* Copyright (C) 2002, 2006 David S. Miller (davem@davemloft.net)
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#define NUM_SUNZILOG num_sunzilog
#define NUM_CHANNELS (NUM_SUNZILOG * 2)
-#define KEYBOARD_LINE 0x2
-#define MOUSE_LINE 0x3
-
#define ZS_CLOCK 4915200 /* Zilog input clock rate. */
#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */
unsigned long flags;
int baud, brg;
+ if (up->port.type != PORT_SUNZILOG)
+ return -1;
+
printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n",
(sunzilog_reg.minor - 64) + con->index, con->index);
{
int baud, brg;
- if (channel == KEYBOARD_LINE) {
- up->flags |= SUNZILOG_FLAG_CONS_KEYB;
+ if (up->flags & SUNZILOG_FLAG_CONS_KEYB) {
up->cflag = B1200 | CS8 | CLOCAL | CREAD;
baud = 1200;
} else {
- up->flags |= SUNZILOG_FLAG_CONS_MOUSE;
up->cflag = B4800 | CS8 | CLOCAL | CREAD;
baud = 4800;
}
}
#ifdef CONFIG_SERIO
-static void __init sunzilog_register_serio(struct uart_sunzilog_port *up, int channel)
+static void __init sunzilog_register_serio(struct uart_sunzilog_port *up)
{
struct serio *serio = &up->serio;
serio->port_data = up;
serio->id.type = SERIO_RS232;
- if (channel == KEYBOARD_LINE) {
+ if (up->flags & SUNZILOG_FLAG_CONS_KEYB) {
serio->id.proto = SERIO_SUNKBD;
strlcpy(serio->name, "zskbd", sizeof(serio->name));
} else {
strlcpy(serio->name, "zsms", sizeof(serio->name));
}
strlcpy(serio->phys,
- (channel == KEYBOARD_LINE ? "zs/serio0" : "zs/serio1"),
+ ((up->flags & SUNZILOG_FLAG_CONS_KEYB) ?
+ "zs/serio0" : "zs/serio1"),
sizeof(serio->phys));
serio->write = sunzilog_serio_write;
(void) read_zsreg(channel, R0);
}
- if (up->port.line == KEYBOARD_LINE ||
- up->port.line == MOUSE_LINE) {
+ if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |
+ SUNZILOG_FLAG_CONS_MOUSE)) {
sunzilog_init_kbdms(up, up->port.line);
up->curregs[R9] |= (NV | MIE);
write_zsreg(channel, R9, up->curregs[R9]);
spin_unlock_irqrestore(&up->port.lock, flags);
#ifdef CONFIG_SERIO
- if (up->port.line == KEYBOARD_LINE || up->port.line == MOUSE_LINE)
- sunzilog_register_serio(up, up->port.line);
+ if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |
+ SUNZILOG_FLAG_CONS_MOUSE))
+ sunzilog_register_serio(up);
#endif
}
-static int __devinit zs_get_instance(struct device_node *dp)
-{
- int ret;
-
- ret = of_getintprop_default(dp, "slave", -1);
- if (ret != -1)
- return ret;
-
- if (of_find_property(dp, "keyboard", NULL))
- ret = 1;
- else
- ret = 0;
-
- return ret;
-}
-
static int zilog_irq = -1;
-static int __devinit zs_probe(struct of_device *dev, const struct of_device_id *match)
+static int __devinit zs_probe(struct of_device *op, const struct of_device_id *match)
{
- struct of_device *op = to_of_device(&dev->dev);
+ static int inst;
struct uart_sunzilog_port *up;
struct zilog_layout __iomem *rp;
- int inst = zs_get_instance(dev->node);
+ int keyboard_mouse;
int err;
+ keyboard_mouse = 0;
+ if (of_find_property(op->node, "keyboard", NULL))
+ keyboard_mouse = 1;
+
sunzilog_chip_regs[inst] = of_ioremap(&op->resource[0], 0,
sizeof(struct zilog_layout),
"zs");
rp = sunzilog_chip_regs[inst];
- if (zilog_irq == -1) {
+ if (zilog_irq == -1)
zilog_irq = op->irqs[0];
- err = request_irq(zilog_irq, sunzilog_interrupt, SA_SHIRQ,
- "zs", sunzilog_irq_chain);
- if (err) {
- of_iounmap(rp, sizeof(struct zilog_layout));
-
- return err;
- }
- }
up = &sunzilog_port_table[inst * 2];
up[0].port.line = (inst * 2) + 0;
up[0].port.dev = &op->dev;
up[0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A;
- if (inst == 1)
+ if (keyboard_mouse)
up[0].flags |= SUNZILOG_FLAG_CONS_KEYB;
sunzilog_init_hw(&up[0]);
up[1].port.line = (inst * 2) + 1;
up[1].port.dev = &op->dev;
up[1].flags |= 0;
- if (inst == 1)
+ if (keyboard_mouse)
up[1].flags |= SUNZILOG_FLAG_CONS_MOUSE;
sunzilog_init_hw(&up[1]);
- if (inst != 1) {
+ if (!keyboard_mouse) {
err = uart_add_one_port(&sunzilog_reg, &up[0].port);
if (err) {
of_iounmap(rp, sizeof(struct zilog_layout));
of_iounmap(rp, sizeof(struct zilog_layout));
return err;
}
+ } else {
+ printk(KERN_INFO "%s: Keyboard at MMIO %lx (irq = %d) "
+ "is a zs\n",
+ op->dev.bus_id, up[0].port.mapbase, op->irqs[0]);
+ printk(KERN_INFO "%s: Mouse at MMIO %lx (irq = %d) "
+ "is a zs\n",
+ op->dev.bus_id, up[1].port.mapbase, op->irqs[0]);
}
- dev_set_drvdata(&dev->dev, &up[0]);
+ dev_set_drvdata(&op->dev, &up[0]);
+
+ inst++;
return 0;
}
static int __init sunzilog_init(void)
{
struct device_node *dp;
- int err;
+ int err, uart_count;
+ int num_keybms;
NUM_SUNZILOG = 0;
- for_each_node_by_name(dp, "zs")
+ num_keybms = 0;
+ for_each_node_by_name(dp, "zs") {
NUM_SUNZILOG++;
+ if (of_find_property(dp, "keyboard", NULL))
+ num_keybms++;
+ }
+ uart_count = 0;
if (NUM_SUNZILOG) {
int uart_count;
err = sunzilog_alloc_tables();
if (err)
- return err;
+ goto out;
- /* Subtract 1 for keyboard, 1 for mouse. */
- uart_count = (NUM_SUNZILOG * 2) - 2;
+ uart_count = (NUM_SUNZILOG * 2) - (2 * num_keybms);
sunzilog_reg.nr = uart_count;
sunzilog_reg.minor = sunserial_current_minor;
err = uart_register_driver(&sunzilog_reg);
- if (err) {
- sunzilog_free_tables();
- return err;
- }
+ if (err)
+ goto out_free_tables;
+
sunzilog_reg.tty_driver->name_base = sunzilog_reg.minor - 64;
sunzilog_reg.cons = SUNZILOG_CONSOLE();
sunserial_current_minor += uart_count;
}
- return of_register_driver(&zs_driver, &of_bus_type);
+ err = of_register_driver(&zs_driver, &of_bus_type);
+ if (err)
+ goto out_unregister_uart;
+
+ if (zilog_irq != -1) {
+ err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED,
+ "zs", sunzilog_irq_chain);
+ if (err)
+ goto out_unregister_driver;
+ }
+
+out:
+ return err;
+
+out_unregister_driver:
+ of_unregister_driver(&zs_driver);
+
+out_unregister_uart:
+ if (NUM_SUNZILOG) {
+ uart_unregister_driver(&sunzilog_reg);
+ sunzilog_reg.cons = NULL;
+ }
+
+out_free_tables:
+ sunzilog_free_tables();
+ goto out;
}
static void __exit sunzilog_exit(void)
MODULE_AUTHOR("David S. Miller");
MODULE_DESCRIPTION("Sun Zilog serial port driver");
+MODULE_VERSION("2.0");
MODULE_LICENSE("GPL");
git.openpandora.org / pandora-kernel.git / blobdiff