRUE == Adapter->bShutStatus) || (TRUE == Adapter->IdleMode)) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Device is in Idle/Shutdown Mode\n");
+ return -EACCES;
}
+
+ Adapter->uiSectorSize = uiSectorSize;
+ BcmUpdateSectorSize(Adapter, Adapter->uiSectorSize);
}
+ }
+ Status = STATUS_SUCCESS;
+ } else {
+ Status = STATUS_FAILURE;
+ }
+ return Status;
+}
- Status = BeceemNVMWrite(Adapter, (PUINT)pReadData, stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes, stNVMReadWrite.bVerify);
- if (IsFlash2x(Adapter))
- BcmFlash2xWriteSig(Adapter, Adapter->eActiveDSD);
+static int bcm_char_ioctl_set_debug(void __user *argp, struct bcm_mini_adapter *Adapter)
+{
+#ifdef DEBUG
+ struct bcm_ioctl_buffer IoBuffer;
+ struct bcm_user_debug_state sUserDebugState;
- Adapter->bHeaderChangeAllowed = false;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "In SET_DEBUG ioctl\n");
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
+ return -EFAULT;
- up(&Adapter->NVMRdmWrmLock);
+ if (copy_from_user(&sUserDebugState, IoBuffer.InputBuffer, sizeof(struct bcm_user_debug_state)))
+ return -EFAULT;
- if (Status != STATUS_SUCCESS) {
- kfree(pReadData);
- return Status;
- }
- }
+ BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "IOCTL_BCM_SET_DEBUG: OnOff=%d Type = 0x%x ",
+ sUserDebugState.OnOff, sUserDebugState.Type);
+ /* sUserDebugState.Subtype <<= 1; */
+ sUserDebugState.Subtype = 1 << sUserDebugState.Subtype;
+ BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "actual Subtype=0x%x\n", sUserDebugState.Subtype);
+
+ /* Update new 'DebugState' in the Adapter */
+ Adapter->stDebugState.type |= sUserDebugState.Type;
+ /* Subtype: A bitmap of 32 bits for Subtype per Type.
+ * Valid indexes in 'subtype' array: 1,2,4,8
+ * corresponding to valid Type values. Hence we can use the 'Type' field
+ * as the index value, ignoring the array entries 0,3,5,6,7 !
+ */
+ if (sUserDebugState.OnOff)
+ Adapter->stDebugState.subtype[sUserDebugState.Type] |= sUserDebugState.Subtype;
+ else
+ Adapter->stDebugState.subtype[sUserDebugState.Type] &= ~sUserDebugState.Subtype;
+
+ BCM_SHOW_DEBUG_BITMAP(Adapter);
+#endif
+ return STATUS_SUCCESS;
+}
- do_gettimeofday(&tv1);
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, " timetaken by Write/read :%ld msec\n", (tv1.tv_sec - tv0.tv_sec)*1000 + (tv1.tv_usec - tv0.tv_usec)/1000);
+static int bcm_char_ioctl_nvm_rw(void __user *argp, struct bcm_mini_adapter *Adapter, UINT cmd)
+{
+ struct bcm_nvm_readwrite stNVMReadWrite;
+ struct timeval tv0, tv1;
+ struct bcm_ioctl_buffer IoBuffer;
+ PUCHAR pReadData = NULL;
+ ULONG ulDSDMagicNumInUsrBuff = 0;
+ INT Status = STATUS_FAILURE;
- kfree(pReadData);
- return STATUS_SUCCESS;
+ memset(&tv0, 0, sizeof(struct timeval));
+ memset(&tv1, 0, sizeof(struct timeval));
+ if ((Adapter->eNVMType == NVM_FLASH) && (Adapter->uiFlashLayoutMajorVersion == 0)) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "The Flash Control Section is Corrupted. Hence Rejection on NVM Read/Write\n");
+ return -EFAULT;
}
- case IOCTL_BCM_FLASH2X_SECTION_READ: {
- struct bcm_flash2x_readwrite sFlash2xRead = {0};
- PUCHAR pReadBuff = NULL;
- UINT NOB = 0;
- UINT BuffSize = 0;
- UINT ReadBytes = 0;
- UINT ReadOffset = 0;
- void __user *OutPutBuff;
+ if (IsFlash2x(Adapter)) {
+ if ((Adapter->eActiveDSD != DSD0) &&
+ (Adapter->eActiveDSD != DSD1) &&
+ (Adapter->eActiveDSD != DSD2)) {
- if (IsFlash2x(Adapter) != TRUE) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash Does not have 2.x map");
- return -EINVAL;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "No DSD is active..hence NVM Command is blocked");
+ return STATUS_FAILURE;
}
+ }
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_FLASH2X_SECTION_READ Called");
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
-
- /* Reading FLASH 2.x READ structure */
- if (copy_from_user(&sFlash2xRead, IoBuffer.InputBuffer, sizeof(struct bcm_flash2x_readwrite)))
- return -EFAULT;
+ /* Copy Ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
+ return -EFAULT;
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.Section :%x", sFlash2xRead.Section);
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.offset :%x", sFlash2xRead.offset);
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.numOfBytes :%x", sFlash2xRead.numOfBytes);
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.bVerify :%x\n", sFlash2xRead.bVerify);
+ if (copy_from_user(&stNVMReadWrite,
+ (IOCTL_BCM_NVM_READ == cmd) ? IoBuffer.OutputBuffer : IoBuffer.InputBuffer,
+ sizeof(struct bcm_nvm_readwrite)))
+ return -EFAULT;
- /* This was internal to driver for raw read. now it has ben exposed to user space app. */
- if (validateFlash2xReadWrite(Adapter, &sFlash2xRead) == false)
- return STATUS_FAILURE;
+ /*
+ * Deny the access if the offset crosses the cal area limit.
+ */
+ if (stNVMReadWrite.uiNumBytes > Adapter->uiNVMDSDSize)
+ return STATUS_FAILURE;
- NOB = sFlash2xRead.numOfBytes;
- if (NOB > Adapter->uiSectorSize)
- BuffSize = Adapter->uiSectorSize;
- else
- BuffSize = NOB;
+ if (stNVMReadWrite.uiOffset > Adapter->uiNVMDSDSize - stNVMReadWrite.uiNumBytes) {
+ /* BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Can't allow access beyond NVM Size: 0x%x 0x%x\n", stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes); */
+ return STATUS_FAILURE;
+ }
- ReadOffset = sFlash2xRead.offset;
- OutPutBuff = IoBuffer.OutputBuffer;
- pReadBuff = (PCHAR)kzalloc(BuffSize , GFP_KERNEL);
+ pReadData = memdup_user(stNVMReadWrite.pBuffer,
+ stNVMReadWrite.uiNumBytes);
+ if (IS_ERR(pReadData))
+ return PTR_ERR(pReadData);
- if (pReadBuff == NULL) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Memory allocation failed for Flash 2.x Read Structure");
- return -ENOMEM;
- }
+ do_gettimeofday(&tv0);
+ if (IOCTL_BCM_NVM_READ == cmd) {
down(&Adapter->NVMRdmWrmLock);
if ((Adapter->IdleMode == TRUE) ||
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n");
up(&Adapter->NVMRdmWrmLock);
- kfree(pReadBuff);
+ kfree(pReadData);
return -EACCES;
}
- while (NOB) {
- if (NOB > Adapter->uiSectorSize)
- ReadBytes = Adapter->uiSectorSize;
- else
- ReadBytes = NOB;
+ Status = BeceemNVMRead(Adapter, (PUINT)pReadData, stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes);
+ up(&Adapter->NVMRdmWrmLock);
- /* Reading the data from Flash 2.x */
- Status = BcmFlash2xBulkRead(Adapter, (PUINT)pReadBuff, sFlash2xRead.Section, ReadOffset, ReadBytes);
- if (Status) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Flash 2x read err with Status :%d", Status);
- break;
- }
+ if (Status != STATUS_SUCCESS) {
+ kfree(pReadData);
+ return Status;
+ }
- BCM_DEBUG_PRINT_BUFFER(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, pReadBuff, ReadBytes);
+ if (copy_to_user(stNVMReadWrite.pBuffer, pReadData, stNVMReadWrite.uiNumBytes)) {
+ kfree(pReadData);
+ return -EFAULT;
+ }
+ } else {
+ down(&Adapter->NVMRdmWrmLock);
- Status = copy_to_user(OutPutBuff, pReadBuff, ReadBytes);
- if (Status) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Copy to use failed with status :%d", Status);
- up(&Adapter->NVMRdmWrmLock);
- kfree(pReadBuff);
- return -EFAULT;
- }
- NOB = NOB - ReadBytes;
- if (NOB) {
- ReadOffset = ReadOffset + ReadBytes;
- OutPutBuff = OutPutBuff + ReadBytes;
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n");
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pReadData);
+ return -EACCES;
+ }
+
+ Adapter->bHeaderChangeAllowed = TRUE;
+ if (IsFlash2x(Adapter)) {
+ /*
+ * New Requirement:-
+ * DSD section updation will be allowed in two case:-
+ * 1. if DSD sig is present in DSD header means dongle is ok and updation is fruitfull
+ * 2. if point 1 failes then user buff should have DSD sig. this point ensures that if dongle is
+ * corrupted then user space program first modify the DSD header with valid DSD sig so
+ * that this as well as further write may be worthwhile.
+ *
+ * This restriction has been put assuming that if DSD sig is corrupted, DSD
+ * data won't be considered valid.
+ */
+
+ Status = BcmFlash2xCorruptSig(Adapter, Adapter->eActiveDSD);
+ if (Status != STATUS_SUCCESS) {
+ if (((stNVMReadWrite.uiOffset + stNVMReadWrite.uiNumBytes) != Adapter->uiNVMDSDSize) ||
+ (stNVMReadWrite.uiNumBytes < SIGNATURE_SIZE)) {
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "DSD Sig is present neither in Flash nor User provided Input..");
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pReadData);
+ return Status;
+ }
+
+ ulDSDMagicNumInUsrBuff = ntohl(*(PUINT)(pReadData + stNVMReadWrite.uiNumBytes - SIGNATURE_SIZE));
+ if (ulDSDMagicNumInUsrBuff != DSD_IMAGE_MAGIC_NUMBER) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "DSD Sig is present neither in Flash nor User provided Input..");
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pReadData);
+ return Status;
+ }
}
}
+ Status = BeceemNVMWrite(Adapter, (PUINT)pReadData, stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes, stNVMReadWrite.bVerify);
+ if (IsFlash2x(Adapter))
+ BcmFlash2xWriteSig(Adapter, Adapter->eActiveDSD);
+
+ Adapter->bHeaderChangeAllowed = false;
+
up(&Adapter->NVMRdmWrmLock);
- kfree(pReadBuff);
+
+ if (Status != STATUS_SUCCESS) {
+ kfree(pReadData);
+ return Status;
+ }
}
- break;
- case IOCTL_BCM_FLASH2X_SECTION_WRITE: {
- struct bcm_flash2x_readwrite sFlash2xWrite = {0};
- PUCHAR pWriteBuff;
- void __user *InputAddr;
- UINT NOB = 0;
- UINT BuffSize = 0;
- UINT WriteOffset = 0;
- UINT WriteBytes = 0;
+ do_gettimeofday(&tv1);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, " timetaken by Write/read :%ld msec\n", (tv1.tv_sec - tv0.tv_sec)*1000 + (tv1.tv_usec - tv0.tv_usec)/1000);
- if (IsFlash2x(Adapter) != TRUE) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash Does not have 2.x map");
- return -EINVAL;
- }
+ kfree(pReadData);
+ return STATUS_SUCCESS;
+}
- /* First make this False so that we can enable the Sector Permission Check in BeceemFlashBulkWrite */
- Adapter->bAllDSDWriteAllow = false;
+static int bcm_char_ioctl_flash2x_section_read(void __user *argp, struct bcm_mini_adapter *Adapter)
+{
+ struct bcm_flash2x_readwrite sFlash2xRead = {0};
+ struct bcm_ioctl_buffer IoBuffer;
+ PUCHAR pReadBuff = NULL;
+ UINT NOB = 0;
+ UINT BuffSize = 0;
+ UINT ReadBytes = 0;
+ UINT ReadOffset = 0;
+ INT Status = STATUS_FAILURE;
+ void __user *OutPutBuff;
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_FLASH2X_SECTION_WRITE Called");
+ if (IsFlash2x(Adapter) != TRUE) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash Does not have 2.x map");
+ return -EINVAL;
+ }
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_FLASH2X_SECTION_READ Called");
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
+ return -EFAULT;
- /* Reading FLASH 2.x READ structure */
- if (copy_from_user(&sFlash2xWrite, IoBuffer.InputBuffer, sizeof(struct bcm_flash2x_readwrite)))
- return -EFAULT;
+ /* Reading FLASH 2.x READ structure */
+ if (copy_from_user(&sFlash2xRead, IoBuffer.InputBuffer, sizeof(struct bcm_flash2x_readwrite)))
+ return -EFAULT;
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.Section :%x", sFlash2xWrite.Section);
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.offset :%d", sFlash2xWrite.offset);
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.numOfBytes :%x", sFlash2xWrite.numOfBytes);
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.bVerify :%x\n", sFlash2xWrite.bVerify);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.Section :%x", sFlash2xRead.Section);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.offset :%x", sFlash2xRead.offset);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.numOfBytes :%x", sFlash2xRead.numOfBytes);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.bVerify :%x\n", sFlash2xRead.bVerify);
- if ((sFlash2xWrite.Section != VSA0) && (sFlash2xWrite.Section != VSA1) && (sFlash2xWrite.Section != VSA2)) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Only VSA write is allowed");
- return -EINVAL;
- }
+ /* This was internal to driver for raw read. now it has ben exposed to user space app. */
+ if (validateFlash2xReadWrite(Adapter, &sFlash2xRead) == false)
+ return STATUS_FAILURE;
- if (validateFlash2xReadWrite(Adapter, &sFlash2xWrite) == false)
- return STATUS_FAILURE;
+ NOB = sFlash2xRead.numOfBytes;
+ if (NOB > Adapter->uiSectorSize)
+ BuffSize = Adapter->uiSectorSize;
+ else
+ BuffSize = NOB;
+
+ ReadOffset = sFlash2xRead.offset;
+ OutPutBuff = IoBuffer.OutputBuffer;
+ pReadBuff = (PCHAR)kzalloc(BuffSize , GFP_KERNEL);
- InputAddr = sFlash2xWrite.pDataBuff;
- WriteOffset = sFlash2xWrite.offset;
- NOB = sFlash2xWrite.numOfBytes;
+ if (pReadBuff == NULL) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Memory allocation failed for Flash 2.x Read Structure");
+ return -ENOMEM;
+ }
+ down(&Adapter->NVMRdmWrmLock);
+
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n");
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pReadBuff);
+ return -EACCES;
+ }
+ while (NOB) {
if (NOB > Adapter->uiSectorSize)
- BuffSize = Adapter->uiSectorSize;
+ ReadBytes = Adapter->uiSectorSize;
else
- BuffSize = NOB;
+ ReadBytes = NOB;
- pWriteBuff = kmalloc(BuffSize, GFP_KERNEL);
+ /* Reading the data from Flash 2.x */
+ Status = BcmFlash2xBulkRead(Adapter, (PUINT)pReadBuff, sFlash2xRead.Section, ReadOffset, ReadBytes);
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Flash 2x read err with Status :%d", Status);
+ break;
+ }
- if (pWriteBuff == NULL)
- return -ENOMEM;
+ BCM_DEBUG_PRINT_BUFFER(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, pReadBuff, ReadBytes);
- /* extracting the remainder of the given offset. */
- WriteBytes = Adapter->uiSectorSize;
- if (WriteOffset % Adapter->uiSectorSize)
- WriteBytes = Adapter->uiSectorSize - (WriteOffset % Adapter->uiSectorSize);
+ Status = copy_to_user(OutPutBuff, pReadBuff, ReadBytes);
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Copy to use failed with status :%d", Status);
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pReadBuff);
+ return -EFAULT;
+ }
+ NOB = NOB - ReadBytes;
+ if (NOB) {
+ ReadOffset = ReadOffset + ReadBytes;
+ OutPutBuff = OutPutBuff + ReadBytes;
+ }
+ }
- if (NOB < WriteBytes)
- WriteBytes = NOB;
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pReadBuff);
+ return Status;
+}
- down(&Adapter->NVMRdmWrmLock);
+static int bcm_char_ioctl_flash2x_section_write(void __user *argp, struct bcm_mini_adapter *Adapter)
+{
+ struct bcm_flash2x_readwrite sFlash2xWrite = {0};
+ struct bcm_ioctl_buffer IoBuffer;
+ PUCHAR pWriteBuff;
+ void __user *InputAddr;
+ UINT NOB = 0;
+ UINT BuffSize = 0;
+ UINT WriteOffset = 0;
+ UINT WriteBytes = 0;
+ INT Status = STATUS_FAILURE;
- if ((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus == TRUE) ||
- (Adapter->bPreparingForLowPowerMode == TRUE)) {
+ if (IsFlash2x(Adapter) != TRUE) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash Does not have 2.x map");
+ return -EINVAL;
+ }
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n");
+ /* First make this False so that we can enable the Sector Permission Check in BeceemFlashBulkWrite */
+ Adapter->bAllDSDWriteAllow = false;
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_FLASH2X_SECTION_WRITE Called");
+
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
+ return -EFAULT;
+
+ /* Reading FLASH 2.x READ structure */
+ if (copy_from_user(&sFlash2xWrite, IoBuffer.InputBuffer, sizeof(struct bcm_flash2x_readwrite)))
+ return -EFAULT;
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.Section :%x", sFlash2xWrite.Section);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.offset :%d", sFlash2xWrite.offset);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.numOfBytes :%x", sFlash2xWrite.numOfBytes);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.bVerify :%x\n", sFlash2xWrite.bVerify);
+
+ if ((sFlash2xWrite.Section != VSA0) && (sFlash2xWrite.Section != VSA1) && (sFlash2xWrite.Section != VSA2)) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Only VSA write is allowed");
+ return -EINVAL;
+ }
+
+ if (validateFlash2xReadWrite(Adapter, &sFlash2xWrite) == false)
+ return STATUS_FAILURE;
+
+ InputAddr = sFlash2xWrite.pDataBuff;
+ WriteOffset = sFlash2xWrite.offset;
+ NOB = sFlash2xWrite.numOfBytes;
+
+ if (NOB > Adapter->uiSectorSize)
+ BuffSize = Adapter->uiSectorSize;
+ else
+ BuffSize = NOB;
+
+ pWriteBuff = kmalloc(BuffSize, GFP_KERNEL);
+
+ if (pWriteBuff == NULL)
+ return -ENOMEM;
+
+ /* extracting the remainder of the given offset. */
+ WriteBytes = Adapter->uiSectorSize;
+ if (WriteOffset % Adapter->uiSectorSize)
+ WriteBytes = Adapter->uiSectorSize - (WriteOffset % Adapter->uiSectorSize);
+
+ if (NOB < WriteBytes)
+ WriteBytes = NOB;
+
+ down(&Adapter->NVMRdmWrmLock);
+
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n");
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pWriteBuff);
+ return -EACCES;
+ }
+
+ BcmFlash2xCorruptSig(Adapter, sFlash2xWrite.Section);
+ do {
+ Status = copy_from_user(pWriteBuff, InputAddr, WriteBytes);
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy to user failed with status :%d", Status);
up(&Adapter->NVMRdmWrmLock);
kfree(pWriteBuff);
- return -EACCES;
+ return -EFAULT;
}
+ BCM_DEBUG_PRINT_BUFFER(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, pWriteBuff, WriteBytes);
- BcmFlash2xCorruptSig(Adapter, sFlash2xWrite.Section);
- do {
- Status = copy_from_user(pWriteBuff, InputAddr, WriteBytes);
- if (Status) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy to user failed with status :%d", Status);
- up(&Adapter->NVMRdmWrmLock);
- kfree(pWriteBuff);
- return -EFAULT;
- }
- BCM_DEBUG_PRINT_BUFFER(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, pWriteBuff, WriteBytes);
+ /* Writing the data from Flash 2.x */
+ Status = BcmFlash2xBulkWrite(Adapter, (PUINT)pWriteBuff, sFlash2xWrite.Section, WriteOffset, WriteBytes, sFlash2xWrite.bVerify);
- /* Writing the data from Flash 2.x */
- Status = BcmFlash2xBulkWrite(Adapter, (PUINT)pWriteBuff, sFlash2xWrite.Section, WriteOffset, WriteBytes, sFlash2xWrite.bVerify);
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash 2x read err with Status :%d", Status);
+ break;
+ }
- if (Status) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash 2x read err with Status :%d", Status);
- break;
- }
+ NOB = NOB - WriteBytes;
+ if (NOB) {
+ WriteOffset = WriteOffset + WriteBytes;
+ InputAddr = InputAddr + WriteBytes;
+ if (NOB > Adapter->uiSectorSize)
+ WriteBytes = Adapter->uiSectorSize;
+ else
+ WriteBytes = NOB;
+ }
+ } while (NOB > 0);
- NOB = NOB - WriteBytes;
- if (NOB) {
- WriteOffset = WriteOffset + WriteBytes;
- InputAddr = InputAddr + WriteBytes;
- if (NOB > Adapter->uiSectorSize)
- WriteBytes = Adapter->uiSectorSize;
- else
- WriteBytes = NOB;
- }
- } while (NOB > 0);
+ BcmFlash2xWriteSig(Adapter, sFlash2xWrite.Section);
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pWriteBuff);
+ return Status;
+}
- BcmFlash2xWriteSig(Adapter, sFlash2xWrite.Section);
- up(&Adapter->NVMRdmWrmLock);
- kfree(pWriteBuff);
+
+static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
+{
+ struct bcm_tarang_data *pTarang = filp->private_data;
+ void __user *argp = (void __user *)arg;
+ struct bcm_mini_adapter *Adapter = pTarang->Adapter;
+ INT Status = STATUS_FAILURE;
+ struct bcm_ioctl_buffer IoBuffer;
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+ "Parameters Passed to control IOCTL cmd=0x%X arg=0x%lX",
+ cmd, arg);
+
+ if (_IOC_TYPE(cmd) != BCM_IOCTL)
+ return -EFAULT;
+ if (_IOC_DIR(cmd) & _IOC_READ)
+ Status = !access_ok(VERIFY_WRITE, argp, _IOC_SIZE(cmd));
+ else if (_IOC_DIR(cmd) & _IOC_WRITE)
+ Status = !access_ok(VERIFY_READ, argp, _IOC_SIZE(cmd));
+ else if (_IOC_NONE == (_IOC_DIR(cmd) & _IOC_NONE))
+ Status = STATUS_SUCCESS;
+
+ if (Status)
+ return -EFAULT;
+
+ if (Adapter->device_removed)
+ return -EFAULT;
+
+ if (false == Adapter->fw_download_done) {
+ switch (cmd) {
+ case IOCTL_MAC_ADDR_REQ:
+ case IOCTL_LINK_REQ:
+ case IOCTL_CM_REQUEST:
+ case IOCTL_SS_INFO_REQ:
+ case IOCTL_SEND_CONTROL_MESSAGE:
+ case IOCTL_IDLE_REQ:
+ case IOCTL_BCM_GPIO_SET_REQUEST:
+ case IOCTL_BCM_GPIO_STATUS_REQUEST:
+ return -EACCES;
+ default:
+ break;
+ }
}
- break;
+
+ Status = vendorextnIoctl(Adapter, cmd, arg);
+ if (Status != CONTINUE_COMMON_PATH)
+ return Status;
+
+ switch (cmd) {
+ /* Rdms for Swin Idle... */
+ case IOCTL_BCM_REGISTER_READ_PRIVATE:
+ Status = bcm_char_ioctl_reg_read_private(argp, Adapter);
+ return Status;
+
+ case IOCTL_BCM_REGISTER_WRITE_PRIVATE:
+ Status = bcm_char_ioctl_reg_write_private(argp, Adapter);
+ return Status;
+
+ case IOCTL_BCM_REGISTER_READ:
+ case IOCTL_BCM_EEPROM_REGISTER_READ:
+ Status = bcm_char_ioctl_eeprom_reg_read(argp, Adapter);
+ return Status;
+
+ case IOCTL_BCM_REGISTER_WRITE:
+ case IOCTL_BCM_EEPROM_REGISTER_WRITE:
+ Status = bcm_char_ioctl_eeprom_reg_write(argp, Adapter, cmd);
+ return Status;
+
+ case IOCTL_BCM_GPIO_SET_REQUEST:
+ Status = bcm_char_ioctl_gpio_set_request(argp, Adapter);
+ return Status;
+
+ case BCM_LED_THREAD_STATE_CHANGE_REQ:
+ Status = bcm_char_ioctl_led_thread_state_change_req(argp, Adapter);
+ return Status;
+
+ case IOCTL_BCM_GPIO_STATUS_REQUEST:
+ Status = bcm_char_ioctl_gpio_status_request(argp, Adapter);
+ return Status;
+
+ case IOCTL_BCM_GPIO_MULTI_REQUEST:
+ Status = bcm_char_ioctl_gpio_multi_request(argp, Adapter);
+ return Status;
+
+ case IOCTL_BCM_GPIO_MODE_REQUEST:
+ Status = bcm_char_ioctl_gpio_mode_request(argp, Adapter);
+ return Status;
+
+ case IOCTL_MAC_ADDR_REQ:
+ case IOCTL_LINK_REQ:
+ case IOCTL_CM_REQUEST:
+ case IOCTL_SS_INFO_REQ:
+ case IOCTL_SEND_CONTROL_MESSAGE:
+ case IOCTL_IDLE_REQ:
+ Status = bcm_char_ioctl_misc_request(argp, Adapter);
+ return Status;
+
+ case IOCTL_BCM_BUFFER_DOWNLOAD_START:
+ Status = bcm_char_ioctl_buffer_download_start(Adapter);
+ return Status;
+
+ case IOCTL_BCM_BUFFER_DOWNLOAD:
+ Status = bcm_char_ioctl_buffer_download(argp, Adapter);
+ return Status;
+
+ case IOCTL_BCM_BUFFER_DOWNLOAD_STOP:
+ Status = bcm_char_ioctl_buffer_download_stop(argp, Adapter);
+ return Status;
+
+
+ case IOCTL_BE_BUCKET_SIZE:
+ Status = 0;
+ if (get_user(Adapter->BEBucketSize, (unsigned long __user *)arg))
+ Status = -EFAULT;
+ break;
+
+ case IOCTL_RTPS_BUCKET_SIZE:
+ Status = 0;
+ if (get_user(Adapter->rtPSBucketSize, (unsigned long __user *)arg))
+ Status = -EFAULT;
+ break;
+
+ case IOCTL_CHIP_RESET:
+ Status = bcm_char_ioctl_chip_reset(Adapter);
+ return Status;
+
+ case IOCTL_QOS_THRESHOLD:
+ Status = bcm_char_ioctl_qos_threshold(arg, Adapter);
+ return Status;
+
+ case IOCTL_DUMP_PACKET_INFO:
+ DumpPackInfo(Adapter);
+ DumpPhsRules(&Adapter->stBCMPhsContext);
+ Status = STATUS_SUCCESS;
+ break;
+
+ case IOCTL_GET_PACK_INFO:
+ if (copy_to_user(argp, &Adapter->PackInfo, sizeof(struct bcm_packet_info)*NO_OF_QUEUES))
+ return -EFAULT;
+ Status = STATUS_SUCCESS;
+ break;
+
+ case IOCTL_BCM_SWITCH_TRANSFER_MODE:
+ Status = bcm_char_ioctl_switch_transfer_mode(argp, Adapter);
+ return Status;
+
+ case IOCTL_BCM_GET_DRIVER_VERSION:
+ Status = bcm_char_ioctl_get_driver_version(argp);
+ return Status;
+
+ case IOCTL_BCM_GET_CURRENT_STATUS:
+ Status = bcm_char_ioctl_get_current_status(argp, Adapter);
+ return Status;
+
+ case IOCTL_BCM_SET_MAC_TRACING:
+ Status = bcm_char_ioctl_set_mac_tracing(argp, Adapter);
+ return Status;
+
+ case IOCTL_BCM_GET_DSX_INDICATION:
+ Status = bcm_char_ioctl_get_dsx_indication(argp, Adapter);
+ return Status;
+
+ case IOCTL_BCM_GET_HOST_MIBS:
+ Status = bcm_char_ioctl_get_host_mibs(argp, Adapter, pTarang);
+ return Status;
+
+ case IOCTL_BCM_WAKE_UP_DEVICE_FROM_IDLE:
+ if ((false == Adapter->bTriedToWakeUpFromlowPowerMode) && (TRUE == Adapter->IdleMode)) {
+ Adapter->usIdleModePattern = ABORT_IDLE_MODE;
+ Adapter->bWakeUpDevice = TRUE;
+ wake_up(&Adapter->process_rx_cntrlpkt);
+ }
+
+ Status = STATUS_SUCCESS;
+ break;
+
+ case IOCTL_BCM_BULK_WRM:
+ Status = bcm_char_ioctl_bulk_wrm(argp, Adapter, cmd);
+ return Status;
+
+ case IOCTL_BCM_GET_NVM_SIZE:
+ Status = bcm_char_ioctl_get_nvm_size(argp, Adapter);
+ return Status;
+
+ case IOCTL_BCM_CAL_INIT:
+ Status = bcm_char_ioctl_cal_init(argp, Adapter);
+ return Status;
+
+ case IOCTL_BCM_SET_DEBUG:
+ Status = bcm_char_ioctl_set_debug(argp, Adapter);
+ return Status;
+
+ case IOCTL_BCM_NVM_READ:
+ case IOCTL_BCM_NVM_WRITE:
+ Status = bcm_char_ioctl_nvm_rw(argp, Adapter, cmd);
+ return Status;
+
+ case IOCTL_BCM_FLASH2X_SECTION_READ:
+ Status = bcm_char_ioctl_flash2x_section_read(argp, Adapter);
+ return Status;
+
+ case IOCTL_BCM_FLASH2X_SECTION_WRITE:
+ Status = bcm_char_ioctl_flash2x_section_write(argp, Adapter);
+ return Status;
case IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP: {
struct bcm_flash2x_bitmap *psFlash2xBitMap;